Beli Hydraulic double-column presses & four-column presses bekas (313)

Kondisi: bekas, Tahun pembuatan: 1972, nomor mesin/kendaraan: 703, tinggi total: 3.200 mm, tinggi meja: 1.160 mm, lebar total: 1.600 mm, panjang total: 2.000 mm, gaya penekanan: 200 t, lebar meja: 1.200 mm, panjang meja: 730 mm, berat keseluruhan: 11.280 kg, tabel jarak ke piston: 870 mm, jenis arus masuk: tiga fasa, tinggi kerja: 1.160 mm, jarak antara tiang: 1.280 mm, panjang langkah: 620 mm, jangkauan kerja: 1.280 mm, lubang tembus di meja: 30 mm, kapasitas tangki oli: 300 l, tegangan masuk: 380 V, tinggi kabinet kontrol: 670 mm, panjang kabinet kontrol: 300 mm, Perlengkapan: dokumentasi / manual, Hydraulic press GIGANT (Costruzioni Oleodinamiche) 200 tons, fully operational and available for sale. Machine equipped with perforated/slotted table surface for clamping and setups, complete with electrical panel and hydraulic system. Documentation available (manual/schematics). Main data: - Pressing force: 200 t - Dimensions (W×D×H): 1600 × 2000 × 3200 mm - Weight: 11,280 kg - Table height from floor: 1160 mm - Max. daylight opening: 870 mm - Min. daylight opening: 250 mm - Ram stroke: 620 mm (870–250) - Usable space between columns (X): 1280 mm - Usable front/rear distance (Y): 600 mm - Usable working area: 1280 × 600 mm Table / fixturing: Hnsdoyl Nrrspfx Ag Rsi - Through holes: Ø 30 mm - Slots: 2 × (730 × 20 mm) + 2 × (1200 × 20 mm) Electrical / hydraulic system (nameplate): - Power supply: 380 V – 50 Hz (three-phase) - Motors: 15 + 15 HP - Oil tank: 300 L (From schematics/manual) GTP 200/2-E configuration with dedicated circuit and available electrical/hydraulic diagrams. Electrical cabinet (external dimensions): - 670 × 500 × 300 mm (H×W×D) Condition: used Documentation: yes (manual/schematics available) Transport: at buyer’s expense, loading handled by the seller.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1146, tinggi total: 2.752 mm, lebar total: 3.000 mm, panjang total: 1.152 mm, gaya penekanan: 250 t, lebar meja: 2.400 mm, panjang meja: 800 mm, berat keseluruhan: 9.820 kg, jarak antara penyangga: 2.050 mm, panjang langkah: 700 mm, Press hidrolik GALFER DST/E 250 double colonne/dua tiang, kapasitas 250 ton, ideal untuk pengerjaan penekanan dan pembentukan logam (drawing, bending, punching, pelurusan, dan operasi penekanan industri pada umumnya). Mesin kokoh dan andal, dilengkapi meja 2400 x 800 mm dan stroke 700 mm, serta jarak antar kolom 2050 mm untuk menangani cetakan dan perlengkapan berukuran besar. Motor berkekuatan 15 kW. Press sedang menjalani proses retrofit (pembaruan/rekualifikasi), dengan kemungkinan pengiriman siap pakai sesuai konfigurasi yang disepakati. Foto terakhir merupakan rendering kemungkinan revamping total mesin. Tersedia berdasarkan permintaan: foto/video tambahan, detail status retrofit, dokumentasi teknis dan opsi inspeksi. Hnodpfx Agsylz Dms Rji

Kondisi: bekas, Tahun pembuatan: 1954, Fungsionalitas: berfungsi sepenuhnya, Used industrial press machine SÜDDEUTSCHE MASCHINENBAU Gesellschaft m.b.H. – Press Type HZ PR150-1000/850 – Year of manufacture: 1954 – Manufacturer: Süddeutsche Maschinenbau Gesellschaft m.b.H., Wiesental/Kreis Bruchsal (traditional German engineering company) – Press force: approx. 150 t (maximum force, equals 1,470 kN) – Working area: approx. 1000 mm × 850 mm (usable height/width, as per type code) – Heavy-duty H-frame construction – robust, designed for industrial applications – Mechanically/hydraulically driven forming press for metal and sheet metal processing – Large clamping and working surface, suitable for pressing, punching, forming, assembly and joining operations – Sturdy, solid build; ideal for workshops, series production or repair facilities Condition: Used / operational / technically inspected (please specify condition further: functional, overhauled, requires maintenance, etc.) Optional equipment: (tool holders, clamping devices, controls, safety guards – please add if available) Areas of application: Hnsdpfsyk Sn Hex Ag Rji ✔ Metal forming ✔ Assembly of interference or press-fit parts ✔ Drawing, bending, upsetting and riveting processes ✔ Workshop and maintenance operations

Kondisi: baik (bekas), Tahun pembuatan: 1982, Pressing force: max. 200 kN Safety distance: 100 mm Secondary stroke: max. 10 mm Motor power: 3 kW incl. accessories Hnjdpfx Aeydlutjg Roi

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 6.000 mm, lebar total: 3.500 mm, panjang total: 4.500 mm, gaya penekanan: 1.000 t, lebar meja: 2.300 mm, panjang meja: 3.000 mm, kecepatan operasi: 10 mm/dtk, berat keseluruhan: 78.000 kg, kecepatan mundur: 150 mm/dtk, tinggi kerja: 1.300 mm, panjang langkah: 800 mm, jangkauan kerja: 1.300 mm, kecepatan penekanan: 10 mm/dtk, Press hidrolik 1000t – dalam kondisi sangat baik, digunakan untuk stamping komponen seri pertama dengan alat progresif. Hnodjyilh Ispfx Ag Rji

Kondisi: baik (bekas), Tahun pembuatan: 1989, Pressing force: 1,000 kN Table size: 800 x 750 mm Distance between uprights: 900 mm Ram: 800 x 600 mm Installation height: max. 800 mm Stroke: 480 mm Speeds: Rapid down: 300 mm/s Pressing: 30 mm/s Rapid return: 300 mm/s Total power: approx. 31 kW Weight: approx. 13,000 kg Hodpsd E U Nnofx Ag Reni Footprint dimensions: approx. 1.6 x 2.90 x 3.8 m (D x W x H) • Hydraulic draw cushion, active, 400 kN, stroke 200 mm • Approved for manual loading operations • Equipped with oil-air cooler • Ram guided by 4 hard-chromed guide columns

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Pressure: 300 tons Distance between uprights: 1800 mm Side passages: Yes Installation height: 1000 mm Table: 1800 x 1000 mm Ram: 1800 x 1000 mm Stroke: 600 mm Weight: 43 tons Height: 4700 mm Siemens S7 control system Floor-level installation Hnsdpfjgbvkvex Ag Rji Sick light curtain Blank holder cushion: Stroke 200 mm

Kondisi: baik (bekas), gaya penekanan: 1.250 t, Press force: max. 1,250 t Hedpfx Agsyiumcj Reni Clear width: 585 mm Installation height: max. 480 mm Stroke: max. 355 mm Weight: 7,200 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1979, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 2374, tinggi total: 2.800 mm, tinggi meja: 900 mm, tinggi pemasangan: 430 mm, lebar total: 1.600 mm, panjang total: 1.200 mm, gaya penekanan: 100 t, lebar meja: 580 mm, panjang meja: 450 mm, kecepatan operasi: 180 mm/dtk, berat keseluruhan: 4.200 kg, kecepatan mundur: 180 mm/dtk, lebar pelat tuas: 580 mm, panjang pelat penekan: 450 mm, tabel jarak ke piston: 430 mm, jenis arus masuk: tiga fasa, panjang langkah: 150 mm, kapasitas tangki oli: 380 l, tegangan masuk: 400 V, kecepatan penekanan: 25 mm/dtk, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Press sedang dalam proses overhaul total. Segel silinder telah diganti dan pompa hidrolik sudah diperiksa fungsinya. Dilengkapi dengan blok keamanan hidrolik yang memenuhi standar keselamatan terkini. Sistem kelistrikan dan kontrol PLC sepenuhnya baru, termasuk tirai cahaya keselamatan di bagian depan, menjadikan mesin press ini hampir seperti baru. Hnodpexyxx Ajfx Ag Rsi

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi pemasangan: 500 mm, gaya penekanan: 160 t, lebar meja: 1.250 mm, panjang meja: 800 mm, panjang langkah: 300 mm, EXNER double-column press EX SL 160 Hnedjuw S A Dopfx Ag Roi NEW Machine currently in production Pressing force: 1600 kN Installation height: 500 mm Stroke: 300 mm Table width: 1250 mm Table depth: 800 mm Mechanical depth stop

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tinggi total: 3.300 mm, tinggi meja: 850 mm, tinggi pemasangan: 1.000 mm, lebar total: 850 mm, panjang total: 950 mm, gaya penekanan: 50 t, berat keseluruhan: 4.500 kg, Silinder telah direkondisi sepenuhnya. Hnodpoyh Rfpefx Ag Rji

Kondisi: bekas, Double-column press - Hydraulic Manufacturer: REPKON Model: 2000/800 kN Condition: Used Description Hnsdpfjudb Hcjx Ag Rji Pressing force: 200 t Distance between uprights: 1,600 mm Maximum ram stroke: 600 mm Shut height: 900 mm Table width: 1,600 mm Table depth: 1,300 mm Table height: 1,060 mm Ram surface area: 1,600 x 1,300 mm T-slots DIN 650 / 22H12 Rapid traverse speed: 400 mm/s Return speed: 325 mm/s Pressing speed: 42 mm/s at 40% Pressing speed: 20 mm/s at 100% Cushion force: 800 kN Cushion stroke: 150 mm Cushion speed up: 68 / down: 225 mm/s Refurbishment year: 2001

Kondisi: baru, Max. stroke: 400 mm\nTable height: Floor to top of table 850 mm\nInstallation height: 600 mm\nSpeeds: Advance 120 mm/s, Press 13–4 mm/s, Return 170 mm/s\nPump capacity: 65 l/min (REXROTH – axial piston pump)\nMotor: 15 kW – 1500 rpm\nDimensions (LxWxH): 2,100 x 2,400 x 4,300 mm\nWeight approx.: 11,000 kg\nCapacity: 1,500 kN (150 tons at 245 BAR)\n\nOperating mode: Selection via key switch\n\n- Manual / setup mode via two-hand operation without light barrier on front (backside always active)\n- Automatic mode with two-hand operation at full speed (with active light curtain)\n\nMain cylinder: Ø 270 mm\nAuxiliary cylinders: 2 x Ø 70 x 50 mm\n\nMotor: 15 kW – 1500 rpm (IE-3)\nPump: 45 cc – 65 l/min REXROTH axial piston pump\nSpeed: Advance 120 mm/s – Press: 13–4 mm/s – Return: 170 mm/s\n\nClear width: 1,300 mm\nTable plate: 1,200 x 800 x 90 mm with T-slots\nRam plate: 1,200 x 800 x 600 mm with T-slots & ribbed reinforcement\n\nInstallation height: 600 mm (max. distance between table & ram plate)\nStroke: max. 400 mm\nTable height: 850 mm (floor to top of table)\n-----\n\nHydraulics: (hydraulic accessories on top of the press)\n\nControl block & valves (REXROTH proportional valves)\nPre-fill valve (NG.125)\n8-way guide\nHydraulic ram safety device\nMechanical ram safety for TDC\nPressure adjustment via PLC\nSpeed adjustment via PLC\nPressure-hold valve for 600 sec\nAir cooler\nAutomatic lubrication for guides\nAuxiliary motor\nAuxiliary pump\n\nControl: \n\nMain switch cabinet (mounted on the side of the press frame)\nSwiveling control panel\nSIEMENS S7 - 1200\nKTP 9” SIEMENS touchscreen (languages: DE, ENG)\nSafety PLC (SICK)\nLight curtain for front & rear work area (SICK 750 + 150 mm)\nSoft starter\nMobile two-hand control unit\nSECOMEA Ethernet connection\nLinear scale for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT)\n\nWork area lighting (2x, IP66)\n\n- 8 free I/O channels on the PLC for external connections\n-----\n- Safety railing around hydraulics\n- Side climbing ladder\n-----\nDocumentation: Operating manual in German (1x paper & 1x USB)\nHydraulic & electrical diagrams\nParts lists\nCE certificate\n\nStandard: EN 16092/1/3\n-----\n\nOverall dimensions: approx. 2,400 x 2,100 x 4,100 mm\nTotal weight: approx. 11,000 kg\n\nPaintwork: Frame RAL 7035 light grey Hnodempfwdspfx Ag Rsi

Kondisi: bekas, Tahun pembuatan: 1990, 20003 Hnsdpfevut T Ijx Ag Rei

Kondisi: bekas, Tahun pembuatan: 2003, Presskraft 50 t Hub 800 mm Ständerweite 2250 mm Abstand Tisch/Stößel, großer Hub oben, Verstellung oben 1600 mm Tischfläche 2250 x 1200 mm Hedpfsvuun Hjx Ag Rjni Stößelfläche 2250 x 1200 mm Eilgang abwärts 350 mm/s Eilgang aufwärts 190 mm/s Arbeitsgeschwindigkeit 27,5 mm/s Ölkapazität 800 l Antriebsleistung 24,2 kW Gewicht 13,0 t Platzbedarf ca. 3,75 x 2,75 x 4,67 m (L x B x H) Für Handbeschickung gemäß CE-Norm zugelassen Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, Lichtschranke (Sick) vorn und hinten, hydraulische Stößelverriegelung (Sitema), Lichtschranke mit Aktivstart

Kondisi: bekas, Tahun pembuatan: 1991, Press force 500 t Upright width 1910 mm Hnedpfx Asvuuiqog Roi Stroke 500 mm Distance table/ram, max. stroke upper position, adj. upper position 700 mm Table area without shear impact damper 1910 x 1360 mm Table area with shear impact damper 1600 x 1360 mm Table height above floor 800 mm Ram area 1600 x 1270 mm Side frame opening 600 mm Downward speed 400 mm/s Upward speed 330 mm/s Working speed 10 - 28 mm/s Oil capacity 1200 l Drive power 60.0 kW Weight 40.0 t Space requirement (LxWxH) 3.6 x 2.5 x 5.0 m Total height above floor 4.5 m Approved for manual loading operations according to German accident prevention regulations (UVV) with hydraulic drive system, shear impact damping, ram locking, two-hand control Table size depending on shear impact damper: - Without: approx. 1910 x 1360 mm - With: approx. 1600 x 1360 mm Can be offered as-is, ready for operation as currently equipped, or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1979, Pressure 160 t Gap between uprights 1620 mm Stroke 600 mm Distance table/ram, stroke at top 800 mm Table area 1600 x 1100 mm Table height above floor 750 mm Cushion pressure in table 63 t Cushion stroke in table 180 mm Cushion area in table 1300 x 750 mm Lateral upright clearance 600 mm Ram area 1600 x 1100 mm Oil capacity 1160 l Drive power 30.0 + 16.0 kW Weight 23.6 t Space requirement (WxDxH) 2.9 x 2.3 x 4.65 m Height above floor 4.26 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table No foundation pit required Hnsdpfxjvut Rys Ag Roi Can be offered as is, with commissioning, or alternatively with new Siemens S7-1500 F control system Video at the seller available prior to dismantling

Kondisi: bekas, Press force: 1000 t Table length: 2110 mm Table width: 1755 mm Stroke: 500 mm Number of strokes/min: 18 min Working height: 380 mm Eccentric type: 4-point Machine weight approx.: 107.25 t Required space approx.: / m WILKINS & MITCHELL Deburring Press with Accessories Hodpsgrnaqefx Ag Rsni Press force: 1000 t With ejection table and gearing component Table size: 2110 x 1755 mm Weights Frame: 47.1 t Table: 8.84 t Guides: 1.72 t Drive: 26.47 t Counterbalance cylinder: 1.65 t Motor mount and safety guard: 2.04 t Ram: 11.53 t Adjusting screws and bolts: 2.66 t Ram adjustment: 0.85 t Miscellaneous: 1.02 t Hydraulic ejector: 0.52 t Total weight: 107.25 t

Kondisi: baik (bekas), Tahun pembuatan: 1995, Press Tuschier Dua Stempel MOSSINI PO/2M/P800, No. 0481, tahun pembuatan 1995, gaya tekan 800 t, area kerja 3.200 x 2.000 x 1.800 mm Hsdpeyhquasfx Ag Roni

Kondisi: bekas, Tahun pembuatan: 2018, Perangkat angkat paralel 4-ganda HYLATECHNIK PGHD 10/100, No. 30014, tahun pembuatan 2018, berat 420 kg Hnodsyhqqzepfx Ag Rei

Kondisi: bekas, Tahun pembuatan: 1984, de_001 Hnodpfx Asyacpasg Roi

Kondisi: baik (bekas), Tahun pembuatan: 1981, druck-300t-ott-hydraulikpresse Hnedpfx Aex Uru Njg Rsi

Kondisi: bekas, Tahun pembuatan: 1972, Pressure: 800 t Hedpfx Aovuuhyog Roni Column gap: 3250 mm Stroke: 1100 mm Distance table/ram, stroke up: 1900 mm Table surface: 3100 x 1900 mm Blank holder pressure in table: 300 t Blank holder stroke in table: 300 mm Blank holder area in table: 2500 x 1800 mm Blank holder pressure in ram: 80 t Blank holder stroke in ram: 200 mm Blank holder area in ram: 2200 x 1000 mm Ram surface: 3100 x 1900 mm Lateral column opening: 900 mm Oil capacity: 4700 l Drive power: 200.0 kW Space requirement (LxWxH): 4.95 x 3.3 x 10.2 m Height above floor: 7.05 m With electro-hydraulic drive, hydraulically controlled blank holder in table and ram, hydraulic cutting impact damping. Dismantled and stored – Video at seller available before dismantling.

Kondisi: bekas, Tahun pembuatan: 1973, Pressure: 1,600 t Column gap: 4,100 mm Ram stroke: 1,450 mm Distance table/ram, ram up: 2,750 mm Distance table/blank holder, ram up: 2,200 mm Table area: 4,000 x 2,200 mm Ram force: 1,000 t Blank holder force: 600 t Blank holder stroke: 1,000 mm Blank holder area: 4,050 x 2,200 mm Ram area: 3,200 x 1,650 mm Cushion force in table: 360 t Cushion stroke in table: 300 mm Cushion area: 3,500 x 1,600 mm Lateral column passage: 1,100 mm Oil capacity: 9,000 l Drive power: 390.0 kW Weight: 250.0 t Space requirement (W x D x H): 5.95 x 4.3 x 10.5 m Height above floor level: 8.6 m With oil-hydraulic drive, hydraulically controlled die cushion in table and ram Hjdpfjvut Ifox Ag Rjni Dismantled, stored – video from seller available prior to dismantling.

Kondisi: bekas, Tahun pembuatan: 1990, druck-25t-gesamtleistungsbedarf-4kw-200mm-nach-innen-platz Hnodpfx Aexzk S Djg Rji