Beli Mesin percetakan & mesin cetak lainnya bekas (121)

Tahun pembuatan: 2006, Kondisi: bekas, Cross Stacker Gaemmerler KL 540 with Integrated Blocker VM 500 The KL 540 Cross Stacker operates using the proven LiftPack technology. The KL 540 is used for package heights up to 300 mm. Condition: cleaned and ready for operation Technical Data: Cycle Time: Nljdpfxeh Nrh Ue Alkoa ≥ 1.5 sec (depending on product) ≥ 1.2 sec with servo ejector (depending on product) Number of Pages: 4 – 96 (heatset / gravure) Formats: A: 105 – 330 mm (105 – 310 mm with longitudinal ejector) B: 140 – 500 mm D: max. 560 mm Layer Height: max. 200 mm Stack Height: max. 300 mm Weight: approx. 1,500 kg Blocker Gaemmerler VM500 Cycle time: (approx. 6.7 sec) per package with a package height of 300 mm and a blocking time of 2 sec. The cycle time per package increases if the blocking time is increased or the package height is reduced. The cycle time is also heavily influenced by the ejection speed of the cross stacker and therefore by the product (surface, format). Formats: Width: 140 to 500 mm / 5.5" to 19.7" Length: 105 to 330 mm / 4.13" to 13" Stack Height: 55 to 400 mm / 2.16" to 15.7" Infeed Height: 890 mm / 35" Outfeed Height: 890 mm / 35" Connection Load: 16A (2KW, 380/480 Volt, 3 phase, neutral) Air Requirement: 1000 Nl/min, 6 bar; non-lubricated, dry air Weight: approx. 500 kg

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION (“BOOK ON DEMAND”) AND SHORT RUNS TECNAU LIBRA 800 Nljdpfx Ajylyhdelkea Intended use: Designed for the finishing and processing of short runs and individual books (“books of one”) with varying sizes, page counts, and covers. Production from print run 1; up to 800 copies per hour Book format: min.: 100 x 125 mm / max.: A4 Thickness: min.: 2 mm / max.: 60 mm Equipment / Additional Information: Line Configuration: 1. Roll Feed: unwinder, merger, Dupla cutting unit, and book assembly station for the production of book blocks using 2-up printing. 2. Sheet Feeder: A variable number of loose sheets can be inserted into the book block as inserts. These sheets must have the same format and run length as the book block being processed. 3. Feeding to the Binding Machine: Station for manual feeding of pre-made book blocks, with transport via reading station, book turning module, and loading robot at the binding machine. 4. Variable Binding Machine for production of books with softcover covers. The binder is equipped with PUR glue at the spine and hot-melt glue at the sides. 5. Softcover Covering Machine, configured with sheet-fed cover feeder: already printed cover sheets are fed, front trimmed, side-trimmed, and creased to the correct size to match the thickness of the associated book block. 6. Cooling Tower/Cooling Spiral (product-specific, not included in delivery). Can be ordered as required by the customer (dependent on product type). The cooling conveyor can be configured based on available space and site requirements. Price varies based on configuration. We are happy to provide advice in selecting the suitable conveyor. 7. Variable Three-Knife Trimmer, suitable for trimming books with variable formats and cover types in three dimensions. 8. Plant Control Software Finishing Line The entire process is controlled via 2D Datamatrix codes. Through the code, the system receives approval for the following automatic settings and workflow control: • Information regarding book dimensions and inserts (quantity and order) • Binder setup (spine position, thickness, length) • Cover preparation: Softcover → creasing, trimming, edge cutting • Correct book-to-cover matching • Three-knife trimmer (knife positioning is automatically set to the book’s dimensions) Very good condition // Dismantling, packing of the machine, and securing (insurance of the machine during transport) will be carried out by the manufacturer / Tecnau.

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 98 0044 10, Condition: Very good condition Njdpsvf Iv Ssfx Alkola

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 12991843, Output: Up to 13,000 #10 envelopes/hour in draft quality Njdpfx Aljic N Epjkela Up to 13,000 #10 envelopes/hour in letter quality // Up to 12,000 #10 envelopes/hour in executive quality Image area: 9.4" x 15" (23.876 x 38.1 cm) Equipment / further specifications: Media size: Width: 3” min. to 12.25” max. Length: 5” min. to 15” max. Thickness: Up to 1/4" (depending on weight) Print resolution: 150, 200, 300, 600 dpi horizontal, 600 vertical Print modes: Draft, Letter, Executive Documentation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, nomor mesin/kendaraan: 0000071163, Type: ALPHA20 HOR Nedpfeunv Rxox Alkola Equipment / additional information: with Tank Refix DE (Serial No.: 15 P 0316 90633)

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: C0851000161, Equipment / further details: Final pressure: 150 hPa (mbar) Additional MACHINES / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. AVAILABLE ON REQUEST. Nodpfx Aeh Eu Sfelkola

Kondisi: sangat baik (bekas), TÜV stickers were last produced. Nedpfxsvf Ig Ds Alkola

Kondisi: sangat baik (bekas), Printing method: Thermal transfer / direct thermal Resolution: 203 dpi, 300 dpi or 600 dpi Print speed: 200 mm/s (203 dpi), 152 mm/s (300 dpi) Nedpfxsh Eh Ttj Alkola Maximum print width: 116 mm Interfaces: USB 2.0, RS232, Ethernet 10/100 Base T, 2x USB host ports, slot for CompactFlash memory card

Kondisi: baru, nomor mesin/kendaraan: 111208990B, Binding performance: 300 bindings/hour Paper format: DIN A4 Cover thickness: 3.5 – 28.0 mm Binding capacity: max. 280 sheets (80 g/m²) Equipment / further details: Nljdpjh Eiaysfx Alkea 11 material packages

Kondisi: sangat baik (bekas), 4x lifting eye components and 2x stapling head components for Hohner 48/5 S stitching heads Nljdpfx Aljh Eu Treksa

Tahun pembuatan: 2015, Kondisi: bekas, Year of manufacture: 2015 Condition: very good Counter reading: 2,116,000 Technical specifications: - Size - min. / max.: 80 x 100 mm / 500 x 700 mm - Min. creasing distance: 0.1 mm Nedpfx Aloy Hkyzokola - Optional perforating tools: 2/1 - 3/1 - 4/1, standard creasing kit - Output: 8,000 A4 sheets/hour - Paper weight: 80 - 400 gsm Configuration: - Creasing tool, milled, 2 grooves - Perforating tool The PIT STOP DG LINE 8000 series creasing and perforating machine is based on the previous 6500 model version. It is equipped with a user-friendly 7-inch colour touchscreen display and reaches speeds of up to 8,000 sheets per hour (A4 with 1 crease). It is primarily intended for low to medium volume jobs. The unit stands out for its high precision and wide versatility of creasing tool settings, including tools for tear-off perforation. The maximum sheet size is up to 50 × 70 cm, which can be increased to a length of 85 cm with optional accessories. The machine can also be extended with an online folding module capable of folding up to 450 gsm.

Kondisi: baik (bekas), irex 2000 / irex EVO Pelabel berukuran besar ID Housing: 61008950 / 4 IR Tipe: Pelabel manual dua baris Ukuran label: 31 x 22 mm Njdpfx Aoy Hixpelkela Konfigurasi pencetakan: Atas: 12 digit (kecil, sering untuk tanggal/lot) Bawah: 7 digit (besar, biasanya untuk harga/berat) Dengan pencantuman € dan lainnya Tersedia total 6 unit Pengiriman memungkinkan

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 90301142, Pemotong foil untuk foil hotstamping, maksimal 840 mm, 610 meter. Fitur rewind opsional. Nodpfx Asy D H Shjlkola

Tahun pembuatan: 2025, jam operasional: 10 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 90300934, CLC 600 Mesin Docter Unwind 600 mm Rewind 600 mm Njdpfx Ajy D H Rdjlkela

Tahun pembuatan: 1994, Kondisi: bekas, Tahun pembuatan: 1994 Kapasitas angkut maksimal: 600 kg Ukuran platform: sekitar 750 × 1050 mm Sambungan listrik: 380 V/50 Hz Nledpfx Aljyy Rlkokea Lift stapel/palet harus diambil di lokasi 77694 Kehl. Rampa pemuatan truk dan/atau forklift tersedia.

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0385, Mesin pencampur dan pengecor “OSV S400G” untuk gasket busa PUR. Dirancang untuk produksi produk cetak injeksi dari sistem poliuretan dua komponen dengan aplikasi material sepanjang lintasan yang ditentukan, misalnya untuk pintu lemari listrik. Nsdpfxoyzhbrs Alkola

Tahun pembuatan: 2022, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Neredeyse sıfır ayarında EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Baskı Kontrol ve Kalite Denetim Sistemini sunuyoruz. YÜKSEK DÖNÜŞÜM İÇİN AÇIKLAMA Yeni Gibi – Hemen Teslim – Uygun Fiyat – İhracata Hazır Model: EyeC Proofiler 1200 DT Durumu: Yeni gibi – neredeyse hiç kullanılmamış Mükemmel kondisyonda, neredeyse hiç kullanılmamış ve tamamen çalışır durumda EyeC Proofiler 1200DT baskı denetim sistemi. Orijinal satın alma fiyatı: €63.000 Yüksek segment bir denetim sistemini çok daha avantajlı bir fiyata edinme fırsatı. ✔ Baskıdan baskıya ve baskıdan dosyaya karşılaştırma ✔ Yüksek hassasiyetli kusur tespiti ✔ İlaç, ambalaj ve ticari baskı uygulamaları için uygundur Makine kurulu ve test edilebilir durumdadır. Ek fotoğraflar ve video isteğe bağlı olarak temin edilebilir. 🌍 İhracata uygun 📍 Türkiye'de bulunuyor Nedeyxfrpopfx Alkola ✈️ Teslim Şartları: EXW Türkiye – İhracata hazır ⚠️ Sadece ciddi alıcılar – hızlı karar tercih edilir 📧 Fiyat görüşmesi ve detaylar için hemen iletişime geçin ▪️Muayene Tipi: Baskıdan baskıya ve baskıdan dosyaya karşılaştırma ▪️Uygulama: Baskı denetimi ve kalite kontrol ▪️Maksimum muayene genişliği: yaklaşık 1200 mm ▪️Kamera sistemi: Yüksek çözünürlüklü hat tarama kamerası ▪️Aydınlatma: Entegre LED ışıklandırma sistemi ▪️Kusur tespiti: Eksik baskı, renk sapması, hizalama hataları, diğer kusurlar ▪️Yazılım: Orijinal EyeC Proofiler Yazılımı ▪️Kullanım: PC kontrollü sistem ▪️Hız: Yüksek hızlı otomatik denetim ▪️Endüstri: İlaç, ambalaj, ticari baskı Makine kuruludur ve talebe bağlı olarak gösterilebilir. Sorularınız veya detaylı bilgi talepleriniz için bize mesaj gönderebilir veya arayabilirsiniz. Ayrıca e-posta ya da WhatsApp üzerinden de ulaşabilirsiniz.

Kondisi: bekas, Tahun pembuatan: 2026, jam operasional: 15 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 204065, Used machine: CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a powered rotary knife, electrically oscillating knife, and a milling unit (including extraction device) • Multifunctional tool head accommodates up to 2 interchangeable tools • High-performance vacuum blower to secure materials • Standard configuration features a grey conveyor belt table. (Conveyor) Green-blue replacement conveyor available (provides high contrast for dark materials) Further expandable tooling options (on request): • EOT electrically oscillating knife • POT pneumatically oscillating knife • PRT powered rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angle cutting knife • Printed mark recognition • Camera registration • Punch tool for notches or holes • Milling unit with extraction device User-friendly • Easily exchangeable cutting tools, "PLUG & CUT" • Intuitive user interface • Easy blade changes • Vacuum zones easily activated with one click Nlodpfx Aoif Ek Relkea Fast return on investment • Low costs with high added value • Optimal material utilization through nest expert software modules (not included in standard package) • High speed • Consistent precision Specifications: • Short cutting times due to high positioning speeds up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll materials (can be upgraded with suitable unwinder) • Fast return on investment (Product image for illustration purposes) The machine is CE certified.

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Berat maksimum tumpukan + palet: 1200 kg Format kertas maksimum: 1200 x 900 mm Format kertas minimum: 560 x 360 mm Lebar bukaan minimum: 840 mm Lebar bukaan maksimum: 1600 mm Daya: 9,5 kW Daya listrik: 380V 3 fase 50 Hz Berat: 3400 kg Dimensi: 2700x2200x2200 mm Tingkat kebisingan: < 80 dB Nlodpeyztm Tofx Alkja

Tahun pembuatan: 1981, Kondisi: bekas, nomor mesin/kendaraan: 152, Kami menawarkan Datamail Roll Collator BIELOMATIK JUMBO DATAMAIL COLLATOR P668 untuk dijual. Konfigurasi: Tahun 1981 Unwind kertas jumbo, Ø 127 cm (50") Unwind karbon, Ø 70 cm Unit lem silang TIDAK TERSEDIA!!! Unit lem panjang yang dapat diprogram TIDAK TERSEDIA!!! Silinder die-cutting dalam berbagai ukuran dan cam untuk mesin penomoran. Nljdpfxeum T Nce Alksa Pengiriman snap out dengan batcher dan fungsi penomoran lanjutan Bielomatik (VWZ) – tidak terlihat di foto. Termasuk beberapa suku cadang. Mesin berfungsi, video dapat dikirim. Harga dengan pembongkaran: 9.000 euro.

Kondisi: baru, de_machine_offer_001 Nlodpoyuuc Iofx Alkea

Kondisi: bekas, New Hohner 43/6-S stitching heads, 2 pcs - loop stitching Nlodpjww Hbcjfx Alksa

Tahun pembuatan: 2001, Kondisi: bekas, Year of manufacture: 2001 Condition: operational Configuration - Mabeg M100/1000 automatic feeder - UV coating technology - UV dryer with 3 lamps - Delivery unit Njdpfxjww Hu Ae Alksla Specifications - Max. format / width: 720x1020 mm - Full-surface UV coating

Kondisi: bekas, Tahun pembuatan: 2021, en-2021-year-of-manufacture-condition-excellent-technical-specif ications-maximum-format-600-x-800-mm-minimum-format-210-x-297-mm- maximum-grammage-400-gsm-tools-cutting-creasing-kiss-cutting-osci llating-knife-maximum-product-height-1-5-mm-6-mm-oscillating-knif e-accuracy-0-1-mm-speed-max-1-2-m-s-approx-30-45s-sheet-depending -on-complexity-and-number-of-impositions-per-sheet-feeder-capacit y-100-mm-power-consumption-4kw-power-supply-240v-the-duplo-pfi-bl ade-b2-is-a-new-compact-flatbed-cutter-with-automatic-suction-fee ding-and-unloading-via-conveyor-belt-the-machine-is-intended-for- short-run-jobs-involving-die-cutting-creasing-and-kiss-cutting-of -stickers-the-machine-is-equipped-with-a-multifunctional-head-fea turing-tools-such-as-cutting-knife-creasing-knife-kiss-cutting-to ol-and-oscillating-knife-which-allows-cutting-material-up-to-6-mm -thick-maximum-grammage-is-400-gsm-precision-is-ensured-by-regist ration-marks-and-a-ccd-camera-capable-of-detecting-qr-codes-provi ding-automatic-job-changeover-the-machine-is-supplied-with-dpc-co ntroller-software-including-a-pc-for-operation-and-programmable-t able-vacuum-in-3-zones-programmable-oscillating-knife-for-cutting -corrugated-board Nedpfx Ajww Hitolkjla

Kondisi: bekas, Tahun pembuatan: 2017, Year of manufacture: 2017 Condition: very good Nlodpfx Asww Higelkja Specifications: - Maximum format: B2 Finishing applicator. The device enables the use of special films that adhere only to printed areas on a sheet produced by a digital printing press. It can also be used to achieve a spot coating effect in combination with a glossy transparent film.