Beli mesin bor lubang dalam bekas (66)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 106341-11, Tahun pembuatan: 2005, berat keseluruhan: 8.000 kg, tinggi total: 2.700 mm, panjang total: 5.660 mm, lebar total: 3.956 mm, The drilling process of the deep hole drilling machine utilizes single-lip drill technology. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 - 8,000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Min./max. drilling diameter: 3 - 25 mm based on ST 60 - Max. spiral drilling diameter: 25 mm - Max. thread tapping: M24x3 - Material removal rate (milling): 150 cm³/min Traverse Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep hole drilling oil Iedpfow E H E Rox Adgetl - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic power pack and pneumatic unit/equipment - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration rate: 120 l/min For machining steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and gear-driven spindle drive. Spindle supported with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Carrier: - Design as double turret with electromechanical swivel unit - Indexing via Hirth coupling - Turret head with holders for: Tool guides for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushes - Disc magazine design with 20 positions including approach stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30'' - Maximum load (centrically): 1,500 daN Workpiece Clamping Devices: - 1x tailstock with manually actuated clamping movement - 1x NC indexing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping of drill bushes + support prisms Electrical Equipment Information: - 1x Sinumerik 840D CNC control (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Isdpfst Hwucex Adgstl Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Kondisi: bekas, Tahun pembuatan: 1996, Maximum core drilling diameter: 25 mm Drilling depth: 1000 mm Swing diameter: mm Total power requirement: 25 kW Machine weight approx.: 12.5 t Space requirements approx.: m T B T CNC-controlled horizontal deep hole drilling machine Type: BWP 250 Year of manufacture: 1996, mechanically and electrically overhauled in 2006 Working area: - X axis = Drill carriage travel: approx. 2,000 mm - Z axis = Drill carriage stroke: approx. 1,200 mm - Drilling depth with 2 steadies: approx. 1,000 mm - Y axis = Drill carriage vertical travel: approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Iodpjt Hw Aysfx Adgstl Drilling capacity – solid material: approx. 4 – 25 mm diameter Tool holder: HSK 50 Spindle speed: 1,260 – 15,000 rpm Feeds / rapid traverse for Z/X/Y axes continuously variable: 100 – 10,000 / 15,000 mm/min Feed drive power: 27 Nm / 1,000 daN Spindle drive power: 7 kW Total drive approx.: 30 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Equipment: - Ideal machine for complete machining of larger workpieces, moulds, and plates using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, keyway milling up to Ø 30, spiral drilling/enlarging up to Ø 30, countersinking, and thread tapping up to M 24 x 3. - SIEMENS 840 D 4-axis CNC control with process monitoring, etc. - High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds - Pneumatic workpiece-contact drill sleeve carrier (200 mm), dual-swivel - Fixed 12-pocket tool changer by MIKSCH, Type CTM 40 with 800 mm travel, suitable for spiral drills, end mills and tapping tools; changing from ELB deep hole drills to standard tools is manual - The table is stationary, designed for high workpiece weights and accurate drilling - Mounted on the table: FIBRO CNC rotary indexing table Type RTN 400 = 420 x 420 mm as B-Axis - Optional: Hydraulic FIBRO rotary indexing table, Ø 1,000 mm, for division 3–144 or angle degrees 2.5–120° - Large coolant system approx. 11 kW pump with scraper belt chip conveyor and various filters - 2 support steadies for supporting the deep hole drill shafts - Full machine enclosure with side and front access Condition: very good – a truly rare opportunity, can be demonstrated under power soon Delivery: ex stock here Payment: strictly net upon receipt of invoice We look forward to your order. For further information, please do not hesitate to contact us.

Kondisi: sangat baik (bekas), Boring depth 500 mm Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors, the following from stock, non-binding: DEGEN Universal Deep Hole Drilling Machine Model UTB 500-2 Year of manufacture - _____ Boring depth 650 mm Drilling diameter with twist drill 16 mm Drilling diameter with single-lip drill 25 mm Spindle taper SK40 Stepless feed rate 0-120 mm Rapid traverse rpm Drilling unit vertically adjustable 250 mm Table size 570x1000 mm 4 T-slots 14 mm T-slot spacing 90 mm Table load capacity 1000 kg Table transverse travel 460 mm Table swivels through 360° Weight approx. 1,600 kg Accessories / Special equipment: • Compact freestanding design on a robust base • Deep drilling up to 500 mm length possible — ideal for longer drilling operations in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • The machine features digital readouts for X and Y axes (RSF Elektronik type Z 502, 0.01 mm display resolution) • A solid solution for workshops with the need for deep, straight drilling, as long as very large diameters or complex operations are not required • The Degen UTB 500 has been extensively modernized – now with Lenze feed drive, overhauled Y-axis, new glass scale encoder, new spindle bearings and new gas strut – delivering reliable precision and high performance Condition: good to very good – under power and ready for demonstration A video of the machine can be found here (please click the link): UTB 500/4 Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Itodjxx A D Tepfx Adgsl We look forward to your order. More tool grinding machines in stock – please enquire!

Kondisi: bekas, Tahun pembuatan: 1985, Core drilling diameter – max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofit and modernization by TBT _____ Drilling – solid drilling approx. 1 – 18 mm Drilling – counterboring approx. 25 mm Drilling depth 320 mm Center height above bed/table 150 mm Travel of drilling slide max. approx. 500 mm Travel of positioning slide (linear guides) 500 mm Spindle center distance 125 mm Isdpfx Aot Hwvaedgetl Drilling feed/rapid traverse stepless approx. 35 – 1,000/7,000 mm/min Center distance between the spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive power of the complete machine approx. 33 kW – 400 V – 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump parts (Ø approx. 25 x 150 mm, hole approx. 5 mm) which are loaded via an inclined conveyor into a dual positioning station for correct orientation check, and then automatically and in pairs via a crosswise to the machine mounted loading portal (2 x double grippers) clamped in the machining zone between drilling bush holder and powered tailstock. After machining, the second pair of grippers takes over the workpieces and transfers them to a blow-off and drill breakage detection station. After successful inspection, the workpieces drop into transport containers. - The process programming and monitoring is handled by a SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated HF spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw spindle - Separate coolant oil system approx. 1,500 liters with various pumps and a sophisticated belt filter purification system - Separate hydraulic system approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate electrical and control cabinets, CE-marked Condition: good to very good – soon ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.250 mm, panjang pemakanan sumbu X: 1.700 mm, panjang umpan sumbu Y: 800 mm, panjang umpan sumbu Z: 600 mm, berat benda kerja (maks.): 6.000 kg, jarak pergerakan sumbu X: 1.700 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 600 mm, kecepatan spindel (maks.): 4.200 rpm, kapasitas pengeboran: 30 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, - Kontrol HEIDENHAIN TNC 620 - Handwheel elektronik - Ukuran meja 1000 x 1000 mm - Sistem pergantian meja manual dengan meja TITIK NOL - Rotasi meja sumbu B 360.000 posisi/putaran Iedpszixyrefx Adgotl - Kemiringan meja sumbu A +/- 22,5° - Spindel bor dalam 11 kW / 6000 RPM - Spindel milling ISO 40 / 13 kW / 6000 RPM - Magasin alat ISO 40, 24 tempat - Penyedot asap AR FILTRAZIONI - Sertifikasi CE

Kondisi: baru, This is a new machine manufactured in Romania by the company Emsil. Customer specifications can be accommodated depending on technical feasibility and are subject to prior review by the manufacturer's engineering department. About the spindles: Narwhal is equipped with a boring spindle made of hardened, tempered, and alloyed steel, mounted with preloaded angular contact precision ball bearings. The machine also features a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and is also equipped with angular preloaded precision ball bearings. It operates on bronze guide bushings. The clamping devices for both units, which serve to attach and release the ISO 50 taper tool holder, open and close automatically. Rotary Table: Table rotation is achieved via a double-pinion gear drive, a central supported shaft, and a hydrostatic slide block in the central bearing dimensioned to ensure maximum precision even under heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes are equipped with a direct measuring system. CNC Axis Control: All 9 axes of the machine are continuously monitored. The monitoring system is equipped with a 15'' TFT screen, operator panel, remote diagnostics to alert users in the event of faults, user memory, network connectivity, remote process control, integrated PLC, etc. The machine is compatible with various control systems, including Heidenhain, Fanuc, Siemens, and others. You can select the machining sizes for X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500 mm as per your requirements. Itsdpfxju Id H Ao Adgsl Best regards,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.500 mm, panjang pemakanan sumbu X: 2.030 mm, panjang umpan sumbu Y: 1.800 mm, panjang umpan sumbu Z: 1.700 mm, panjang meja: 2.200 mm, lebar meja: 1.800 mm, beban meja: 12.000 kg, Mesin Bor Lubang Dalam Ixion (Kedalaman Bor 1500mm, X 2030mm, Y 1800mm, Z 1700mm) Mesin dasar adalah mesin bor PEGARD AF 13 (tahun pembuatan 1976, berat mesin sekitar 32 ton) Retrofit dan konversi ke TLB pada tahun 1996 (konversi dilakukan oleh ROTTLER Maschinenbau GmbH - Mudersbach) Perbaikan 2024 (bearing spindle diperbarui, penyangga bushing bor/pasokan pendingin dibongkar dan dibersihkan, hidrolik penjepit alat diperbaiki, unit pendingin dan agregat hidrolik dibersihkan dan diperiksa, dll) Lintasan kerja: Iedpfx Adey Rhzwjgotl - Sumbu X (memanjang) 2030mm - Sumbu Y (unit bor vertikal) 1800mm - Sumbu Z 1700mm - Kedalaman bor sekali jalan 1500mm - Sumbu B (meja putar) 0-360° Unit pembor: - Spindel utama ISO40 - Kecepatan spindel 60-6000 rpm - Daya penggerak pada 100% duty cycle 7,5kW Meja Putar NC (Sumbu B): - Area meja 2200x1800mm - Sumbu putar 0-360° - Kapasitas beban maksimum 12.000kg - Akurasi posisi +/-15 detik Sistem Pendingin/Conveyor Serpihan: - Kapasitas tangki sekitar 1000l - Tekanan pendingin maksimum 80bar - Debit maksimum 46l/menit - Filter pita kertas - Conveyor scraper/conveyor serpihan Kontrol CNC: - Mitsubishi M325 dengan layar warna 14" - Pemantauan kerusakan alat terintegrasi melalui pembacaan torsi spindle utama - Visualisasi nilai proses torsi secara real-time - Program teknologi deep drilling - Handwheel elektronik portabel

Kondisi: baik (bekas), kedalaman pengeboran: 1.500 mm, panjang pemakanan sumbu X: 2.000 mm, panjang umpan sumbu Y: 1.300 mm, panjang umpan sumbu Z: 1.500 mm, Hersteller: TBT Tiefbohrtechnik Modell: BW 250-S Steuerung: SIEMENS 840D Baujahr: 2007 Bohren, Fräsen und Gewindeschneiden für Wärmetauscherböden und -platten Schwenkbare A-Achse: +25 bis -15 Grad Filtrations- und Kühlsystem: 1.000 Liter Späneförderer: 2.000 x 1.200 mm Auswurfhöhe Fräswerkzeug-Wechselsystem Tower Station mit 20 Werkzeugplätzen ELB-Bohrkapazität: 3 - 35 mm Fräskapazität: 250 cm³/Min Verfahrwege aller Achsen: 15.000 mm/Min (X-Y-W-Z) Maschine im Betrieb: ca. 15.000 Spindelstunden Umfangreiches Werkzeugpaket Technische Daten Max. Bohrdurchmesser (Stahl): 40 mm Bohrtiefe: 1.500 mm X-Achse: 2.000 mm Y-Achse: 1.300 mm Z-Achse: 1.500 mm Ijdpfx Adsv A Uw Degotl W-Achse: 750 mm Tischbelastung: 15.000 kg Tischabmessung (L x B oder Durchmesser): 1.600 x 1.200 mm Spindelaufnahme: HSK 63 Mk Spindelleistung: 11 kW Drehzahl: 8.000 U/min Abmessungen (ca.): Länge: 7.200 mm Breite: 7.800 mm Höhe: 4.250 mm Gewicht: 23.000 kg Bitte beachten Sie: Die Angaben auf dieser Seite wurden nach bestem Wissen und Gewissen von uns und, so weit möglich, vom Hersteller bezogen. Die Informationen werden in gutem Glauben bereitgestellt, jedoch kann für die Richtigkeit keine Gewähr übernommen werden. Eine vertragliche Zusicherung oder Garantie kann daraus nicht abgeleitet werden. Wir empfehlen Ihnen, alle wichtigen Details separat zu überprüfen.

Kondisi: sangat baik (bekas), de__1 Itodpfex Tp Ahex Adgel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, kedalaman pengeboran: 350 mm, berat benda kerja (maks.): 1.600 kg, beban meja: 1.600 kg, Deep Hole Drilling Machine Mollart - LD8 - 150 Pellet Die MACH-ID 9428 Manufacturer: Mollart Model: LD8 - 150 Pellet Die Control: FANUC Power MATE Year of manufacture: 2009 Number of spindles: 8 Deep hole drilling diameter range: 1.5 mm – 10 mm (per spindle) Maximum drilling depth: 150 mm Drill spindle stroke: 350 mm Die diameter (pellet die): 500 mm – 1550 mm B-axis accuracy: ± 6 arc seconds Y-axis vertical travel: 400 mm Deep drilling speed range: 0 – 14,000 rpm Max. drilling diameter in steel: 1.5 - 10 mm Drilling depth: 350 mm Table load capacity: 1,600 kg Rotational speed: 14,000 rpm Dimensions (approximate) Length: 4,500 mm Width: 4,500 mm Itjdpfx Asyilgdsdgjl Height: 2,300 mm Weight: 12,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend that you verify all important details.

Kondisi: baik (bekas), Tahun pembuatan: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Model: M200-2-850 Number of spindles: 2 Drill slide stroke: 850 mm Drilling process: Single-lip deep hole drilling Drilling depth with: Plunging spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – Self-driven Feed rate: 20 – 500 mm/min Rapid traverse speed (NC operation): 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 RPM Tailstock Motor power: 0.75 kW at 1000 RPM Spindle speed: 500 RPM Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Itjdpsvca Rcjfx Adgjl Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided for the accuracy, completeness, or timeliness of the information.

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1996, For sale: IXION Deep Hole Drilling Machine TL 601 Please note: The machine currently has electrical issues. The machine constants need to be reloaded by a technician and the buffer battery should be replaced. A new LCD display (LED) was recently installed. Machine No.: 950192 Year of manufacture: 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travels- + Quill TL 601 (Z): 600 mm + Drilling unit vertical (Y): 300 mm + Table transverse (Table surface 1200 mm x 600 mm) (X): 700 mm + Drilling direction (W): 1000 mm -Clamping Table- + Standard table surface: 1200 mm x 600 mm + Table load (T1200): 1000 kg -Tool holder- + Mount: SK 40 as per DIN + Drawbar: 69871 as per DIN 69872 -AC Main spindle drive 3.0 kW- + At 100% duty cycle, S1: 5.5 kW + At 50% duty cycle, S6: 7.5 kW + Spindle speed, directly programmable: 100–4000 rpm -Performance- + Drilling capacity in steel 2312: D 32 mm + Tapping: M24 -Weight / Dimensions- Itodpfxjh Dpv Ro Adgjl Weight: 2500 kg Length approx.: 4230 mm Width approx.: 1885 mm Height approx.: 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machinery purchase / sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MUCH MORE Are you looking for a high-quality yet affordable metalworking machine for your manufacturing? Or do you want to sell yours?

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Kisaran diameter pengeboran 4mm - 16mm; Panjang komponen hingga 3.000mm; Sumbu ganda; Panjang keseluruhan kurang lebih 11 meter x lebar 900mm; (2) Bagian - Panjang bed headstock sekitar 5 meter, Panjang bed pengeboran sekitar 6 meter; (1) Chuck 4-jaw diameter 500mm, Lubang 120mm dengan Troyke DL-20-B, Sumbu keempat, Meja Putar Presisi diameter 500mm; Kontrol gantung; Lemari listrik mandiri (ukuran sekitar 3.000mm x 500mm x 1.900mm tinggi); Sistem filtrasi pendingin Technidrill terdiri dari konveyor serpihan LNS 'Turbo HB', sistem filter FSI 'CBFP 11' & tangki oli dengan pompa tekanan tinggi; Unit chiller Dimplex Koolant Koolers berdiri sendiri dengan kontrol (ukuran sekitar 700mm x 1.300mm x 1.850mm tinggi, tahun 2012). Itodey Ey E Rspfx Adgsl

Kondisi: belum diuji (bekas), Tahun pembuatan: 1970, - Drilling diameter: 5-30 mm - Drilling depth: 750 mm - Filter Itodpexzz Hofx Adgol - Pump

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.000 mm, sale-ad-tbt-t30-deep-hole-drill-fi Itedpfx Asy Rvc Aedgel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 660 mm, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 1.000 mm, diameter bor: 30 mm, RINCIAN TEKNIS Kedalaman bor: 660 mm Diameter bor: 30 mm Perjalanan sumbu X: 700 mm Perjalanan sumbu Y: 500 mm Perjalanan sumbu Z: 1.000 mm Perjalanan sumbu W: 250 mm Kecepatan spindel: 60 - 60.000 rpm Panjang meja: 900 mm Lebar meja: 500 mm Kapasitas beban meja: 2.000 kg RINCIAN MESIN Kontrol: Heidenhain iTNC530 Dimensi & Berat Dimensi (P x L x T): 3.706 x 3.960 x 2.650 mm Iedpfxeya U U Ue Adgstl Berat total: 8.000 kg PERLENGKAPAN Meja putar NC (sumbu ke-4) Konveyor serbuk (chip conveyor) Filter pita kertas Handwheel elektronik Dokumentasi asli

Kondisi: baru, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 15VWL1032, The machine comes with tooling for producing electrical connectors in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 The offer also includes original MSA drawings. The VWL 1200 is a vertical three-axis CNC machine for the placement of electrofusion fittings, designed for handling medium to large-sized fittings or pipes. The machine can typically produce fittings within an internal diameter range of 250 to 1400 mm (1400 mm SDR17). Optionally, a 2-axis CNC drilling unit is available for drilling fusion indicator holes during the wire laying cycle or for drilling terminal holes during the external profiling cycle. The VWL 1200 uses specialized fixtures that clamp onto an innovative element, which is an integral part of the coupling's structure; thus, each half of the coupling has a separate melting zone. The wire laying process starts at one terminal at the end of the coupling. The wire is laid at double the required pitch to the end of the fusion zone, after which the tool system rotates and then moves in the opposite direction between the first laid pitch up to the rest position at the second terminal. The process is completed in the second part of the coupling. Itjdpfxou Itk Ro Adgsl The VWL 1200 system is designed to enable loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine features a completely open top, allowing for easy overhead loading via a gantry system. Alternatively, parts can be loaded through the exceptionally wide operator door using appropriate gripping and handling equipment.

Kondisi: hampir baru (bekas), Mesin Bor Lubang Dalam Ryazan Model PT295106 x 4000mm Produsen: Ryazan Model: PT295106 Tahun: 1985 Kondisi: Bekas Nomor Stok: 2850 Itjdoxzp Rlepfx Adgel Tinggi Titik Tengah: 550mm Kapasitas Bor Padat: 200mm Panjang Maks Bor: 4000mm Headstock Spindle Berongga: 500mm Kecepatan Spindle Headstock: 16-250 rpm Daya Penggerak Headstock: 50/75kw Panjang Bor Maks di depan Headstock: 3500mm Panjang Bor Maks dengan spindle berongga 500mm: 4000mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, en Isdpfx Adsw Ekfuegotl

Kondisi: bekas, 1 Itjdpoy R Ef Tjfx Adgsl

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 600 mm, kecepatan rotasi (maks.): 6.000 rpm, tinggi pusat: 250 mm, model controller: SIEMENS Sinumerik 840 D, diameter benda kerja (maks.): 25 mm, 1 Itjdpfexpvbtsx Adgsl

Kondisi: bekas, Tahun pembuatan: 2006, Full drilling diameter: 150 mm Drilling depth: 13,000 mm Full drilling diameter: 150 mm Workpiece weight: 80 t Control: Siemens Type: S 7 Workpiece diameter: 1,250 mm Minimum workpiece dimensions: 2,000 mm Boring diameter: 450 mm Machine weight approx.: 160 t Spindle head adjustment: 10,000 mm Spindle box bed width: 1,600 mm, guideway width: 360 mm Spindle box center height: 1,600 mm Faceplate: 1,750 mm Drive: 60 kW Speed range: 2.62–200 rpm Itedeyqvcnspfx Adgel Bed for drilling unit Bed length: 27,000 mm Bed width: 1,320 mm, guideway width: 290 mm Bed height: 670 mm Drilling motor: 60 kW Drilling unit stroke: 920 mm The above technical data are provided by the manufacturer or operator and are therefore non-binding for us. Intermediate sale reserved; our terms and conditions of business and sale apply exclusively. About us - More than 400 machines in our own stock - Over 15,000 m² storage space, crane capacity up to 70 t - More than 10,000 accessory items for your workshop If you are looking to sell machines, production lines, or your business, please contact us. You can find more offers on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Kondisi: bekas, Tahun pembuatan: 1971, de-hu-001 Itjdpfjyt Rz Dsx Adgel

Kondisi: bekas, de-hu-01 Itedpfxeyqt Hdo Adgol