Beli Hydraulic double-column presses & four-column presses bekas (315)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Mesin pengolah logam & mesin perkakas Mesin press logam Hydraulic double-column presses & four-column presses
Iklan kecil
Austria
10.648 km
Mesin cetak empat kolom - Hidraulik
SICMIPSQ 150 A
Hubungi
Kondisi: baru, de-hu-001
Hodpjynm Icsfx Ag Roni
Iklan kecil
Austria
10.648 km
Mesin cetak empat kolom - Hidraulik
SICMIPSQ 100 A
Hubungi
Kondisi: baru, de-hu-001
Hodpfx Asynm H Ssg Rjni
Iklan kecil
Ennepetal
11.234 km
Produktionspresse
HidrobrasilViersäulenpresse
Hubungi
Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0329, gaya penekanan: 350 t, en-GB
Press force: 350 t
Clear width: 3000 mm
Stroke: 900 mm
Total power requirement: 75 kW
Machine weight approx.: 60 t
Dimensions (L x W x H): 2660 x 5400 x 5700 mm
Return force: 35 t
Table size: 3610 x 1600 mm
Ram size: 3610 x 1600 mm
Table height above floor approx.: 900 mm
Rapid approach speed: 230 mm/sec
Return speed: 170 mm/sec
Oil tank: 2000 l
Max. working height: 1700 mm
Pressing speed: 21 mm/sec
Rapid traverse speed: 200 mm/sec
Oil cooling (electric): 3 kW (max)
Control system SIEMENS: S7 1500
Hodpjfxygzefx Ag Roni
Monitor: WEG 12 inch

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Ennepetal
11.234 km
Produktionspresse
HidralmacViersäulenpresse
Hubungi
Kondisi: bekas, nomor mesin/kendaraan: 4396, gaya penekanan: 200 t, en-GB-1
Hsdsfxyh Aspfx Ag Rjni
Iklan kecil
Ennepetal
11.234 km
Tiefziehpresse
DUNKESViersäulenpresse
Hubungi
Kondisi: bekas, Tahun pembuatan: 2001, nomor mesin/kendaraan: H01-3129, gaya penekanan: 200 t, Pressure: 200 t
Clear width: 1300 x 1300 mm
Stroke: 1000 mm
Total power requirement: 37 / 5.5 kW
Machine weight approx.: 29,500 kg
Space requirement approx.: 2600 x 3000 x 5200 mm
Speeds: 450 mm / free fall
Speeds: 20 mm/sec
Hedjfhcc Nepfx Ag Rsni
Overrun distance: 130 / 60 ms
Oil pressure: 283 bar
Oil tank capacity: 2200 L
Temukan lebih banyak mesin bekas
Iklan kecil
Ennepetal
11.234 km
Produktionspresse
HidralmacViersäulenpresse
Hubungi
Kondisi: bekas, Tahun pembuatan: 2017, gaya penekanan: 500 t, Pressure: 500 t
Pass-through width: 1300 x 800 mm
Stroke: 600 mm
Approx. machine weight: 18 t
Space requirement approx.: 2400 x 2400 x 5500 mm
Return force: 50 t
Operation: Two-hand control
Cylinders: 1 piece
Motor: 50 kW
Oil cooling: electric
Column diameter: 200 mm
Working height (distance between ram & table plate): 700 mm
Table size: 1900 x 800 mm
Table height above floor approx.: 1000 mm
Ram plate: 1300 x 800 mm
Approach speed: 150 mm/sec
Working speed: 5–10 mm/sec
Return speed: 150 mm/sec
Oil tank: 1500 l
Oil quantity: 1400 l
Hnedpfjd E Irmjx Ag Rsi
Control system functionality:
The linear scale continuously communicates the position of the ram and ejector to the control unit. The travel path, upper stop point, and the switching point at which the press changes from rapid traverse to working speed—along with the target end position—can all be easily and quickly input via the monitor control.
The working speed can be set in 1 mm/sec increments from 2 to 15 mm, and in 10 mm increments from 15 up to 150 mm.
Additionally, the machine features pressure monitoring, which can either automatically return the ram to the upper position upon reaching the desired pressure, or maintain pressure at the set value (with ±5% tolerance) for a configurable time before opening.
The control system monitors all safety zones, the complete hydraulics, the pumps, and the temperature.
It also controls the synchronization of the main cylinders and compensates for uneven loads accordingly.
The control is housed in an attached electrical cabinet.
Operation of the press itself is performed via an adjustable two-hand control, reducing operator movements.
Further information:
Included in the offer are detailed 3D drawings, which must be checked and approved by the customer.
Columns and cylinders are made of tool steel, induction hardened and chrome plated on the outside.
Ram guides are manufactured using bronze sliding bushings.
Scope of delivery includes:
? Manuals and operating instructions for the motors, pumps, and the press itself, as well as the CE Declaration of Conformity (each in duplicate)
? Safety inspection by a qualified company
? The machine complies with the EU Machinery Directive 2006/42/EC for hydraulic presses and with DIN EN 693/2011
Iklan kecil
Ennepetal
11.234 km
Produktionspresse
HidrobrasilViersäulenpresse
Hubungi
Kondisi: baru, Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0116 - Rev.00, gaya penekanan: 110 t, Pressure: 110 t
Clear width: 1300 mm
Stroke: 1500 mm
Approx. machine weight (without operating fluids): 12 t
Dimensions L x W x H: approx. 2300 x 2090 x 4200 mm
Return force: 11 t
Hodpfsdxvflex Ag Rjni
Max. working height: 1500 mm
Ram plate: 1730 x 1100 mm
Table plate: 1730 x 1100 mm
Table height above floor approx.: 700 mm
Column diameter: 140 mm
Ram plate thickness: 100 mm
Clamping plate thickness: 100 mm
Noise level (max.): 67 dB
Machine body colour: RAL 7035
Moving parts colour: RAL 2009
Other components colour: RAL 7021
Cladding and platform colour: RAL 1021
Motor power: 18 kW
Max. rapid approach speed: 300 mm/sec
Pressing speed: 15 mm/sec
Oil tank: 150 l
Control system Siemens: S7 1200
Iklan kecil
Ennepetal
11.234 km
Produktionspresse
HidrobrasilViersäulenpresse
Hubungi
Kondisi: baru, nomor mesin/kendaraan: DF0279, gaya penekanan: 1.000 t, Pressure: 1000 t
Clear width: 1500 mm
Hnsdpfefxyiyex Ag Rsi
Stroke: 800 mm
Total power requirement: 91 kW
Machine weight approx.: 68 t
Dimensions (L x W x H): 3850 x 2900 x 6000 mm
Return force: 100 t
Table size: 1500 x 2250 mm
Ram size: 1500 x 2250 mm
Table height above floor approx.: 1300 mm
Advance speed: 200 mm/sec
Return speed: 200 mm/sec
Pressing speed: 10 mm/sec
Oil tank: 1200 l
Oil cooling (electric): 1.5 kW (max)
Max. working height: 1000 mm
Rapid traverse speed: 200 mm/sec
WEG monitor: 12 inch
Iklan kecil
Gelsenkirchen
11.241 km
Schiebetischpresse
HidrobrasilDoppelständerpresse
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, gaya penekanan: 400 t, Oil-hydraulic Double-Column Press 400 T with Sliding Table
Press Type: Double-Column Press
Thermally Neutral Range: 80 – 120 °C
Number of Operator Sides: 1 side
Forces:
- Pressing Force max.: 4,000 kN
- Free Tearing Force max.: 400 kN
- Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec.
Hsdpfjph Uk Nox Ag Rsni
Dimensions:
- Length: 3,800 mm
- Width: 4,475 mm
- Max. Opening: 800 mm
- Stroke: 800 mm
- Table Height above floor: 1,100 mm
- Total height above floor (overall height): approx. 4,300 mm
- Minimum hall height: 5,500 mm
- Parallelism deviation at 20°C: +/- 0.1 mm
Deflection:
- Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m
Weight:
- Total weight of the press (without operating fluids and table plate): approx. 28 t
Press Table:
- Table size: 1,500 x 1,500 mm
Speeds:
- Fast closing speed: 100 mm/s
- Pressing speed: 8 – 3 mm/s
Noise Level:
- Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A)
Hydraulics:
- Number of main cylinders/ram cylinders: 1 pc.
- Operating pressure: max. 300 bar
- Pressure build-up time (press): 4 sec.
- Pressure accuracy during ram stroke: +/- 3 bar
- Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min
- Oil volume: approx. HLP 46 MW, 1,000 liters
- Ambient temperature: max. 40 °C
- Oil temperature: max. 55 °C
- Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec.
Electrical System:
- Main supply: 400 V AC
- Control voltage: 24 V DC
- Frequency: 50 Hz
- Hydraulic main motor connection: 40 kW
Features:
- Sliding table press with 400 T capacity
- Closing speed up to 100 mm/s (adjustable via touchscreen)
- Opening speed up to 100 mm/s (adjustable via touchscreen)
- Pressing speed start at 10 mm/s (adjustable via touchscreen)
- Table plate size: 1,500 x 1,500 mm
- Ram size approx. 1,600 x 1,500 mm
- Oil temperature monitoring: 55°C warning, 60°C shutdown
- Automatic lubrication (adjustable via touchscreen)
- Free positioning of ram (adjustable via touchscreen)
- SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height
- Hydraulic and mechanical ram locking
- Circulation oil cooling (adjustable via touchscreen)
- Ejector in table, 20 T press force, 350 mm stroke
- Ejector travels outward with table
- Table plate precision milled, with DIN 22 T-slots
- Pressure setting from 60 T to 400 T (adjustable via touchscreen)
- Travel limit optionally by pressure or position
- Setup, single stroke, and automatic cycle operation (adjustable via touchscreen)
- Swivelling control panel on cabinet
- Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle
- Assembly, commissioning, and training available at extra charge
- Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit.
- The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors.
(Sliding Table Press, Hydraulic Press, Double-Column Press)
Iklan kecil
Gelsenkirchen
11.241 km
Deep-drawing press
HIDRALMACViersäulenpresse
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, gaya penekanan: 400 t, Clear passage width 2500 mm
Stroke 900 mm
Total power requirement 62 kW
Machine weight approx. 27.5 t
Dimensions (L x W x H) approx. 3950 x 2200 x 4850 mm
Retraction force 40 t
Main cylinders 2 units
Column diameter 220 mm
Installation height 1300 mm
Table size 2500 x 1600 mm
Ram size 3100 x 16000 mm
Table height above floor approx. 900 mm
Forward travel speed 200 mm/sec
Return speed 200 mm/sec
Working speed 5 - 15 mm/sec
Oil tank 1500 l
Oil volume 1200 l
Adjustable pressure control from 50 - 400 t
Drawing cushion 1400 x 800 mm
Drawing unit force 30 - 60 t
Drawing cushion stroke 250 mm
Drawing cushion speed 5 - 80 mm/sec
Robust machine frame with solid welded construction
Low maintenance and reliable
Piston rod with induction hardening and chrome plating
T-slots available as per customer specification or, if not specified, 22 mm as per DIN
CE certificate
Manufactured to EU standards
Operating manual, technical documentation, and paperwork in German
Construction steel LCG ASTM A36
T-slots in table and ram as per DIN 650-22
Travel distance control adjustable via monitor
Light sensors front and rear: Sick, 1300 mm
Hnodpfx Agjin Et No Rji
Hydraulic components by Bosch Rexroth
Monitor: Siemens 12 inch
Wall-mounted control cabinet
Press interior illuminated with LEDs
Hydraulic block monitored by safety PLC
Energy control system: reduces
pump stand-by consumption to approx. 2 kW
Remote access for remote servicing
Two-hand operation on movable stand
Further information:
Pressure build-up up to 400 t within max. 4 seconds after tool closure
Left side of press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Right side of press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Operation of the press can be manual, semi-automatic, or fully automatic
Iklan kecil
Gelsenkirchen
11.241 km
Produktionspresse
HidrobrasilDoppelständerpresse
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 20 t, Double-column press, 20 t capacity
a) Closing speed up to 10 mm/s
b) Opening speed up to 30 mm/s
c) Table size (between columns): 1400 x 1100 mm
d) Ram size (between columns): 1400 x 1100 mm
e) Manual lubrication (via grease nipples)
f) UKF Recirculating Cooling Filtration (electric cooling)
g) Pressure adjustment from 4 t to 20 t (adjustable via rotary control)
h) Stroke adjustment via sliding controller
Hnjdpfxehmbhqe Ag Rei
Design
Press design: Double-column, hydraulic
Thermal neutral zone: 80–120°C
Number of operating sides: 1 side
Forces
Pressing force (max.): 200 kN
Free tear-off force (max.): 20 kN
Pressure build-up time (closed tool, steel on steel): Max. 4 s
Dimensions
Max. opening width: 500 mm
Stroke: 300 mm
Table height above floor: approx. 900 mm
Overall height above floor: approx. 2800 mm
Required hall height: min. 3,500 mm
Parallelism deviation at 20°C: #ERROR! mm
Deflection (measured at max. closing force with 2/3 load):
Iklan kecil
Gelsenkirchen
11.241 km
Produktionspresse
HidrobrasilViersäulenpresse
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 400 t, Hydraulic 400-ton Four-Column Press
Suitable for continuous multi-shift operation, with the following main features:
a) Closing speed: 100 - 450 mm/sec
b) Opening speed: 50 - 250 mm/sec (adjustable via touchscreen)
c) Pressing speed: 5 - 60 mm/sec (adjustable via touchscreen)
d) Piston accumulator with approx. 4 nitrogen cylinders
e) Table size (clamping surface): 2700 x 1700 mm (viewed from the front, between the columns)
f) Total table size: 3400 x 1700 mm
g) 28 mm T-slots as per customer requirements
h) Table, ram, and press head stress-relieved annealed
i) Column diameter: 250 mm
j) Ram size: 3400 x 1700 mm (clamping surface 2700 x 1700 mm)
k) Machine overall size approx. 3900 x 2200 (footprint) x 5700 mm (height)
l) Oil temperature monitoring (adjustable via touchscreen)
m) Automatic lubrication (adjustable via touchscreen)
n) Free positioning of the ram (adjustable via touchscreen)
o) KEYENCE safety light curtains 14 mm front and rear
p) Circulation oil cooling (adjustable via touchscreen)
q) Pressure holding valve 0 to 600 sec. (adjustable via touchscreen)
r) Table plate size 3400 x 1700 mm, precision milled
s) Side doors with monitoring, 1200 mm high, 1000 mm wide
t) RITTAL control cabinet, 2200 mm wide, can be positioned up to 20 m from the press
u) Pressure settings from 50 tons to 400 tons (adjustable via touchscreen)
v) Stroke limit selectable via pressure or position
w) Modes: program operation, setup mode, single stroke + continuous stroke (selectable via rotary switch)
x) Swivelling operator panel with 15-inch touchscreen monitor
y) Two-hand operation on both sides
z) Prepared for automatic material feed (SIEMENS S7 1500)
aa) Machine body primed and painted
bb) Assembly, commissioning and instruction available at extra charge
Hydraulics: All press hydraulics are assembled exclusively with BOSCH-REXROTH / Parker / HAWE components. The control cabinet contains only components (SIEMENS) that are readily available in Germany. All safety devices apart from the light curtains are SICK brand. The controller supplied is SIEMENS (S7 1500), including the 15-inch touchscreen panel. The SIEMENS remote maintenance unit SECOME - Ethernet is included in the scope of delivery.
SPECIAL FEATURE: Our double-ram design in combination with a piston accumulator allows full performance to be delivered using a single 90 kW main motor.
Further technical details (section 1.3):
Technical Data
Design
Press type: Four-column press
Thermally neutral: 80 – 120 °C
Number of operator sides: 2
Forces
Pressing force max.: 4,000 kN
Free opening force max.: 600 kN
Pressure build-up time, tool closed (steel on steel): max. 2 sec.
Dimensions
Planned minimum tool height: 600 mm
Max. opening: 1,600 mm
Stroke and min. opening: 1,000/600 mm
Table height above floor: 820 mm
Overall height (build height): approx. 5,700 mm
Minimum hall height: 7,000 mm
Parallelism deviation
Hnjdpeg Iihwsfx Ag Rei
at 20°C: +/- 0.1 mm
Deflection
Measured at max. closing force, 70% table occupancy: ≤ 0.17 mm/m
Weight
Total weight of the press without operating fluids: approx. 52 t
Speeds (see attached cycle diagram)
Rapid closing: 100 – 450 mm/s
Pressing speed at max. force ...
Iklan kecil
Gelsenkirchen
11.241 km
Schiebetischpresse
HidrobrasilViersäulenpresse
Hubungi
Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0362, gaya penekanan: 250 t, Pressure: 250 t
Clearance width: 1800 mm
Stroke: 600 mm
Total power requirement: 22 kW
Approx. machine weight: 24 t
Dimensions L x W x H: approx. 3390 x 3400 x 3800 mm
Column diameter: 160 mm
Retraction force: 25 t
Max. working height: 800 mm
Table size: 1800 x 1600 mm
Ram size: 2350 x 1600 mm
Table height above floor: approx. 900 mm
Hydraulic table traverse: 25 mm/sec
Max. table load: 5 t
Hnjdpsfxyinjfx Ag Rsi
Approach speed: 10 mm/sec
Pressing phase speed: 10 mm/sec
Return speed: 25 mm/sec
Rapid traverse speed: 10 mm/sec
Oil tank: 600 l
Oil cooling (electric): 1.5 kW (max.)
Recommended oil: type 46 / 10 µm
Monitor SIEMENS: 10 inch
Vibration damping pads:
The machine is mounted on 4 specially fabricated damping pads, each measuring 450 x 450 x 85 mm.
Oil tank with oil cooler:
The tank has a capacity of 1500 L. The oil is cooled by a dedicated pump, which activates at 30°C.
Oil filtration system:
Independent of the main and cooling pump, the press is equipped with a dedicated filtration circuit. The pump operates continuously, but only requires 1.5 kW.
Energy-saving function:
If the main pump is not required for a preset period, it switches to energy-saving mode, requiring only approx. 2 kWh. Full power is restored immediately when pressure is needed again.
Safety technology:
Optionally available with SICK or Pilz safety PLCs. The safety light curtains are supplied by the same manufacturer or by the German company SCHMERSAL.
Control cabinet:
40% of the control cabinet space remains available for future installations. All components inside the cabinet are supplied by SIEMENS.
Bolts:
All bolts used on the machine are zinc-plated or yellow galvanized.
Oil tray:
The hydraulic block and pump are positioned in a small oil catch tray to collect oil during maintenance or hose replacement.
Noise emission:
The press produces a maximum of 67 decibels according to standards.
Accessories:
Roller loading bridges:
Two loading bridges with rollers, each 1500 mm long, removable, supports with heavy-duty steel rollers.
Parallelism monitoring:
Both cylinders are monitored via Balluff position measurement systems and SICK draw-wire encoders. Parallelism monitoring is activated at the start of the pressing process. The monitoring accuracy can be set in the control unit. This function is deactivated during idle run. The position on both the left and right exterior of the ram is measured by two SICK draw-wire encoders. The control opens or closes the cylinder oil flow via special high-speed valves. The achievable parallelism accuracy across the full width is less than 1 mm.
Iklan kecil
Gelsenkirchen
11.241 km
Contoh pers
HidralmacViersäulenpresse
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2016, gaya penekanan: 160 t, Pressure: 160 t
Stroke: 600 mm
Total power requirement: 7.5 kW
Machine weight approx.: 7 t
Return force: 16 t
Main cylinder: 1 unit
Column diameter: 160 mm
Installation height: 800 mm
Table area: 1200 x 800 mm
Column distance (lateral): 400 mm
Table height: 850 mm
Hnedpfx Agsfxyi Ij Rji
Max. table load: 5 t
Forward speed: 1 to 9.8 mm/sec
Return speed: 1 to 9.8 mm/sec
Oil quantity AW 46: 220 l
Iklan kecil
Gelsenkirchen
11.241 km
Tiefziehpresse
HidralmacDoppelständerpresse
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, nomor mesin/kendaraan: DF0052, gaya penekanan: 200 t, en-GB: Pressure: 200 t
Column spacing: 1200x1000 mm
Hnedefxyirepfx Ag Roi
Stroke: 600 mm
Total power requirement: 32.5 kW
Machine weight approx.: 20.5 t
Space requirement approx.: 4000x2600x5000 mm
Return force: 20 t
Main cylinder(s): 1 unit
Voltage: 400 V
Frequency: 50 Hz
Control voltage: 24 V
Axial piston pump: BOSCH/REXROTH
Installation height (distance between worktable and ram plate with retracted cylinder): 800 mm
Table and ram plate: 1200x1000 mm with T-slots as per customer requirement, DIN 650-22 mm
Working height: 1100 mm
Approach speed: 170 mm/sec
Return speed: 150 mm/sec
Pressure phase speed: 15 mm/sec
Hydraulic block: REXROTH
Oil requirement: 500 l
Pressure control: via PLC (minimum pressure 20 t)
Oil cooling: electric
Socket: 220 V (in control cabinet)
Storage capacity: 200 programs
Pressure adjustment: via monitor from 20–200 t
Operation: mobile two-hand operation
Setting mode speed: 2–10 mm/sec
Pressure holding time: 0–10 sec
Iklan kecil
Gelsenkirchen
11.241 km
Mesin press gambar
HidralmacViersäulenpresse
Hubungi
Kondisi: baru, Tahun pembuatan: 2017, nomor mesin/kendaraan: DF0152, gaya penekanan: 80 t, Pressure: 80 t
Stroke: 500 mm
Total power requirement: 12 kW
Approx. machine weight: 5.1 t
Operation: Two-hand control
Cylinders: 1
Working height: 800 mm
Working area: 800 x 800 mm
Table size: 800 x 800 mm
Ram plate: 2800 x 1300 mm
Table height: 800 mm
Approach speed: 9.8 mm/sec
Working speed: 9.8 mm/min
Return speed: 18 mm/sec
Travel distance: 700 mm
Column diameter: 75 mm
Deep drawing function motor: 10 kW
Main motor: WEG 15 kW
Pump: REXROTH, Parker electronic axial piston pump kW
Deep drawing cushion force: 25 t (at 280 bar)
Deep drawing cushion stroke: 200 mm
Deep drawing cushion rod diameter: 30 mm
Deep drawing cushion travel speed: 80 mm/sec
Hydraulic block: REXROTH/Parker
Hnedofxyh Hjpfx Ag Rji
Hydraulic valves: REXROTH/Parker
Hydraulic tank: 300 L
Hydraulic tank oil requirement: approx. 250 L
Hydraulic pressure regulation: via PLC (minimum pressure 10 t)
Hydraulic air cooling: for oil cooling, with electric fan
Hydraulic lubrication for guides: manual, via lubrication nipples or cartridges
Electronic components: SIEMENS / MOELLER
Control panel: on swivel arm
Control: automatic via two-hand operation with key switch, manual via operator panel in setup mode
Operation: movable two-hand control
USB interface: for data transfer
Remote monitoring: Siemens for remote maintenance
Spacer sensors: for stroke length adjustment
Pressure hold: 0–10 sec.
Oil tank: 150 L
Schmersal light curtains: 800 mm long, front and rear, 300 mm diagonally at the bottom
Iklan kecil
Gelsenkirchen
11.241 km
Tiefziehpresse
Viersäulenpresse
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, gaya penekanan: 400 t, Pressure: 400 t
Stroke: 900 mm
Table size: 1200 x 1200 mm
Drawing cushion: 150 t
Hnodpsfh Izmsfx Ag Roi
Drawing cushion stroke: 280 mm
Shut height: 1100 mm
Iklan kecil
Gelsenkirchen
11.241 km
Alat press pelurus
HidralmacPortal-Richtpresse
Hubungi
Kondisi: baru, gaya penekanan: 400 t, Pressure: 400 t
Column clearance: 3400 mm
Stroke: 500 mm
Total power requirement: 55 kW
Machine weight approx.: 49 t
Retraction force: 26 t
Max. pump capacity: 131 l/min
Dimensions (L x W x H): 7,900 x 5,500 x 4,300 mm
Hedpjfhcc Refx Ag Reni
Bridge travel path: 5000 mm
Lateral travel range of cylinder: 2800 mm
Table height above floor approx.: 700 mm
Max. distance table to ram: 1000 mm
Oil tank: 700 l
Bridge travel speed: 0–33 mm/sec
Cylinder lowering speed: 0–10 mm/sec
Cylinder stroke speed: 0–25 mm/sec
- Reinforcement of the table in the front area to 1,500 mm (additional weight approx. 4,000 kg)
- Protective covers for the two motors that move the bridge
- Signal lamps left and right equipped with protective casings
- Galvanized grating inside the tray, flush with the upper edge
Iklan kecil
Gelsenkirchen
11.241 km
Pers empat kolom
CaronnoViersäulenpresse
Hubungi
Kondisi: bekas, Tahun pembuatan: 1991, gaya penekanan: 650 t, Pressure: 650 t
Hedpfxofhmuvs Ag Rjni
Passage width: 920 mm
Stroke: 1750 mm
Machine weight approx.: 47 t
Table size: 2000 x 1500 mm
Ram area: 2000 x 1500 mm
Installation height: 2100 mm
Hydraulics: 203 bar
Closing speed: 500 mm/min
Pressing speed: 0.5 – 10.4 mm/sec
Opening speed: 250 mm/sec
Release speed: 0.5 – 66.4 mm/sec
Return force: 150 t
Total power requirement: 75 kW
Space requirement approx.: 4.4 x 2.5 x 7.5 m
Iklan kecil
Gelsenkirchen
11.241 km
Produktionspresse
HidrobrasilViersäulenpresse
Hubungi
Kondisi: bekas, Tahun pembuatan: 2019, gaya penekanan: 250 t, Pressure: 250 t
Passage width: 2500 mm
Stroke: 500 mm
Total power requirement: 60 kW
Approx. machine weight: 39 t
Dimensions (L x W x H): 2720 x 3750 x 4350 mm
Retracting force: 25 t
Max. working height: 800 mm
Table size: 3090 x 1500 mm
Ram size: 3090 x 1500 mm
Table height above floor approx.: 1000 mm
Approach speed: 400 mm/sec
Pressing speed (at 125 t): 50 mm/sec
Return speed: 400 mm/sec
Rapid traverse speed: 400 mm/sec
Oil tank: 1500 l
Oil cooling (electric): 3 kW (max)
Vibration damping plates: each 450x450x85 mm
Pressure: 250 t at 220 bar t/bar
Max. pump capacity: 176 l/min
Recommended oil: 46 / 10 μm
Hydraulics by Bosch Rexroth or other German manufacturers: Parker, Hydac
Control SIEMENS: included
Safety light curtains from Schmersal/Pilz: Pilz
Monitor: Omron 12 inch
Vibration damping plates:
The machine rests on four specially manufactured vibration damping plates, each measuring 450x450x85 mm.
Oil tank with oil cooling:
The tank has a capacity of 1500 L. The oil is cooled by a dedicated pump, which activates at 40°C.
Oil filtering system:
Independent of the main and cooling pump, the press features a separate filtration circuit. The pump operates continuously, requiring only 1.5 kW.
Energy-saving function:
If the main pump is not required for a preset period, it enters energy-saving mode, consuming only about 2 kW/h, yet it is immediately fully operational when pressure is needed again.
Hnsdpfod Nq Idox Ag Roi
Safety technology:
The safety technology is provided by Pilz, with the light curtains from the same manufacturer.
Control cabinet:
40% of the control cabinet space is intentionally left free for future installations. All components installed are from Schneider.
Bolts:
All bolts used on the machine are zinc-plated or yellow-passivated.
Oil pan:
The hydraulic block and pump are housed in a small oil drip tray, allowing oil to be collected during repairs or hose replacements.
Noise emission:
According to standards, the press produces a maximum of 75 decibels.
Accessories:
Roller loading bridges:
Two removable loading bridges with rollers, each 1500 mm long, with supports fitted with large, robust heavy-duty rollers.
Parallelism monitoring:
Both cylinders are monitored for parallelism via Balluff displacement measuring systems and Sick wire-actuated encoders. The parallelism monitoring is activated at the start of the pressing process, and accuracy can be set in the control panel. The function is deactivated during empty runs. The position of the ram is measured on the left and right by two SICK cable-drum encoders. The control system then opens or closes the oil flow to the cylinders via special high-speed valves. The target parallelism accuracy is less than 1 mm across the entire width.
Iklan kecil
Gelsenkirchen
11.241 km
Mesin press produksi kecil
HidrobrasilDoppelständerpresse
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, lebar meja: 1.000 mm, panjang meja: 600 mm, 40T H-frame press with slide table, calibration press
• Press capacity: 6-40 t (adjustable)
• Maximum installation height: 700 mm
• Usable area – lower table: 1000 x 600 mm
• Usable area – ram/slide: 1000 x 600 mm
• Frame type: H-frame
• Guide pillar diameter: Ø 100 mm (4 pieces, in each corner)
• Table height from floor: 800 mm
• Overall dimensions approx. (W x D x H): 2,100 x 1,600 x 3,500 mm
• Total weight approx.: 3,500 kg
• T-slots and drillings are manufactured according to customer requirements.
HYDRAULIC CYLINDER:
• Piston stroke: 0–500 mm (adjustable)
• Cylinder diameter: Ø 140 mm (1 pc.)
• Piston rod diameter: Ø 80 mm (1 pc.)
• Working pressure (max.): 260 bar
• Return speed: 90 mm/sec
• Ram speed: 9 mm/sec
• Rapid traverse speed: 80 mm/sec
HYDRAULIC UNIT:
• Hydraulic pump (brand: ASC): 67+8 l/min (1 pc.)
• Motor power: 4 kW (1 pc.)
• Pressure accuracy during pressing stroke: +/- 5 bar
• Hydraulic power unit mounted at the upper rear of the press
• Hydraulic manifold and valves: DUplomatic brand
• Manometer for pressure indication
• Air and oil filter brand: FILTREC
• Electronic oil level switch
• Air-cooling (radiator) for hydraulic cooling
• Pressure adjustable via pressure switch
• Control via sensor
• Safety cover (door) fitted at the back of the press
• Safety light curtains and internal lighting included
ELECTRICAL CONNECTION:
• Main supply: 400V AC
• Control voltage: 24V DC
• Frequency: 50 Hz
• Hydraulic main motor connection: 4 kW
• Total connected load: approx. 6 kW
CONTROL CABINET EQUIPMENT:
• Protection class: IP 54
Hsdsxrby Hjpfx Ag Roni
• Reserve space: 30%
• Cooling: Yes (air-cooled)
• Internal lighting: Yes
• Operating mode switch: Yes (lockable)
• Electrical components by SIEMENS, ALLEN BRADLEY, SICK.
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Gelsenkirchen
11.241 km
Umformpresse
HidralmacViersäulenpresse
Hubungi
Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 4303, gaya penekanan: 500 t, Pressure: 500 t
Passage width: 2100 x 1500 mm
Stroke: 1000 mm
Total power requirement: 62 kW
Approx. machine weight: 39 t
Dimensions (L x W x H): 5100 x 2800 x 4040 mm
Retraction force: 40 t
Main cylinders: 2 units
Column diameter (main cylinders): 360 mm
Table size: 2100 x 1500 mm with T-slot
Ram size: 2100 x 1500 mm
Table height above floor approx.: 850 mm
Approach speed: 300 mm/sec
Return speed: 300 mm/sec (with 20T ram weight)
Pressing speed: 200T = 28 mm/sec
Oil tank: approx. 1000 l
Auxiliary cylinders: 2 units
Column diameter (auxiliary cylinders): 120 mm
Total table plate size: approx. 2750 x 1600 mm
Total ram plate size: approx. 2750 x 1600 mm
Pressing speed: 300T = 20 mm/sec
Pressing speed: 500T = 6 mm/sec
Ram retraction force: 40 t
Control circuit voltage: 24 V
Voltage: 400 V
Frequency: 50 Hz
Axial piston pump (REXROTH/Bosch A4VSO125): 290 l/min
Hedpfx Ajdyynvog Roni
Installation height (distance worktable – ram plate): 1500 mm
Hydraulic manifold: REXROTH
Pressure control: via PLC (minimum pressure 50T)
Cylinders: 4 x ?90 x 70 mm
Stroke length: 300 mm, adjustable via PLC
Ejector, approach speed: 95 mm/sec
Ejector, return speed: 240 mm/sec
Capacity: 4 x 15T at 250 bar
Pressure setting: via monitor from 50-500T
Pressure holding time: 0-900 sec
Hydraulic tank: 2000 l
Control system: Siemens S7 300
Storage capacity: 200 programs
Electronics by German manufacturers: SIEMENS/MÖLLER
Control panel: on swivel arm
Sick light sensors: 1500 mm at front side
Control function:
The linear scale provides the control system with the position of the ram and the ejectors at all times. The travel path, the upper stop, and the switching point (where the press switches from rapid traverse to working speed) as well as the target end position can be easily and quickly entered via the monitor controls.
Working speed can be set in increments of 1 mm/sec from 0 to 10 mm/sec and in increments of 10 mm from 10 to 300 mm/sec.
Additionally, the machine is equipped with pressure monitoring, which can either retract the ram as soon as the desired pressure is reached or maintain the pressure for the pre-set time (with 5% tolerance) and then open.
The control system monitors the protected areas, all hydraulics, the pumps, and the temperature.
It also monitors the parallelism of the main cylinders and compensates for unilateral overload.
The control system is housed in a separate control cabinet.
Operation of the press is via a control panel mounted on a swivel arm, reducing operator movement.
Additional equipment:
Polycarbonate glass 8 mm, inside at rear door
Polycarbonate glass 8 mm, at side doors and within the working area
Liquid run-off channel, 25 mm radius, at front, rear, and sides of the table
Special features of the press:
Including 10% reserve (max. capacity 550 t)
Steel quality: Stainless steel LCG ASTM A36, manufactured according to DIN 8651
Motor and pump switch off as soon as the tool is closed and automatically recalibrate at 5% pressure drop (significant cost savings)
Nitrogen compression system:
Supplied with a nitrogen compression unit that can generate a sudden pressure of 280 bar and can be switched on and off as needed.
Iklan kecil
Gelsenkirchen
11.241 km
Pulverpresse
HidrobrasilViersäulenpresse
Hubungi
Kondisi: baru, gaya penekanan: 100 t, 1
Hnsdpsfxyhqsfx Ag Rei
Iklan kecil
Gelsenkirchen
11.241 km
Mesin press produksi kecil
HidrobrasilDoppelständerpresse
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 160 t, Hydraulic 160 ton twin-cylinder insertion press
Hedpfsgz H Dhex Ag Roni
Double-column press – twin-cylinder press with 160 t capacity at 250 bar.
a) Downward idle speed: 9.8 mm/sec
b) Upward stroke up to 15.0 mm/sec
c) Table size: 1500 x 600 x 100 mm, height-adjustable
d) Ram plate: 1500 x 600 x 100 mm
e) Year of manufacture: 12/2020
f) Motor output: 11 kW
g) Pump capacity: 22 L/min
h) Stroke limitation via cam switch
i) Open height: 700 mm
j) Ram stroke: 500 mm
k) Remote operation via two-hand control
l) Pressure adjustment via rotary control from approx. 30 to 160 t
m) Approx. height: 2,800 mm
n) T-slots to customer specification
o) Weight: approx. 4,200 kg
p) Oil tank volume: approx. 200 L
q) Painted in RAL 5005 (signal blue) or according to customer request.
r) For safety reasons, the ram plate is painted orange RAL 2009 or signal yellow RAL 1023.
s) Installation, commissioning, and operator training available at additional cost.
The stroke can be adjusted via the cam switch.
The ram/table size of the machine shown is 1600 x 600 x 100 mm.
Iklan kecil
Deinze
11.500 km
Mesin press rangka H
Arlo200 ton / 1570 Vario
Hubungi
Kondisi: siap digunakan (bekas), tinggi total: 2.200 mm, lebar total: 1.000 mm, panjang total: 2.500 mm, lebar lorong: 1.570 mm, daya: 11 kW (14,96 hp), berat kosong: 2.100 kg, kapasitas angkut: 200.000 kg, silinder yang dapat dipindahkan
Penyesuaian ram maksimum: 300 mm
Kecepatan penarikan: 9 mm/detik
Kecepatan kerja: 5 mm/detik
Kecepatan pengembalian: 10 mm/detik
Hnsdpfx Ajygyxlog Rei
Jarak maksimum antara meja - ram: 760 mm
Dimensi meja: 1570 x 490 mm
Kami memudahkan pencarian untuk Anda
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Hydraulic double-column presses & four-column presses (315)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan









































































































