Beli Mesin cetak injeksi lainnya bekas (100)

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), An injection moulding machine with two units from Klöckner Ferromatik Desma GmbH, Windsor Plant Maintal, is available. Shot volume: 2 x 30,150 cm³, clamping force: 40,000 kN, injection pressure: 1,800 bar, cooling water requirement: 2 x 18.1 m³/h, total power requirement: 2 x 700 kW. Weight of clamping unit: 2 x 175 t, weight of injection unit: 2 x 50 t, total system weight: 450 t. On-site inspection is possible. Hfodpfx Ajv T Aqajdqsn

Kondisi: siap digunakan (bekas), Clamping force: 350 kN, tie bar distance: 280 mm/280 mm, platen dimensions X/Y: 410 mm/410 mm, minimum mold installation height: 180 mm, maximum opening stroke: 350 mm, maximum platen distance: 530 mm, screw diameter: 22 mm, shot volume: 47.5 cm³, shot weight (PS): 41 g, injection pressure: 2440 bar, control system: NC4, heating capacity: 6.3 kW. Machine dimensions X/Y/Z: approx. 3100 mm/1100 mm/1600 mm, weight: approx. 1800 kg. An on-site inspection is possible. Hfsdpswaa H Dofx Adqen

Tahun pembuatan: 1991, Kondisi: siap digunakan (bekas), Clamping force: 12,000 kN, opening force: —, opening stroke: —, clamping speed: 1030 mm/s, max. mold weight: 22.5 t, max. platen dimensions: 1900 x 1950 mm, tie bar diameter: 220 mm, ejector force: 130 kN, screw diameter: 133 mm, injection pressure: 1,445 bar, width: 3,500 mm, length: 14,745 mm, height: 2,740 mm. Complete with documentation. On-site inspection is possible. Hfedpfx Adjwbpzaeqjn

Kondisi: bekas, Tahun pembuatan: 2006, A Demag Ergotech injection moulding machine, including a Wittmann robot and machine enclosure, is available. 1) Demag Ergotech 50/355-200 injection moulding machine, year of manufacture: 2006, tie bar spacing X/Y: 355mm/355mm, min. mold height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, shot weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control system: CDIAS. 2) Wittmann W721 handling robot, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Safety cage. Documentation available. An inspection on site is possible. Hodpfxjwvadne Adqefn

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), An injection molding machine Ferromatik Milacron without auxiliary and peripheral equipment is available. Clamping force: 1000 kN, injection pressure: 2000 bar, shot volume: 254 cm³, heating capacity: 14.8 kW, tie bar spacing: 508 mm, machine weight: approx. 6750 kg, operating hours: approx. 33,649 h. An on-site inspection is possible. Hjdpfx Aowut Htedqofn

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Minimum/maximum installation height: 200mm/550mm, opening stroke: 350mm, clamping force: 350kN, screw diameter: 20mm, tie bar spacing: 270mm, max. injection volume: 31cm³, operating hours: 61,737h. Documentation available. On-site inspection possible. Hfjdpfot E Tq Dsx Adqen

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Mounting height min./max.: 250mm/750mm, Opening stroke: 500mm, Clamping force: 1000kN, Screw diameter: 35mm, Tie bar distance: 420mm, Max. injection volume: 144cm³, Operating hours: 54,164h. Documentation available. On-site inspection possible. Hedpfx Aet E Trbedqsfn

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Clamping force: 500 kN, screw diameter: 30 mm, injection volume: 101 cm³, shot weight: 92 g, injection pressure: 1488 bar, platen dimensions X/Y: 540 mm/540 mm, tie bar distance: 321 mm, mold opening stroke: 350 mm, mold height min./max.: 200 mm/550 mm, weight: approx. 2300 kg. Includes 1 hydraulic core pull. Hfjdpstw Dursfx Adqjn

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Clamping force: 250 kN, tie bar distance: 270 mm/270 mm, platen dimensions X/Y: 380 mm/380 mm, screw diameter: 25 mm, injection volume: 49 cm³, shot weight (PS): 45 g, injection pressure: 2000 bar, cores: 2+5, heating zones: 12. Pump operating hours: 2,388 h, automatic operation: 1,600 h. Includes Multilift H with B-axis, cleanroom module. Hedpfx Ajtyax Eedqjfn

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), A compact Boy injection moulding machine is available. Clamping force: 220 kN, tie bar spacing X/Y: 254 mm/254 mm, max. daylight: 400 mm, min. mould height: 200 mm, opening stroke: 200 mm, ejector stroke: 80 mm. Screw diameter: 24 mm, shot volume: 36 cm³, shot weight: 32 g, injection pressure: 1,455 bar. Machine dimensions (L/W/H): 1,800 mm/1,000 mm/2,600 mm, weight: approx. 750 kg, control system: Dipronic. Inspection on site is possible. Hedpfx Adowhy S Asqsfn

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Clamping force: 400 kN, heating capacity: 5.5 kW, connected load: 20.5 kW, weight: 4.7 t, operating hours: 18,287 h, on-site inspection possible. Hedpfx Asrc Hibjdqefn

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Maximum clamping force: 800 kN, heating capacity: 9.4 kW, pump motor power: 1 x 18.5 kW, connected load: 27.9 kW, weight: 7.4 t, on-site inspection is possible. Hodpfx Adjum U S Eeqofn

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), Two complete injection moulding production units are available, each equipped with two Husky injection moulding machines, four complete moulds with all-metal separators, gravimetric blending systems from Motan, and overhead crane systems. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, maximum shot weight: 2424g, maximum PET throughput: 390kg/h. 2) 48-cavity H-PET mould, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s–12.7s. 3) 48-cavity H-PET mould, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s–15s. 4) 32-cavity H-PET mould, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s–11.7s. Hfsdpew Az Riofx Adqjn 5) 32-cavity H-PET mould, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s–14s. Overall system dimensions (L/W/H): approx. 24m/13m/5.5m. The offer includes a drying unit, mould dehumidification, colour dosing equipment, and a T-conveyor. Documentation is available. An on-site inspection is possible.

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Clamping force: 62.5 kN, opening stroke: 110 mm, ejector force: 6.4 kN, ejector stroke: 60 mm, platen distance: 119 mm–229 mm, fixed platen (tool carrier): 247 mm/172 mm, moving platen (tool carrier): 128 mm/155 mm, screw diameter: 12 mm, injection volume: 6.8 cm³, injection pressure: 1360 bar. Machine dimensions (L/W/H): approx. 700 mm/1200 mm/1650 mm, weight: approx. 350 kg. Documentation available. An on-site inspection is possible. Hjdpfxewyxa Ne Adqofn

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Minimum/maximum installation height: 250 mm / 750 mm, opening stroke: 500 mm, clamping force: 1,500 kN, screw diameter: 40 mm, tie-bar spacing: 420 mm, injection volume: 182 cm³, operating hours: 98,234 h. Documentation available. On-site inspection possible. Hfodpet E Trhefx Adqjn

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), A total of 9 partially dismantled injection moulding machines from Krauss Maffei are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. All injection moulding machines include robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation available. On-site inspection possible. Hodpfx Adeugmx Aoqefn

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), There are 5 identical Engel injection moulding machines available. Screw diameter: 2x 30 mm / 3x 35 mm, clamping force: 80 t, weight: approx. 4,400 kg. All machines include an overhead crane. One Engel machine (see image 5) is used as a parts donor for the remaining 4 machines. Documentation is available. An on-site inspection is possible. Hsdpfx Adeu Afz Dsqjfn

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Clamping force: 250 kN, injection force: 20 kN, opening force: 65 kN, max. opening stroke: 275 mm, mould installation height: 200 mm, platen distance: 475 mm, tie bar spacing: 220 mm, platen dimensions X/Y: 400 mm/400 mm, screw diameter: 22 mm, shot volume: 30 cm³, shot weight: 25 g/PS, weight: approx. 1,900 kg, operating hours: approx. 42,046 h. Documentation available. Inspection on site possible. Hedjwxxvzepfx Adqofn

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Clamping force: 2000 kN, screw diameter: 40 mm, nozzle diameter: 2.5 mm, effective screw length: 20 mm, max. shot volume: 201 cm³, max. shot weight (PS): 184 g. Hours in automatic operation: 20,700 h, pump hours: 27,800 h, cycles: 3.4 million. Documentation available. On-site inspection possible. Hfjdpfx Asr N Rh Hodqjn

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), Screw diameter: 30 mm, clamping force: 50 t, heating capacity: 11 kW, weight: 2.9 t, comes with documentation, on-site inspection possible. Hfsdpfork Rxqex Adqon

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Ten injection moulding machines available: 1) Netstal SynErgy 1500/460, year of manufacture: 1998, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mould height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 9,200kg, operating hours: 129,131h. 2) Netstal SynErgy 1500/460, year of manufacture: 2007, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mould height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 11,500kg, operating hours: 85,445h. 3) Netstal SynErgy 1500/460, year of manufacture: 2006, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/750mm, max. opening stroke: 450mm, screw diameter: 45mm, injection volume: 255cm³, mould height min./max.: 250mm/550mm, max. injection pressure: 1753MPa, weight: approx. 11,000kg, operating hours: 91,159h. 4) Netstal SynErgy 900/230, year of manufacture: 2007, clamping force: 100t, tie bar distance: 410mm, max. opening stroke: 350mm, screw diameter: 40mm, min. mould installation height: 200mm, weight: 6,800kg, operating hours: 73,323h. Hfsdpfx Ajv Amrmjdqen 5) Netstal SynErgy 900/230, year of manufacture: 2007, clamping force: 100t, tie bar distance: 410mm, max. opening stroke: 350mm, screw diameter: 40mm, min. mould installation height: 200mm, weight: 6,800kg, operating hours: 87,883h. 6) Netstal SynErgy 1500/230, year of manufacture: 2000, clamping force: 140t, tie bar distance: 510mm, platen dimensions X/Y: 750mm/870mm, max. opening stroke: 450mm, screw diameter: 40mm, injection volume: 161cm³, min. mould installation height: 250mm, max. injection pressure: 1447MPa, weight: 11,000kg, operating hours: 93,464h. 7-8) Netstal ELION Force 800-270, year of manufacture: 2008, clamping force: 80t, tie bar distance: 410mm, platen dimensions X/Y: 600mm/632mm, max. opening stroke: 350mm, screw diameter: 40mm, injection volume: 161cm³, mould height min./max.: 250mm/500mm, max. injection pressure: 1690MPa, weight: 7,800kg, operating hours: 82,400h. 9) Netstal SynErgy 800/230, year of manufacture: 2005, clamping force: 100t, tie bar distance: 510mm, platen dimensions X/Y: 617mm/600mm, max. opening stroke: 350mm, screw diameter: 40mm, injection volume: 161cm³, min. mould installation height: 200mm, weight: 6,800kg, operating hours: 97,530h. 10) Arburg Allrounder 370C, year of manufacture: 1997, clamping force: 370t, platen dimensions X/Y: 570mm/570mm, max. opening stroke: 500mm, screw diameter: 30mm, injection volume: 70cm³, min. mould installation height: 250mm, max. injection pressure: 1500MPa, weight: approx. 3,600kg. Documentation available. Inspection on site is possible.

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), An injection moulding machine from Boy is available. Clamping force: 100 kN, tie bar spacing (diagonal): 205 mm, max. platen distance: 250 mm, ejector stroke: 50 mm, screw diameter: 14 mm, shot volume range: 1 cm³ / 15.3 cm³, machine dimensions (L/W/H): approx. 1500 mm / 550 mm / 1400 mm, weight: approx. 500 kg, control system: Procan ALPHA. Documentation available. On-site inspection is possible. Hedpfx Aov Ext Ijdqsfn

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), Three Ferromatik Milacron injection moulding machines are available. Output: 1x15kW / 2x37kW, power consumption: approx. 136A, machine weight: approx. 38,000kg. On-site inspection is possible. Hfodpfx Adsv T Ap Njqen

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Various used injection moulding machines are available: 1) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, clamping force: 80 t, screw diameter: 30 mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm/25 mm, year of manufacture: 2003, operating hours: approx. 100,000 h. 4) Demag ET 150/500-610h/120v multi, clamping force: 150 t, screw diameter: 50 mm/25 mm, year of manufacture: 2006, operating hours: approx. 105,000 h. 5) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 6) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 7) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. Hfjdpfx Asv R Ew Dsdqon 8) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 67,000 h. 9) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2007, operating hours: approx. 98,000 h. 10) Engel VC 740/150 electric, clamping force: 150 t, screw diameter: 50 mm, year of manufacture: 2006, operating hours: approx. 103,000 h. 11) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2000. 12) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2001. 13) Demag ET 200-560-840 concept, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2002. 14) Engel VC 940/200 electric, clamping force: 200 t, screw diameter: 60 mm, year of manufacture: 2006, operating hours: approx. 107,000 h. Documentation is available. On-site inspection is possible. Machines can be sold individually.

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Three Arburg injection moulding machines including Stäubli handling robots are available. 1. Arburg Allrounder 420C 1000-100, year of manufacture 2000, screw diameter 25 mm, max. injection volume 49 cm³, centering 125 mm, control system Selogica 3.060, operating hours 96,839 h. Including Stäubli RX130 CS7Bm robot, year 2000. 2. Arburg Allrounder 420C 1000-100, year of manufacture 2000, screw diameter 25 mm, max. injection volume 49 cm³, centering 125 mm, control system Selogica 3.060, operating hours 103,227 h. Including Stäubli RX130 CS7B robot, year 2000. Hfedpeu St I Rofx Adqon 3. Arburg Allrounder 370S 700-100, year of manufacture 2010, screw diameter 15 mm/20 mm/25 mm, centering 125 mm, control system Selogica direct 4.090, operating hours 49,833 h. Including Stäubli RX130 CS7B robot, year 2000. Documentation available. On-site inspection possible. Sale of individual units possible.