Beli Battenfeld bekas (118)

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 291257-100, RINCIAN MESIN Berat bersih: 23.500 kg / 8.500 kg Ijdpfxsxyizho Ab Ioa Hidrolik – Tekanan kerja: 231 bar Data listrik Arus nominal motor: 109 A Tegangan kontrol: 230 V Frekuensi: 50 Hz

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 Injection unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2100 bar Dosage volume: 251 cc Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Ijdpfxexzzwqe Ab Iea Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pump/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in technical live tests at our facility in Łódź. Price: On request

Kondisi: baik (bekas), Tahun pembuatan: 2002, jam operasional: 7.192.484 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 58985, Detail teknis Gaya pengunci: 3500 kN Ukuran pelat cetakan (t x l): 1100 mm x 1016 mm Jarak antara batang pengikat (t x l): 800 mm x 710 mm Langkah pembukaan cetakan: 670 mm Tinggi cetakan minimum: 375 mm Tinggi cetakan maksimum: 710 mm Maks. daylight: 1380 mm Iodpfx Abjxzdnre Ioa Ejektor hidrolik - langkah: 250 mm Gaya ejektor maju/mundur: 81 kN Unit injeksi Diameter screw: 55 mm Rasio Ls/D: 22 Tekanan injeksi: 2041 bar Volume langkah: 653 cm³ Berat shot PS: 594 g Kecepatan screw: 253 rpm Kapasitas plastisasi maks.: 52 g/detik

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.800 kN, Battenfeld HM 180 /525H/60V Gaya penutupan: 180 ton Tahun produksi: 2009 Berat injeksi: 175/20,8 g Unit injeksi .../525/....60 Diameter ulir: 35/18 mm Tekanan spesifik injeksi: 2743/2593 bar Volume injeksi: 193/22,9 cc Berat injeksi: 175/20,8 g Rasio L/D ulir: 22/20 Sistem penutup cetakan 180/... Gaya penutupan: 180 ton Jarak antar kolom: 570 x 520 mm Tinggi cetakan: 305 mm Langkah ejektor: 200 mm Tahun produksi: 2009 Perlengkapan: - Meja putar servo drive Iedjxyw Euepfx Ab Ija - 3 x inti hidrolik

Kondisi: sangat baik (bekas), Here we offer a SmartPower 210/1330 Duroplast injection molding machine. Wittmann Battenfeld injection molding machine with UNILOG B8 control system The unit was serviced/inspected by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 and brought up to the latest possible standard. As part of the comprehensive inspection, various updates were installed and the hydraulic oil (600 liters) was replaced. In addition to the standard pressure switches, the unit allows for the installation of an additional two cavity pressure sensors (Kistler module for mold cavity pressure switch-over: Range 1: 20,000 pC; Range 2: 10,000 pC). The components for upgrading with cavity pressure sensors are included in the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control system: UNILOG B8 Machine number: 137949-100 Machine weight gross/net Main dimensions of the machine Noise level (DIN EN ISO 3744-46): 65 dB(A) Ambient temperature: +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Total operating hours: 1,437 h Hydraulic system: Hydraulic oil tank capacity Oil temperature min / max (HLP 32): min 30°C (86°F) / max 40°C (104°F) Iodpefphtvefx Ab Ija Oil temperature min / max (HLP 46): min 40°C (104°F) / max 50°C (122°F) Activation temperature for oil cooling (HLP 32): 35°C (95°F) Activation temperature for oil cooling (HLP 46): 45°C (113°F) Electrical system: Drive power, hydraulic pump: 37 kW Motor voltage Frequency Maximum screw barrel temperature: 350°C (662°F) Water system: Oil cooler: Cooling water consumption approx. 0.5 - 1.5 m³/h (0.65 - 1.96 cu yd) Cooling water inlet max. 35°C (95°F) NW ⅜" Cooling water manifold: Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi) Cooling water return ∅ ¾" SmartPower 210 injection unit 1330 Screw diameter: 50, 55, 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Theoretical shot volume: 540, 653, 913 cm³ Specific injection pressure: 2470, 2041, 1461 bar Max. screw speed: 278 min-¹ Max. plasticizing rate PS: 42, 52, 62 g/s Screw torque: 1920 Nm Nozzle stroke / force: 400/100 mm/kN Free injection flow rate: 248, 300, 419 cm3/s Cylinder heating capacity: 21.9, 24.2, 27 kW Number of heating zones incl. nozzle: 5 Clamping unit SmartPower 210 Clamping force: 2100 kN Type: SmartPower 210 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. Details are not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, pl-hu-01 Isdpfjxyqxzsx Ab Iea

Kondisi: bekas, Tahun pembuatan: 2014, gaya penjepit: 270 kN, volume langkah: 653 cm³, tekanan injeksi: 2.041 batang, berat keseluruhan: 12.500 kg, jam kerja: 35.000 h, diameter konveyor sekrup: 55 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan Isdpfx Ajw U Et Djb Isa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Wittmann Battenfeld EcoPower 110/350 / All-Electric Injection Moulding Machine / Production Line with Wittmann W818 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Shot volume: 169 cm³ Clamping Unit: Clamping force: 110 t Tie bar distance: 470x420 mm Platen size: 680x660 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B6 – touchscreen Additional equipment: - All-electric machine: high-speed, energy-efficient, and very quiet - Euromap 67 - Robot interface - Air valve x1 - Hydraulic core pull x1 - Control with 12 hot runner zones - Injection unit with wear-resistant, corrosion-resistant materials - Central lubrication - Automatic mould height adjustment - The machine was serviced in Germany - Wittmann W818 robot Year of manufacture: 2012 - 4-axis robot: 3 axes electrically driven by servo motors; A and C movement - Axis travel (mm): X-420, Y-800, Z-1500 - Touch control panel - Robot complete with adapter, conveyor belt, and safety enclosure - Purchase of robot and conveyor belt possible at extra cost Dimensions: Weight: 4300 kg LxWxH: 4.91 x 1.42 x 2.10 m Iedexzzvmspfx Ab Ioa All machines offered are started up by our service engineers prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: baik (bekas), Tahun pembuatan: 1997, Tangki pendingin Battenfeld ini tersedia di gudang mesin Plastima Used Machinery. Tangki vakum berasal dari tahun 1994 dan dalam kondisi sangat baik. Merek: Battenfeld Extrusionstechnik GmbH Model: V125VA Iedpfjxu E T Asx Ab Ija Tahun pembuatan: 1997 Diameter luar pipa maks.: 125 mm Panjang pendinginan: 6000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, gaya penjepit: 5.000 kN, diameter sekrup: 85 mm, volume langkah: 2.128 cm³, tekanan injeksi: 1.574 batang, berat injeksi: 1.937 g, tinggi cetakan (min.): 450 mm, Mesin Injeksi Battenfeld HM 500/3400 Gaya penutupan: 500 t Tahun produksi: 2007 Berat injeksi: 1937 g Unit injeksi .../3400 Diameter screw: 85 mm Tekanan injeksi spesifik: 1574 bar Volume injeksi: 2128 ccm Berat injeksi: 1937 g Rasio L/D screw: 22 Unit penutupan cetakan 500/... Gaya penutupan: 500 t Ukuran pelat cetakan: 1590 x 1470 mm Jarak antar tie-bar: 1000 x 800 mm Tinggi cetakan: 450 mm Jarak pembukaan: 1150 mm Jarak maksimum antar pelat: 1600 mm Langkah ejector: 250 mm Data umum: Berat: 25.000 kg Dimensi [p x l x t] [m]: 7,3 x 2,5 x 2,6 Perlengkapan: Isdpfx Aboxywcte Iea - 1 x katup pneumatik - 2 x inti hidraulik - konektor euromap 67 - unit injeksi bimetalik

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Battenfeld HM1300/350 Tahun pembuatan 2003 Gaya penjepit 130 ton Sekrup 40 mm Jam operasi 77.890 jam Jarak antar tiang 42x42 cm Iedpfx Aboxwmx Se Isa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, pl-hu-01 Iedexyqxuepfx Ab Iea

Kondisi: bekas, Battenfeld plasticizing screw Ø 18 mm - as new condition - Removed from Battenfeld VM75/60/60 R1040 - Taken from a running machine - Fully functional Intake: 17.80 mm Iedpsu Tv A Djfx Ab Iea Middle: 17.80 mm Outlet: 17.80 mm Displacement: 22.9 cm³ Injection pressure: 2593 bar Manufacturer: Battenfeld Type: Ø 18 mm Spare part no.: 100TM842 Condition: as new

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Battenfeld BA 1300V/315 V-R / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 1997 Isdpsxzzvgsfx Ab Ioa Injection unit: Screw diameter: 40 mm Shot weight: 182.9 g Injection pressure: 1,575 bar Dosing volume: 201 cc Clamping unit: Clamping force: 130 t Tie bar spacing: 454 x 740 mm Platen size: 815 x 1,010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Rotary table: 1,250 mm Vertical injection unit – screw diameter fi 35 mm Dimensions: Weight: 7,500 kg Length/Width/Height: 3.83 x 2.33 x 4.16 m Drive: Pump/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: on request

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 26.033 h, gaya penjepit: 4.000 kN, diameter sekrup: 75 mm, jarak antara tiang: 710 mm, volume langkah: 1.657 cm³, tekanan injeksi: 2.022 batang, 503220 Iodpfx Abexrc R Hs Ija

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Battenfeld TM500/5100 Unilog B6P (2016) Gaya Penutupan: 500 t Diameter sekrup: 95 mm Volume tembakan: 3012 cm3 Tipe: Horizontal Penggerak: Hidrolik Isdpfxewzlxbo Ab Ija Material yang digunakan: PC, ABS 1 inti hidrolik EUROMAP 67: Ya Mesin hidrolik

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, pl-hu-01 Isdpfsxyqw Rjx Ab Ioa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2,743 bar Dosage volume: 193 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high speed, energy-efficient and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1,500 mm Rotary table driven by servomotor, controlled via inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request. Iodexzzu Nepfx Ab Ioa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, wtryskarka-battenfeld-hu Ijdpfjxyqwwex Ab Ija

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2006 Injection unit: Screw diameter: 55 mm Shot weight: 594 g Injection pressure: 2041 bar Dosage volume: 653 ccm Clamping unit: Clamping force: 270 t Tie bar spacing: 710x710 mm Platen size: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel-arranged horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units – bimetallic Proportional valves on injection units – precise injection Parallel movements Injection unit 1000H Screw diameter: 50 mm Ijdpfx Abjxzzuvs Isa Shot weight: 446.8 g Injection pressure: 2016 bar Dosage volume: 491 ccm Dimensions: Weight: 15,000 kg Length/Width/Height: 6.90x1.78x2.34 m All offered machines are started and tested by our service technicians before sale. It is possible to receive a video of the technical inspections of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Injection Moulding Machine Battenfeld TM Xpress 350/2250 Control System: B6P Year of Manufacture: 2014 Operating Hours: 47,000 We offer a Battenfeld TM Xpress 350/2250 injection moulding machine in very good technical condition. The machine has undergone regular maintenance, is fully operational and ready for immediate use. Technical Specifications Clamping Unit - Clamping force: 3,500 kN - Platen dimensions (H × W): 1,030 × 1,140 mm - Tie bar spacing (H × W): 710 × 710 mm - Min./max. mould height: 300 – 710 mm - Maximum opening stroke: 1,380 mm - Centring ring diameter: 160 mm - Ejector stroke: 200 mm Injection Unit - Screw diameter: 65 mm Ijdpfx Aoxyqr Iob Iea - Injection volume: 1,171 cm³ - Shot weight (PS): 1,078 g - Injection pressure: 2,070 bar - Maximum injection speed: 600 mm/s Additional Equipment - Pneumatic valves – 4 pcs - Core pull – 1 pc The machine is available for immediate inspection. It is possible to start up the machine under power, carry out tests, and provide additional photos and video footage upon request. We offer assistance with loading and organising transport.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Battenfeld HM 300/2250S with Wittmann W818 Robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of manufacture: 2007 Injection unit: Screw diameter: 55 mm Shot weight: 702.5 g Injection pressure: 2500 bar Dosing volume: 772 cm³ Clamping unit: Clamping force: 300 t Tie bar spacing: 710x630 mm Platen size: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Ijdpfx Aoxzztxeb Ioa Control system: UNILOG B6 - Touch Panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 1 Hot runner control x 8 Injection unit is wear-resistant and corrosion-proof Proportional valve on the injection unit – precise injection The machine is fitted with a new original screw and cylinder Wittmann W818 Robot 4-axis, high-speed robot: 3 axes are driven by servo motors (electric); movement A and C Touch control panel Robot with adapter, safety enclosure Dimensions: Weight: 13,000 kg Length/Width/Height: 6.90x1.90x2.40 m Drive: Pump/Motor: 45 kW Heating capacity: 22.7 kW Total power: 67.7 kW All offered machines are started and tested by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Battenfeld TM Xpress 350/2250 Injection Moulding Machine Control System: B6P Year of Manufacture: 2014 Operating Hours: 49,462 We are offering a Battenfeld TM Xpress 350/2250 injection moulding machine in very good technical condition. The machine has been regularly serviced and maintained; the toggle system has undergone a complete overhaul. Fully operational and ready for immediate use. Ijdpfxexyqrus Ab Isa Technical Specifications Clamping Unit Clamping force: 3,500 kN Platen dimensions (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Minimum/maximum mould height: 300–710 mm Maximum opening stroke: 1,380 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Screw diameter: 65 mm Injection volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Maximum injection speed: 600 mm/s Additional Equipment Pneumatic valves – 4 units Core pulls – 2 units Toggle system fully overhauled The machine is available for inspection. On request, it is possible to power up the machine, perform testing, and provide photos and video footage. We also offer loading and transportation arrangements.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Battenfeld EcoPower SE 300/1330 / Electric Injection Moulding Machine Year of manufacture: 2012 Injection Unit: Isdpfx Aexzztreb Ioa Screw diameter: 50 mm Shot weight: 491.4 g Injection pressure: 2470 bar Dosage volume: 540 ccm Clamping Unit: Clamping force: 300 t Tie bar distance: 770x720 mm Platen size: 1090x1170 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B6 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving, and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valves x 8 Control system with hot runner zones x6 Injection unit hardened – bimetallic Parallel movements Option to change screw diameter to 45, 55, or 65 mm Dimensions: Weight: 14,100 kg Length/Width/Height: 7.20 x 2.04 x 2.20 m All machines offered are started up and checked by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, battenfeld-hm-270-1330-injection-moulding-machine Iedpfx Absxyqq Ds Iea