Beli mesin stamping otomatis bekas (170)

Kondisi: baik (bekas), Tahun pembuatan: 1986, jam operasional: 10.000 h, Press force: 30 tons (approx. 270 kN) Table size: 762 x 533 mm = 30" x 21" Ram area: 800 x 300 mm Strokes per minute: 100...1400 1/min Stroke (fixed): 25.4 mm = 1" Ram reinforcement: 44.5 mm = 1.75" Features: * Hydraulic clutch * Roller feed Brand: Sankyo Type: Variax V70 Nedpfx Ajnl Snol Tslh Strip width: max. 100 mm Only approx. 10,000 operating hours

Kondisi: bekas, Tahun pembuatan: 1987, Offer We can offer you, subject to prior sale and errors excepted, as available from stock, the following non-binding offer: SCHAAL High-Speed Punch Press Type: SEP 40 Year of manufacture: 1987 — Press force (nominal): 40 tons Stroke rate (min.–max.): 100–500 strokes/min Njdpfxsvu E Iwo Al Tolh Adjustable stroke length: 8–70 mm Ram adjustment: 70 mm Table size: 550 x 580 mm Ram surface (upper): approx. 300 x 340 mm Shut height: 255 mm Front opening for tool change: approx. 560 mm Adjustable strip feed height: 120 mm Max. strip width / side clearance (left): 260 / 260 mm Main drive: approx. 7.5 kW Total power requirement: approx. 10 kW - 380 V – 50 Hz Weight: approx. 4,000 kg Accessories / Special Equipment: • Band Clamping Feed Device, left side mounted, Type SZV 2, with adjustable stroke, height adjustable • SANDER & EBERT horizontal decoiler, tension-controlled • Continuous stroke and single stroke selectable, as well as jog mode, piece counter, air blow-off unit • Separate free-standing control and electrical cabinets, vibration dampers • Large, complex soundproof enclosure (disassembled) Condition: Very good condition! Previously used for precision electronic connectors, regularly maintained! A video of the machine will be available here shortly. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further mechanical and hydraulic presses and other machine tools in stock – please check our inventory on our website: geiger-

Kondisi: baik (bekas), Tahun pembuatan: 1990, jam operasional: 39.687 h, Fungsionalitas: berfungsi sepenuhnya, Bruderer BSTA 200 High-speed stamping press. Maximum punching force: 200 kN / 20 t Speed range: 100 – 600 spm Year of manufacture: 1990. Feed unit BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Nljdpfxotraado Al Tsh Clamping plate dimensions: 510 x 400 mm Bed opening: 400 x 160 mm Maximum tool width between uprights: 410 mm. Connected load: 36 kVA Power supply: 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Control cabinet and controller included. Complete with all original technical documentation. Other high-speed presses in stock: Mabu, Schaal, Bihler, and other Bruderer models.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, SCHAAL SEP 80 (Machine No. 00-1564, Year of Manufacture 2000 by A. Schaal GmbH & Co., Salach/Württemberg, Germany) adalah press eksentrik presisi untuk aplikasi stamping menuntut dengan volume produksi tinggi. Dibangun di atas rangka cor dua tiang berbentuk-O dengan redaman getaran, mesin ini menawarkan tingkat kekakuan dan presisi dimensi yang dibutuhkan untuk fine blanking, progressive die stamping, dan toleransi ketat selama produksi seri—sangat cocok ketika kualitas komponen harus konsisten sepanjang shift produksi. Mesin ini dilengkapi dengan SCHAAL SWV 3E roller feeder yang cocok dan siap dioperasikan sejak awal sebagai lini stamping otomatis berbasis coil: Njdpfozab Ibjx Al Tslh Panjang feeding: 0–9.999,9 mm (program bebas) Lebar coil: hingga 320 mm Tebal coil: 0–4 mm Tersedia juga berbagai mesin bekas lainnya dari Mabu, Bruderer, Bihler, dan Schaal di stok kami. Pabrikan: A. Schaal GmbH & Co. Werkzeug- und Maschinenbau Tipe: SEP 80 Tahun Pembuatan: 2000 Nomor Mesin: 00-1564 Tanda CE: Ya Kapasitas Tekanan: 800 kN Stroke Adjustable: 8–80 mm Jarak meja – ram (maks., ram bawah, dengan plat penjepit): 310 / 355 mm Penyesuaian ram: 80 mm Ukuran ram: 500 × 400 mm Lubang ram: Ø 50 × 90 mm Keyway ram: 30 H7 mm Ukuran meja: 830 × 700 mm Tebal plat penjepit: 80 mm Lubang tembus pada meja: 500 × 200 mm Tinggi lewat coil di atas meja (dengan plat penjepit): 120 mm ± 40 mm Total daya terpasang: 26 kW Tegangan suplai: 3 × 400 V, 50 Hz Arus nominal: 40 A Sekering utama: 50 A Berat: 8.000 kg Feeder SCHAAL SWV 3E Roller Feeder Panjang Feeding: 0–9.999,9 mm (program bebas) Lebar Coil: hingga 320 mm Tebal Coil: 0–4 mm

Kondisi: bekas, Tahun pembuatan: 1987, nomor mesin/kendaraan: 87 / 906, Pressure: 63 t Stroke: 8 - 80 mm Stroke rate: 60 - 300 strokes/min Distance between uprights: 720 mm Table area: 710 x 700 mm Pass-through opening in table: 345 x 100 mm Lateral frame passage: 320 x 200 mm Ram area: 500 x 400 mm Ram adjustment: 80 mm Throat depth: 350 mm Installation height: 250 / 275 mm Feed length: 220 mm Nlodpfx Aljcxxpco Tsh Table height above floor: 1000 mm Total power requirement: 9.2 kW Approx. machine weight: 6.5 t Equipped with SZV 3-S gripper feed, designed for a strip width of 270 mm, stepless speed adjustment, separate control cabinet, safety emergency stop, selector switch for setup, single stroke, and continuous operation, adjustable stroke.

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 131 542, Pressing force: 40 t Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 290 mm Distance between uprights L-R: 600 mm Distance between uprights (side): 190 mm Table clamping area approx.: 600 x 500 mm Ram clamping area approx.: 600 x 400 mm Through-hole in table: 500 x 110 mm Strokes per minute: 65 - 400 min⁻¹ Table height above floor: 1100 mm Power requirement: 32 kW Height above floor approx.: 2,800 mm Machine weight approx.: 6.2 t Nsdpfsuqc Ezsx Al Tjlh Additional equipment In 2002, the machine was retrofitted with a roller feed Model MWVL-200, year of manufacture 2002

Kondisi: bekas, Tahun pembuatan: 1981, nomor mesin/kendaraan: 104680, Pressing force: 45 t Adjustable ram stroke: 10 - 40 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 220 - 300 mm Distance between uprights L-R: 560 mm Table clamping area approx.: 550 x 450 mm Ram clamping area approx.: 550 x 360 mm Pass-through opening in table: 450 x 100 mm Njdpfx Asuqcwdjl Tslh Strokes per minute: 100 - 500 min-1 Power requirement: 7.5 kW Machine weight approx.: 6.2 t

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 105981, Pressing force: 45 t Adjustable ram stroke: 20 - 80 mm Nsdpfxsuqc Ngo Al Tjlh Ram adjustment: 50 mm Die height (bottom stroke, top adjustment): 300 mm Clearance between uprights L-R: 710 mm Table clamping area approx.: 700 x 450 mm Ram clamping area approx.: 700 x 360 mm Pass-through opening in table: 600 x 100 mm Strokes per minute: 80 - 400 min-1 Power requirement: 10 kW Height above floor approx.: 2900 mm Machine weight approx.: 7.2 t Control system: Siemens S7 Standard equipment: With gripper feed Machine was completely overhauled in 2001 with SIEMENS S7 control.

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), BSTA 60 HL, with BBV 202/120 Njdpjizkmtofx Al Tolh CE certification possible Contact us!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 41.000 h, Fungsionalitas: berfungsi sepenuhnya, FOR SALE: BRUDERER BSTA 50USL High-Performance Punching Press With Automatic Feeder BBV 190 500 kN | 100–1120 strokes/min | Fully automatic | Swiss premium quality Technical Highlights: Rated force: 500 kN Strokes per minute: 100–1120 Operating hours: 41,000 h Main drive: 22 kW Control voltage: 24V DC Power supply: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment: 64 mm Working Areas: Max. tool mounting width: 1100 mm Strip feed width: up to 256 mm Ram area: 980 × 420 mm Nlodpfx Alewpg Rbe Toh Table area: 1080 × 650 mm Adjustable strip entry height: 60–140 mm Max. strip width: 120 mm Max. feed length: 85 mm Max. material thickness: 4 mm Feed angle: 180° Machine Dimensions (incl. BBV 190): Installation dimensions (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment: BBV 190 Feeding System – fully synchronized mechanical strip feed system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and ram height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration into peripheral systems Condition & Delivery: Machine in excellent technical and optical condition Fully serviced and tested Immediately available from Europe Worldwide shipping and installation support possible Contact us today for pricing and further technical details. We are happy to help you modernize your production line with Swiss precision.

Tahun pembuatan: 1986, Kondisi: bekas, Pressing force 15 t Installation height - mm Strokes per minute 200 - 2000 Table surface - mm Ram surface 490 x 200 mm Sheet width 5 - 50 mm Nljdsfn Apxjpfx Al Tsh Stroke adjustment 10-30 mm Weight 3 t Dimensions 1370 x 1200 x 2200 mm Drive 10 kW Table through-hole 350 x 100 mm Table width 530 / 210 mm Table length 530 / 350 mm Only in operation for 2 years High-speed model

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5255, Press force: 30 t Strokes per minute: 100-600 spm Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left-hand side Njdpfx Alocxxu Ne Telh Adjustable stroke: 16-40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, equipped with air cooler, stroke counter, separate control cabinet, pneumatic clutch, left-hand BRUDERER precision double-roll feeder.

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 9802, Press force: 80 t Strokes per minute: 100 - 1000 spm Stroke length: 16-63 mm Table size: 970 x 920 mm Nsdpfoh Ra N Rjx Al Tjlh Pass-through opening in table: 740 x 100 mm Ram surface: 760 x 510 mm Distance table/ram: 280 mm Compressed air: 6 - 10 bar Total connected load: 43 kW Machine weight approx.: 15.5 t Space requirement approx.: 232 x 125 x 326 cm Machine in very good condition, has not been in operation for about 6 years due to plant closure. Equipped with KYORI GX 80 feeder, 4 anti-vibration feet, separate control cabinet, additional oil cooling unit; cooling unit.

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Nedshlnzkjpfx Al Tslh

Kondisi: bekas, nomor mesin/kendaraan: 4131, Order no. Lg 34422 High-performance punching press BRUDERER BSTA 60 H from ongoing production. Stroke adjustment requires repair. Without soundproof enclosure and without coil feed line. Feed unit BBV 202/120 Nsdpeinzdlofx Al Tslh

Kondisi: baik (bekas), Tahun pembuatan: 1984, Pressing force: 800 kN Stroke rate: 30 - 200 strokes/min, adjustable via PIV gearbox Stroke, adjustable: 20 - 100 mm Shut height: 500 mm (at largest stroke, slide up) Ram bolster: 75 mm Table area: 1,010 x 800 mm Pass-through opening: 700 x 150 mm Ram area: 860 x 700 mm Drive power: 22 kW Features: - 2 connecting rods - 8-point ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Electropneumatic stroke adjustment Including complete coil line, make ALBA, consisting of: Decoiler Maximum outside diameter: 1,400 mm equipped with: • Powered decoiler carriage • Hydraulic loading saddle • Hydraulic auxiliary drive • Hydraulic coil expansion 480 - 530 mm • Hydraulic traversing unit • Hydraulic pressure roller, side adjustment via handwheel • Strip edge guide arms Straightening machine Type: Ma Ria 9 Strip width: max. 400 mm Strip thickness: 0.5 - 5.0 mm Nodpfxedhzf Is Al Tslh Number of feed rollers: 2 pcs, Ø 120 mm, upper hydraulically openable Number of straightening rollers: 9 pcs, Ø 60 mm, top rollers individually hydraulically adjustable, readings via micrometer, all rollers supported equipped with: • Hydraulic strip infeed assist, table with tongue and hold-down roller • Lateral strip guide on infeed with asymmetric adjustment • Lateral strip guide at outfeed • Outfeed roller basket • Loop control via sensors • Lateral loop guiding Roll Feed Type: Vhy 400 Strip width: max. 400 mm Strip thickness: max. 5.0 mm Height adjustment via hydraulic jack Press or coil line can also be offered separately.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet Nsdpfx Alogpxc Sj Telh

Kondisi: bekas, Tahun pembuatan: 1997, nomor mesin/kendaraan: 150069, tech-spec-2024-001 Nlodpfxouqdhwo Al Tjh

Tahun pembuatan: 1964, Kondisi: bekas, Press force 40 t Upright gap 450 mm Stroke 20–50 mm Ram adjustment 60 mm Table area 370 x 400 mm Ram area 250 x 370 mm Pass-through opening in table 120 x 280 mm Table height 850 mm Machine weight approx. 2.5 t Required space approx. WxDxH 1600 x 1300 x 2800 mm Nedpolp U Exsfx Al Tjlh PIV gearbox Mechanical overload safety device in ram Mechanical feed

Kondisi: baik (bekas), Table size: 350x350 mm Nedpsfm A Amofx Al Tjlh

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Nledpscxxycofx Al Tjh Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Kondisi: bekas, nomor mesin/kendaraan: 8483, Pressure: 30 t Strokes per minute: 100-600 spm Sheet width: 115 mm Table size: 450x450 mm Bruderer precision double roll feed: BBV 190/85 left Adjustable stroke range: 16-40 mm Column spacing (left-right): 330 mm Column spacing (front-back): 280 mm Shut height: 290 mm Entry width: 120 mm Feed length: 15-80 mm Control cabinet dimensions: 1.1 x 1.2 x 2.2 m Pass-through opening in table: 315 x 100 mm Njdpfxecxxrds Al Telh Total connected load: 5.5 kW Approx. machine weight: 3 t High-speed punching press in 3-column design, equipped with BRUDERER BBV 190-85 feeder on the left, cooling fan, swivel safety guard, pneumatic clutch, electric two-hand operation, manual roller venting on the feeder.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: HT-120T, tinggi total: 1.990 mm, lebar total: 800 mm, panjang total: 1.600 mm, gaya penekanan: 90 t, panjang langkah: 80 mm, berat keseluruhan: 1.500 kg, Tersertifikasi DGUV hingga: 09/2026, Digima HT-120T Mesin pemotong 900 kN Mesin hidrolik profesional untuk memotong, membuat takik, menekuk, dan memproses komponen baja. HT-120T adalah mesin pemotong hidrolik yang efisien, dirancang untuk penggunaan intensif di pabrik, bengkel las, pabrik konstruksi, dan bengkel yang bergerak dalam pemrosesan logam. Mesin ini memungkinkan pemotongan lubang pada lembaran logam, strip baja, pipa, dan profil, serta membuat takik pada pipa, menekuk komponen baja, memproses sudut, dan menyiapkan komponen untuk perakitan atau produksi lebih lanjut. Membuat Takik pada Pipa Mesin ini memungkinkan pembuatan takik pada pipa dan mempersiapkannya untuk penyambungan atau perakitan lebih lanjut. Memotong Lubang pada Pipa Nledpfez Arruox Al Tjh HT-120T memungkinkan pembuatan lubang pada komponen pipa dan profil baja. Menekuk Strip Baja Dengan menggunakan perkakas yang sesuai, mesin ini dapat berfungsi sebagai mesin penekuk untuk komponen datar. Menekuk Besi Siku Perangkat ini mendukung pemrosesan besi siku dan persiapan komponen struktural. Memproses Sudut dengan Radius Mesin ini memungkinkan pembentukan sudut dan menghasilkan komponen yang seragam dengan radius yang ditentukan. Memotong pada Pelat HT-120T memungkinkan pemotongan lubang bundar, lubang memanjang, dan bentuk lainnya pada pelat dan lembaran baja. Memotong pada Profil Mesin ini cocok untuk memotong pada besi siku, profil, dan komponen struktural. Membulatkan Sudut Perangkat ini memungkinkan pemrosesan sudut komponen, meningkatkan estetika, dan mempersiapkannya untuk perakitan. Membulatkan Tepi di Kedua Sisi HT-120T memungkinkan pemrosesan tepi dan pembulatan komponen di kedua sisi, tergantung pada perkakas yang digunakan. Spesifikasi Teknis: Model: HT-120T Ketebalan pemotongan maksimum: 20mm Diameter lubang pemotongan maksimum: 30mm Gaya tekan: 900kN Kedalaman tenggorokan: 350mm Langkah maksimum: 80mm Jumlah langkah: 8-20 langkah/menit Daya motor: 5,5kW Dimensi keseluruhan: 1600x800x1990mm Berat mesin: 1500kg Kode HS: 8462490000

Kondisi: bekas, Tahun pembuatan: 1971, nomor mesin/kendaraan: 1967, Pressure: 30 t Stroke rate: 100 - 600 strokes/min Adjustable stroke range: 8 - 40 mm Ram adjustment: 40 mm Feed width: 198 mm Nedpfx Ajcxxxmjl Tslh Tool installation height - min./max.: 230 - 270 mm Roller width: 110 mm Pass-through opening in table: 310 x 80 mm Column distance (left-right): 330 mm Column distance (front-rear): 280 mm Table height above floor: 990 mm Column diameter: 50 mm Voltage: 380 V Frequency: 50/60 Hz Control voltage: 24 V Table size: 475 x 450 mm Ram diameter: 190 mm Total power requirement: 0.96 - 5.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 1.2 x 1.16 x 2.15 m Precision high-speed punching press in 3-column design, with: - Optionally available with original Bruderer precision double roller feed, pull and push operation on right and left side (see photo), - Electro-hydraulic VARI drive, - Pneumatic clutch with safety valve, - Three operating modes: single stroke, single cycle, and continuous operation, - Central lubrication, - Cooling fan for consistent machine temperature, - Pressure gauge for air pressure monitoring, - Stroke counter integrated in the control panel, - Separate, lockable control cabinet, - Two-hand operation, and - Emergency stop safety feature. Newly painted, visually in good condition!

Kondisi: baik (bekas), Pressure: 25 t Cutting capacity (thickness / width): 1.25 / 140 mm Strokes per minute, min./max.: 250 spm Nledpfx Alofim Dwj Tsh Ram stroke, max.: 20 mm Table surface usable (W x D): 440 x 360 mm