Beli Rausch bekas (17)

Kondisi: baik (bekas), Tahun pembuatan: 2014, Rausch Entgratomat 500, year of manufacture 2014, Siemens Simatic HMI control system. Coarse burr removal and fine deburring. Module (m) from 2–8. Chamfer geometry: 0.1 x m mm. Gear types: straight, helical, or spiral. Maximum workpiece diameter: 500 mm. Maximum workpiece weight: 50 kg. Milling spindle speed: 18,000 up to max. 50,000 rpm. Collet size: 6 mm. Includes Kuka robot with SPS S7 and HMI Mobile Panel KTP 900. Deburring of sample workpieces possible. Knjdpfx Aexpvbyjdqsc

Kondisi: bekas, Tahun pembuatan: 1959,

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: 3813, berat keseluruhan: 600 kg, daya: 7 kW (9,52 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang broaching: 1.000 mm, diameter benda kerja (maks.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of manufacture: 2019 Never put into operation Complete documentation Kedpfew Evkiex Adqonc Without broaching tools Working range Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal broaching: Tool feed: manual/automatic Max. workpiece diameter: 300 mm External broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate area: 255 mm x 400 mm T-slots: 2 pieces, 14 mm wide, parallel/perpendicular to the tool slide mounting surface Accessories/Special equipment: Coolant system Broaching tool safety device Machine hood for work area protection Required space: 0.72 m x 1.3 m x 2.67 m (L x W x H) Weight: 600 kg Voltage: 400 V Electric current: 3-phase Υ/Δ, 50 Hz Connected load: 12 kVA Max. pre-fuse: 25 A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching tool holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½ “ Please send inquiries by email only. All information provided to the best of our knowledge. Subject to errors. This offer is directed exclusively to entrepreneurs as defined by § 14 BGB. Sale is made under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller as well as for injury to life, body or health. For further information, please visit the Witzenmann GmbH website under the headings "Imprint", "Terms and Conditions" and "Data Protection".

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new - The following components have been overhauled and reused: -- Machine base -- Machine stand Kjdpfsw Ighisx Adqenc -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Kondisi: siap digunakan (bekas), A used Rausch RS 6/1300 broaching machine with accessories For technical data, please refer to the PDF Ksdpfx Adsv Ulhdjqenc

Tahun pembuatan: 1963, Kondisi: bekas, Wheel diameter - max. 2000 mm Wheel width 0 mm Module - max. 0 Weight approx. 700 kg Space requirement approx. 2x1.2x1.5 m Incomplete machine body with drive unit. Drive unit is still fully functional. Knsdpfod Ngrpex Adqjc

Tahun pembuatan: 1978, Kondisi: baik (bekas), nomor mesin/kendaraan: 6006/478, Broaching Machine - Vertical Manufacturer: Rausch Model: RS8/1300 Knodpsfc T E Asfx Adqec Year of manufacture: 1978 Pulling force: 8 tons Stroke: 1,300 mm Weight: 0.92 tons

Kondisi: siap digunakan (bekas), Vertical Broaching Machine Rausch Model: RSIZ 6 / 1000 S Kedpfedyp Rmox Adqjnc Condition: Used Technical data: Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Return speed: 10 m/min Internal broaching: maximum workpiece diameter 600 mm External broaching: clamping plate area 600 x 340 mm Coolant system Tensile force gauge Automatic central lubrication Spindle protection via spring band spirals Chip conveyor Cut-off counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Self-collection or shipping via freight forwarder. We are happy to assist you in organizing cost-effective shipping. You are welcome to arrange a viewing appointment. You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT identification number is available. Prior sale reserved. Company names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. The machines and tools are sold in their current condition. Assembly and electrical connection of the machine/equipment must be carried out and/or inspected by properly trained personnel. Deviations from technical data and mistakes in the description may occur and are reserved.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Knjdpfx Adew H Dgnjqsc Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 662681751, Manufacturer: Rausch Type: RS6 / 1300 Machine No.: 662681751 Knodsfc T Edepfx Adqsc Year of manufacture: 1992 Power supply: 3-phase ~ 380 Volt / 50 Hz Connected load: 7.1 kW Rated current: 17 Amps Weight: 810 kg Wiring diagram number: RS6 – 39 With unit Table dimensions: 520mm x 320mm

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 400 kg, tegangan masuk: 400 V, panjang broaching: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / working surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard broaching tools “Rausch system” Workpiece diameter: arbitrary (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shanks) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (height incl. 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Electrical supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Safety door with safety monitoring (emergency stop circuit) - Easily removable chip chute with storage for tools - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (prevents unintentional return of the pull bridge, providing additional safety for operator and tool) - Integrated coolant unit - Coolant swivel system (without electrical switching function) - Three-sided splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip sieve with magnetic insert - Stainless steel operator panel with permanent marking - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled, with the machine body completely refurbished. The following wear parts have been replaced/renewed: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced - Coolant system incl. coolant/lubricant swivel system replaced - New dual-speed SEW gearmotor - New electrics (Siemens) - New safety door instead of light barrier - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve, and spindle guard, are new - Stainless steel operator panel with permanent marking - Machine repainted with 2-component structural paint The machine carries the manufacturer’s CE marking. General: Kedow Huh Nepfx Adqonc The double-spindle drive ensures smooth operation with a central pulling point and consistent broaching speed. The machine is primarily designed for producing keyway slots up to 18 mm (from 16 mm slot width only with stepped tool shanks). Due to its design, the machine enables quick and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table make it possible to use both profile and flat broaching tools without additional pull heads.

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1083, Broaching machine - Vertical Manufacturer: Rausch Model: RS10/915 Machine number: 1083 Year of manufacture: 1962 Pulling force: 10 tons Stroke: 915 mm System: DIN 1415 Knjdefc T Euspfx Adqoc With platform for above-floor installation

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 60305, en-001 Kjdeiqkb Repfx Adqsnc

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 758, Overhauled Kodpjbrcmhofx Adqjnc Towing capacity: 2 t Lift: 1000 mm

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WAG 3102, en Knedev Rpnmjpfx Adqsc

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 20236, Tractive force: 10 t Lift: 1500 mm 1 broaching station Weight: approx. 1800 kg Knjdpfxsbrcmre Adqsc Power: 9.5 kW/380V With feeder and mechanical chip conveyor

Tahun pembuatan: 1968, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Kedpfov Rmvzjx Adqjnc Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch RS 6G, unused, with “CE” marking Pulling force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / work area: 610x470 mm / 520x320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unrestricted Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height to floor without superstructures) Motor power: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic locking and safety interlock - New chip chute with tool parking facility - Protective covering for stroke adjustment - Oil-tight shelf on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the pull bridge; extra safety for operator & tool) - Integrated coolant system with electrically actuated solenoid valve and drain tap - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length setting system (reproducible across machines) - Stainless steel control panel with durable labeling - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Remarks: The machine is completely overhauled. During the overhaul, the machine base, machine body, and table have been completely refurbished. All wear parts have been replaced. The machine is upgraded to the state-of-the-art and complies with current “CE” regulations. It is supplied with a “CE” certificate. General: The double spindle drive provides smooth operation and a central pull point as well as a constant broaching speed (selectable broaching speed: 3 m/min or 6 m/min). The design enables quick and easy setup for keyway broaching using flat broaching tools. Thanks to the universally designed pull bridge and machine table, profile and flat broaching tools can be used without the need for additional broach holders. Matching broaching tools and mandrels for this machine are available on request.