Beli Gergaji bundar dingin – sepenuhnya otomatis – diameter mata gergaji 0–350 mm bekas (34)

Kondisi: baik (bekas), Tahun pembuatan: 1996, Abstand zwischen den Sägen bei 90° max.: 4000 mm Dkedogixvwopfx Ac Tsp Schnitthöhe bei 90°: 200 mm Schnittbreite: 130 mm Leistung: 5,1 kW Gewicht: 1260 kg

Kondisi: bekas, Tahun pembuatan: 2000, Kapasitas pemotongan maks. 90 mm Kontrol: Siemens S7 Dksdpfozh Ezasx Ac Tsp Dilengkapi dengan: Majalah pengisian otomatis Pengeluaran otomatis Penghalusan otomatis (deburring)

Kondisi: bekas, Tahun pembuatan: 2017, Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180x70 mm Cutting capacity at 45 degrees left: round 110 mm Cutting capacity at 45 degrees left: square 95 mm Cutting capacity at 45 degrees left: flat 135x60 mm Cutting capacity at 45 degrees right: round 120 mm Cutting capacity at 45 degrees right: square 100 mm Cutting capacity at 45 degrees right: flat 135x60 mm Vice opening 180 mm Saw blade dimensions 350x32x3.4 mm Speed 1700/3400 rpm Machine weight approx. 600 kg Semi-automatic cross-cut saw for sawing aluminium and light metal alloys. Bevel cuts from 45° right to 45° left, and saw head swiveling 0°-45° to the left. Control is via multiple microprocessors, while two NC-controlled axes allow programming of up to 1000 different cutting programs for the same material, each with different quantities and lengths. - New centralized control console on an articulated arm for easy operation of the machine from any working position, with the emergency stop always within reach. - Fieldbus communication system with dual microprocessor and serial connection. - Display with 20 characters x 4 lines showing the following technical parameters: number of programmed and executed cuts, saw band thickness, feed length, cutting time, ammeter, and display of over 100 diagnostic messages and warnings. Dkodpfjy Ruvbox Ac Tjp - New – Display and logging of alarm and error messages with the ability to view incidents that have occurred. New – 600 mm material feeder with cutting motor and ball screw mounted on opposing bearings. - New – Low-voltage control panel: polyester membrane keypad with thermoformed and raised pushbuttons and actuation signal. - Stroke movement of the saw bow is programmable directly from the control panel to adapt to the workpiece. - Ball-bearing mounted rotary table for smooth and precise rotation. - Clamping system with two frontally arranged vices, which can be freely positioned along the longitudinal axis of the workpieces. - Adjustable mechanical stops for the quick positioning of the head at angle settings at 0 and 45 degrees right and left.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Sawing capacity round: 115 mm Max. saw blade diameter: 350 mm Sawing capacity rectangular: 200 x 70 mm Sawing capacity square: 105 x 105 mm Sawing unit power: 6.5/8 kW Speed on sawing shaft: 1700/3400 rpm Maximum feed length: 9999 mm Shortest feed length: 10 mm Weight: 2300 kg Equipment: BEHRINGER SPS control Micro lubrication system Controlled zero point Cutting gap extension Machine light Vertical main clamping Non-return device Extraction system prepared (Keller extraction unit not included) Roller conveyor infeed approx. 5000 mm, self-made Dksdporz Rw Rsfx Ac Top

Kondisi: bekas, Gergaji BEHRINGER HBE321 A Dynamic Dkedpfjx Tvkxjx Ac Tjp

Kondisi: bekas, Tahun pembuatan: 2001, Sägeblattdurchmesser 350 mm Dedpjyvvpmofx Ac Tokp

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 460 mm, Rentang pemotongan baja bulat pada 90°: 152 mm, Gergaji bundar - Otomatis (bekas) Merek: KASTO Model: VARIOSPEED C15 Tahun pembuatan: sekitar 2008 Kontrol: Kontrol CNC KASTO DATA TEKNIS Dedpfxezd A Rqe Ac Tjkp Diameter mata gergaji maksimum: 460 mm Kapasitas potong bundar: 152 mm Kapasitas potong persegi: 135 mm Gerakan maju mata gergaji tanpa tingkat dari 8 mm/menit Gerakan maju mata gergaji tanpa tingkat hingga 1000 mm/menit Kecepatan potong: 150 m/menit Rahang penjepit hidrolik: ya DATA LISTRIK Daya terpasang (total): 28 kW Tegangan sambungan: 400 V Frekuensi jaringan: 50 Hz DIMENSI / BOBOT Kebutuhan ruang -kiri/kanan-: 10.600 mm Kebutuhan ruang -depan/belakang-: 4.500 mm Total tinggi: 2.340 mm Total berat: sekitar 3.900 kg Kondisi sangat baik Diservis 2x per tahun oleh produsen Kasto

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 460 mm, Rentang pemotongan baja bulat pada 90°: 152 mm, tinggi total: 2.340 mm, lebar total: 4.500 mm, kecepatan pemotongan: 150 mm/menit, berat keseluruhan: 3.900 kg, Gergaji bundar - Otomatis (bekas) Dkedpfx Acezd A Nts Tep Merek: KASTO Model: VARIOSPEED C15 Tahun pembuatan: sekitar 2008 Kontrol: CNC KASTO DATA TEKNIS Diameter pisau maksimal: 460 mm Kapasitas pemotongan bulat: 152 mm Kapasitas pemotongan persegi: 135 mm Kecepatan pengumpanan pisau (variabel) dari: 8 mm/menit Kecepatan pengumpanan pisau (variabel) hingga: 1000 mm/menit Kecepatan pemotongan: 150 m/menit Penjepit hidrolik: ya DATA LISTRIK Konsumsi daya total: 28 kW Tegangan listrik: 400 V Frekuensi jaringan: 50 Hz DIMENSI / BERAT Kebutuhan ruang - kiri/kanan: 10600 mm Kebutuhan ruang - depan/belakang: 4500 mm Tinggi keseluruhan: 2340 mm Berat total sekitar: 3900 kg Kondisi sangat baik Diservis dua kali setahun oleh produsen Kasto Dilengkapi dengan pengambilan menggunakan robot dan aksesori mesin mahal lainnya

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, 1234-5678-0001 Djdpfx Aezb Ngzjc Tskp

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Fully hydraulic circular saw automatic machine, Manufacturer: TRENNJAEGER Dkedpfx Acsza Hnms Tep Technical Data: Saw motor, pole-switchable: 1.5 / 2.0 kW Saw blade: 275 mm 6 cutting speeds: 16, 20, 25 m/min + 32, 40, 50 m/min - Integrated hydraulics - Safety enclosure with limit switch protection - 6 cutting speeds

Kondisi: bekas, Tahun pembuatan: 1990, Fungsionalitas: belum diuji, panjang total: 1.050 mm, tinggi total: 2.000 mm, lebar total: 1.800 mm, berat keseluruhan: 550 kg, kebutuhan tinggi: 2.000 mm, persyaratan ruang panjang: 1.050 mm, lebar yang dibutuhkan: 1.800 mm, KOM3178_DE Dkodpfx Aceyykive Top

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Dedpfx Acjy E Uk Ij Tokp Max. saw blade diameter: 325 mm Cutting range at 90° Round: 100 mm Square: 85 x 85 mm Rectangle (flat): 165 x 85 mm Speed range, infinitely variable: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single feed: up to max. 550 mm Multiple feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° sawing • Stepless speed range 20 - 100 rpm • Length setting via programming on the control panel • Speed and feed rate can be adjusted steplessly during operation via the control panel • Single and multiple feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 piece used saw blade • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Tahun pembuatan: 2004, Kondisi: baik (bekas), A well-maintained used double-mitre cold circular saw from KASTO, Model: "KASTOdisc A10" Dsdpfokfvhksx Ac Tekp - Fully automatic operation - Single cut mode - Hydraulic clamping vices - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter: 350 mm Cutting capacity: Round 90°/45°: 100/100 mm Square 90°/45°: 100x100/100x100 mm Rectangular 90°/45°: 170x100/130x100 mm Shortest remnant length in single cut at 90°: 30 mm Shortest remnant length in automatic mode at 90°: 260 mm Working height: 950 mm Dimensions (W x D x H): 1530 x 1348 x 1890 mm Weight: 980 kg For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change and errors excepted.

Kondisi: bekas, Saw blade diameter: up to 250 mm Cutting range at 90° (round): approx. 75 mm Cut length: 500 mm electrical connection: 380 V Saw drive: 0.75/1.1 kW Dksdpob N Ehdefx Ac Tep Space requirement: 1700/2100 x 900 x 1440 mm Weight: 355 kg

Tahun pembuatan: 1970, Kondisi: baik (bekas), nomor mesin/kendaraan: 1258, Saw blade diameter: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed rates: hydropneumatically steplessly adjustable Cut length: 5 - 1580 mm Saw drive: 380 V, 1.8/2.5 kW Dkedpfx Acsh I Dvnj Tep Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

Kondisi: baru, Tahun pembuatan: 2025, Cutting range round: 20 - 100 mm Cutting range square (W x H): 20 x 70 mm Shortest length of cut-off piece: 5 mm Shortest remnant length in automatic mode*: 65 mm Shortest remnant length in single stroke: 30 mm Length: 2300 mm Width incl. chip conveyor: 2260 mm Height: 2210 mm Height of material support: 925 mm Approx. machine weight: 3950 kg Total connected load: 26 kW Saw motor output: 18.5 kW Hydraulic motor output: 2.2 kW Infinitely variable cutting speed: 30-160 rpm Saw feed rate: 0.3-30 mm/s Automatic material feed length, single stroke: 800 mm Automatic material feed length, multiple stroke: 9999 mm Saw blade diameter: 360 mm Saw blade bore: 40 mm Saw blade thickness: 2.25 mm Standard equipment Fully enclosed guard according to CE standard Dsdpfx Aswaa Dvjc Tokp 45 degree servo feed CE electrical safety Main drive permanent magnet motor HMI + buttons Frequency converter Micro-lubrication system (2L) Chip extraction unit Cutting tube nozzle system Cabin air conditioning LED work light Automatic chip conveyor (spiral) Vise pressure regulator Motorized chip brush Top clamp Hydraulic cooling fan Automatic lubrication system Simple roller table Saw chip collection trolley 70 (L) Toolbox (wire brush, leveling pads, touch-up paint) Circular saw blade Optional equipment Optional: JLH-EHA Saw Master UL electrical safety Third vise Automation 1.5 m discharge material table 2 m servo discharge material table 5.5 m inclined powered magazine (rectangular material) 5.5 m inclined powered magazine (round material) 5.5 m magazine with belt feeder (round material)

Kondisi: baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, Type: VMS III - PV Machine No.: 8518 Year of Manufacture: 1980 Technical Data: Saw motor, 2-stage: 2.0 / 2.6 kW Saw blade: 350 mm 4 cutting speeds: 8.5 / 17 / 34 / 68 rpm Clamping range, flat/round: 200 / 120 mm Feed length, single stroke: 5 - 600 mm Feed length, double stroke: 1200 mm Dkodoy Dcmbspfx Ac Tjp

Kondisi: baru, en001 Dedpjd Iin Rjfx Ac Tokp

Kondisi: baru, Kapasitas Ø 10 - 75 mm Dodpoymf Ifefx Ac Tekp Motor gergaji 11 kW Motor hidrolik 3 kW Motor umpan gergaji 1,5 kW Siemens Motor pengumpan material 1,5 kW Siemens Kecepatan gergaji 70-160 rpm/menit Diameter mata gergaji Ø285 x 2,0 x 1,7 x 32 mm Rentang pemotongan min. 1000 mm Rentang pemotongan maks. 7000 mm Kontrol Siemens Hidrolik Katup Rexroth Cairan pendingin: minyak potong bubuk Kebutuhan ruang sekitar 2950x6800 mm Berat mesin sekitar 3500 kg GERD WOLFF GLS-75 Gergaji circular berkapasitas tinggi (otomatis penuh) Dari 10 mm hingga 75 mm baja, potong dengan cepat dan presisi segala jenis baja hanya dalam hitungan detik. Dilengkapi dengan komponen dari Jerman, kami menggabungkan rekayasa mesin Jerman dan Turki.

Kondisi: bekas, Tahun pembuatan: 2001, en-GB Dkodpfx Acswvbk As Tep

Kondisi: bekas, Tahun pembuatan: 2016, Diameter mata gergaji: 360 mm Lebar potong material bulat: 15 - 100 mm Lebar potong material persegi: 15 - 80 mm Dodpfxsv Nq Rme Ac Tekp Kecepatan pemotongan: 17 - 175 m/menit Kontrol: Easy Control KASTO Kebutuhan daya total: 21 kW Bobot mesin kira-kira 3,4 t Kebutuhan ruang kira-kira 3,3 x 1,6 x 2,2 m Gearbox gergaji sudah diperbarui oleh produsen pada 03/2023 Pengumpan material Pembuangan material Konveyor serpihan

Kondisi: baru, Manual Metal Circular Saw MKS 315 N Special Set / Art. No. 3620303SET Saw blade diameter: 315 mm Cutting diameter: 90 mm Stroke: -- mm Mitre cuts: -45° / +45° Rotation speed: 40 / 80 rpm Machine weight: approx. 165 kg Space requirements: approx. 1.0 x 1.15 x 1.48 m - Two cutting speeds - Swiveling machine head, adjustable 45° to the left and 45° to the right - Low-noise reduction gearbox running in an oil bath - Automatic membrane coolant pump with coolant filter - Vice with counter vice, quick clamping, and anti-burr jaws ensures precise, burr-free cuts - Lateral material support arm with roller - Vice can be swiveled 45° to the left and 45° to the right - Movable safety guard for optimal safety during cutting - Control handle with safety switch - Vice with counter vice, quick clamping, and anti-burr jaws - Lateral material support arm with roller - Longitudinally adjustable vice, suitable for longitudinal cuts and slotting Cutting capacities: 0° (round, solid): 55 mm 0° (round, pipe): 90 mm 0° (square, pipe): 80 x 80 mm 0° (rectangular, pipe): 115 x 70 mm -45° (round, solid): 50 mm -45° (round, pipe): 80 mm -45° (square, pipe): 70 x 70 mm Dkodpfxsibw Smj Ac Tjp -45° (rectangular, pipe): 70 x 70 mm +45° (round, solid): 50 mm +45° (round, pipe): 80 mm +45° (square, pipe): 70 x 70 mm +45° (rectangular, pipe): 70 x 70 mm

Kondisi: baru, Tahun pembuatan: 2025, Saw blade diameter: 370 x 3.0 x 40 mm Cutting diameter: 120 mm Stroke: -- mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: flat 180 x 100 mm Cutting range at 45 degrees: round left 120 / right 105 mm Cutting range at 45 degrees: square left 100 / right 100 mm Cutting range at 45 degrees: flat left 130 x 100 / right 130 x 10 mm Cutting range at 60 degrees: round 110 mm Cutting range at 60 degrees: square 90 mm Cutting range at 60 degrees: flat 90 x 100 mm Total power requirement: 1.8 / 2.2 kW Machine weight approx. 392 kg Space requirement approx. 700 x 900 x 1800 mm Dksdpfsvuz Rnox Ac Tep Description: - Mitre cuts left 60° and right 45° - Vice with double clamping arm - Robust prism guide for saw head (adjustable dovetail guide) - Chip brush - Automatic cooling system - Metal handle for high clamping force - Solid, heavy-duty cast iron table

Kondisi: bekas, Tahun pembuatan: 1998, Saw blade diameter: 350 mm Cutting diameter: 110 mm Cutting capacity at 90°: flat 180 x 85 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: flat 130 x 85 mm Cutting capacity at 60°: round 105 mm Djdpfoxabzyox Ac Tskp Cutting capacity at 60°: flat 90 x 85 mm Speed: 9-18-36-74 rpm Maximum vise opening: 180 mm Control: IMET CNC Total power requirement: 1.5 / 2.2 kW Weight: 710 kg Dimensions (L x W x H): 2000 x 1100 x 2000 mm Current list price: approx. €25,000 Special price on request Circular saws are used for cutting thin-walled tubes and profiles. The circular saw delivers clean, precise cut edges. Fast sawing and easy miter adjustment are key advantages of the circular saw. Proper cooling of materials should always be observed. For metallic materials, the use of coolant lubrication is essential. For non-metallic materials, such as plastics, brass, and cast iron, coolant lubrication is not required. Selecting the correct tooth pitch is crucial for the optimal use of metal circular saw blades. The ideal tooth pitch depends on the cross-section and quality of the material to be machined. Equipment: - CNC fully automatic, vertically guided metal circular saw - Swiveling CNC control panel on the front left * Input of parameters such as quantity and material length - Precision prism guide for the gearbox head, laterally adjustable - Hydro-pneumatic control of the saw unit - With automatic material feed & piece counter * Electro-pneumatic material feed unit - Smooth-running, high-performance worm gear drive * With large gear ratio - Miter adjustment via large rotary table - Infinitely variable saw blade lowering - Pneumatic material clamping - Sturdy base with integrated automatic cooling system & large chip drawer - Micro-spraying unit, also for stainless steel cuts (untested) - Safety device for the feed unit (cover) - Saw blade guard - Operating manual (PDF) * Machine link: ?machineno=1008-9164086

Kondisi: bekas, Tahun pembuatan: 1989, Cutting diameter 260 mm Dkedpfopxri Uox Ac Tep Serial number 109967 Voltage 380 V Frequency 50 Hz Machine weight approx. 500 kg Mitre