Beli Mesin penggulung ulir bekas (43)

Kondisi: baik (bekas), Tahun pembuatan: 1998, panjang ulir: 65 mm, de-to-hu+it+lt_001 Hfjdsx H Rmujpfx Ag Rer

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Διαμετρήματα σπειρώματος M6-M16 Hfedpfswalx Eex Ag Ror Μέγιστο μήκος ράβδων 600 mm Σπείρωση και από τις δύο πλευρές

Kondisi: bekas, Tahun pembuatan: 2007, de-to-hu Hfsdpfsw E Nmkox Ag Rer

Kondisi: bekas, Thread rolling machine - Thread rolling machine ORT RP18 2-Rolls Hfodpfet Apugjx Ag Rsr Shaft diameter: 69.95 mm See video The machine is located in our warehouse in Gussago (BS), powered up. Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without chip removal, which can be performed cold or hot, aimed at improving surface finish (and thus fatigue behavior).

Kondisi: bekas, Mesin Rol Ulir TLM RP8 TLM TORTONA Tahun: 1995 Rentang diameter: 3-8 mm Panjang poros di bawah kepala: 90 mm Hfedpfx Asx Aqpreg Ror Panjang ulir maks.: 52 mm Ukuran die: 130/115x54

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, DIJUAL Hfedpfx Asxv Dcxog Rer Mesin pembuat ulir (rolling) Escofier H20Z

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, dehu-01 Hfjdpfexukrqsx Ag Rsr

Kondisi: bekas, 2 Mesin Pembentuk Ulir Bekas WMW UPW25 Hedpjx Dmnyofx Ag Rofr ---Hanya 10.000,00 Euro---

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Hsdpow D Aq Tefx Ag Rjfr manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, ORT RP30 MS 2 Rolls 30 Tons Thread rolling, knurling, small gears Year of manufacture: 2009 Electronic overhaul and retrofit with Siemens PLC (2025) The machine is powered and available for inspection at our warehouse in Gussago BS. Test run possible. M i m u Machine Tools Rolling is a mechanical process without material removal (chipless), which can be carried out either cold or hot, with the purpose of improving surface finish (and therefore fatigue performance). Force (tons): 30 Hsdpjuykz Defx Ag Rofr Number of rolls: 2

Kondisi: bekas, technical-data-2024-06 Hfjdpsxbt Izefx Ag Rer

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Spesifikasi teknis – SENY D75B: Tekanan penggilingan: 220 kN Diameter benda kerja: min. 3 mm – maks. 70 mm Pitch maksimum: 6 mm Pitch alur maksimum: 2,25 mm Lebar rol maksimum: 160 mm Diameter rol: min. 133 mm – maks. 170 mm Kecepatan rotasi poros rol: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Diameter poros dudukan rol: 54 mm standar – 69,85 mm khusus Jarak antar poros: min. 135 mm – maks. 230 mm Langkah kerja: maks. 15 menit Kecepatan umpan: 0,5 mm/s – 6 mm/s Waktu laminasi: 0,1 s – 100 s Waktu jeda: 0,1 s – 100 s Daya motor utama: 5,5 kW Konsumsi listrik: 8,6 kW Kapasitas tangki: 130 liter Berat: sekitar 2.100 kg. Rol tambahan tersedia: M4,5 x 0,75 ISO. M6 ISO. Hfodexm Stgopfx Ag Rer M10 ISO.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang ulir: 12.000 mm, berat keseluruhan: 5.000 kg, diameter benda kerja (maks.): 90 mm, diameter spindel: 80 mm, jenis arus masuk: tiga fasa, diameter rol: 250 mm, kecepatan spindel (maks.): 50 rpm, kecepatan spindel (min.): 20 rpm, tinggi total: 2.000 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, 60-тонная гидравлическая резьбонарезная машина с поворотными шпинделями для подачи заготовки и сквозного проката Hfedpfx Agsv Rb Apo Ror Скачать PDF-файл с фотографиями

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 00049781, diameter benda kerja (maks.): 50 mm, diameter spindel: 69 mm, kecepatan spindel (maks.): 5.000 rpm, panjang langkah: 130 mm, jarak antar baris: 255 mm, RINCIAN TEKNIS Luas penopang: 180 mm Diameter benda kerja: 4 - 50 mm Tekanan penggilingan (penyesuaian tanpa langkah): 0-200 kN Kecepatan pemajuan (penyesuaian tanpa langkah): 0-50 mm/s Siklus penggilingan per menit: 0-86 Spindel penggilingan Diameter spindel penggilingan: 69,85 mm Jarak antar spindel penggilingan: 125 - 255 mm Panjang penjepitan spindel: 160 mm Langkah carriage spindel penggilingan: 130 mm Kecepatan putar spindel penggilingan: 3000-5000 rpm Diameter alat penggilingan: 130 - 200 mm Tinggi rangka mesin: 800 mm Tinggi spindel penggilingan di atas rangka mesin: 160 mm Hsdpfx Aoxbfwzjg Rjfr RINCIAN MESIN Kontrol: SIEMENS SIMATIC C7 Tegangan: 400 V, 50 Hz Dimensi & Berat Tinggi mesin: 1.600 mm Berat: 2.400 kg

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece. Hodpfxsh A S Htj Ag Rsfr

Kondisi: diremajakan ulang (bekas), CNC-Gewindewalzmaschine-Gewinde-Rollmaschine-elektronische-Retro fit-mit-Siemens-SPS-und-Touchscreen-Thommen-PR17 Hsdjilh Tispfx Ag Rsfr

Kondisi: bekas, 1 Hjdoxbt Iuspfx Ag Rjfr

Kondisi: bekas, Tahun pembuatan: 1991, Workpiece diameter 30 mm Thread length 110 mm Hfjdpfjt Hwzcex Ag Rer Thread pitch 0.5-2.75 mm/rev Total power requirement 4.5 kW Machine weight approx. 1.7 t Space requirement approx. m M O N N I E R & ZAHNER Switzerland Thread whirling machine with workpiece loading system Type MZ 600, year of manufacture approx. 1991, #3591 _____ Max. workpiece diameter approx. 30 mm Max. workpiece length approx. 110 mm Axial milling length approx. 100 mm Module in steel approx. 1 Worm starts 1 Axis distance tool-workpiece min./max. 0 - 70 mm Whirling head swiveling +/- 12° Tool size approx. 70 x 16 mm Whirling head speeds approx. 1,000 - 6,000 rpm Pitch range approx. 0.5 - 2.75 mm/rev Whirling head drive approx. 1.5 kW Total drive approx. 4.5 kW - 220 V/380 V / 50 Hz Weight approx. 1,700 kg Accessories / Special Equipment: Machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a vibratory bowl feeder from Rübenach with pneumatic swing gripper for inserting the blanks, as well as a tailstock (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew while the cross slide sets the thread depth. Copying unit at the end of the cross slide with template holder for tapered screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electrical program control with display of movement sequence. Error display, workpiece counter, oil mist extraction, coolant system, etc.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Hfodpfeuz If Nox Ag Ror Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Thread rolling machine – thread roller ORT RP18 2-roll Swivelling spindle Hfodpfjuua H Rex Ag Ror Overhauled with Siemens PLC See video The machine is powered in our warehouse Test run possible

Kondisi: bekas, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT Hedeuhb Uhopfx Ag Rofr - CNC control (Siemens-based) - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Kondisi: diremajakan ulang (bekas), Thread rolling machine - thread rolling machine ORT RP18 2-roller Overhauled - new Siemens PLC See video The machine is located in our warehouse in Gussago BS, under power Test run possible Hfodpfjvxa Dbox Ag Rjr Mimu machine tools Thread rolling is a mechanical process without material removal, which can be carried out cold or hot, serving the purpose of improving surface finish (and thus fatigue behavior).

Kondisi: bekas, TECHNICAL DATA - Max. piece length: 1350 mm - Max. tooth length: 1200 mm - Max. tooth diameter: 120 mm Hedpfxeuhb Uno Ag Refr - Power: 18.5 kW - Machine dimensions: 2840 x 1700 x 1420 mm

Kondisi: bekas, Tahun pembuatan: 2003, Thread Rolling Machine Description: Rolling force: 2-20 tons Workpiece diameter: max. 75 mm Tool diameter: 140-200 mm Inclination: +/-6° Shaft diameter: 69.95 mm Hfsdet Hmv Nspfx Ag Rjr Manufacturer: ESCOFIER Model: H20Z Year of manufacture: 2003 Under power in our warehouse M i M u Machine Tools (Italy)

Kondisi: bekas, Gewinderollmaschine ORT RP30U Hedet H Ty Uepfx Ag Refr