Beli Unit penyedot debu bergerak bekas (154)

Kondisi: baru, Exhibition machine Type A according to DIN EN 16770:2018 without fire extinguishing system, tested in accordance with the GS-HO-07 inspection principles of the BGHM. The dust extractor is a mobile extraction and filtration unit for commercial use, designed for installation in the work area. The extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic chips and dust from various processing machines. Consists of a vacuum-resistant housing with suction inlet and backflow flap, antistatic filter elements with jet-pulse cleaning, a high-performance radial fan with IE3 efficiency class three-phase motor located on the clean air side, as well as integrated exhaust air sound insulation and air outlet grille. Equipped with 2 swivel and 2 fixed casters, 2 chip bins with discharge bags, and a control system with 5 m connection cable and CEE power plug. The control panel is designed for automatic operation. Automatic start-up control for a maximum of 6 machines and automatic filter cleaning with run-time addition are included. Either pickup coils or volt-free contacts from the machines can be used for the automatic start function. Single-component PVC coating in RAL 9006 (white aluminum). The machine is delivered ready for operation and fully assembled. For filter cleaning, pre-treated compressed air must be provided on site (connection via plug nipple NW 7 / 6 bar). Technical Data: Suction inlet: Ø 250 mm Residual dust content: < 0.1 mg/m³ H3 Filter area: 21 m² Cleaning: offline – compressed air jet-pulse Compressed air supply: 6 bar (connection: plug nipple NW 7) Air flow rate: 4,500 m³/h Nominal air flow (at 20 m/s in the suction inlet): 3,530 m³/h Vacuum (at the suction inlet with nominal air flow): 2,700 Pa Maximum sound pressure level (distance to unit 1m): 67 dB(A) Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 rpm, IP 54 Operation mode: continuous, intermittent Collection bin volume: 2 x 165 liters Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm Weight: approx. 705 kg Accessories: Hjdevwfu Nepfx Ag Rofr 1 frequency inverter 5.5 kW for the fan of the SMU dust extractor, Manufacturer: Eaton (Item No. 114004) with control integrated into the extractor's control system to maintain constant air flow as the filter saturates, including safe fan stop during filter cleaning. Custom adjustment of suction pressure / air flow based on current requirements. The inverter increases system effectiveness, saves energy, and reduces wear on materials and machine. Technical features: - Motor power 5.5 kW - integrated PID controller - automatic energy optimization - integrated manual/automatic switch-over - commissioning menu for quick parameter setting - integrated EMC filter according to EN 55011-1B - synchronization with a free-running motor shaft - includes pressure sensor 0-50 mbar (pressure cell) 1 slide valve control for 1–8 processing machines (Item No. 113197) Control of up to 8 electro-pneumatic shut-off valves in the extraction ducting at the respective processing machines, triggered by volt-free contacts or pickup coils at the machines. 8 pickup coils STWA1 (Item No. 600668) For contact pickup at processing machines, suitable for all STW types.

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, luas filter: 13,5 m², tekanan negatif: 2.450 Pa, tinggi total: 2.125 mm, lebar total: 870 mm, panjang total: 2.045 mm, berat keseluruhan: 340 kg, laju aliran nominal: 1.832 m³/jam, tegangan masuk: 400 V, daya: 3 kW (4,08 hp), kecepatan rotasi (min.): 2.865 rpm, frekuensi input: 50 Hz, Schuko deduster/extraction unit Vacomat 180 X Pe Hfedpov Iam Isfx Ag Rjr Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 1997 Airflow: 2,950 m³/h 200 mm suction nozzle Motor: 3.7 kW, 400 Volt Hfodpfx Ajv A Rv Aog Rjr Technically in very good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tekanan negatif: 2.630 Pa, laju aliran volumetrik: 8.000 m³/jam, laju aliran nominal: 6.950 m³/jam, daya: 11 kW (14,96 hp), H 3 "GS dust-tested" Extraction connection 350 mm diameter Hjdpfx Aswty Uzjg Rjfr Pneumatic JET filter cleaning Extinguishing unit with powder extinguisher With rotary airlock valve