Beli Mesin pres pelurus & mesin pres tekuk bekas (55)

Kondisi: sangat baik (bekas), Data teknis: Kedoxgbllepfx Agljwt Gaya tekan: 500 ton Jarak antara kolom: 4300 mm Dimensi (P x L x T): sekitar 5100 x 900 x 4300 / 5600 mm untuk transportasi (dua bagian): Dimensi: 2 x 5.100 x 900 x 3.050 mm Berat: 1x 15.700 kg – 1x 13.200 kg (total 28.900 kg) Penjual tidak bertanggung jawab atas kesalahan penulisan atau transmisi data. Mesin dijual dalam kondisi visual, teknis, dan keausan sesuai usianya; mesin bekas dijual tanpa jaminan apapun.

Kondisi: baru, Tahun pembuatan: 2025, Electro-hydraulic press OMCN 100 Ton Mod. 164/R Made in Italy DOUBLE-SPEED ELECTRO-HYDRAULIC PRESS AUTOMATIC, COMPLETE WITH PRESSURE GAUGE Hydraulic press with fast motor, equipped with a pressure gauge and double-speed hydraulic unit, featuring a vane pump for rapid approach and retraction and an axial piston pump for the working phase. Fitted with a pressure adjustment valve and a three-position control distributor (advance – neutral – return). The machine is supplied with oil. Equipped with a winch for raising the work table. The ram is made of special treated and chromed steel. Kodofh R Nyspfx Aglswt The machine is equipped with two-hand control and simultaneous operation in accordance with current regulations. Complete with protective panels at the rear and sides. CE certified with full electromagnetic compatibility. Piston stroke: 310 mm Clearance: 1,010 mm

Tahun pembuatan: 1991, Kondisi: baik (bekas), Hydraulic horizontal straightening and bending press Maximum pressing force: 160 t Manufacturer: MAE, Model: HY RI 160 RH, Year of manufacture: 1991. Kedpfx Agscffzaoljwt For further technical data, see data sheets.

Tahun pembuatan: 1960, Kondisi: bekas, R.A.S. rotary mandrel press Model 200-20 Kedpfeic Rn Uox Aglowt Machine No. 117/6 Stroke 200 mm Pressing force 20 t Spindle diameter 60 mm

Kondisi: baru, nomor mesin/kendaraan: DF0178, Pressure: 500 t Table length: 3,500 mm Table width: 3,500 mm Maximum stroke: 3,600 mm Ksdpofxyh Ujfx Aglowt Dimensions (L x W x H): 8,500 x 3,700 x 8,500 mm Return force: 50 t Weight: 250 t Upper tool foldable: 180 degrees Table swivel speed: max. 33 mm/sec Table extendable: 3,800 mm Movable table speed: 33 mm/sec Maximum table load: 100 t Drive power: 65 kW Voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Adjustable working speed: 0 - 10 mm/sec Feed speed: 0 - 10 mm/sec Return speed: 0 - 25 mm/sec Rapid traverse speed: 0 - 10 mm/sec Oil tank: 800 l Ram height: 1,300 mm Table height: 700 mm Hydraulic system and tank located on top of the press: included? Peripheral maintenance platform: included? Side cladding: included? Siemens S7 1500: included?

Kondisi: baru, Tahun pembuatan: 2019, Pressure: 275 t Distance between uprights: 3,000 mm Total power requirement: 30 kW Approx. machine weight: 40 t Retracting force: 27 t Max. pump capacity: Axial pump with proportional valve Bridge travel: 6,000 mm Lateral cylinder travel range: max. 3,000 mm Table size: 6,000 x 3,000 mm Table height above floor approx.: 700 mm Max. distance from table to ram: 1,100 mm Oil tank: 450 l Bridge traverse speed (X and Y): 30-33 mm/sec Cylinder lowering speed: 2-10 mm/sec Cylinder stroke speed: 2-50 mm/sec Kwsdpfx Agofxyigslot Cylinder stroke: 900 mm Cylinder diameter: 440 mm Ram extension: 200 / 200 mm / Ø Cylinder traversed by servomotor via rack and pinion: 40 mm Control system: Siemens S7 1200 Monitor: Siemens 9", Touch Panel Control console: portable

Kondisi: baru, nomor mesin/kendaraan: DF0177, Pressing force: 315 t Table length: 2500 mm Table width: 1800 mm Maximum stroke: 800 mm Dimensions (L x W x H): 3910 x 4905 x 4169 mm Weight: 36 t Column diameter: 220 mm Drive power: 25 kW Adjustable working speed: 1 - 10 mm/sec Return speed: 1 - 25 mm/sec Oil tank: 450 l Hydraulics and tank on top of the press: not included Maintenance platform around hydraulics: not included Side paneling: not included Light barriers front and rear: not included Siemens S7 1200: included Siemens S7 1500: not included Kwedpfxofxyhis Aglot Rear double doors with monitoring: not included Right side door with monitoring: not included Left side door with monitoring: not included

Kondisi: baru, Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0230, Pressure: 200 t Column gap: 1,550 mm Stroke: 400 mm Dimensions (L x W x H): approx. 4,400 x 3,250 x 4,100 mm Table size: 1,500 x 1,500 mm Distance table to bottom edge of ram: 1,590 mm Return force: 20 t Total power requirement: 20 kW Oil cooling (electric), max.: 1.5 kW Stroke speed: 25 mm/sec Descent speed: 10 mm/sec Oil tank: 250 l Ksdpfx Agsfxyklelewt Table plate thickness: 120 mm Table cut-outs, with spacer rings: 550, 450, 350, and 200 mm Table speed: 30 mm/sec

Kondisi: baru, Tahun pembuatan: 2019, Pressure: 400 t Upright width: 2500 mm Stroke: 600 mm Table size: 2500 x 2000 mm Distance table to bottom edge of ram: 600 mm Total power requirement: 18 kW Approach speed: 9 mm/sec Return speed: 19 mm/sec Pump capacity: 67 l/min Kwedpfxod Ttydo Aglst Total weight approx.: 26 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, de2hu_it_lt_lv_nb_nl_pl_2024-06-28_1 Kwsdpfxjxylqle Aglet

Kondisi: bekas, BRACKER RN 280 Radialnietmaschine HERSTELLER: BRACKER, HERGESTELLT IN DER SCHWEIZ MODELL: RN 280 KAPAZITÄT NIETDURCHMESSER (BEI ZUGFESTIGKEIT 370N/MM²): 1,0 mm – 12,0 mm BETRIEBSDRUCK: 14 - 88 PSI MAX. NIETDRUCK: 340 KG NIETZEIT: 0,1 – 5,9 SEKUNDEN ARBEITSHUB: 5,0 mm – 40,0 mm ANTRIEBSMOTOR: 0,74 PS ANSCHLUSSSPANNUNG: 220V, 3 PHASEN MASCHINENGEWICHT: 340 KG MASCHINENABMESSUNGEN (L x B x H): 1220 x 915 x 1930 mm AUSSTATTUNG: Kedpfowh N H Nex Aglewt - BRACKER Fußpedal-Auslösung - Manuelle Höhenverstellung des Radialnietkopfes auf doppelführenden Rechteckführungen - Druckeinstellung mit Manometer

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, nomor mesin/kendaraan: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t Space requirement approx.: 8800 x 1800 x 2200 mm Pressure adjustment via rotary dial, infinitely variable: 15-150 t Cylinder diameter: 100 mm Pressing speed (infinitely adjustable via joystick): 0-9.9 mm/s Servo motor: 2 kW Cooling unit: 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two hydraulic cylinders. The straightening machine is prepared for the respective material type by using interchangeable rounded spacer elements. The 10 inserts are changed manually by simply sliding them into the retaining grooves. A basic set for one profile is included in the scope of delivery. The program for the relevant profile is then selected on the monitor. The monitor displays the ideal line and an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a support, and securely clamped with a quick-clamping device. Both the support and the quick-clamping device are quickly adjustable and mounted on a clamping plate. This clamping plate travels on a linear guide from left to right and vice versa. Transportation is via a chain drive powered by a servo motor. Movement is initiated via a joystick at the control panel. Once the profile is clamped, the operator moves the clamping plate into the press using the joystick. The travel speed is up to 100 mm per second, but can be infinitely reduced to 10 mm per second. For this, it is sufficient to gently release the control lever. A high-resolution camera now shows the profile in the press. The operator can clearly see any deviations from the ideal line. Depending on requirements, the operator presses or pulls the profile until the desired accuracy is achieved. Subsequently, the operator continues slowly through the press while monitoring on the screen in detail whether the profile is now straight. If necessary, the operator can move forwards or backwards to make further adjustments. Once straightened, the profile exits the press to the right and can be removed. The clamping plate can then be returned to the loading position on the left or loaded from the right to save time. Operation of the press is only permitted under the following conditions: Permitted ambient temperature: 5-60 °C Permitted relative humidity: at 20°C – 90%, at 40°C – 50% Height of installation location above sea level: +1000 m Kwodpjfxygwsfx Agljt Permissible mains voltage fluctuations: +/- 10%

Kondisi: baru, Tahun pembuatan: 2025, Hydraulic horizontal straightening and bending press - Manufacturer: ZOPF - Model: T 800 - Pressing force: 80 tons - Equipped with semi-automatic control Control system (99 programs, each with up to 16 steps) Includes bending mandrel (without punch) Includes tool adapter for dies and foot pedal - Continuously adjustable stroke setting: 0–300 mm Kwjdpfx Agsd A Nc Dolst - Adjustable working speed Maximum working stroke: 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 7.5 kW - 400 Volt, 50 Hz, 3-phase - Working height: 940 mm - Closed table - Interchangeable wear plate - Weight: 2,100 kg - Bending capacities: Flat material: 300 x 32 mm with Vmax Round tube: 3/8" – 3"

Tahun pembuatan: 2023, Kondisi: baru, de-1 Kwedpfxsgyta Ho Aglet

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 201805015, panjang kerja: 4.100 mm, panjang pemakanan sumbu X: 600 mm, panjang umpan sumbu Y: 300 mm, lebar total: 1.550 mm, panjang total: 3.560 mm, tinggi total: 2.850 mm, gaya penekanan: 185 t, berat keseluruhan: 18.000 kg, kebutuhan tinggi: 3.440 mm, panjang meja: 4.100 mm, tinggi pemasangan: 500 mm, Used press brake, lightly operated and in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear stops, No. 2 retractable pneumatic supports ESA 660W CNC LAG press brakes represent the perfect synthesis of Italian technological innovation, meticulous attention to details and design, combined with high Chinese production capacity. These core values, together with the finest European components, enable LAG to offer its customers press brakes, shears, and inserting machines featuring the best price/performance ratio on the market. Top-of-the-range model equipped with accessories and automation for high profitability performance. Main standard configuration of the G-TOP press brake: G-FLEX Crowning compensation system G-CS Active crowning system 6 axes (Y1-Y2-X-R-Z1-Z2) Kodpfxowync He Aglowt Double pump: a main power pump to operate the machine, and a second pump for crowning management DSP AP Safety system Touch screen control panel on the electrical cabinet Sliding front supports Touch screen CNC control 4-axis back gauge system mod. GRP-4 (X-R-Z1-Z2)

Kondisi: baru, Pressing force 500 t Clearance between uprights 600 mm Stroke 600 mm Table area 3500 x 1500 mm Distance from cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision milled with a CNC milling machine - Chrome-plated cylinder - Working plate with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold block according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged Kodpfxsfv Awhj Aglowt - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement by remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety cable with switch all around the press 4. TRANSPORT AND INSTALLATION – Price includes transport, installation and training at the customer’s plant. – Hydraulic oil is not included in the price. – All handling costs (e.g. crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine comes with a 2-year manufacturer’s warranty. – This warranty includes the supply of all spare parts required for repair and servicing the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged by improper use.

Kondisi: baru, Pressure 300 t Working speed 3–8 mm/sec Stroke 500 mm Return speed 15 mm/sec Table size 3000 x 1500 mm Tank capacity 45 l Travel x / y 2600 x 1000 mm Passage 500 mm Total power requirement 18.5 kW Machine weight approx. 18 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are machined precisely on a CNC milling machine Kwjdpfevxw Hmex Aglst - Chromed cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydrapack or Badeston hydraulic valve - Hydraulic manifold block according to EN standards - Hydraulic oil tank (xxx liters) - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z axis movement by remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive and EN ISO 16092-01, 16092-03 - Two-hand control buttons - Reset and emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION - The price includes transport costs, installation, and training at the customer’s site. - Hydraulic oil is not included in the price. - All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer’s warranty. - This warranty covers the supply of all spare parts required for repair and service calls for the machine. Damaged parts are to be returned to the manufacturer after replacement with new parts. - This warranty does not cover parts damaged due to improper use.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 700 mm, gaya penekanan: 16 t, tinggi kerja: 1.050 mm, tinggi pusat: 1.050 mm, Mesin perata otomatis, telah diperbarui secara mekanis, dilengkapi kontrol baru SIMATIC S7-1500, Drive Controller CPU 1504D TF. Jarak puncak maksimum 500 mm, gaya perata 16 ton, langkah perata 20 mm, langkah bebas 95 mm, tinggi kerja 1050 mm, konsumsi daya 10 kVA, konsumsi rata-rata 1,3 kW. Opsi: Mesin dapat dilengkapi dengan konveyor balok angkat (melalui mesin) serta sabuk pemasukan/pengeluaran sesuai permintaan pelanggan, juga dengan pagar pengaman. Saat ini mesin dilengkapi dengan 1 area perata, perluasan dimungkinkan. Kwsdpfx Agsxldiqelot

Kondisi: diremajakan ulang (bekas), PORTAL-RICHTPRESSE DRUCKKRAFT: 450 t HUB: 50 mm LICHTE WEITE: 1.000 mm Kwodpfefcnu Iex Agljt ARBEITSBEREICH: LÄNGE: 5.200 mm BREITE: 2.300 mm HÖHE: 1.000 mm GEWICHT: 45.000 kg SCHRAUBENABSTAND LINKS-RECHTS: 1.000 mm

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force: 3 t Reach: 0 mm Stroke: 200 mm Total power requirement: 15 kW Machine weight approx.: 4 t Kwsdpfx Agot Hw Ameljt Space requirement approx.: m JENNY – Switzerland, automatic double-column straightening press Type RZ-205/3-600, Year of manufacture 1990, Serial no. 86 596 Upper ram pressing force 3 t Ram stroke approx. 200 mm Maximum installation height: 500 mm Maximum clamping length of workpiece: 600 mm Height of center above table approx.: 210 mm Ram speed up: 0.17 mm/sec Ram speed down: 0.02 – 0.17 mm/sec Pump drive: 15 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special equipment: Machine without automatic workpiece feed, the parts (shaft-shaped) are inserted manually, in front of the working area there is a Plexiglas sliding cover, manually operated Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but connection options for up to 7 measuring points. These are longitudinally adjustable on the lower press table over a range of approx. 500 mm, the straightening punch is adjustable on the upper ram in a prism guide 2 tailstocks adjustable on the press table up to a maximum clamping length of 600 mm, left side motor-driven with clamping quill, right side with indexing disc Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right, for supporting the workpiece The workpiece is measured at predetermined points and straightened accordingly, the straightening process is monitored and controlled with the measuring device Straightening stroke control for preset ram stroke Left tailstock motorized Original JENNY cycle control (FMS) in separate control cabinet with monitor and keyboard, parameter input,

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Total power requirement: 10 kW Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Kwodpjt Hwwdofx Aglet Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.

Kondisi: sangat baik (bekas), Pressure 6.3 t Reach 200 mm Stroke 200 mm Maximum installation height 500 mm Table clamping surface 450 x 420 mm Machine weight approx. 1.5 t Ksdpfx Agjwuu A Aslowt Space requirement approx. 1.2 x 0.6 x 2.0 m Two-hand control, various attachments

Kondisi: baik (bekas), TABLE PRESS WITH POWER UNIT Kjdpfx Agok Adfneljwt

Kondisi: baik (bekas), Manufacturer: Ursviken Model: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Hydraulic press for fabrication of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with a Siemens SIMATIC panel and Rittal electric cabinet. Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table and ram in X-direction Large die tooling set, radii: 10/20/30/50/60/80/100 mm Pressing force: 210 kg/cm² Ksdpokvmi Ssfx Aglowt Maximum stroke: 800 mm Machine placed 2,350 mm below ground level Specifications Metric US Standard Capacity: 1,000 tons Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (estimated) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: siap digunakan (bekas), Maximum forming capacity at full length: 9 gauge (mild steel), equivalent to approx. 3.8 mm, max. forming length: 3200 mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88 mm/s, bending speed: 1879.6 mm/s, bending angle range: 0°–180°. Dimensions X/Y/Z: approx. 5160 mm / 2220 mm / 1780 mm, weight: approx. 5300 kg. Kwedpfxstia Hhs Aglot