Gergaji dingin

MEP Cobra 352 NC 5.0

Cutting capacity at 90 degrees: round 120 mm
Cutting capacity at 90 degrees: square 105 mm
Cutting capacity at 90 degrees: flat 180x70 mm
Cutting capacity at 45 degrees left: round 110 mm
Cutting capacity at 45 degrees left: square 95 mm
Cutting capacity at 45 degrees left: flat 135x60 mm
Cutting capacity at 45 degrees right: round 120 mm
Cutting capacity at 45 degrees right: square 100 mm
Cutting capacity at 45 degrees right: flat 135x60 mm
Vice opening 180 mm
Saw blade dimensions 350x32x3.4 mm
Speed 1700/3400 rpm
Machine weight approx. 600 kg
Semi-automatic cross-cut saw for sawing aluminium and light metal alloys. Bevel cuts from 45° right to 45° left, and saw head swiveling 0°-45° to the left.

Control is via multiple microprocessors, while two NC-controlled axes allow programming of up to 1000 different cutting programs for the same material, each with different quantities and lengths.

Hjdpfx Akey Ruvbjgjfn
- New centralized control console on an articulated arm for easy operation of the machine from any working position, with the emergency stop always within reach.
- Fieldbus communication system with dual microprocessor and serial connection.
- Display with 20 characters x 4 lines showing the following technical parameters: number of programmed and executed cuts, saw band thickness, feed length, cutting time, ammeter, and display of over 100 diagnostic messages and warnings.
- New – Display and logging of alarm and error messages with the ability to view incidents that have occurred. New – 600 mm material feeder with cutting motor and ball screw mounted on opposing bearings.
- New – Low-voltage control panel: polyester membrane keypad with thermoformed and raised pushbuttons and actuation signal.
- Stroke movement of the saw bow is programmable directly from the control panel to adapt to the workpiece.
- Ball-bearing mounted rotary table for smooth and precise rotation.
- Clamping system with two frontally arranged vices, which can be freely positioned along the longitudinal axis of the workpieces.
- Adjustable mechanical stops for the quick positioning of the head at angle settings at 0 and 45 degrees right and left.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.