Beli Mesin bubut otomatis tipe panjang bekas (225)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar loader, an integrated hydraulic unit, and supports both at the front and rear with a center height of 1100 mm. The machine features a movable headstock, a directional spindle stop, and a cross slide with tool holders. It is ideally suited for precision turning operations and operates with AC drive motors and an absolute measurement system. Contact us for further information regarding this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018) 2017 Overhaul Details: Standard overhaul package: Block III maintenance, cleaning, and recommissioning. Overhaul of the guide bushing and overhaul of spindles S1, S2, and S4. Replacement of all ball screws, including bearings, and the guides on all axes. Replacement of coolant pump, all coolant lines, and the coolant sensor. Replacement of wipers on the cross slides. Replacement of all pneumatic lines and valves. Replacement of machine lighting, viewing panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). New central lubricating system installed. Replacement of bellows coupling, external encoders, and monitor. Replacement of the control and amplifier fans. Upon recommissioning, the 'Spindle Positioning S4' option was also activated and the bar loader was set up. Additional Information Ncedpjx D D Ikofx Abvjp • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14, with vertical and horizontal movement • Absolute measurement system • 9 axes with C1 and C4 • Drum bar loader 'HYBRIDE 10+5' • 14 guide tubes for 1–4 mm bars • 14 guide tubes for 4.1–10 mm bars, without bar preparation up to 8 mm • Tryton collet • 2 different hybrid drums • Direction-dependent spindle stop S1 • Can be equipped with Robobar SSF 3 m bar loader Technical Specification Counter spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, a direction-dependent spindle stop, and several cross slides with tool holders for versatile machining operations. Equipped with a counter spindle and programming software available in five languages, it is ideal for complex turning applications. It includes interfaces for bar feeders and tool breakage detection. Further details on this machine are available upon request. Additional Information • Programming software TB-DBCO Version 6: Stand-alone product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Movable headstock: Axes S1/Z1, n = 16,000 rpm, collet F13 • Spindle stop: Direction-dependent spindle stop S1 (programming step 0.1 degree) • Cross slides: • 1 cross slide with 4 tool positions (axes X1 and Y1) • 1 cross slide with 3 tool holders (axes Z3 and X3) • 1 cross slide with horizontal and vertical movement (axes Z4 and X4) • Pneumatic cylinders: 3 independent cylinders for rapid positioning • Counter spindle: Independent (S4), n = 12,000 rpm, collet F13 • Cross-slide support options: • Pre-settable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right-handed • S2 drive (electrical/mechanical) for powered attachments on the X2-Y2 linear tool carrier Nodox D Dm Hjpfx Abvecp • Powered end drilling/milling unit: Max. speed 12,000 rpm • Cross drilling/milling/tapping unit for collet BSX 12 • Sensor: Tool breakage detection with MIDI-DETECTOR type, mini-toggle probe MINI-DETECTOR type, electrical interface, pneumatic control devices • Interface: Adaption for an LNS bar feeder • Spindle speed: n = 16,000 rpm indicates the machine has a moderate spindle speed capacity • Additional: Comprehensive set of measuring devices Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, kecepatan spindel (maks.): 8.000 rpm, produsen pengendali: FANUC, model controller: na, jumlah sumbu: 9, en Ncodpfjyalnrex Abvop

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 10.000 rpm, produsen pengendali: FANUC, model controller: Series 18i-TB, jumlah sumbu: 7, Mesin bubut STAR SR-20 R II ini diproduksi pada tahun 2004. Dilengkapi dengan kontrol Fanuc Seri 18i-TB dan memiliki 7 sumbu. Mesin ini memiliki kecepatan spindle 500-10000 rpm. Keunggulan mesin Keunggulan teknis mesin • Panjang pemesinan: 205 mm • Diameter maksimum batang: Ø 20 mm • Diameter maksimum saat pembubutan dari batang: Ø 20 mm Ncodpeyi Emmofx Abvjp • Kecepatan spindle lawan: 8000 rpm, daya motor: 2,2 kW • FMB barfeeder model Turbo 3-26/3200/a

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, daya motor spindle: 7.500 W, kecepatan spindel (maks.): 7.000 rpm, berat keseluruhan: 2.200 kg, tinggi total: 1.700 mm, diameter benda kerja (maks.): 32 mm, jumlah sumbu: 7, Diese 7-achsige Star SR-20J Typ C Swiss Type Turning wurde im Jahr 2015 hergestellt. Sie bietet einen maximalen Bearbeitungsdurchmesser von 32 mm, einen Spindelstockhub von 310 mm und Spindeldrehzahlen von bis zu 7.000 U/min. Ausgestattet mit einem Hydrajet BF20-2000 Hochdruck-Kühlmittelsystem und einer Absolent A.Mist 10S Nebelabsaugung, ist die Star SR-20J Typ C eine robuste Ergänzung für jede Bearbeitungseinrichtung. Kontaktieren Sie uns für weitere Details zu dieser Swiss Type Turning. Zusätzliche Ausrüstung • Hochdruck-Kühlmittelsystem: Hydrajet BF20-2000 • Nebelabsauganlage: Absolent A.Mist 10S • Feuerlöscher: Status X Ncedpfxsyi Emtj Abvop • Signalerzeugungsturm: Werna Maschinenvorteile Qualitative Maschinenvorteile • Umfassende sicherheits- und umweltmanagementsysteme (feuerlöscher, nebelabsaugung) gehören dazu. Technische Maschinenvorteile • Eilganggeschwindigkeit 24m/min, maximale spindeldrehzahl 7000 u/min, maximale drehzahl des angetriebenen werkzeugs 6000 u/min Zusätzliche Informationen Handbücher inklusive Maschine noch unter Strom Dimensions Machine Depth 2250 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 3.500 kg, tinggi total: 1.600 mm, jarak pergerakan sumbu X: 310 mm, produsen pengendali: FANUC, model controller: Series 18i-T, panjang produk (maks.): 2.600 mm, jumlah sumbu: 3, en Njdpfx Ajydlpqsbvocp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 12.000 rpm, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This Swiss lathe TORNOS DECO 2000 was manufactured in 2000. It features a movable headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent counter spindle, a lubrication system, and a drum bar loader. It comes with a 'HYBRIDE 10+5' drum for bar stock up to 10 mm and an integrated hydraulic unit. For more information about this machine, please contact us. Additional Information • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slides with 4 tool stations T11-T24 with vertical and horizontal movement • Swiveling workpiece holder at the counter spindle • Direction-dependent spindle stop S1 • 3 presettable turning tool holders • 4 fixed tool holders • 'HYBRIDE 10+5' drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm Ncjdpfxjx D Dmyo Abvsp • Independent counter spindle • Thread cutting device for collet ESX 12 • Lubrication device for guide bush with filter • Drum-type bar loader • Integrated 25-liter hydraulic power unit with filter • Front and rear support feet, center height 1100 mm Optional: Comprehensive measuring device package Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 3.400 kg, tinggi total: 2.020 mm, produsen pengendali: FANUC, model controller: 32i-B CNC, jumlah sumbu: 6, Mesin bubut Swiss TSUGAMI HS32 6-sumbu ini diproduksi pada tahun 2011. Mesin ini memiliki kapasitas batang maksimum 32 mm dan dilengkapi dengan kontrol CNC Fanuc 32i-B. Kecepatan spindle utama dan sub-spindle mencapai hingga 8.000 rpm, sedangkan alat penggerak dapat berputar hingga 5.000 rpm. Manfaatkan kesempatan ini untuk membeli mesin bubut Swiss TSUGAMI HS32 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Keunggulan Mesin Keunggulan Teknis Mesin • Kapasitas batang maksimum: 32 mm (1,26 inci) • Kecepatan alat penggerak: hingga 5.000 rpm Informasi Tambahan Mesin masih terhubung listrik Dimensi Kedalaman mesin: 2020 mm Nsdpfxsx D R Uqs Abvocp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, produsen pengendali: FANUC, ESCO Escomatic EC12 ini diproduksi pada tahun 2010. Sebagai mesin bubut asal Swiss, mesin ini ideal untuk presisi dan efisiensi dalam produksi komponen kecil. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Perlengkapan tambahan • 3x automatic bar feeder • 1x perangkat penarik kawat gulung Keunggulan mesin Keunggulan teknis • Kapasitas batang (melalui spindle): hingga 12 mm • Daya nominal: 15 kVA • Arus nominal: 32 A • Tegangan operasi: 3-fase, 400V / 50Hz • Tegangan kontrol: 24V DC • Jenis arus: arus bolak-balik (AC) • Tegangan penerangan: 24V DC Ncsdpfx Absyar E Rovep Informasi tambahan Tersedia 3 mesin identik yang sepenuhnya berfungsi Suku cadang tambahan juga termasuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, daya motor spindle: 5.500 W, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 3.200 kg, CITIZEN M32V Swiss Type Turning ini diproduksi pada tahun 2007 di Jepang. Mesin ini memiliki kecepatan spindle 8000 rpm. Brosur resmi terlampir untuk detail lebih lanjut. Keunggulan mesin Keunggulan teknis mesin • Penjepitan material batang maksimum: Ø 32 mm • Panjang pemesinan maksimum: 320 mm • Diameter bor maksimum spindle utama: Ø 12 mm • Lubang spindle belakang maksimum: Ø 10 mm • Kecepatan maksimum spindle belakang: 7000 rpm • Daya maksimum spindle belakang: 2 kW • Alat putar: 5 alat tetap • Alat turret: 10 posisi Njdpfx Aeyi Einobvocp • Pengumpan batang: IEMCA Boss 332 e/r tipe 37II • Perlengkapan: konveyor serbuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss lathe featuring a sliding headstock, direction-dependent spindle stop, and multiple tool holders for versatile operations. It includes an independent sub-spindle, a lubrication unit, and a drum magazine. Ideal for precision turning operations with a maximum bar capacity of 10 mm. Take advantage of this opportunity to purchase the Swiss TORNOS DECO 10e lathe. Contact us for further information. Ncsdjx D Dmmjpfx Abvep 2 similar units available! Additional Features: • Sliding headstock • Direction-dependent spindle stop S1 • Cross-slide with 4 tool holders T11-T24, capable of vertical and horizontal movement • Independent sub-spindle • Swiveling workpiece holder on the sub-spindle • Lubrication device for guide bush with filter • 3 presettable turning tool holders • Motorization S2 • Thread cutting unit for collet chuck ESX 12 • 4 fixed tool holders • Drum-style bar feeder magazine • Integrated 25-liter hydraulic power unit with filter • Front and rear support stands, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation required up to 8 mm) • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Max turning diameter: 10 mm Optional: Comprehensive set of measuring devices available Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 37.578 h, Diameter batang (maks.): 8 mm, jumlah sumbu: 9, en Nodex D Dm Tspfx Abvscp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 10.000 rpm, produsen pengendali: FANUC, model controller: Series Oi-TD, jumlah sumbu: 5, Mesin TORNOS Delta 20/5 5-sumbu ini diproduksi pada tahun 2008. Mesin ini dilengkapi dua spindle, masing-masing dapat mengerjakan batang dengan diameter hingga 20 mm dan panjang 170 mm dengan kecepatan hingga 10.000 rpm. Dikendalikan oleh CNC Fanuc Seri Oi-TD dan dilengkapi dengan magazine loader batang Robobar, mesin bubut Swiss ini sangat ideal untuk pekerjaan presisi. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Njdpfx Abox Sz A Dsvjcp • Jumlah spindle: 2 • Spindle utama: • Diameter batang maks.: 20 mm • Panjang kerja maks.: 170 mm • Panduan bush penggerak • Spindle penyangga: • Diameter batang maks.: 20 mm • Kecepatan spindle: 10.000 rpm • Daya spindle: 2,2 kW Perlengkapan tambahan • Magazin loader batang: Robobar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 29.200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a coolant system with a capacity of 600 liters and a 50-µm filter, as well as a high-pressure pump with selectable options of 8 or 20 bar. The machine is equipped with a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar feeder for 3-meter bars. With a chip discharge height of 1,250 mm, it is designed for efficient operation. Please contact us for further information about this machine. Njdpex D H I Tofx Abvocp Additional Equipment • Mechanical and electrical preparation for fire extinguishing system • Coolant system with 600-liter capacity and 50-µm filter • Pump with 8 or 20 bar options • IEMCA Boss 332E bar feeder for bar lengths up to 3 m • Bristol B270/E oil mist separator • Movable headstock (80mm) with tooling on slide plus tool breakage detection Machine Advantages Technical Advantages • Chip discharge height: 1250 mm Additional Information Machine still under power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply Ncsdpfox D Drcex Abvep • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This Tornos DECO 10e was manufactured in 2010. It is a Swiss sliding headstock lathe featuring a direction-dependent spindle stop and an independent sub-spindle. The machine comes equipped with a drum-type bar feeder and an integrated 25-liter hydraulic unit. Designed for precise turning operations in small batch production, it supports bar diameters from 1 to 10 mm, with processing up to 8 mm possible without bar end preparation. Please contact us for further information regarding this machine. Additional Information • Electrical control cabinet Nodpfx Aex D Dndjbvecp • Cross slide with 4 tool holders (T11–T24) with vertical and horizontal movement • 3 preset turning tool holders • 4 fixed tool holders • Thread cutting device for ESX 12 collet • Sliding headstock • Independent sub-spindle • Swivelling workpiece holder on sub-spindle • Lubrication device for guide bushing with filter • Drum-type bar feeder • Integrated 25-liter hydraulic power unit with filter • Front and rear support pedestal, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars, allowing up to 8 mm without bar end preparation • Motor voltage 400 V • Control voltage 24 V • Spindle drive motor speed n = 12,000 rpm Optional: Comprehensive measuring equipment package Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, kecepatan spindel (maks.): 6.000 rpm, berat keseluruhan: 8.500 kg, jumlah sumbu: 9, Mesin bubut Swiss TSUGAMI TMB 2E 9-sumbu ini diproduksi pada tahun 2012. Dilengkapi dengan spindle utama dan sub-spindle yang mampu berputar hingga 6.000 rpm dan daya 11 kW. Mesin ini memiliki turret dengan 16 posisi serta spindle milling yang mencapai hingga 10.000 rpm. Mendukung kecepatan rapid hingga 50 m/menit pada sumbu X dan Y, serta 36 m/menit pada sumbu Z. Pertimbangkan kesempatan untuk membeli mesin bubut Swiss TSUGAMI TMB 2E ini. Silakan hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keunggulan teknis mesin • Kepala turret 16 posisi • Kapasitas magazin alat: 30 alat Ncjdpjx R E I Ujfx Abvop • Konfigurasi sumbu: 8 sumbu + sumbu B Spesifikasi teknis Ukuran tirus: Capto C4

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, daya motor spindle: 3.700 W, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 1.350 kg, tinggi total: 1.000 mm, jumlah sumbu: 6, This 6-axis Miyano BX-26S was manufactured in 2010 and features a maximum bar diameter of Ø26 mm and a maximum machining length of 330 mm. Equipped with a double spindle system offering speeds up to 8,000 rpm and a linear turret with a total of 18 tools, the machine is controlled by a FANUC 18i-TB CNC, supporting 6 controlled axes and 4-axis simultaneous interpolation. If you are looking for high-quality turning capabilities, consider the Miyano BX-26S, which we are offering for sale. Please contact us for further information. Machine Advantages Technical Specifications: • Maximum bar diameter: Ø26 mm (Ø20 mm for BX-20S) • Maximum machining length: 330 mm • Bed type: Flat Additional Information Turret Turret type: Linear Total number of tools: 18 Rotating tools (Slide 1 / Slide 2): 6 / 4 Stationary tools (Slide 1 / Slide 2): 4 / 4 Tool size: Slide 1: Ø16 mm Slide 2: Ø16 mm Threading capacity (L-SP / SP): M8 Drilling capacity (L-SP): Ø12 mm Bar Feeder Collet type: AR-16 Collet: AR-16 Clamping Force Clamping force (Z1 / Z2 L-SP and R-SP): 3325 N Other axes: 1847 N Travel Slide 1 travel distances: X1: 135 mm Y1: 260 mm Z1: 70 mm Slide 2 travel distances: X2: 215 mm Y2: 75 mm Z2: 180 mm Media Tank capacities: Hydraulic: 10 L Coolant: 140 L Electrical Specifications: Power supply capacity: 20 KVA Voltage: AC200/220V Frequency: 50/60 Hz Required air pressure: 0.5 MPa Fuse capacity: 40 A Control Unit CNC: FANUC 18i-TB Controlled axes: 6 axes (X1, Z1, Y1, C1, X2, Z2, Y2, C2) Simultaneous interpolation: 4 axes Commands: G00, G01, G02/G03, G32, G04, G98/G99 Special functions: Tool compensation, repetitive cycles, macro programming, backlash compensation Display: 9.5" CRT Control panel: Flat keyboard Input/Output: RS-232-C Nsdpfxeyaip Ts Abvscp Electric Motors: Spindles (L-SP / R-SP): 3.7 / 2.2 kW Slides (X1, Y1, Z1, Y2, X2, Z2): 0.5 - 0.75 kW Rotating tool: 0.5 kW Hydraulic motor: 0.75 kW Coolant pump: 0.2 kW High-pressure coolant pump: 0.821 / 1.349 kW Dimensions Machine depth: 2140 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, daya motor spindle: 5.500 W, kecepatan spindel (maks.): 7.000 rpm, berat keseluruhan: 2.900 kg, produsen pengendali: FANUC, model controller: 18i-TB, jumlah sumbu: 7, This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 - 7,000 rpm and counter spindle speeds of 200 - 6,000 rpm. If you are looking for a high-quality lathe, you should consider the TSUGAMI BS32CE-V Swiss-type lathe we have for sale. Contact us for further details. • Condition: Very good; low hours • Power-on hours: 28,538 • Spindle hours: 9,190 • Number of spindles: 2 • Maximum turning diameter: 32 mm • Maximum turning length: 250 mm • Max. drilling diameter: 12 mm • Max. thread cutting diameter: M10 • Counter spindle speed: 200-6,000 rpm • Counter spindle motor power: 2.2 kW • C-axis: 360,000° • Spindle nose: for F37 collet • Tools/Stations: • Number of stations: 4 • Number of tools: 20 • Number of driven tools: 5 • Tools for turning: 5 • Tools for drilling: 6 • Tools for cross machining: 4 • Driven tool speed: 200-5,000 rpm • Driven tool power: 0.9 kW • Feed rate: 1-6,000 mm/min • Rapid traverse: 20 m/min • Dimensions (machine, without bar feeder): 2150 × 1500 × 1800 mm Additional equipment: • Bar feeder: IEMCA BOSS 332L • Chip conveyor • Parts catcher Nedpoyq Nwxsfx Abvjcp • Ejector for short parts • Bar puller • Work light • Set of collets • Serial interface RS232 • 3-color status beacon • Documentation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 46.976 h, Steuerungseinheit Marke: FANUC Modell: Serie Oi-TD Zusätzliche Ausstattung 8 kVA Transformator / Spindeldurchblasung / LNS Späneförderer / Schnittstelle für Hochdruck-Kühlschmiersystem mit 4 M-Codes Diese Citizen Miyano GN-3200 wurde 2016 hergestellt. Sie verfügt über eine FANUC 0i-TD Steuerung, einen 8 kVA Transformator, MAS-Schnellwechsel-Werkzeughalter und eine Spannzangenvorrichtung. Zu den weiteren Ausstattungsmerkmalen zählen eine Spindeldurchblasung, ein Werkzeugbruchsensor, eine Blum-Messtaster sowie ein LNS Späneförderer. Eine Schnittstelle für ein Hochdruck-Kühlschmiersystem mit 4 M-Codes ist ebenfalls enthalten. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche Drehen Nsdpfjx D Iq Asx Abvjcp

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, saluran batang: 32 mm, Berikut pekerjaan yang telah dilakukan pada mesin dalam beberapa tahun terakhir: Februari 2022 – Bola sekrup poros X2 diganti dan bantalan diganti Agustus 2022 – Regulator poros X2 diganti September 2023 – Sistem pengukuran / regulator poros Ti diganti Maret 2025 – Sistem pengukuran poros Ti diganti DETAIL TEKNIS Diamater lubang batang: 32mm PERALATAN 10 posisi alat pada revolver dengan sumbu Y untuk pemrosesan sisi depan dan belakang 5 posisi alat sisir 3 posisi alat pada blok bor untuk pemrosesan sisi belakang 4 alat penggerak untuk pemrosesan silang Sumbu C spindel utama Interpolasi milling Kompensasi radius pemotongan Pengeboran ulir sinkron Nodpfoyux N Esx Abvocp Holder ER16

Kondisi: baik (bekas), Tahun pembuatan: 2010, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 26 mm - Travel distance: 240 mm - Spindle speed: 8,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 26 mm - Spindle speed: 6,000 rpm TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm BACKWORKING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 56,433 h EQUIPMENT - Control: Fanuc - Driven tool motorisation - Powered guide bushing - Parts catcher - Parts ejector - Chip conveyor Ncjdpfxeyuyqks Abvsp - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7 - Magazine loader

Kondisi: bekas, Tahun pembuatan: 2019, Swing diameter over bed: 32 mm Spindle bore: 32 mm Control: SIEMENS 840-D-SL Spindle stroke: 220 mm Main spindle speeds: 6000 rpm Spindle motor: 5.5 / 3.7 kW Counter spindle – bore: 32 mm Counter spindle speed range: 8000 rpm Turning length: 220 mm Collets: 1536E Drive motor power: 5.5 / 3.5 kW Total power requirement: 16 kVA Machine weight approx.: 4.3 t Space requirement approx.: 6.40 x 1.60 x 2.10 m MAIER Swiss-type automatic lathe in very good condition, equipped with SIEMENS 840-D-SL 3-channel control, featuring: - 2 pcs. counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 axis and 4 driven tool holders Njdpoytx Skefx Abvscp - Channel 2 – backworking, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Bundle loader for holding a complete bar bundle - Chip conveyor - Electronic handwheel - KNOLL high-pressure unit 50 bar with paper band filtration system - Fire protection system by KRAFT & BAUER - Table for discharging long parts - Discharge system for long parts (flange + tube) - ARTIS tool and process monitoring “Genior Modular – Fully automated tool and process monitoring” The machine can be inspected under power!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 8.300 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 6.400 rpm, Diameter batang (maks.): 32 mm, model controller: TX 8 i-p, panjang benda kerja (maks.): 245 mm, tech-specs-001 Nsdpfx Abeyn Imyjvscp

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Citizen CINCOM M12 – Swiss Type Sliding Headstock Lathe Year of manufacture (machine): 1999 Year of manufacture (bar feeder): 2009 Technical specifications: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Sub-spindle speed: up to 10,000 rpm • Number of axes: 7 (C-axis on both spindles) • Machine weight: 2,580 kg • Control: CNC Cincom / Mitsubishi M6 • C-axis and driven tools – capable of milling, drilling, and threading Equipment: • LNS Tryton 112 bar feeder • Guide bushings • Driven tooling (live tools) • Set of stationary tool holders • No chip conveyor M12 axis arrangement: X1, Y1, Z1, X2, Z2, X3, Z3, C1, C2 Tooling list: Gang tool post: T1-T5 – stationary tools T6-T8 – driven tools (holders included) Turret: T20-T29 – stationary or driven tools, more than one tool can be installed per station Backspindle tool post: T41-T43 – stationary tools, driven tool holders not possible Condition: Ncsdpfx Abeyt D Azjvep The machine is in very good condition, recently serviced and ready for immediate operation. Application: Precision Swiss-type automatic lathe designed for series production of small turned parts from bar stock Ø 1–12 mm. Additional information: • Complete documentation available and possibility of powered demonstration. • Transport and loading can be arranged at buyer’s request.