Beli Mesin stamping, penarik & broaching bekas (174)

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) Djdpfx Apjw H Dgno Eeck - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Dsdpfx Aot Dwb Dsp Ejck Distance between broaching stations: 380 mm Clamping diameter for broaching heads: 3 x Ø ___ mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system. Comments: The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1966, berat keseluruhan: 7.000 kg, tegangan masuk: 380 V, panjang broaching: 1.500 mm, jumlah posisi broaching: 3, diameter benda kerja (maks.): 575 mm, tinggi total: 5.100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of construction: 1966 Weight: approx. 6,700 kg Machine No.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations Dcodpfowql Rvox Ap Esk Pulling force: 20,000 kg Broaching stroke: 1,500 mm Number of broaching stations: 3 Distance between broaching stations: 2 x 145 mm Chuck diameter for broach heads: 3 x Ø 85 mm Clear width between columns: max. 580 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely adjustable from 7 up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm in height with tool shuttle raised) Power supply / Connection rating: 380 Volt, 50 Hz / 14 kW Accessories / Special features: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-actuated locking in the drawbridge and in the shuttle. The machine features an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal use, ideally a foundation (pit) or alternatively a platform is required. Broach heads and pushers are available on request. The machine can be inspected under power in our warehouse. General information We always have a large selection of around 80 used broaching machines in stock, with pulling forces from 3,000 kg up to 63,000 kg, in both horizontal and vertical configurations. A significant number of the broaching machines in stock are available for live demonstration. If required, we can also offer you used equipment such as broach heads, pushers, broaching tools, and other specific accessories. Our company operates as a contract broaching service provider, and we can also assist you with technical inquiries based on 50 years of experience in broaching technology.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 480 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, kecepatan mundur: 100 mm/dtk, diameter benda kerja (maks.): 800 mm, tinggi total: 1.680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of Manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine, make Wiemers SR 30 (100% compatible with Rausch RS 3) Pulling force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working area: 430 mm x 320 mm / 340 mm x 220 mm Table bore: Ø 90 mm for standard broaching mandrels “System Rausch” Workpiece diameter: unlimited (with removable coolant swing system) Broaching capacity / slot width: up to 20 mm in steel (for broaching tools from 16 mm slot width only with stepped tool shafts) Dimensions (h x w x d): 1370 mm x 680 mm x 750 mm (h = table height to floor without superstructures) Motor: 2.5 kW / 3.0 kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with interlock, safety query and safety monitoring - Easily removable swarf chute with tool extraction protection and parking bracket Dcodpfxsw D E Twj Ap Eok - Externally adjustable tool length setting system (reproducible machine-wide) - Protective covers for stroke adjustment and electrical switchgear - Oil-tight shelf on control cabinet - Electrical sensing of clamping jaws (tool removal control to prevent unintended return of pull bridge, providing additional safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swing system with automatic coolant control via swing system - Extra reinforced swarf basket and swarf screen with magnetic insert - Stainless steel operating panel with permanent markings - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical pre-wiring for external control unit (16-pin connector) - Provision for automatic jaw opening when broaching profiles via roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic jaw openers for easier tool removal during profile broaching - Three-sided splash guard enclosure (w x d x h): 700 x 350 x 600 mm - External electrical operating unit for broaching and return stroke as well as emergency stop operation Notes: The machine is 100% compatible with Rausch broaching machines of the same performance classes in the RS 3, RS 4, and RS 6 series. All fixtures, tools, and mandrels can be used without restriction. General Information The dual spindle drive ensures a smooth and central pulling action with a consistent broaching speed. The machine is primarily designed for cutting keyways up to 20 mm (for broaching tools from 16 mm width only with stepped tool shafts). The machine’s design enables fast and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table allow broaching with both profile and flat broaching tools. Profile broaching is possible without additional pull heads, simply using centering bushes. Broaching tools and mandrels compatible with the machine are available upon request.

Kondisi: bekas, Tahun pembuatan: 1986, berat keseluruhan: 6.500 kg, daya: 42 kW (57,10 hp), tegangan masuk: 380 V, panjang broaching: 1.600 mm, jumlah posisi broaching: 1, diameter benda kerja (maks.): 500 mm, Manufacturer: Varinelli Milano, Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine number: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Broaching stations: 1 piece Clear width between cylinders: max. 540 mm Cutting speed: hydraulically variable from 1 m/min up to max. 8 m/min Return speed: hydraulically variable up to max. 18 m/min Dcedpjwqmaxjfx Ap Esk Machine footprint: see machine layout drawing Power supply / connected load: 380 Volt, 50 Hz / 42 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-actuated locking mechanism (DIN 1417) in the drawbridge. The tool feeder system is locked hydraulically and mechanically. The machine features a coolant unit with an integrated chip conveyor for installation in a pit. Remarks: The machine still has its original paintwork. It is designed for use in series production for medium and large batch sizes. For optimal utilization, installation in a pit is ideally recommended. Draw heads and ejector pins are available on request. The machine is available for inspection at our warehouse. General Information: We constantly have a large selection of approx. 80 used broaching machines with pulling forces from 3,000 kg up to 63,000 kg, both in horizontal and vertical execution, in stock. Many of our broaching machines in stock are available for demonstration. If required, we can offer you used equipment such as draw heads, ejector pins, broaching tools, and other specific accessories. As a contract broaching service provider, we can also assist you with technical enquiries based on our 50 years of experience in broaching technology.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 400 kg, tegangan masuk: 400 V, panjang broaching: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / working surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard broaching tools “Rausch system” Workpiece diameter: arbitrary (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shanks) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (height incl. 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Electrical supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Safety door with safety monitoring (emergency stop circuit) - Easily removable chip chute with storage for tools - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (prevents unintentional return of the pull bridge, providing additional safety for operator and tool) - Integrated coolant unit - Coolant swivel system (without electrical switching function) - Three-sided splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip sieve with magnetic insert - Stainless steel operator panel with permanent marking - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled, with the machine body completely refurbished. The following wear parts have been replaced/renewed: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced - Coolant system incl. coolant/lubricant swivel system replaced - New dual-speed SEW gearmotor - New electrics (Siemens) - New safety door instead of light barrier Djdsw Huh Nopfx Ap Esck - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve, and spindle guard, are new - Stainless steel operator panel with permanent marking - Machine repainted with 2-component structural paint The machine carries the manufacturer’s CE marking. General: The double-spindle drive ensures smooth operation with a central pulling point and consistent broaching speed. The machine is primarily designed for producing keyway slots up to 18 mm (from 16 mm slot width only with stepped tool shanks). Due to its design, the machine enables quick and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table make it possible to use both profile and flat broaching tools without additional pull heads.

Kondisi: bekas, Tahun pembuatan: 1990, maks.: gaya tarik 25.000 KG maks.: panjang alat 3520 mm maks.: kecepatan pemotongan 9,6 m/menit lebar buka lewat 520 mm Mesin ini telah memproses batang penghubung dan tutup batang penghubung. Mesin ini dirancang untuk produksi massal (output 400 buah/jam) Dcsdpscm Eiwjfx Ap Eek

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, nomor mesin/kendaraan: 959, Kami menawarkan mesin bekas LCM PRIMA PRIMA INSERTER MAXI 450 ini, tahun pembuatan 2023. Produsen: LCM Divisione Macchine Tipe: PRIMA Nomor seri: 959 Tahun pembuatan: 2023 Kondisi: bekas – seperti baru Ketersediaan: siap dikirim Mesin dalam kondisi praktis sempurna – hanya digunakan untuk membuat beberapa prototipe, sehingga tingkat ausnya sangat minimal. Semua komponen berfungsi dengan baik, tanpa tanda-tanda pemakaian. Dodpfsy Dax Iex Ap Eeck Jika ada pertanyaan atau membutuhkan informasi tambahan, silakan kirim pesan atau hubungi kami melalui telepon.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1972, jam operasional: 24 h, nomor mesin/kendaraan: 2025, berat keseluruhan: 5.200 kg, daya: 10 kW (13,60 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, panjang broaching: 320 mm, diameter benda kerja (maks.): 630 mm, panjang total: 2.650 mm, lebar total: 1.810 mm, tinggi total: 2.890 mm, Slotting Machine STANKO 7M430 Die STANKO Modell 7M430 ist eine Schwerlast-Nutschneidemaschine (Vertikal-Nutschneidemaschine), konzipiert für das Bearbeiten von Innennuten, Keilnuten, Innverzahnungen und profilierten Flächen in großen und schweren Werkstücken. Baujahr 1972. Diese Maschine ist für industrielle Anwendungen ausgelegt, die eine robuste Bauweise, hohe Steifigkeit und zuverlässigen Betrieb erfordern. Die Maschine ist mit einem schwenkbaren Rundtisch mit 630 mm Durchmesser ausgestattet, was eine flexible Positionierung der Werkstücke ermöglicht. Der maximale Hub des Schlittens beträgt 320 mm (Minimalhub: 120 mm) und gewährleistet damit einen großen Arbeitsbereich für verschiedene Nutarbeiten. Der Nutkopf ist um ±10° schwenkbar, was die Bearbeitung unter Winkeln und eine erhöhte Vielseitigkeit erlaubt. Die Vorschübe in X- und Y-Richtung sind im Bereich von 0,2 bis 2,4 mm pro Doppelhub einstellbar, während der Tisch-Rundvorschub zwischen 0,1 und 1,4° eingestellt werden kann. Damit ist eine präzise Steuerung der Schnittparameter möglich. Die maximale Tischbelastung beträgt 3.000 kg, sodass die Maschine auch für große und schwere Werkstücke geeignet ist. Der Abstand zwischen Tischoberfläche und Meißelführung beträgt 500 mm. Die Tischeilwege betragen 650 mm längs, 500 mm quer, Tischdrehung 360°. Der Antriebsmotor hat eine Leistung von 10 kW und bietet damit ausreichend Schnittkraft für anspruchsvolle Bearbeitungsaufgaben. Die Maschinenabmessungen betragen ca. 2.650 × 1.810 × 2.890 mm. Das Gesamtgewicht liegt bei etwa 5.200 kg. Die STANKO 7M430 zeichnet sich durch eine sehr stabile Graugusskonstruktion aus, die exzellente Schwingungsdämpfung und hohe Langzeitstabilität gewährleistet. Zustand: * Gebrauchtmaschine * Betriebsbereit * Voll funktionsfähig * Betriebsstunden: ca. 24 h Lieferumfang: Dcsdpfx Aex U Tr Ajp Ejk * Komplettsatz Wechselräder * Technischer Pass (Russisch) * Betriebsanleitung (Russisch) Typische Anwendungen: * Nutenstoßen von Innenkeilnuten * Bearbeitung von Innverzahnungen * Profilbearbeitung von Innenflächen * Bearbeitung großer und schwerer Werkstücke * Allgemeiner Maschinenbau und Instandsetzung

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, jam operasional: 3.710 h, nomor mesin/kendaraan: -, Šaltojo valcavimo linija DEM MTO 760/2 Pagaminimo metai: 2013 Variklio darbo valandos: 3710 Įrenginiai ir komplektacija: 1. SVV/2 dvigubas vertikalios ašies ritinių padavimo įrenginys 2. RD 140/1 mechaninis gludinimo (skalės pašalinimo) agregatas 3. SA-CLR tepimo stotelė Dcodpfovduwmox Ap Eek 4. MTO 760/2 dviejų sekcijų šaltojo valcavimo staklės 5. BOM 1250 horizontalios ašies suvyniojimo įrenginys 6. Elektros spinta 7. Operatorius valdymo pultas. Į visus papildomus klausimus atsakysime raštu.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: 0435532, MASCHINENDATEN Maschinentyp: Wälzfräser – Zahnradfräsmaschine Hersteller: TOS Modell: FO-10 Baujahr: 1989 Seriennummer: 0435532 Zustand: Sehr gut – fast neuwertig Noch in Betrieb Max. Modul: 14 Min. Modul: 1,5 Max. Durchmesser: 1.500 mm Max. Breite: 450 mm Für Zahnräder von Z9 bis Z448 Dedpfxjd R Ri Uo Ap Eeck Hauptantrieb: 12 kW Gewicht: 9.800 kg Originalfarbe: RAL 6017 Betriebshandbuch – Service vorhanden Abmessungen: L 3.200 x B 1.800 x H 2.530 mm Vollständiges Zubehörpaket – Teile – alle Modulfräser enthalten Ohne zusätzliche Kosten sofort einsatzbereit PREIS: 70.000 €

Kondisi: bekas, Tahun pembuatan: 2000, de-techdetails-01 Dcedpfx Aow Dugaep Esk

Kondisi: bekas, Tahun pembuatan: 1964, Serial number 23046 Stroke 320 mm . +++++ Please note that the machine is currently dismantled and ready for loading. For this reason, a powered demonstration or the production of a video is not possible. Furthermore, our listing contains the most informative photos of the best possible quality. Unfortunately, it is not possible to provide any additional images. Dcjdpfx Apofgpdrj Ejk +++++

Kondisi: bekas, Tahun pembuatan: 1989, Hub 600 mm Dcjdpew Sykfsfx Ap Eek hidraulis ya aksesori tidak disertakan berat 3,7 t

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), DE-SMS MEER CNC-DOPPELSEITIGE ANFASMASCHINE Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohr-Ø 21,3 – 114,3 mm Wandstärke: 2,3 - 11 mm Länge: 6-12 m Bestehend aus zwei RFA14-Angleautomaten mit Fördereinrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Anfasen der Innen- und Außenseite beider Rohrenden. Der Durchmesserbereich der angefasten Rohre beträgt 21,3-114,3 mm bei einer Wandstärke von 2,3-11 mm und einer Länge von 6-12 m. Die Aufgabe des Transports im Bereich der Anfasmaschinen besteht darin, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu bewegen. Dcsdpsghrgujfx Ap Eek

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Type: HRA4/80-4 Pipes: Ø 6 to 24 mm, wall thickness = 1 to 2.5 mm • Mandrel: Ø3 to 12 mm Dodpehmfh Hsfx Ap Eock

Tahun pembuatan: 1986, Kondisi: hampir baru (bekas), Weitere Informationen auf Anfrage Dedpfx Aohmfnhjp Esck

Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 27 m/min Maximum workpiece diameter: 320 mm Broaching stations: 3 units Weight: 4.8 t automatic tool feeder Dedpfx Ascdtplep Esck hydraulic pull head and end piece holder locking automatic loading device for workpieces up to 100 mm diameter magnetic chip conveyor

Tahun pembuatan: 1959, Kondisi: bekas, Max. Zugkraft: 16 t Max. Hub: 1250 mm Schnittgeschwindigkeit: 5.6 m/min Dedpfx Apo Rwa Us Esck Rücklaufgeschwindigkeit: 30 m/min

Tahun pembuatan: 1960, Kondisi: bekas, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Dsdpfx Apsui Sbe Eock Max. tool diameter: approx. 50 mm Broaching stations: 2 units The machine is equipped with a 2-station rotary indexing table. The machine has an automatic tool feeder and is designed for manual series production. Tool locking within the pulling bridge and in the tool feeder is carried out via a spring-actuated mechanism (pulling head according to DIN 1417).

Tahun pembuatan: 1956, Kondisi: bekas, nomor mesin/kendaraan: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3,450 kg Machine No.: 1413 General Information / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching positions, in operational condition. Pulling force: 13,000 kg (maximum) Broaching length: 1,200 mm Number of broaching positions: 3 Distance between broaching positions: 100 mm Clamping diameter of pull head: Ø 85 mm Clear width between cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended) Power supply / Connected load: 380V 50Hz / 7.5 kW Accessories / Special features: The machine's crossbeam is equipped with 3 broaching tool holders; the workpiece table has 1 broaching position (modifiable). The tool clamping system and tool feeder are designed for spring-mechanical locking (DIN 1415). The machine is fitted with an automatic tool feeder; the existing feeder can currently accommodate only 1 tool (central broaching position). Integrated coolant system suitable for cutting oil. Dodpfx Ajdbmgmop Eock Notes: The machine is in age-appropriate good condition and ready for immediate use. Designed for manual operation in medium batch production. It features an automatic process cycle. For optimal use, a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools available upon request. The machine can be inspected under power at our warehouse.

Tahun pembuatan: 1951, Kondisi: baik (bekas), nomor mesin/kendaraan: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine No.: 1133 General information / technical data: Hydraulic horizontal broaching machine in good operational condition Broaching stroke: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide Through bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: Hydraulically stepless adjustable from 2 m/min to 7 m/min Return speed: Hydraulically stepless adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / special features: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant/lubricant system • The machine has an oil and chip tray with a tool feeder carriage Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is clean in the areas of the guides and the cylinder. Broaching tools and arbors can be supplied on request. The machine is available for inspection and demonstration under power in our warehouse. Dedpfxjdcdrps Ap Eeck

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 25,000 kg Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for broaching heads: 3 x Ø 100 mm Clear width between cylinders (nominal size): 500 mm Clear width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / Connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable). The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse. Djdpsdffzfjfx Ap Esck

Tahun pembuatan: 1958, Kondisi: bekas, nomor mesin/kendaraan: 1545, en-001 Dcsdpfxjda Ugij Ap Eek

Tahun pembuatan: 1982, Kondisi: baik (bekas), nomor mesin/kendaraan: 3120, Manufacturer: Varinelli Milano Italy Model: BV 25 x 2000 x 630 Djdod I R Ngepfx Ap Eock Year of manufacture: 1982 Machine no.: 3120 Weight: 13,000 kg General / Technical Data: Vertical hydraulic internal broaching machine with 3 broaching stations and a movable workpiece table, in good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Broaching stations: 3 units Distance between broaching stations: 200 mm Clear width between cylinders: max. 630 mm Cutting speed: hydraulic, steplessly adjustable from 1 m/min up to max. 9 m/min Return speed: hydraulic, steplessly adjustable up to max. 18 m/min Machine footprint: see machine layout drawing Power supply / connected load: 380 Volt 50 Hz / 43 kW Accessories / Special equipment: The machine is equipped with a workpiece shuttle table for 3 broaching stations. The tool clamping system features a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The automatic tool feeder is hydraulically and mechanically locked. The machine is fitted with a coolant system and an integrated chip conveyor for installation in a pit. Remarks: The machine is in good condition and still has its original paintwork. It is designed for series production of medium and large batch sizes; for optimal use, installation in a pit (foundation) is required. Pulling heads and ejector needles are available on request. The machine can be inspected at our warehouse.