Beli Oven bekas (231)

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), 10-2 Bar, Tahun produksi 2002 Dedpfeykyqijx Aaqokl

Kondisi: sangat baik (bekas), en-GB_Sat_B2599A_Drawer_Oven_130_Celsius Dsdpfx Ajim Ik Soaqjkl

Kondisi: baru, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, BHK-TECH MW50-2V Microwave System System and Function Description Microwave system consisting of two MW50 V microwave modules, an internal roller conveyor, and two external roller conveyors. The main microwave chamber is constructed from 3 mm stainless steel sheet and features side-mounted control cabinet segments where high-frequency components are installed behind mechanically and electrically secured covers. The roller conveyor system for transporting pallets within the system is fabricated with microwave-shielded housing. The microwave system is equipped with a total of 32 magnetrons, which deliver energy directly into the interior chamber. This technology ensures even energy distribution within the chamber. The magnetrons can only be activated when the door is closed and properly sealed. A door seal system prevents microwave leakage. Any generated vapors are extracted by two exhaust fans with a total capacity of 17,000 m³/h (free-blowing). The required cooling for the high-frequency components is provided via the air stream from the exhaust fans, supported by four supply air fans (each with a free-blowing capacity of approx. 3,500 m³/h). Each side of the system features a dedicated, driven roller conveyor. Pallets are loaded and unloaded manually by the user. Sensors verify the correct position of the pallet on the conveyor. The process is initiated via switch on the control panel. The loaded pallet is conveyed into the microwave system and positioned via light barrier. The microwave system doors are closed and the microwave irradiation process begins. After completion, the doors open and the pallet is conveyed to the unloading roller conveyor. The operating time of the magnetrons can be preset on the main control panel in four power levels. Dsdpfxewhvcwe Aaqskl Manufacturer: BHK-TEC Microwave Oven Type: MW50-2V Number of Magnetrons: 32 Voltage: 400 V 50/60 Hz Connected Load: 70 kW Main Fuse: 250 A Frequency: 2450 MHz Compressed Air: 6-10 bar Year of Manufacture: 2016 Emissions Sound Pressure: 80 dB Frequency: 50/60 Hz Exhaust Air: 2 x 8,500 m³/h Supply Air: 4 x 3,500 m³/h Supply Air Connection: 2 x 346 mm Ø Exhaust Air Connection: 1 x 465 mm Ø Dimensions and Weight Microwave Oven: (LxWxH) 3,735 x 2,373 x 4,756 mm Min. Ceiling Height: 5,000 mm Usable Internal Space: (LxWxH) 3,100 x 1,200 x 1,200 mm Max. Permissible Conveyor Load: 3,000 kg Max. Total Weight: 9,000 kg Net Weight: 6,000 kg Control Cabinet: (LxWxH) 3,800 x 520 x 2,250 mm Weight: 700 kg The machine is in absolutely new condition The machine has never been used New price 300,000 € Financing through our bank is also possible: komplett-konzept.leasingo.de Other ovens in various sizes – new and used – available in our shop! International shipping rates upon request!

Tahun pembuatan: 2009, Kondisi: baik (bekas), translate-01 Dkedsx Sw N Hepfx Aaqsl

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Usable capacity: 7.7 m³, max. temperature: 250°C, heating capacity: 54 kW, volumetric flow rate: 15 m³/min. Dksdpfoilhucox Aaqsl

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Heated area: 1600x2600 / 2000x2000 mm, rated power: 120 kW, length: 2600 mm, width: 2300 mm, including control cabinet and conveyor belt. Dkedpfxsifpuas Aaqsl

Kondisi: siap digunakan (bekas), Maximum operating temperature: 1120°C, heated length: 1000 mm, cooling length: 1850 mm, channel height: 40 mm, conveyor belt width: 110 mm, throughput speed: 100–1000 mm/min, split gas consumption: 1.5–2.5 Nm³/h, control panel: Siemens SIMATIC HMI, length: 5000 mm, width: 650 mm, height: 1350 mm, with integrated ammonia cracker GSP 25 FA, integrated gassing panel, protective gas from ammonia cracker (ammonia supply provided by customer) + N2 purge gas as required, measuring and control system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection possible. Dsdpfsq Ttz Eox Aaqskl

Tahun pembuatan: 1991, Kondisi: siap digunakan (bekas), Operating/nominal temperature: 800/850°C, internal dimensions: 1100x500x260 mm, heating power: 120 kW, connected load: 1.5 kW, with documentation, without accessories or spare parts. On-site inspection is possible. Dkodpfxopcgzgj Aaqjl

Kondisi: baik (bekas), Basket size (LxWxH) 300 x 210 x 460 mm 150-500 degrees MARCELS MASCHINEN AG Dodpfx Aashz D Iwjqokl

Tahun pembuatan: 2026, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. Dkodpfxofz Anpj Aaqol VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2026, Kondisi: baru, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Dodsfy T H Ispfx Aaqjkl Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Dijual oven Rosenberger dengan kapasitas 500 liter. Dkjdpsyha Tfjfx Aaqol Oven dilengkapi dengan elemen pemanas spiral baru. Dimensi: Dimensi luar: Tinggi: 161 cm Lebar: 100 cm (dengan kontroler: 123 cm) Panjang: 135 cm Ruang bakar: Tinggi: 100 cm Lebar: 62 cm Kedalaman: 82 cm

Tahun pembuatan: 1981, Kondisi: bekas, Rincian teknis: Tinggi di atas lantai: 850 mm Kebutuhan daya total: 2,5 kW Suhu: 200 °C Dodpfx Aasu N Agksqjkl Tegangan: 220/50 V / Hz Berat mesin sekitar: 80 kg Kebutuhan ruang sekitar: P:0,85xL:0,6xT:1,15 m Bidang aplikasi: Instalasi pengeringan Ukuran dalam: L:0,50xD:0,42xT:0,60 m Bukaan pintu: L:500xT:600 mm Ruang dalam memuat 3 rak (D:370xL:490 mm), rak paling atas telah dilepas karena termometer menjorok jauh ke dalam ruang. (Foto hanya sebagai perbandingan) Oven diuji hingga 160°C, dengan keterbatasan: 2 elemen pemanas atas berfungsi baik dan 2 elemen pemanas bawah tidak berfungsi (mungkin perlu diganti!)

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), Bruttobrennraum: 800l, Nutzbrennraum: 500l, Brennraumdimensionen X/Y/Z: 820mm/600mm/1015mm, Anschlusswert: 100kW, max. Betriebstemperatur: 1400°C, Maschinendimensionen X/Y/Z: ca. 1450mm/1150mm/2100mm, Gewicht: ca. 1500kg. Inklusive Frischluftgebläse und Schaltschrank mit Regler Jumo Imago 500. Eine Besichtigung vor Ort ist möglich. Dkjdpfoyfv N Rsx Aaqjl

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), Sebuah oven ruang aliran udara Nabertherm tersedia. Daya terpasang: 30 kW, suhu maksimum: 650°C, volume: 500 l, waktu pemanasan: sekitar 60 menit, dimensi internal X/Y/Z: 750 mm/1000 mm/750 mm. Dimensi mesin: sekitar 1300 mm/1900 mm/1850 mm, berat: sekitar 750 kg. Dokumentasi tersedia. Inspeksi di lokasi memungkinkan. Dkedpfx Aasxrf Iujqjl

Kondisi: siap digunakan (bekas), Tersedia oven kamar lantai dengan merek tidak diketahui. Volume dalam: sekitar 4 m³, rentang suhu: 50°C-400°C, dimensi dalam X/Y/Z: sekitar 1800mm/1500mm/1800mm, dimensi mesin X/Y/Z: sekitar 2500mm/2500mm/2500mm. Inspeksi di lokasi memungkinkan. Dkedpfxoxp Rbhs Aaqol

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), de Dedpfxsxz Ew Ij Aaqekl

Kondisi: siap digunakan (bekas), A continuous tunnel furnace is available. The furnace was part of a bending system used for manufacturing flange rings. Machine dimensions (X/Y/Z): approx. 14,000 mm / 500 mm / 1,500 mm. Control system: CNC. Documentation is available. An on-site inspection is possible. Dedpfx Aowkiipoaqjkl

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), An ITG induction system for the heat treatment of workpieces with a vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382 kVA, rated current: 552 A. Documentation included. An on-site inspection is possible. Dsdpfow Exrvox Aaqokl

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), A Herdecke pot furnace for the heat treatment of ring pipes is available. Maximum temperature: 1000°C, operating medium: protective gas, maximum net batch weight: 1,200 kg, loading height: 3,850 mm, furnace diameter: 2,200 mm, furnace height: 4,650 mm. Includes 3 vacuum-tight, water-cooled recirculation units and 3 recirculation impellers. Documentation available. On-site inspection possible. Dkodpfxsvxvgre Aaqol

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), de_001 Dkedpfxeygw S Ao Aaqsl

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), 468a3c8c-7e2d-4b4d-bd57-4638e98cbb5f Dodpfx Aaoxt Rmleqjkl

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), A brand-new, unused Tanabe rotary kiln, still in its original packaging and complete with all necessary accessories, is available. 1) Rotary kiln: Length: 17 m, Height: 2400 mm (+400 mm/600 mm extension), Width including drive: 2600 mm, Heated zone X/Y: 700 mm/8000 mm, Heating capacity: 200 kW, Max. temperature: 500°C–550°C (up to 900°C possible with retort change and heating upgrade), Feed: screw feeder, Variable rotary speed: 0.5–2 rpm, Weight: approx. 23,500 kg, including separate combustion air preheater. 2) Rotary tube cooler: Length: 10,600 mm, Height: 1,600 mm (+400 mm/600 mm extension), Width including drive: 2,200 mm, Cooled zone X/Y: 700 mm/3,500 mm, Cooling method: water cooling with water circuit, Variable speed: 1.1–4.3 rpm, Outlet: rotary valve, Weight: approx. 8,200 kg. 3) Exhaust air filter including exhaust fan, HEPA filter, and dust collection bin with a temperature tolerance of 250°C. Control: Siemens plant control system for local operation, 3x HMIs, multiple operator panels, and control cabinets. Includes various accessories such as spare parts, transport aids, and related smaller units. The complete plant is brand new and still in its original packaging. The photos were taken at the manufacturer’s site. Full documentation available. On-site inspection possible. Dsdpfxjulkume Aaqjkl

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), A Thermconcept high-temperature tube furnace is available. Max. temperature: 1700°C, heated length: 200 mm, tube diameter/length: 60 mm/600 mm, power: 3.3 kW, dimensions (W/D/H): 460 mm/530 mm/830 mm. Documentation included. Dsdpfx Astxb Avjaqjkl

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Volume: 1000 l, max. temperature: 750°C, heating power: 40 kW, machine dimensions (L/W/H): approx. 2500 mm / 1600 mm / 1900 mm, weight: approx. 2000 kg. Documentation available. On-site inspection possible. Expected to be available from October/November 2025. Dsdpfx Asw Emyzeaqskl