Beli Gubisch bekas (14)

Kondisi: baik (bekas), Dijual sebuah mesin planer empat sisi merek Gubisch. Iiedpfx Aex Dm S Seahjk Teknis dalam kondisi sempurna, tampilan secara visual baik dan layak pakai. Spesifikasi mesin: Dimensi maksimum: 180mm x 120mm Dimensi minimum: 18mm x 6mm Maks. kedalaman pemotongan: 10mm Tekanan kerja: 6 bar

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, Cross-cut circular saw with 2 x double shafts. Vertical and horizontal. For cutting battens, strips, laths, and separation cuts. With narrow kerf. Max. cutting height: 200 mm. Max. cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed rate with frequency control from 0 - 40 m/min. 8 pairs of driven rollers. Pneumatic, adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with control system. Saw bushings and tools included. Sound-insulated operator cabin. The machine is in very good condition and was only used occasionally. There is no visible wear on the feed rollers. Not in operation for the past 12 years. Mechanisation: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated cross discharge conveyor. With adjustable feed gearbox. The mechanisation is older. Ijdpsx Ap Dzofx Aahsik Electrical control cabinet with control system. Multi-blade saw Gubisch Grimme Cross-cut multi-rip saw Multi-blade saw for lamellas Circular saw for cross-cutting with 2 double shafts. Vertical and horizontal. For cutting battens, strips, laths, separation cuts. With narrow cutting line. Max cutting height: 200 mm. Max cutting width: 200 mm. Clamping sleeves: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed rate frequency-controlled from 0 - 40 m/min. 8 pairs of driven rollers. Pneumatic, adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electric control cabinet. Saw bushings and tools included. Sound-insulated cabin. The machine is very well maintained and was only used sporadically. No visible wear on the feed rollers. Not used for 12 years. Mechanisation: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated cross scraper conveyor. With adjustable feed gearbox. Mechanisation is older. Electric control cabinet with control system.

Kondisi: bekas, Tahun pembuatan: 1996, bmh-vierseitenhobelmaschine-1996 Isdpfxewniqbe Aahjik

Kondisi: bekas, Tahun pembuatan: 1998, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 GUBISCH – CENTROMAT CW 2 For sale on behalf of customer, ex location ----- Manufacturer’s Description: ----- For the production of windows and doors, with 50 mm spindle diameter for longitudinal profiling. Features the following machining stations and capabilities: - Single-sided slotting unit for straight and angled connections; milling unit for longitudinal profiling - Rebating operation with climb-cut milling unit and automatic infeed Swiveling frame support up to 650 mm - Central control panel 1.0 Cross-cut saw, automatic top infeed ----- Motor power, incl. motor brake: 3.0 kW Spindle speed: 2,800 rpm Flywheel diameter: 350 mm Spindle diameter: 30 mm Clamping flange, 1 driver 6 mm dia. TK 42, 120 mm diameter Vertical travel, pneumatic: 100 mm Horizontal travel, pneumatic: 160 mm Iiedpfx Ajw I Eawoahsk against 2 manually adjustable 6-position turret stops Chip extraction hood with 100 mm diameter extraction port 2.0 Slotting unit ----- Motor power, incl. motor brake: 9.2 kW Spindle speed: 3,800 rpm Flywheel diameter: 320 mm Spindle diameter: 50 mm Usable spindle length: 320 mm Vertical stroke, pneumatically fixed: 2 x 100 mm Suitable for 3 tool sets, each 100 mm Zero height: 10 mm Chip extraction hood with 160 mm diameter extraction port 3.0 Slotting table ----- Table height above floor: 920 mm Feed rate, 4 speeds freely adjustable: - 1. Milling, angled window, and jog speed set on control panel (approx. 7 m/min) - 2. Sawing speed approx. 7 m/min (adjustable on device) - 3. Transfer speed approx. 10 m/min (adjustable on device) - 4. Return speed / without machining approx. 25 m/min (adjustable on device) - Motor power, incl. motor brake: 0.37 kW Workpiece clamping: pneumatic oscillating pressure shoes Workpiece clamping: pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter batten device Automatic counter batten changer with 2-way auto-change and, after manual rotation of 180 degrees, 2 further counter battens can be changed, which can also be changed automatically 3.2 Length stop ----- - Stop system with 3 scales for: - a) Outer frame - b) Sash vertical - c) Sash crosswise, manual adjustment - Length with attachable extension: 3000 mm - Swivel for angled windows +/- 60 degrees 3.3 Angle transfer – automatic via vertically synchronized feed roller in milling feed 4.0 Milling unit For longitudinal profiling and rebating of windows/doors with following units: ----- 4.1 First profiling milling unit ----- - Contra-rotating - Climb-cut with automatic plunge for rebating - Motor power incl. motor brake: 9.2 kW - Spindle speed: 6,000 rpm - Flywheel diameter: 240 mm max. - Spindles adjustable for zero diameter: 140 mm max. of tools, 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm - Usable spindle length: 320 mm - Vertical stroke, pneumatically fixed - Suitable for 4 tool sets each 80 mm, 3 x 80 mm - Horizontal stroke, pneumatic: 80 mm - Chip extraction with extr...

Kondisi: bekas, Gubisch milling unit Spindle diameter: 40 mm Tool clamping length: 240 mm Iisdpfxsq E Iu Dj Aahek Total spindle length: 300 mm >> Very robust and stable steel construction

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, GUBISCH Centromat CW3 mesin bekas untuk pembuatan jendela dan pintu dengan poros Ø 50 mm pada pemprofilan memanjang Komponen berikut sudah diperbarui: Ijdsxgqluspfx Aaheik Kabel energi dan kabel listrik ke meja slot Mat peredam pada pelindung Selang pneumatik Bantalan untuk piringan kontra Sisi penyambung di area memanjang Encoder putar untuk spindle slot kedua Bantalan untuk meja slot PC telah dibersihkan dan dicek Berbagai silinder pneumatik Sabuk V

Kondisi: bekas, Tahun pembuatan: 1977, Gubisch mesin serut Tipe: 172/2 Tahun pembuatan: 1977 Lebar penyerutan: 170 mm Tinggi penyerutan: 120 mm Diameter spindle: 40 mm Posisi spindle: Bawah 4 kW Kanan 4 kW Kiri 5,5 kW Kanan 5,5 kW Atas 7,5 kW Atas/Bawah 7,5 kW Iiodsxfzlpepfx Aahsk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 220 mm, lebar perataan: 140 mm, berat keseluruhan: 2.700 kg, diameter poros mesin serut: 40 mm, Perlengkapan: rem mesin, a four-sided planer with five planing spindles; the last spindle is a universal spindle (tiltable). Bottom spindle: 5.5 kW, left/right each 4 kW (the left spindle is electrically adjustable), top spindle: 5.5 kW, universal spindle: 4 kW. Iedpfjt Srwpex Aahsik

Tahun pembuatan: 1971, Kondisi: bekas, Typ G617 Iiedpfjh U R T Sex Aahjk Arbeitsbreite: 170 mm Arbeitshöhe: 110 mm Einlauftischlänge: 1600 mm 7 Spindeln: U, R, O, L, R, O, U Spindeldurchmesser: 40 mm Vorschubgeschwindigkeit: 30 m/min Hergestellt in Deutschland, Baujahr 1971 Transportabmessungen: 4900 x 1100 x 1500 mm Gewicht: 3100 kg Preis: 2.400 EUR (EXW Jonava, Litauen)

Tahun pembuatan: 1980, Kondisi: baik (bekas), Gubisch Planer and Moulder 172/7 S/N 3425 80 Year of manufacture: 1980 Isdpfxjgrmyms Aaheik Length of jointer table: 1950 mm Maximum planing width: 170 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 7 planing spindles: 1. Bottom planing spindle 7.5 kW 2. Right edge trimming spindle 3.0 kW 3. Left spindle 4.0 kW 4. Right spindle 4.0 kW 5. Top thicknessing spindle 4.0 kW 6. Top thicknessing spindle 5.5 kW 7. Universal spindle, top/bottom 3.0 kW Voltage: 380 V, 50 Hz Power consumption: 33.6 kW Feed motor: 1.5 kW Infinitely variable feed speed: 5 – 30 m/min Weight: 3300 kg Dimensions (L x W x H): 4800 mm x 1400 mm x 1850 mm Technical data subject to change.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, jam operasional: 1.234 h, Fungsionalitas: berfungsi sepenuhnya, 1 GUBISCH - Window Production Line Type CENTROMAT-CD-SUPER (Output: 3–4 units per minute. Approximate number of units producible in 8 hours: 200 pcs.) Including the following machine components: 2 cross-cut saws > 2 electronically controlled cross-cut saws: yes > Number of tools: 1 pc. > Spindle speed: 3,000 rpm > Max. tool diameter: 350 mm > Motor power: 3 kW 2 left and 2 right vertical mortising spindles > Number of tools: 3 pcs. > Spindle stroke: 3x100 mm > Spindle speed: 4,200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 320 mm > Motor power: 11 kW 3 right vertical profiling spindles > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW 3 left vertical profiling spindles > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm Ijdpov A It Ssfx Aaheik > Motor power: 9.2 kW Further features: > Network compatible: yes > Double-part package: yes > Touchscreen control: yes Detailed description available on request.

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: belum diuji, tinggi penyerutan: 100 mm, lebar perataan: 180 mm, berat keseluruhan: 850 kg, 4 shafts horizontal bottom 4 kW Iiodewrdruspfx Aahsk vertical right 3 kW vertical left 3 kW horizontal top 4 kW 2 feed speeds: 6 + 12 m/min.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1988, de Iodjwntm Tepfx Aahjik

Tahun pembuatan: 1996, Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 16319, Max. working dimensions: 220 x 120 mm (raw wood dimensions max. 230 x 130 mm), min. working dimensions: 15 x 6 mm, automatic positioning "Hecht-Posiomat", feed rate 6 - 22 m/min, feed roller pressure 6 bar, spindle diameter D = 40 mm, max. stock removal 10 mm, infeed table 2,000 mm, feed motor 2.2 kW, height adjustment motor 0.37 kW, jointer spindle 4 kW, cutter spindle 4 kW, left profile spindle 4 kW, thicknessing spindle 5.5 kW, glazing bar cutting, ex location Seevetal, sold as seen in current condition, subject to prior sale, excluding freight and packaging Iiodpfxjh Euvme Aahok