Beli mesin stamping otomatis bekas (162)

Kondisi: bekas, Tahun pembuatan: 1971, nomor mesin/kendaraan: 1967, Pressure: 30 t Stroke rate: 100 - 600 strokes/min Adjustable stroke range: 8 - 40 mm Ram adjustment: 40 mm Feed width: 198 mm Tool installation height - min./max.: 230 - 270 mm Roller width: 110 mm Pass-through opening in table: 310 x 80 mm Column distance (left-right): 330 mm Column distance (front-rear): 280 mm Table height above floor: 990 mm Column diameter: 50 mm Voltage: 380 V Frequency: 50/60 Hz Control voltage: 24 V Table size: 475 x 450 mm Ram diameter: 190 mm Total power requirement: 0.96 - 5.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 1.2 x 1.16 x 2.15 m Precision high-speed punching press in 3-column design, with: - Optionally available with original Bruderer precision double roller feed, pull and push operation on right and left side (see photo), - Electro-hydraulic VARI drive, - Pneumatic clutch with safety valve, - Three operating modes: single stroke, single cycle, and continuous operation, - Central lubrication, - Cooling fan for consistent machine temperature, - Pressure gauge for air pressure monitoring, - Stroke counter integrated in the control panel, - Separate, lockable control cabinet, - Two-hand operation, and - Emergency stop safety feature. Newly painted, visually in good condition! Fgjdocxxxmspfx Agdji

Kondisi: bekas, Tahun pembuatan: 1978, Zulässige Hubzahl in Relation zum Mat.-vorschub bei 300 mm = 40-60 Hübe 150 mm= 120 Hübe Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Type AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, ohne Grube). Blechband führt über die Abrollhaspel hinweg zum einseitigen Zangenvorschubapparat und dann in die Maschine. • HEILBRONN Coilabwickelgerät Type HAEMH 4000/500 S #204753 mit Coilablage- Platz, in welchem das Coil aufgegriffen und gespannt wird und dann wieder in Zurück in Position fährt, max. Coilgewicht 4000 kg, Coil-Ø max. 1500 mm, max. Bandbreite 500 mm, • angebauter Richtapparat für maximale Blechbreite 400 mm, die Blechführung ist In der Breite verstellbar, Blechstärke verstellbar 1-3 mm • automatische Öl-Umlaufschmierung mit Überwachung, • hydr. Überlastsicherung, motorische Stößelverstellung 125 mm • Förderband für die fertigen Pressteile, separater Schaltschrank -1990 modernisiert- Admissible number of strokes in relation to material feed: 300 mm = 40–60 strokes, 150 mm = 120 strokes. Fgjdpfxet Hwz Ne Agdei Accessories/Special Equipment: • FREI / WEINGARTEN straightening unit, type AMR 04 So, with subsequent overhead loop control (space-saving, no pit required). The strip runs over the decoiler to a single-sided gripper feed unit and then into the machine. • HEILBRONN coil unwinder, type HAEMH 4000/500 S #204753, with coil storage station, where the coil is picked up, clamped, and then moved back into position. Max. coil weight 4,000 kg; max. coil diameter 1,500 mm; max. strip width 500 mm. • Integrated straightening device for max. sheet width 400 mm, adjustable sheet guide width, thickness adjustable 1–3 mm • Automatic oil circulation lubrication with monitoring • Hydraulic overload protection, motorized ram adjustment 125 mm • Conveyor belt for finished pressed parts, separate control cabinet – modernized 1990.

Tahun pembuatan: 1993, Kondisi: bekas, Press force 63 t Stroke 10–80 mm Strokes per minute 65–400 spm Ram adjustment 80 mm Table size 1030 x 550 mm Ram area 920 x 450 mm Pass-through opening in table 700 x 200 mm Installation height bottom, ram adjustment top 420 mm Machine weight approx. 10 t Double-column design Twin connecting rods IMCO press force measuring system Central lubrication Automatic stroke adjustment Motorized ram adjustment Fgjdpfjlp U E Rex Agdsi Wanzke decoiler Rotary gripper feeder

Tahun pembuatan: 1981, Kondisi: bekas, Pressure 20 t Stroke 8-38 mm Fgsdpfjlp U Nmex Agdoi Strokes per minute 100-1800 spm Table surface 400x400 mm Passage in the table 380x80 mm Table height 1000 mm Machine weight approx. 4 t Required space (LxWxH) approx. 1600x1600x3100 mm Machine number: 6068

Kondisi: baru, Tahun pembuatan: 2025, tinggi total: 3.700 mm, penyesuaian silinder hidrolik: 150 mm, tinggi pemasangan: 650 mm, tinggi meja: 854 mm, lebar total: 2.479 mm, panjang total: 4.186 mm, panjang meja: 2.000 mm, lebar meja: 1.200 mm, lebar sabuk konveyor: 350 mm, gaya penekanan: 250 t, panjang langkah: 250 mm, jarak antara dudukan samping: 920 mm, jarak antara penyangga: 2.040 mm, berat keseluruhan: 31.000 kg, tegangan kontrol: 24 V, Standardised 250-ton stamping press with fixed stroke at an attractive price. Cost-optimised basic configuration without enclosure or safety gates, designed for use within a soundproof cabin. Optional accessories available, such as safety gates/enclosure, press force measurement, die change/clamping system, etc. Fodpfxewb Dh Io Agdegi For technical specifications and details of offered accessories, please refer to the PDF documents. Delivery time: 6 months.

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5255, Press force: 30 t Fedpfxecxxu Nj Agdsgi Strokes per minute: 100-600 spm Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left-hand side Adjustable stroke: 16-40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, equipped with air cooler, stroke counter, separate control cabinet, pneumatic clutch, left-hand BRUDERER precision double-roll feeder.

Kondisi: baru, Tahun pembuatan: 2025, agri-machinery-szsz2 Fgjdoxh Swujpfx Agdei

Kondisi: diremajakan ulang (bekas), Maximum pressing force: 180 kN (18 tons). Strokes per minute: 100 to 600. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Fgjdpfefmavxox Agdei Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Required air pressure: 8 bar. More high-speed presses in stock by Bruderer (models BSTA 18, 20, 30, 200, 50), as well as Schaal and Mabu presses.

Tahun pembuatan: 1964, Kondisi: bekas, Press force 40 t Upright gap 450 mm Stroke 20–50 mm Ram adjustment 60 mm Table area 370 x 400 mm Ram area 250 x 370 mm Pass-through opening in table 120 x 280 mm Table height 850 mm Fgjdpfslp U Exsx Agdji Machine weight approx. 2.5 t Required space approx. WxDxH 1600 x 1300 x 2800 mm PIV gearbox Mechanical overload safety device in ram Mechanical feed

Kondisi: bekas, Tahun pembuatan: 1992, Tekanan 250 t Langkah 37 mm Jumlah langkah 30-240 langkah/menit Pengaturan plunger 150 mm Luas meja 1200x1000 mm Lubang keluaran di meja 500x180 mm Lubang pin di plunger Ø52 mm Total kebutuhan daya 50 kW Berat mesin sekitar 35 t Ruang yang dibutuhkan sekitar PxLxT 3700x2300x3900 mm Kombinasi kopling dan rem hidrolik Sistem pemantauan gaya penekanan IMCO Pelumasan terpusat Pengaturan langkah otomatis Pengaturan plunger hidrolik Perlindungan beban berlebih hidrolik Pengumpan Alba RF300 Fjdpfx Ageuap T Njdogi Mesin dan sistem sabuk diperbaiki secara mekanis dan elektrik!!

Kondisi: baru, Tahun pembuatan: 2025, tinggi total: 5.150 mm, penyesuaian silinder hidrolik: 200 mm, tinggi pemasangan: 750 mm, tinggi meja: 1.117 mm, lebar total: 2.600 mm, panjang total: 4.000 mm, panjang meja: 2.500 mm, lebar meja: 1.300 mm, lebar sabuk konveyor: 430 mm, gaya penekanan: 315 t, panjang langkah: 300 mm, jarak antara dudukan samping: 850 mm, jarak antara penyangga: 2.580 mm, berat keseluruhan: 54.000 kg, tegangan kontrol: 24 V, Standardized 315-ton stamping press with fixed stroke offered at an attractive price. Cost-optimized basic configuration without guarding or safety doors, intended for use inside a sound insulation booth. Optional accessories such as safety doors / guarding, pressing force measurement, tool change / clamping system, etc. available. Fgodpfx Aswc A Ebjgdsi Technical specifications: see PDF document. Delivery time: 6 months.

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 9802, Press force: 80 t Strokes per minute: 100 - 1000 spm Stroke length: 16-63 mm Fedpfxeh Ra N Rj Agdegi Table size: 970 x 920 mm Pass-through opening in table: 740 x 100 mm Ram surface: 760 x 510 mm Distance table/ram: 280 mm Compressed air: 6 - 10 bar Total connected load: 43 kW Machine weight approx.: 15.5 t Space requirement approx.: 232 x 125 x 326 cm Machine in very good condition, has not been in operation for about 6 years due to plant closure. Equipped with KYORI GX 80 feeder, 4 anti-vibration feet, separate control cabinet, additional oil cooling unit; cooling unit.

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Fsdpecxxycofx Agdegi Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Kondisi: bekas, nomor mesin/kendaraan: 8483, Pressure: 30 t Strokes per minute: 100-600 spm Sheet width: 115 mm Table size: 450x450 mm Bruderer precision double roll feed: BBV 190/85 left Adjustable stroke range: 16-40 mm Column spacing (left-right): 330 mm Column spacing (front-back): 280 mm Shut height: 290 mm Entry width: 120 mm Feed length: 15-80 mm Control cabinet dimensions: 1.1 x 1.2 x 2.2 m Pass-through opening in table: 315 x 100 mm Total connected load: 5.5 kW Approx. machine weight: 3 t Fgedpfocxxrdex Agdei High-speed punching press in 3-column design, equipped with BRUDERER BBV 190-85 feeder on the left, cooling fan, swivel safety guard, pneumatic clutch, electric two-hand operation, manual roller venting on the feeder.

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 105981, Pressing force: 45 t Adjustable ram stroke: 20 - 80 mm Ram adjustment: 50 mm Die height (bottom stroke, top adjustment): 300 mm Clearance between uprights L-R: 710 mm Table clamping area approx.: 700 x 450 mm Ram clamping area approx.: 700 x 360 mm Pass-through opening in table: 600 x 100 mm Strokes per minute: 80 - 400 min-1 Power requirement: 10 kW Height above floor approx.: 2900 mm Machine weight approx.: 7.2 t Control system: Siemens S7 Standard equipment: With gripper feed Machine was completely overhauled in 2001 with SIEMENS S7 control. Fodouqc Ngepfx Agdsgi

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Mechanical roller feeder BBV190/85 for mounting on BSTA50 Fgsdjr Hmprjpfx Agdei Left-hand mounting Driven via the main shaft/PTO shaft of the press – PTO shaft/mounting plate not included in delivery Mechanical feed length adjustment via spindle Drive shaft guard, tube type Including encoder mount

Tahun pembuatan: 1981, Kondisi: bekas, Press force: 63 t Stroke: 6–60 mm Strokes per minute: 90–550 spm Fgedpfxslp U R Io Agdei Shut height (bottom), ram adjustment (top): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Pin hole in ram: Ø 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Space requirement approx. (WxDxH): 2900 x 2000 x 3000 mm Centralized oil lubrication IMCO press force measuring device

Kondisi: bekas, Tahun pembuatan: 1981, nomor mesin/kendaraan: 104680, Pressing force: 45 t Adjustable ram stroke: 10 - 40 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 220 - 300 mm Distance between uprights L-R: 560 mm Table clamping area approx.: 550 x 450 mm Ram clamping area approx.: 550 x 360 mm Fgedeuqcwdepfx Agdei Pass-through opening in table: 450 x 100 mm Strokes per minute: 100 - 500 min-1 Power requirement: 7.5 kW Machine weight approx.: 6.2 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, jam operasional: 41.000 h, Fungsionalitas: berfungsi sepenuhnya, FOR SALE: BRUDERER BSTA 50USL High-Performance Punching Press With Automatic Feeder BBV 190 500 kN | 100–1120 strokes/min | Fully automatic | Swiss premium quality Technical Highlights: Rated force: 500 kN Strokes per minute: 100–1120 Operating hours: 41,000 h Main drive: 22 kW Control voltage: 24V DC Power supply: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment: 64 mm Working Areas: Max. tool mounting width: 1100 mm Strip feed width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Adjustable strip entry height: 60–140 mm Max. strip width: 120 mm Max. feed length: 85 mm Max. material thickness: 4 mm Feed angle: 180° Machine Dimensions (incl. BBV 190): Installation dimensions (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment: BBV 190 Feeding System – fully synchronized mechanical strip feed system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and ram height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration into peripheral systems Condition & Delivery: Machine in excellent technical and optical condition Fully serviced and tested Immediately available from Europe Fgsdswpg Rbspfx Agdei Worldwide shipping and installation support possible Contact us today for pricing and further technical details. We are happy to help you modernize your production line with Swiss precision.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, 1 Fsdpfx Ajydu Tfsgdsgi

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment Fgedpfx Agogpxc Sjdoi - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Refurbished BRUDERER Exzenter-Stanzautomat BSTA250-75B inkl. neuer Pressensteuerung PCS-100 Technische Daten Fgsdpfxjyb Etqo Agdoi Presskraft: 250 kN Werkzeugaufnahmefläche L-R x V-T: 750 x 530 mm Verstellbarer Hub: 13, 16, 19, 25, 32, 38, 44, 47 mm Hubzahl 13 mm Hub: 1.500 Hub/min 16 mm Hub: 1.350 Hub/min 19 mm Hub: 1.240 Hub/min 25 mm Hub: 1.075 Hub/min 32 mm Hub: 950 Hub/min 38 mm Hub: 810 Hub/min 44 mm Hub: 700 Hub/min 47 mm Hub: 650 Hub/min Anschlussleistung: 76 kVA Servomotorleistung: 47 kW Stößelabschlusshöhe: 175,5 - 239 mm (abhängig vom Hub) Stößelverstellung: 51 mm Bandbreite Einlauf: 210 mm Banddicke Einlauf: 50 – 120 mm Zusätzliche Informationen · Generalüberholte Exzenter-Hochgeschwindigkeitspresse · Hochdynamische, verstellbare Hubgestaltung · Moderne, leistungsstarke Pressensteuerung PCS-100 im modularen Design · Hocheffiziente Antriebstechnik für reduzierte CO2-Emissionen · Industrie 4.0-fähig über OPC-UA-Schnittstelle · Presskraftanzeige · Integrierte Werkzeugüberwachung · Integriertes Servovorschubsystem

Kondisi: bekas, Tahun pembuatan: 1987, nomor mesin/kendaraan: 87 / 906, Pressure: 63 t Stroke: 8 - 80 mm Stroke rate: 60 - 300 strokes/min Distance between uprights: 720 mm Table area: 710 x 700 mm Pass-through opening in table: 345 x 100 mm Lateral frame passage: 320 x 200 mm Ram area: 500 x 400 mm Fjdpfscxxpcox Agdogi Ram adjustment: 80 mm Throat depth: 350 mm Installation height: 250 / 275 mm Feed length: 220 mm Table height above floor: 1000 mm Total power requirement: 9.2 kW Approx. machine weight: 6.5 t Equipped with SZV 3-S gripper feed, designed for a strip width of 270 mm, stepless speed adjustment, separate control cabinet, safety emergency stop, selector switch for setup, single stroke, and continuous operation, adjustable stroke.

Kondisi: sangat baik (bekas), Soundproof cabins. For Bruderer stamping presses. Cabins available from stock for the following machines: BST 25 BST 41 BSTA 50 The enclosures are completely refurbished, carefully dismantled, and packaged for transport. Painted in white and anthracite (or other colors at the customer's request). The cabin is equipped with all necessary openings for easy use with a Bruderer press. Front and rear doors with inspection windows. Fgjdsiw Icbspfx Agdsi Air ventilator for climate control installed on the upper cover. For further information, please do not hesitate to contact us. We have Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, as well as Mabu and Schaal stamping presses in stock.

Tahun pembuatan: 1983, Kondisi: bekas, nomor mesin/kendaraan: 1338-5, Pressing force: 30 t Table size: 500 x 700 mm Stroke: 50 mm Ram bore: 40 mm Table through-hole diameter: 100 mm Total power requirement: 380 V, 11 kW Weight: 2,000 kg Fgjdpfxo N Hcge Agdei Space requirements: 1,000 x 2,300 x 2,170 mm