Beli Mesin cetak injeksi dengan gaya penjepit 1.000 – 4.999 kN bekas (508)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Pengolahan plastik & teknologi plastik Mesin cetak injeksi Mesin cetak injeksi dengan gaya penjepit 1.000 – 4.999 kN
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Wittmann BattenfeldEcoPower 110/350
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Wittmann Battenfeld EcoPower 110/350 / Electric machine / Operating hours: approx. 15,000 in automatic operation
Year of manufacture: 2019
Injection unit:
Screw diameter: 35 mm
Shot weight: 153.8 g
Injection pressure: 2083 bar
Dosage volume: 168 ccm
Clamping unit:
Clamping force: 110 t
Tie bar spacing: 470x420 mm
Platen size: 682x682 mm
Ejector: electric
Clamping system: toggle lever
Control system: UNILOG B8 - Touchscreen
Additional equipment:
Ijdeyli Adepfx Ag Reap
Machine in very good technical condition
All-electric machine: energy-saving and very quiet
Operating hours: approx. 15,000 in automatic mode
Total number of operating hours: 21,800
Euromap 67
Robot interface
Air valve x 1
Hydraulic core pull x 1
Control system with hot runner channels
Injection unit is wear-resistant and corrosion-resistant
Central lubrication
Dimensions:
Weight: 4,800 kg
Length/Width/Height: 4.91x1.42x2.10 m
All machines offered are put into operation by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Wittmann BattenfeldHM 150/750 Servo Power
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode
Year of manufacture: 2014
Injection unit:
Screw diameter: 50 mm
Shot weight: 402.2 g
Injection pressure: 1714 bar
Dosing volume: 442 ccm
Clamping unit:
Clamping force: 150 t
Tie bar spacing: 520x470 mm
Platen size: 760x755 mm
Ejector: hydraulic
Iasdsyliz Hopfx Ag Rep
Clamping unit: hydraulic
Control system: UNILOG B6P - touchscreen
Additional features:
Machine in very good technical condition
Electric machine: energy-efficient and very quiet
Operating hours: approx. 29,000 in automatic mode
Total hours: 36,714
Euromap 67
Robot interface
Air valve x 1
Hydraulic core pull x 1
Injection unit is wear-resistant and corrosion-resistant
Main motor – driven by a servomotor with inverter – energy-saving
Dimensions:
Weight: 6,600 kg
Length/Width/Height: 4.82x1.42x2.20 m
All machines offered are started up by our service technicians before sale.
It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź.
Price: On request
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Wittmann BattenfeldEcoPower 110/350
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Wittmann Battenfeld EcoPower 110/350 with Wittmann W818 Robot / All-Electric Machine / Operating Hours: approx. 16,000 in automatic mode
Year of manufacture: 2017
Injection unit:
Screw diameter: 35 mm
Shot weight: 153.8 g
Injection pressure: 2083 bar
Dosage volume: 169 ccm
Clamping unit:
Clamping force: 110 t
Tie bar spacing: 470x420 mm
Platen size: 680x660 mm
Ejector: electric
Clamping system: toggle
Control: UNILOG B8 - touchscreen
Additional equipment:
Perfect technical condition
All-electric machine: high-speed, energy efficient, and very quiet
Operating hours: approx. 16,000 in automatic mode
Euromap 67 interface
Robot interface
Control with air valve
Hydraulic core pull x 1
Hot runner control
Iajdpeyliz Tsfx Ag Rep
Injection unit is wear-resistant and corrosion-resistant
Central lubrication
Automatic mold height adjustment
Parallel movements
The machine has been serviced in Germany
Wittmann W818 Robot
Year of manufacture: 2015
4-axis robot: 3 axes are servo-driven (electric); C axis - pneumatic
Axis travel distances: X-420, Y-1200, Z-2000 mm
Touch control panel
Robot safety package
Robot with adapter, conveyor belt, and safety housing
Purchase of robot and conveyor at additional cost
Dimensions:
Weight: 4800 kg
L/W/H: 4.91x1.42x2.10 m
All machines offered are commissioned by our service technicians prior to sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź.
Price: On request

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
BattenfeldBA 1300V/315 V-R / Vertikal
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Battenfeld BA 1300V/315 V-R / Vertical Injection Moulding Machine with Rotary Table
Year of manufacture: 1997
Injection unit:
Screw diameter: 40 mm
Shot weight: 182.9 g
Injection pressure: 1,575 bar
Dosing volume: 201 cc
Clamping unit:
Clamping force: 130 t
Tie bar spacing: 454 x 740 mm
Platen size: 815 x 1,010 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: UNILOG 4000
Additional equipment:
Air valve x 5
Hydraulic core pull x 1
Rotary table: 1,250 mm
Vertical injection unit – screw diameter fi 35 mm
Dimensions:
Iodpfxeylizto Ag Rjap
Weight: 7,500 kg
Length/Width/Height: 3.83 x 2.33 x 4.16 m
Drive:
Pump/motor: 18.5 kW
Heating capacity: 8.98 kW
Total power: 27.48 kW
All machines offered are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź.
Price: on request
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Wittmann BattenfeldVM 150/525 R1280 Servo Power
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table
Year of manufacture: 2015
Injection unit:
Screw diameter: 35 mm
Shot weight: 175.6 g
Injection pressure: 2,743 bar
Dosage volume: 193 ccm
Clamping unit:
Clamping force: 150 t
Tie bar distance: 0x0 mm
Platen size: 1280 mm
Ejector: hydraulic
Clamping unit: hydraulic
Iodpfx Agsyliyce Roap
Control system: UNILOG B6
Additional equipment:
Vertical injection moulding machine with rotary table
Hybrid machine: high speed, energy-efficient and very quiet
Air valve x 5
Hydraulic core pull x 1
Control system with hot runner control x 12
Injection unit is wear-resistant and corrosion-resistant
Rotary table diameter: 1,500 mm
Rotary table driven by servomotor, controlled via inverter
Dimensions:
Weight: 11,300 kg
Length/Width/Height: 3.83x1.50x4.07 m
All machines offered are started up by our service technicians prior to sale.
It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź.
Price: Upon request.
Temukan lebih banyak mesin bekas
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
BattenfeldHM 270/1330H/1000H
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode
Year of manufacture: 2006
Injection unit:
Screw diameter: 55 mm
Shot weight: 594 g
Injection pressure: 2041 bar
Dosage volume: 653 ccm
Clamping unit:
Clamping force: 270 t
Tie bar spacing: 710x710 mm
Platen size: 1030x1000 mm
Ejector: hydraulic
Iajdpeylix Sofx Ag Rjp
Clamping unit: hydraulic
Control system: UNILOG B4
Additional equipment:
Machine in very good technical condition
2K machine with parallel-arranged horizontal injection units
Central injection
Operating hours: approx. 10,000 in automatic mode
Total operating hours: 11,876 h
Control system with air valve
Hydraulic core pull x 3
Reinforced injection units – bimetallic
Proportional valves on injection units – precise injection
Parallel movements
Injection unit 1000H
Screw diameter: 50 mm
Shot weight: 446.8 g
Injection pressure: 2016 bar
Dosage volume: 491 ccm
Dimensions:
Weight: 15,000 kg
Length/Width/Height: 6.90x1.78x2.34 m
All offered machines are started and tested by our service technicians before sale.
It is possible to receive a video of the technical inspections of the selected machine or to participate in live technical tests at our facility in Łódź.
Price: On request.
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
BATTENFELDEcoPower SE 300/1330
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Battenfeld EcoPower SE 300/1330 / Electric Machine
Year of manufacture: 2012
Iaedpfeylix Eex Ag Rep
Injection Unit:
Screw diameter: 50 mm
Shot weight: 491.4 g
Injection pressure: 2470 bar
Dosage volume: 540 ccm
Clamping Unit:
Clamping force: 300 t
Tie bar distance: 770x720 mm
Platen size: 1090x1170 mm
Ejector: electric
Clamping unit: toggle lever
Control system: UNILOG B6 – Touchscreen
Additional Equipment:
Electric machine: high-speed, energy-efficient, and very quiet
Machine in very good technical condition
Euromap 67
Robot interface
Air valves x8
Controller with hot runner circuits x6
Injection unit hardened – bimetallic
Parallel movements
It is possible to change the screw diameter to 45, 55, or 65 mm
Dimensions:
Weight: 14,100 kg
Length/Width/Height: 7.20 x 2.04 x 2.20 m
Drive:
Pump/Motor: 0 kW
Heating capacity: 22 kW
Total installed power: 0 kW
All offered machines are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź.
Price: On request
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
BATTENFELDHM 300/2250S
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Battenfeld HM 300/2250S with Wittmann W818 Robot / Machine in excellent technical condition / Operating hours: approx. 40,000 h in automatic mode
Year of manufacture: 2007
Injection Unit:
Iasdpfjylixrox Ag Rop
Screw diameter: 55 mm
Shot weight: 702.5 g
Injection pressure: 2,500 bar
Metering volume: 772 cc
Clamping Unit:
Clamping force: 300 t
Tie bar spacing: 710x630 mm
Platen size: 1030x1020 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: UNILOG B6 - touch panel
Additional equipment:
Machine in excellent technical condition
Euromap 67
Robot interface
Controller with air valve
Hydraulic core pull x 1
Controller with 8 hot runner zones
Injection unit is wear-resistant and corrosion-proof
Proportional valve on the injection unit – precise injection
Machine is fitted with new original screw and barrel
Wittmann W818 Robot
4-axis, high-speed robot: 3 axes driven by servo motors (electric); movement A and C
Touch control panel
Robot with adapter, safety enclosure
Dimensions:
Weight: 13,000 kg
Length/Width/Height: 6.90x1.90x2.40 m
Drive:
Pump/motor: 45 kW
Heating capacity: 22.7 kW
Total power: 67.7 kW
All the offered machines are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to attend live technical tests at our company in Łódź.
Price: On request
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Boy100E
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Boy 100E / Hybrid Machine
Year of Manufacture: 2014
Injection Unit:
Screw Diameter: 32 mm
Injection Weight: 92.3 g
Injection Pressure: 2,127 bar
Metering Volume: 96.5 ccm
Clamping Unit:
Clamping Force: 100 t
Tie Bar Distance: 430x360 mm
Platen Size: 750x650 mm
Ejector: Hydraulic
Clamping Unit: Hydraulic
Control System: Procan Alpha 2 – Touchscreen
Additional Equipment:
Hybrid machine: high-speed, energy-saving, and very quiet
Euromap 67
Robot Interface
Control with air valve
Injection unit hardened – bimetallic
Main motor of the machine – servo motor driven with inverter – energy saving
Dimensions:
Weight: 3,530 kg
Length/Width/Height: 4.37x1.21x2.20 m
Iaedpfx Aoylixfog Rep
Drive:
Pump/Motor: 15 kW
Heating Capacity: 7.7 kW
Total Power: 22.7 kW
All machines offered are started up by our service technicians before sale.
It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Ferromatik MilacronK-TEC 350-2650
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Ferromatik Milacron K-TEC 350-2650 / Production line with Sepro robot
Year of manufacture: 2017
Injection unit:
Screw diameter: 70 mm
Shot weight: 1,104 g
Injection pressure: 2,175 bar
Dosage volume: 1,213 cm³
Clamping unit:
Clamping force: 350 t
Tie bar spacing: 750 x 750 mm
Platen size: 1,110 x 1,165 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control unit: MOSAIC – touchscreen
Additional equipment:
Very good technical condition
High-speed machine
Operating hours: approx. 10,000 h in automatic mode
Euromap 67
Robot interface
Air valve x 5
Hydraulic core pull x 3
Control unit with hot runners
Hardened injection unit – bimetallic
Proportional valve on the injection unit – precise injection
Parallel movements
Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation)
Iasdpfx Agsyliwzo Rjp
Energy-efficient machine – equipped with a system of 3 hydraulic pumps with variable output
Machine has been regularly serviced by authorized service in Germany
Dimensions:
Weight: 22,000 kg
Length/Width/Height: 8.62 x 2.21 x 2.80 m
All offered machines are started up by our service technicians prior to sale.
It is possible to obtain a video of the technical tests of the selected machine, or to participate in live technical tests at our company in Łódź.
Price: On request
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Ferromatik MilacronMagna T(MTs) 150-450
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor and safety enclosure / Machine in very good technical condition
Year of manufacture: 2017
Injection unit:
Screw diameter: 45 mm
Shot weight: 215 g
Injection pressure: 1984 bar
Dosage volume: 226 ccm
Clamping unit:
Clamping force: 150 t
Tie bar spacing: 510x510 mm
Platen size: 740x740 mm
Ejector: hydraulic
Clamping system: toggle
Control system: B&R - touchscreen
Ijdpsyliwuefx Ag Roap
Additional equipment:
Hybrid machine: high-speed, energy-efficient, and very quiet
Operating hours: 11,000 in automatic mode
Euromap 67
Robot interface
Air valve x 1
Hydraulic core pull x 1
Hot runner control unit x 36 (available at extra cost)
Injection unit is wear-resistant and corrosion-resistant
Main motor - servo motor driven by inverter
Central lubrication
Machine with cylinder / battery with compressed nitrogen (additional charge for high-speed operation)
Wemo 6-5 xDesign robot
Year of manufacture: 2017
4-axis robot: 3 axes driven by servo motors (electric)
Robot safety package
Robot with adapter, Wemo WCS-R conveyor, and safety enclosure
Purchase of the robot and conveyor at additional cost
Dimensions:
Weight: 7,500 kg
Length/width/height: 6.10x1.97x2.60 m
Drive:
Pump/motor: 11.5 kW
Heating capacity: 11.3 kW
Total connected load: 22.8 kW
All machines offered are started up by our service engineers prior to sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: EUR 25,000.00 net
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
Ferromatik MilacronK110D-S/2F
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Ferromatik Milacron K110D-S/2F / 2K Injection Moulding Machine
Year of manufacture: 1998
Iasdjyliwnspfx Ag Rep
Injection Unit:
Screw diameter: 30 mm
Shot weight: approx. 85 g
Injection pressure: 2298 bar
Dosage volume: 99 ccm
Clamping Unit:
Clamping force: 110 t
Tie bar distance: 470x470 mm
Platen size: 740x740 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: Ferromatik Milacron
Additional Equipment:
2-component injection moulding machine
Euromap 67
Robot interface
4x hydraulic core pulls
Controller with hot runner interface
Injection unit is wear-resistant and corrosion-resistant
Screw diameter in vertical injection unit: ⌀25 mm – approx. 43 g/PS
The machine has been serviced regularly
Recently, the service center replaced the machine’s cylinder, screw, and hydraulic valves with new ones
Dimensions:
Weight: 6300 kg
Length/Width/Height: 5.00x1.60x3.60 m
All machines offered are started and tested by our service technicians prior to sale.
It is possible to receive a video of the technical tests of the selected machine, or to participate in live technical testing at our facility in Łódź.
Price: On request
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
ShibauraEC280SXIII-i10A
Hubungi
Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Electric Injection Moulding Machine SHIBAURA EC280SXIII-i10A
Manufacturer: Shibaura Machine (formerly Toshiba Machine)
Model: EC280SXIII-i10A
Year of manufacture: 2025
Type: Fully electric injection moulding machine
Shibaura (Toshiba) injection moulding machines are among the most precise machines on the market. The SXIII series is characterised by high accuracy, process stability, and very low energy consumption. This machine is perfectly suited for the production of precision technical components, as well as applications in the automotive, electronics, and medical industries.
Technical Specifications
Clamping Unit
- Clamping force: 2,800 kN
- Platen dimensions: 1,030 × 960 mm
- Tie bar spacing: 730 × 660 mm
- Minimum mould height: 250 mm
- Maximum mould height: 750 mm
- Maximum daylight (mould opening): 1,350 mm
- Maximum ejector stroke: 150 mm
Iedpfx Ageyrr Iio Roap
Injection Unit
- Screw diameter: 50 mm
- Injection volume: 490 cm³
- Shot weight for PS: 450 g
- Injection pressure: 2,040 bar
Electrical Equipment
- Rated motor power: 41.2 kW
- Heater power: 15.9 kW
The machine features fully electric technology, which ensures:
- High process repeatability
- Low energy consumption
- Very quiet operation
- No hydraulic system
Dimensions and Weight
- Net weight: 12.5 t
- Machine dimensions: 6.7 × 2.0 × 2.2 m
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi - mesin cetak injeksi
Arburg420C 1000-150/150 2-Farben 2K
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194573, gaya penjepit: 1.000 kN, Here we offer a well-maintained injection moulding machine.
We are also happy to accept well-kept machines from year of manufacture 2005 onwards as part exchange. Please offer us any machines that will become available from your operations.
Important notice – Tax information and benefit for used machines
From 01.07.2025, used machines are also eligible for a special depreciation of 30% per annum. In addition to the lower purchase price compared to a new machine, you can benefit from the same depreciation rates as with new equipment.
Reference: Growth Booster, (§ 7 Paragraph 2 EStG-E)
Arburg 2-colour injection moulding machine with complete maintenance history, featuring both horizontal and vertical injection units.
Machine No.: 194573
Arburg 420C 1000-150/150
Year of manufacture: 2004
Control system: Selogica
Extras:
- 2x core pull (simultaneous movement, adjustable holding pressure)
- Intermediate stop for hydraulic rotary control
- CF card drive
- Interface for production control
- Interface for dosing unit
- Interface for conveyor belt
- Prepared for Multilift
- Selector unit with connection
- Extended installation height to 350 mm
- Highly wear-resistant screws
- Air blow-off device connection
Iedpfx Aohyumgeg Rjap
- 2-colour / horizontal & vertical unit
- Including disks/CF cards - complete documentation/manuals
Clamping force: 100 tons / 1000 kN
Tie bar spacing: 420 x 420 mm
Mould plates: 570 x 570 mm
Opening stroke: 500 mm
Max. daylight: 850 mm
Mould height: 350 mm
1st Injection unit (150)
Screw: 30 mm (highly wear-resistant)
Shot weight: 65 g
Shot volume: 78 ccm
Injection pressure: 2210 bar
2nd Injection unit (150)
Screw: 25 mm (highly wear-resistant)
Shot weight: 45 g
Shot volume: 54 ccm
Injection pressure: 2500 bar
Weight/Dimensions
Dimensions: 4.63 x 1.3 x 3.9 m (L x W x H)
Weight: 4,000 kg
Connected load: 125 A pre-fuse
Delivery free to buyer’s business address up to the yard – Unloading is the buyer’s responsibility & risk from the truck loading area.
The machine is offered fully tested and functional.
For your information about us and the machines on offer:
- We only sell machines that we have purchased ourselves directly from running production, from our warehouse in Hannover
- All machines undergo inspection and testing prior to dismantling
- We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment
- All machines offered come from successful businesses where maintenance and care are a standard practice
- All machines offered are available for inspection at our warehouse
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
Arburg570C 2000-800
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 53.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 206432, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, jarak antara tiang: 570 mm, volume langkah: 392 cm³, tekanan injeksi: 2.000 batang, lintasan ejektor: 225 mm, berat keseluruhan: 7.450 kg, Perlengkapan: dokumentasi / manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine for sale:
Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards.
We have been wholesalers of used injection moulding machines for more than 25 years.
Current note – Tax advisory and benefit for used machinery
As of 01/07/2025, used machinery is also eligible for a special depreciation allowance of 30% per annum for tax purposes.
Manufacturer: Arburg
Model: 520C 2000-800 GE
Serial number: 206432
Year of manufacture: 2007
Operating hours: approx. 53,000
Control system: Selogica
Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m
Weight: 7,450 kg
Fully functional
Condition: Very well-maintained – German origin
Extras:
- Complete high-wear resistant thermoplastic injection unit, 50 mm
- Screw in HC (high corrosion) version instead of standard
- Selogica direct control
- Hydraulic system with 2 variable-displacement pumps
- Anniversary model GOLDEN EDITION
- Thermoplastics processing
- Open nozzle, 50 mm
- Extended nozzle tip, 50 mm
- Heating band for open nozzle
- Heating band for extended nozzle tip
- Central clamping plate set, 570 mm, central ⌀ 125 mm
- 2x air eject systems with pressure regulator
- Air eject connection 1
- Selector unit connection
- 1 core pull for serial movement, holding pressure via check valve
- Conveyor belt connection via 5-pin socket
- Robot interface (to EUROMAP 67 standard), 50-pin
- Central computer interface ARBURG
- Additional socket distributor: 1 CEE, 1 Schuko
- Serial printer interface, USB
- CompactFlash interface for data storage
- Operator authorization via chip card according to EUROMAP 65
- 1 additional heating control circuit for nozzle or adapter with socket
- Colour dosing unit interface
- Manually adjustable cooling circuits
- Machine-related cooling circuits regulated
- Advanced monitoring equipment package
- Advanced movement package
- Production control equipment package
- Optimization/operation support package
- Quality assurance equipment package
- Documentation equipment package
Complete documentation included
Injection unit:
- Screw diameter: 50 mm
- Shot weight: 359 g/PS
- Injection pressure: 2000 bar
- Injection volume: 392 cm³
Clamping unit:
- Clamping force: 200 tons / 2000 kN
- Tie bar distance: 570 x 570 mm
- Mounting platen: 795 x 795 mm
Iajdew Tt R Ijpfx Ag Rjp
- Minimum mould height: 300 mm
- Maximum platen distance: 950 mm
- Opening stroke: 650 mm
- Ejector stroke/force: 225 mm / 66 kN
- Hydraulic clamping unit
Drive capacity: 22 kW
Heating capacity: 19.9 kW / 8 heating zones
Total connected load: 45 kW
The machine is immediately available at our warehouse in Hannover, Germany and has been tested.
Warranty:
Warranty valid until initial commissioning
Loading/Shipping:
Loaded free onto buyer’s truck or delivered free to destination against freight charge
Available from our Hannover/Germany warehouse
Information regarding the machines we offer and our company:
- We only sell our own stock, machines purchased from ongoing production, available from our Hanover warehouse
- All machines offered are inspected and tested prior to dismantling
- We do NOT sell insolvency assets – we are NOT brokers dealing in third-party equipment
- All machines offered come from reputable companies with consistent maintenance and care
- All machines offered can be inspected at our warehouse
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
Arburg420C 1300-350
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2001, jam operasional: 56.380 h, nomor mesin/kendaraan: 184172, used injection molding machine
The machine comes with a complete service history, including all significant repairs and component replacements, such as hoses, etc.
Manufacturer: Arburg
Model: 420C 1300-350
Year of manufacture: 2001
Machine No.: 184172
Control system: Selogica
Operating hours: 56,380 h
Isdevimd Nepfx Ag Rsap
Regular maintenance by manufacturer
Clamping unit
Clamping force: 1300 kN / 130 tons
Tie bar distance: 420 x 420 mm
Platen size: 570 x 570 mm
Ejector stroke: 175 mm / 40 kN
Opening stroke: 500 mm
Mould installation height: 250 mm
Max. platen distance: 750 mm
Injection unit
Injection volume: 145 cm³
Shot weight: 127 g
Screw diameter: 35 mm
Injection pressure: 2500 bar
Extras:
- Hydraulic core pull
Available immediately from our warehouse in Hanover, loaded onto truck or delivered to your facility with freight charges paid by buyer
- Function-tested (guaranteed function up to first commissioning)
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
Arburg720S 3200-2100 neue Pumpe, Motor, etc.
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 199107, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we also purchase well-kept injection moulding machines from model year 2010 onwards.
We have been wholesalers of used injection moulding machines for over 25 years.
Current information – Tax advice and benefit for used machinery:
From 01.07.2025, used machines will also be eligible for a special depreciation allowance of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine.
Keyword: Growth Booster (§ 7 para. 2 EStG-E)
Iaedpslc R Rxofx Ag Rop
Manufacturer: Arburg
Model: 720S 3200-2100
Control unit: Selogica
Year of manufacture: 2005
Machine number: 199107
Special features/Condition:
- Pump replaced
- New hydraulic motor in 2019
- Injection unit sealed
Serviced regularly by manufacturer and previous owner.
Extras:
- 2 x core pulls
- Robot interface
- Machine data sheet available on request
- Complete documentation and software available
- German language
- Single ownership – origin Germany
Clamping unit:
- Clamping force: 3200 kN / 320 t
- Tie bar distance: 720 x 720 mm
- Platen size (h): 1040 mm x 1040 mm
- Min. mould height: 300 mm
- Max. mould height: 700 mm
- Max. daylight: 1400 mm
- Opening stroke: 700 mm
- Ejector stroke: 250 mm
- Ejector force: 100 kN
- Movable platen centering diameter: 165 mm
- Fixed platen centering diameter: 165 mm
- Max. mould weight: 3600 kg
Injection unit:
- Screw diameter: 70 mm
- Shot weight in polystyrene: 984 g/PS
Available immediately from our warehouse in Hannover, Germany or delivered free domicile against reimbursement of freight charges.
The machine is offered after functional testing. The machine is our sole property. The requested machine is immediately available in our Hannover warehouse, will be function-tested, and can be inspected under power.
More information on our machines and our company:
- We only sell our own machines, acquired from ongoing production, from our Hannover warehouse.
- All machines offered are checked and tested before dismantling.
- We do NOT sell insolvency goods – we are NOT brokers dealing in third-party property.
- All machines offered come from successful companies for which maintenance and care are a matter of course.
- All machines offered are available for inspection at our warehouse.
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
Arburg470C 1500-350 mit 2 zusätzl Spritzeinh.
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 30.665 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 196184, gaya penjepit: 1.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 470 mm, Perlengkapan: dokumentasi / manual, Here we are offering, as injection molding machine dealers, the following well-maintained pre-owned injection molding machine for sale.
Of course, we are also interested in purchasing well-maintained injection molding machines from model year 2010 and newer.
We have been wholesalers of used injection molding machines for over 25 years.
Important current note – Tax advantage for used machinery:
From 01.07.2025, used machines can also benefit from a special depreciation of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new purchase.
Reference: Growth Booster (§ 7 paragraph 2 EStG-E)
Used Injection Molding Machine with 2 additional injection units (25 mm and 35 mm)
Currently fitted with 50 mm injection unit
See document available for download.
Manufacturer: Arburg
Model: 470C 1500-350
Year of Manufacture: 11/2004
Machine No.: 196184
Control System: Selogica
Operating Hours: 30,665 h
Regular maintenance carried out by the manufacturer
Clamping Unit
Clamping Force: 1,500 kN / 150 tons
Tie Bar Spacing: 470 x 470 mm
Platen Size: 650 x 650 mm
Ejector Stroke: 175 mm
Opening Stroke: 500 mm
Mold Installation Height: 250 mm
Maximum Distance Between Platens: 750 mm
Injection Unit (50 mm, highly wear-resistant)
Injection Volume: 392 ccm
Shot Weight: 359 g
Screw Diameter: 50 mm
Injection Pressure: 1,670 bar
Extras
- 2 additional injection units: 25 mm and 30 mm
- 1x core pull
- Conveyor belt in the machine base
- Handling interface
- Geiger part removal unit
- Selector unit
- 2x air blow-off
- Accumulator for fast injection
- Electrical/pneumatic interface for shut-off nozzle
- Technology level 2 servocontrolled variable output pumps
- 9 electric heating circuits
- Interface for mold temperature control unit
- Interface for coloring device
- Equipment package
- Extended monitoring
- Extended axis movement controls
- Production management
- Optimization / operator aids
Iodpfsw Rm Hdsx Ag Rjap
- Quality assurance
- Documentation
Visibly attached peripheral devices not explicitly listed are not included in the scope of supply.
- Available immediately from our warehouse in Hanover, either ex works (loaded) or delivered (shipping charges apply)
- Fully function-tested (performance guaranteed up to initial commissioning)
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
Arburg420C 1000-150/150/60 3-Farben 21.200 h
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 21.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190332, Perlengkapan: dokumentasi / manual, From July 1, 2025, used machines can also be taken into account for tax purposes with a special depreciation of 30% per year.
3-color or 2-color injection molding machine (the 3rd unit can be deactivated via software)
(horizontal/vertical, plus 3rd in L-position with safety enclosure)
##### Can also be converted to 2-color operation #####
Immediately available from our Hannover warehouse
Manufacturer: Arburg
Model: 420C 1000-150/150/60
Year of manufacture: 2003
Iodpjgrzh Esfx Ag Rjap
Machine number: 190332
Controller: Selogica
Operating hours: only 21,200 h
+++++Clamping unit+++++
Control: Selogica
Clamping force: 1,000 kN / 100 tons
Tie bar spacing: 420 x 420 mm
Mounting platen: 795 x 795 mm
Mold height: 300 mm
Max platen distance: 950 mm
Ejector stroke / force: 225 mm / 66 kN
Clamping unit: hydraulic
++++Injection unit 1 (150 assembly)++++
Screw diameter: 15 mm (highly wear-resistant)
Shot volume: 17 ccm
Shot weight: 15 g
Injection pressure: 2,750 bar
++++Injection unit 2 (150 assembly)++++
Screw diameter: 15 mm (highly wear-resistant)
Shot volume: 17 ccm
Shot weight: 15 g
Injection pressure: 2,750 bar
++++Injection unit 3 (60 assembly)++++
Screw diameter: 15 mm (highly wear-resistant)
Shot volume: 17 ccm
Shot weight: 15 g
Injection pressure: 2,080 bar
Extras
1 ALLROUNDER 420 C 1000-150/150/60
1 Vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping rails, manually operated, working position adjustable between 70 and 250 mm VE-404/02
2 x core pull
1 open nozzle 15 mm, wear-resistant, without heating band (1st inject. unit 150) VE-902/00
1 Technology level 2 – servo-controlled hydraulic system with two variable pumps for controlled machine movements, with position-dependent, controlled target ramps. Build-up of mold clamp force is programmable and regulated. The clamp force is servo-controlled by the second pump. Set-up force for the nozzle assembly is programmable. The set-up force is manually adjustable and electronically maintained.
1 Technology level 3 hydraulic system with 3 variable pumps for simultaneous movements of main axes and faster movements of secondary axes. For 2-component machines, as hydraulic system for the 2nd injection unit (requires technology level 2, VE 132/03) VE-130/40
1 Heating band for open nozzle VE-320/00
1 Injection unit 150 for vertical injection into parting line with 2-component processing VE-136/02
1 Position-controlled screw with control valve at injection unit, incl. controlled back pressure, nozzle set-up force manually adjustable VE-561/20
1 Position-controlled screw with control valve for multi-component machines – for injection unit 2 VE-561/30
1 Injection unit 60 for horizontal injection into the parting line as the 3rd injection unit for multi-component processing (L-position) VE-906/00
1 for VE 906/00 - Injection unit 60 in L-position: assembly lowered by 70 mm, incl. special parting level full safety guard VE-907/00
1 Plasticizing cylinder kit 15 mm (without nozzle), with pre-positioned feeder and pressure reducing valve, in highly wear-resistant design with sintered metal check valve, (L-position) VE-908/00
1 Open nozzle 15 mm, wear-resistant, without heating band (L-position) VE-909/00
1 Nozzle tip with radius 15 (L-position) VE-910/00
1 Heating band for open nozzle (L-position) VE-911/00
1 Position-controlled screw for the third injection unit
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
Arburg470C 1500-350 (3 Spritzeinheiten)
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, jam operasional: 30.665 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 196184, gaya penjepit: 1.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 470 mm, Perlengkapan: dokumentasi / manual, used injection moulding machine – with 3 interchangeable injection units (25, 35 and 50 mm)
currently fitted with 50 mm unit
with Geiger part removal device and internal conveyor belt
From active German production, fully functional
See document available for download
Manufacturer: Arburg
Model: 470C 1500-350
Year of manufacture: 11/2004
Machine number: 196184
Control system: Selogica
Operating hours: 30,665 h
Continuous maintenance by manufacturer
Clamping unit
Clamping force: 1500 kN / 150 tons
Tie bar spacing: 470 x 470 mm
Platen dimensions: 650 x 650 mm
Ejector stroke: 175 mm
Opening stroke: 500 mm
Mould installation height: 250 mm
Max. daylight between platens: 750 mm
Injection unit 50 mm
Injection volume: 392 cm³
Shot weight: 350 g
Screw diameter: 50 mm
Injection pressure: 1670 bar
Alternative 25 mm and 35 mm injection units included in delivery
Iasdpfxovhb Iyj Ag Rsp
Extras:
Geiger picker
Handling interface
2x air blow-off
Accumulator for fast injection
9 electric heating control zones
4 spare cooling circuits
Equipment packages
- Extended monitoring
- Extended movement functions
- Production control
- Optimisation / operator aids
- Quality assurance
- Documentation
Electric conveyor belt
Sorting unit
German language – complete documentation – software
- Immediately available from our warehouse in Hanover, free loaded or delivered free to destination against freight reimbursement
- Function tested (guaranteed functionality until initial commissioning)
Iklan kecil
Trenčianske Stankovce
10.519 km
Engel Sieg 1050/160 tech (2012)
Engelvictory 1050/160 tech
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, gaya penjepit: 160 kN, Clamping force: 160 t
Screw diameter: 45 mm
Type: Horizontal
Iaedjx Up T Nepfx Ag Rjp
Drive: Hydraulic
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Pegnitz
10.971 km
Mesin cetak injeksi hingga 5000 KN
DemagDemag ergotech 200/560-1450 System, 2004
Hubungi
Kondisi: bekas, Tahun pembuatan: 2004, gaya penjepit: 200 kN, volume langkah: 763 cm³, tekanan injeksi: 1.905 batang, berat keseluruhan: 10.600 kg, diameter konveyor sekrup: 60 mm, Dasar Pengiriman: ex lokasi
Waktu Pengiriman: sesuai kesepakatan
Ijdpoylz Apjfx Ag Rjap
Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan
Iklan kecil
Pegnitz
10.971 km
Mesin cetak injeksi hingga 5000 KN
DemagDemag ergotech 150/500-610 System, 2003
Hubungi
Kondisi: bekas, Tahun pembuatan: 2003, gaya penjepit: 150 kN, volume langkah: 399 cm³, tekanan injeksi: 1.598 batang, berat keseluruhan: 7.500 kg, diameter konveyor sekrup: 50 mm, Dasar Pengiriman: ex lokasi
Isdpfeylz Aiex Ag Roap
Waktu Pengiriman: sesuai kesepakatan
Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan
Iklan kecil
Trenčianske Stankovce
10.519 km
Arburg 420C 1000-290 (2014) e2
Arburg420 C 1000-290
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Arburg 420C 1000-290 (2014) e2
Iaodpfx Agoxdl H Io Rep
Gaya penutup: 100 t
Diameter sekrup: 25 mm
Berat injeksi: 54 g
Jarak antar kolom V: 420 mm
Jarak antar kolom H: 420 mm
Volume injeksi: 59 cm3
Tipe: Horizontal
Penggerak: Hidrolik
Iklan kecil
Pegnitz
10.971 km
Mesin cetak injeksi - Sepenuhnya elektrik
ArburgArburg 470H 1000-400 Hidrive inkl. Multilift H, 2012
Hubungi
Kondisi: bekas, Tahun pembuatan: 2012, gaya penjepit: 100 kN, volume langkah: 201 cm³, tekanan injeksi: 2.000 batang, berat keseluruhan: 5.400 kg, jam kerja: 55.400 h, diameter konveyor sekrup: 40 mm, Dasar Pengiriman: ex lokasi
Isdpfx Asylpy Asg Rjap
Waktu Pengiriman: sesuai kesepakatan
Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan
Kami memudahkan pencarian untuk Anda
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Mesin cetak injeksi dengan gaya penjepit 1.000 – 4.999 kN (508)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan






















































































































































































































































