Kondisi: bekas, Tahun pembuatan: 2018, Overview The packer was manufactured and commissioned in 2018 by the German company Sema Maschinenbau GmbH. Until now, it has been used in a filling line for fresh milk in glass bottles at a German dairy plant. The line’s capacity was 7,700 bottles per hour. Due to increased demand for milk in glass bottles in recent years, the owner decided to purchase a new system with a higher capacity. Therefore, this machine has become available. The machine is in very good condition, as it is relatively new and has only a low number of operating hours. Technical Data: Performance: 695 crates (with 12 bottles each) per hour 1333 crates (with 6 bottles each) per hour Formation: 2x3 (1L bottles) Rodpel Hx Dmsfx Abusbt 4x6 (0.5L bottles) Gripper heads: for wide-neck bottles (adjustable if needed)

Kondisi: bekas, Tahun pembuatan: 2021, Overview The Filler + Capper Block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and is capable of filling chemical products into plastic containers. The machine features ATEX certification, allowing it to process explosive products. The machine can be purchased with a warranty. Technical Data Fully automatic rotary filler Filling system: Mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 Maximum container dimensions: - Height: 50–300 mm - Diameter: 20–100 mm Pressurized supply tank for constant flow rate via flow meter Subsurface filling to prevent foam formation during filling process Adjustable bottle neck centering Electronic fill level detection CIP-compatible Designed for dip tube processing Rsdpfxomk I Dto Abusbt Fully automatic rotary capper Number of capping heads: 5, with torque adjustment via slip clutches Fully automatic cap sorting and cap feeding using BONINO disc sorter with elevator Gravity chute switch for automatic machine stop in case of cap absence Cap bunker Cap presence control

Kondisi: bekas, Tahun pembuatan: 1993, Overview The triblock consists of a rinser, filler, and capper, manufactured by Sasib/Sarcmi in 1993. It is an isobaric machine designed for the production of still and carbonated water or CSD. Technical Details Capacity: 22,000 bph Bottle formats: PET 0.45l & 0.66l Closure type: PCO 1881 plastic screw cap Number of rinser stations: 90 Number of filling stations: 90 Number of capping stations (AROL capper): 15 Rinser with integrated recirculation system Filling with differential pressure system Rbodpfx Asn Ek Nijbuet Filler equipped with quick-change star couplers for format changeovers Capper with fast format changeover Original mechanical filling valves by Simonazzi Control upgraded to Siemens S7 E300 PLC Cap hopper not included

Kondisi: bekas, Tahun pembuatan: 2004, Overview The swing top capper was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time. Technical Data Capacity: 12,000 bottles/h Formats: 0.33 l (Steinie bottle) 14 capping stations Operation direction: left - right Touch panel for operation Control system: Siemens S7 Rbedpeqqz T Refx Abuet

Kondisi: bekas, Tahun pembuatan: 2007, Overview The machine was built in 2007 by the Spanish company Seppelec. The machine is still assembled but no longer in operation, as the plant has ceased production. Prior to decommissioning, the machine underwent intensive maintenance and was tested with phosphorescent material. Technical Details Capacity: 13,500 l/h Pressure to prevent degassing: 7 bar Temperature during pasteurization: 85°C Machine Documentation Heat exchanger plate | SPX Flow | H17 | 2013 Control system: Siemens S7-300 Cpu 314 2dp Rjdpfx Abjq T Ak Houobt Communication interface type: Profibus

Kondisi: bekas, Tahun pembuatan: 2012, Overview The filler was manufactured in 2012 by the Italian producer Framax. The filler comes with a Framax labelling machine. Both machines have been serviced regularly and are already dismantled. Personal inspection of the machines is possible. Technical Details Capacity: 1,800 bottles/hour (max. 2,200 bottles/hour) Processed format: 0.33 L Closure type: crown cap Filling Monoblock | Framax | RFC-09/08/1-C 2K A/P | 2012 - Rinser positions: 9 Redpfx Absrlf Tqjusbt - Filler positions: 8 - Capper positions: 1 - Suitable for natural beer - Valve type: EVO2 (15 mm) - Max. bottle diameter: 115 mm - Min./max. bottle height: 200 mm / 350 mm - Dimensions: - Length: 4,500 mm - Width: 1,250 mm - Height: 2,500 mm Self-adhesive Labeller | Framax | LLACRSQ VAR STEP 3 - Label positions: front, back, neck - Dimensions: - Length: 2,700 mm - Width: 1,200 mm - Height: 1,700 mm

Kondisi: bekas, Tahun pembuatan: 2019, Overview The fully-automatic shrink hood applicator MSK381 was manufactured by a German OEM in 2019. It was used by a German mineral water producer for packaging PET bottles in shrink trays on Euro pallets and half pallets/DD pallets. The machine is still in operation and can be inspected during running production. Technical details Output 60 pallets/hour (Euro) 92 pallets/hour (DD) Formats Euro pallet DD pallet Scope of delivery Operator panel - HMI Conveyor system as per layout Hood station Shrink frame with gas burners Rbodpor R Rd Iofx Abujt

Kondisi: bekas, Tahun pembuatan: 2007, Overview This wrap-around carton packaging machine was built in 2007 by the Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling plant. The entire line has been dismantled and sold as individual machines. The WA packer is properly dismantled and stored. Technical Data Capacity: up to 60 packs per minute Last packed: 3x4 cartons, 4x6 cartons, 0.5 L glass bottles, 0.33 L glass bottles Other formats possible. Rjdpfx Abetq Dzhsuobt

Kondisi: bekas, Tahun pembuatan: 2020, Overview This lauter tun was manufactured by INOXDUBRA in Spain in 2020. This fully functional lauter tun is in good condition and free from defects (e.g., dents). With a capacity of 10,000 liters, it is ideally suited for filtering 5,000 - 8,000 liters of wort. It is currently in operation at the owner’s facility and is being sold due to investment in new production equipment. Components: Filter floor Cutting mechanism Motor, gearbox with variable speed drive Automatic guillotine valve for spent grain discharge Top opening CE certification and tank drawings. Rbedotq Dzpopfx Abujt

Kondisi: bekas, Tahun pembuatan: 1995, Overview The bottle washing machine “Sirio 7” from the German manufacturer MAG was built in 1995. Maintenance has been carried out regularly by MAG. The machine can be inspected and tested in person. Technical details - Capacity: up to 7,000 bottles/hour - Bottle cells suitable for 1.0-litre bottles (smaller bottles can also be processed; additional insertion plates required) - Bottle diameter: 78 – 90 mm - Bottle height: 288 – 310 mm - Number of bottle cells per row: 10 - Dimensions (L x W x H): 7,880 mm x 3,045 mm x 3,325 mm - Empty weight: 14,300 kg Rbodotrbrqepfx Abuet - Full load weight: 25,600 kg - Installed power: 20.85 kW - Heating system: Steam, 3 bar

Kondisi: bekas, Tahun pembuatan: 2002, Overview The cup filling line was built in 2002 by SIG HAMBA, is still operational until the end of 2024, and can be inspected at any time. Technical Data Capacity: 7,200 – 19,200 containers/h Cup formats: Cup diameter: 95 mm Max. height: 140 mm Filling ranges: Doser 20 ccm to 200 ccm filling Doser 200 ccm to 500 ccm filling Space for additional unit Rsdpfx Abot Uw E Rsuebt Sealing: Film and snap-on lids Control system: Siemens S7 Scope of Delivery Filling machine | SIG HAMBA | BK 8008 P | 2002 Cup denester | Schäfer und Flottmann | SFS 337 | 2002 Empty cup conveyor | Manex | - | 2002 Packer | AF | - | 2002 Integrated into SIG HAMBA BK 8008 P line Well-maintained condition Full cup conveyor | Manex, Sema | Manex Elevator | 2002 Layer palletizer | Manex | - | 2002

Kondisi: bekas, Tahun pembuatan: 2013, Overview The Heuft InLine IR – High-Speed Empty Bottle Inspector is distinguished by its compact installation dimensions. High-speed inspection of empty bottles is easily achievable (up to 50,000 bottles/h). It is capable of performing all standard inspections (sidewall inspection, infeed inspection, finish inspection, base inspection, outfeed inspection, HF caustic and IR residual liquid detection). Additionally, it features a separate module for foreign bottle detection (height, contour, color). In 2016, it was overhauled and modified, including the integration of conveyor control. Technical Data: - Capacity: 5,000 – 50,000 bottles / h - Compact installation dimensions - Overhauled and modified in 2016 Rbedpfx Aoukafrsbuet Features: - Performs all standard inspections: sidewall, infeed, finish, base, outfeed, HF caustic, and IR residual liquid detection - Separate module for foreign bottle detection (height, contour, color)

Kondisi: bekas, Tahun pembuatan: 1999, Overview The vacuum filler 'Sensometic' was manufactured by Krones in 1999. The package also includes a rinser, an Alcoa capper, and an integrated cold glue labelling machine. The equipment can be inspected at any time. Technical Specifications - Capacity: - 12,000 bottles/hour with 0.7l glass bottles - 10,000 bottles/hour with 1.0l glass bottles - 6,000 bottles/hour with 1.5l PET bottles - Formats: - 0.7l glass bottle - 1.0l glass bottle - 1.5l PET bottle - Closures: - Plastic screw cap, 28 mm - Press-on cap Rbodpfx Aoukkvnsbujt - Labelling: - Body, back, neck loop, neck ring - Products Filled: - Raspberry and various fruit syrups - Special 'Hesperides' vinegar - Filling temperature: 25°C - Conveyor direction: left to right - Siemens S5 controller Scope of supply - Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air - Vacuum filler | Krones | Sensometic - Capper | Alcoa | PP 10 / 360 - Capper | Alcoa | K 10 / 360 - Cold glue labeller | Krones | Prontomatic

Kondisi: bekas, Tahun pembuatan: 2012, overview-this-craft-brewery-recently-had-to-cease-operations-ori ginally-the-plan-was-to-continue-brewing-but-since-this-was-no-lo nger-possible-for-various-reasons-the-entire-equipment-is-now-bei ng-sold-as-a-complete-package-equipment-steam-generator-with-gas- oil-burner-and-associated-tank-three-phase-mill-for-milling-grain -800-liter-brewhouse-with-steam-jacket-consisting-of-kettle-laute r-tun-lungs-flotation-tank-tube-cooler-tank-for-osmotic-water-and -three-operational-pumps-industrial-osmosis-and-decalcification-s ystems-four-atmospheric-cylindroconical-fermenters-with-cooling-j acket-capacity-1000-litres-three-atmospheric-cylindroconical-ferm enters-with-cooling-jacket-capacity-1300-litres-one-cooling-syste m-for-fermenters-with-temperature-control-panel-plc-one-cleaning- pump-one-transfer-pump-various-hoses-required-for-transfer-and-pa ckaging-one-atmospheric-monoblock-rinsing-filling-capping-machine -for-33-cl-bottles-with-a-filling-capacity-of-1200-containers-hou r-two-compressors-required-for-operating-the-filling-machine-one- manual-6-head-filling-machine-for-emergencies-and-specialty-bottl es-semi-automatic-adhesive-labelling-machine-one-compressor-requi red-for-the-labelling-machine-thermal-transfer-printer-for-adding -variables-to-labels-with-rewinder-one-pallet-jack-cold-storage-c hamber-6m-x-2-50m-x-3m-industrial-scale-including-all-sandwich-pa nels-used-in-the-construction-of-the-production-rooms Redpfx Asuzpipobusbt

Kondisi: bekas, Tahun pembuatan: 2008, Overview  This grape destemming and crushing machine, model BETA160R, was manufactured by VEMA/ITALCOM. With a throughput capacity of 16 tons per hour, it is ideal for processing large quantities of grapes (particularly green grapes). The machine has already been disassembled and stored and can be inspected upon request. Technical specifications  Capacity: 16 tons/hour Power supply: 200V Rated power: 3.3 kW Weight: 320 kg Rbedpou Emgmofx Abuet

Kondisi: bekas, Tahun pembuatan: 2007, enoveneta-top-15-grape-destemming-and-crushing-machine-overview- the-enoveneta-top-15-is-a-grape-destemming-and-crushing-machine-s pecifically-designed-for-use-in-wine-production-it-offers-a-capac ity-of-15-16-tons-per-hour-with-a-robust-design-made-from-aisi-30 4-stainless-steel-this-machine-is-being-offered-for-sale-due-to-l ack-of-use-by-the-owner-and-is-in-good-condition-technical-detail s-capacity-15-16-tons-hour-power-supply-standard-voltage-400-3-50 -motor-output-destemmer-2-2-kw-motorized-screw-0-55-kw-weight-300 -kg-dimensions-length-2700-mm-width-1000-mm-height-1500-mm-aisi-3 04-stainless-steel-frame-on-castors-perforated-aisi-304-stainless -steel-cylinder-with-apertures-available-in-25-22-22-22-or-22-18- functionality-destemming-separation-of-grapes-from-stems-via-perf orated-cylinder-crushing-adjustable-beater-bar-for-gentle-process ing-detachable-beater-bar-and-cylinder-for-easy-cleaning-juice-ex traction-integrated-juice-drainage-system-speed-control-variator- for-dosing-screw-and-destemmer-accessories-open-lid-with-removabl e-beater-bar-and-cylinder-electric-control-panel Rbjdeu Tyzqjpfx Abuot

Kondisi: bekas, Tahun pembuatan: 1995, Overview This bottle washing machine was manufactured in 1995 by Swiss producer PAC. The machine has been removed from production and can be inspected in person at our warehouse. Technical Details Capacity: 6,000 bottles/hour Min/Max: 3,000 bottles/h - 6,300 bottles/h Bottle types: 0.5L, Euro, NRW, incl. change parts for 330ml Vichy bottles Bottles per row: 12 Bottles inside the machine: 1,080 Bottle cell carriers: 96 Dimensions: Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3.6 m³/h Heat consumption at 80°C: 480 kJ/h x 1000 Electrical consumption: 11 kW Includes spare parts: Motors for front and rear drive Bottle cell carriers Wear parts Machine body entirely made of stainless steel All hot zones with 5 cm insulation Belt for label removal Rbodovl Huaepfx Abuet Stainless steel heat exchanger for low-pressure steam 116°C-120°C at 0.7 – 1 bar Self-cleaning stainless steel spray pipes

Kondisi: bekas, Tahun pembuatan: 2017, Overview This semi-automatic new glass unloader was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be inspected in person at any time. Technical Details Semi-automatic new glass unloader with interchangeable gripper units 4 heads: adjustable according to layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER Rbodpfx Ajvtpc Aebuot

Kondisi: bekas, Tahun pembuatan: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for reusable glass bottles was previously used for filling beer in a brewery in southern Germany. Technical Data Capacity: 7,800 bottles/hour Products: Beer and KEG Formats: NRW 0.5 l, 0.33 l, Ring-neck 0.25 l LN Machine List Machine type: Depalletizer Manufacturer: BMS Year of manufacture: 2012 Machine type: Decapper (screw cap) Manufacturer: Rink Decapping in crate Euro 0.5 l in 4x5 crate Year of manufacture: 2012 Machine type: Bottle washer Manufacturer: Gera Year of manufacture: 2024 Machine type: Empty bottle inspector Manufacturer: Krones Model: Smarttronic Incl. pusher Year of manufacture: 2012 Machine type: Filler Manufacturer: Kosme Model: Isofill G 28/960, 28 valves Year of manufacture: 2012 Rjdpjyb Sbuofx Abuobt With combi capper, 4 heads (crown cork and screw cap) Capacity: 7,800 bph Machine type: Labelling machine Manufacturer: Krones Model: Robusta Overhauled in 2012 10 bottle plates 2 labelling stations with 4 grippers and 4 glue pallets Inkjet printer Machine type: Packer Manufacturer: BMS Year of manufacture: 2012

Kondisi: bekas, Tahun pembuatan: 2014, 4521e5f0 Redpfx Absyb Sm Deuebt

Kondisi: bekas, Tahun pembuatan: 2013, octopus-1825b-haloila-2013 Rodpfxoyb Stwj Abusbt

Kondisi: bekas, Tahun pembuatan: 2018, overview This counter-pressure filling line was manufactured in 2018 by the German company Leibinger; the labeling system was added in 2020 by ENOS. The system comprises a 12-head filler with a 4-head crown capper, an ENOS C5000 labeling machine, and additional packaging equipment. It is designed for beer and other carbonated beverages, providing a complete solution from filling, labeling, to carton sealing. The machines are immediately available. Redpfxjyb S S He Abusbt Technical Data Leibinger Filling and Capping Machine (2018) - Capacity: up to 3,000 bottles/hour (330 ml) - Filling system: 12 counter-pressure long-tube valves - Capping system: 4-head crown capper (26 mm) - Bottle format: 0.33 l (preset) - Working pressure: 2.0 – 2.2 bar - Working temperature: 0 – 4 °C (optimal) - Oxygen pickup: 10–12 ppb dissolved oxygen - Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump - Product pump: Included - CIP system: Automatic and programmable - Machine direction: Left to right - Construction: Stainless steel AISI 316L - Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz

Kondisi: bekas, Tahun pembuatan: 2011, 01 Rbodpfx Abjyb Td Reujt

Kondisi: bekas, Tahun pembuatan: 2013, 0001 Rbodeyb Thvepfx Abuot

Kondisi: bekas, Tahun pembuatan: 2004, summary This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several renowned European manufacturers, primarily Klann, Klinger, Krones, Nate, and Datz. The system is designed for high-performance beverage production and processes up to 20,000 bottles per hour in various formats. It includes all components from depalletizer to packer. The line is in good condition for its age. The labelling machine was fully serviced in 2023. The line remains installed and connected, and can be inspected upon request. Technical Data Redpoyb R Uasfx Abuebt Capacity: up to 20,000 bph Bottle formats: 0.25 L Vichy, 0.5 L Set 1-3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediately Status: Still installed and connected Scope of Supply Depalletizer | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing unit Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | Glass bottles, without capper Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left-right working direction Swing top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing top closure Labelling machine | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Packer | Otto Fleischer | 1993 | ROTA 1 E, automatic collection packer