Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, gaya penekanan: 200 t, daya: 0,045 kW (0,06 hp),

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, daya: 9,7 kW (13,19 hp), en-001 Rbedpfx Abou Tha Ijuot

Tahun pembuatan: 2013, Kondisi: bekas, Technical specifications for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of opened bales: 674 pcs Operating time: only 3 days, exclusively for commissioning the entire system upon initial installation Opening cycle: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum bale weight: 2,000 kg Conveyor height: 1,400 mm Maximum conveyor width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of delivery: - Infeed conveyor 3,500 x 1,200 x 1,400 mm - Feed conveyor to opener 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for the short operating period: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The background for the installation was to ensure that in case of a malfunction or during maintenance of the incineration plant, municipal waste could still be received, compacted, wrapped, and stored, until normal operations resumed. Afterwards, all bales could be opened and the waste fed into the standard incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and has never been used in regular operation since. Only during the commissioning and initial trial runs in 2015 were 674 bales opened over a period of three days. The system is in excellent, immediately operational condition. Due to reconstruction work at the incineration plant, the installation site of the bale opener was required for other purposes. Therefore, the complete line is now available for sale. Rbjdpeu Tg I Dofx Abuet Brief description of the bale opening process: Pressed bales are placed onto the feed conveyor from the side or from behind using a forklift truck. For opening, the bales must be positioned so that the wire or twine strapping runs horizontally to the conveyor; otherwise, the bales must be rotated by 90°. The infeed conveyor advances one bale at a time to the cutting unit. The gripper holds the wires or twine strapping firmly. The rotating knife cuts the bale longitudinally. Afterwards, the gripper returns to its home position. The opened bale is then conveyed to the discharge chute and falls onto the downstream conveyor technology. Remarks: Original purchase price of the entire system: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. The system has been dismantled into shipping units, placed in storage, and is available at short notice for inspection and loading. We accept no liability for the technical data provided or for any potential errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, jam operasional: 34.480 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 19.000 kg, tinggi transportasi: 3.300 mm, kapasitas tangki oli: 750 l, daya: 45 kW (61,18 hp), en_Bollegraaf_HBK100_techdata_2024-06-30 Rsdpfexbgnhsx Abuebt

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 3.641 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 36 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.080 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, daya: 15 kW (20,39 hp), laju aliran volumetrik: 90 m³/jam, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Main press force: 36 t Specific pressing force: 467 N/cm² Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Filling volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput rates at a bulk density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport dimensions (baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (baler): approx. 4 t Notes: The baler has been function-tested in our workshop, subsequently stored, and is therefore available at short notice. Full machine documentation (operating manual, CE declaration, electrical and hydraulic schematics) is available. Rbjdsu Thh Eopfx Abust Viewing by appointment possible. No liability is accepted for the accuracy of the technical specifications or any possible errors.

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Extremely high separation efficiency, depending on material flow height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm Rsdpfxodubpuo Abujbt * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Kondisi: baru, Tahun pembuatan: 2026, Consisting of a bale breaker for large bales, type MHB, and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Approx. 15 weeks production time) Suitable for round or square bales. Including frequency inverter (controls the speed of the scraper floor). The bales are placed on the scraper floor and the cutter head feed is switched on. The cutter head tines tear the straw from the bale and throw it into the hopper. Ideally, this machine is combined with a straw shredder. Technical data for bale breaker: Capacity: 1–2 bales per hour Up to a maximum of 600 kg per hour (depending on the installed sieve size in the straw mill, kW rating of the straw mill). Without a straw mill, the bale breaker can process up to 900 kg/hr of straw. Maximum square bale size: 2400 x 1200 x 800 mm (LxWxH) Cutter head motor: 5.5 kW, 380 V Scraper floor feed: 0.75 kW, 380 V Dimensions: 3750 x 1730 x 2460 mm (LxWxH) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the larger straw shredder (18.5 kW): +€3,940 net Technical data, MHZ with special feed hopper: Motor: 15 kW, 380 V electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Selectable perforation (10, 12, 15) 22, 30, 45 mm With star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Options at extra cost: Feed auger: +€970 net Cyclone (suspension by customer) *should be no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional rotary valve (renders material pressureless) +€5,750 net Control system: from €1,620 net Special bale breaker extension 3m (other dimensions upon request) +€9,750 net Briquetting press MPP 180 S; little-used demonstration unit 70 mm briquette – up to max. 100 kg/hr from €39,700 net * Larger machines available on request --- Description: muetek bale breaker was developed for processing round and square bales of hay and straw. The attached shredder processes straw from all types of cereal crops, hay, corn, and miscanthus. muetek machines from the MHZ/MHB series are characterized by their robust design and heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor onto which the bale is placed using a front loader. The support is adjustable depending on the type of bale. Rbjdpob Nulhofx Abuot The chain conveyor pushes the bale against the cutter rotor; the feed speed is adjustable. The cutter rotor is fitted with multiple teeth which rip open the straw bale. The separated straw is then discharged. --- The machines are generally designed for dry materials: - Straw - Hay --- Processing hemp bales is only possible with a special bale breaker Surcharge approx. €9,720 net (depending on configuration) Straw mills are not suitable for processing hemp. Material requirements: Maximum moisture content: 12%

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for increased throughput performance We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net Rjdjb Ny Eyjpfx Abuebt (Recommended for more than 20% hardwood content) - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 590 h, Fungsionalitas: belum diuji, en-1 Rbsdjvnq Rkspfx Abuot

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 6.777 h, Fungsionalitas: berfungsi sepenuhnya, Base configuration DW 3060-F "Büffel" (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting shoe Hydraulically adjustable support foot Splash guards (inner and side fenders) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, compliant with EUROMOT IV emissions standard Reinforced planetary gearbox 380 kW Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Rear conveyor belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged wear rails 24 V electric control Roller reversal via electric motor when main engine stopped Automatically reversible fan Chassis with level control Rbjdpfjxx Tfzjx Abuot Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydrostatic travel drive SHREDDING SYSTEM SIZE "L" 600/4 COMPLETE Auxiliary hydraulic connection 70 l/min Radio remote control Comb extension Size "L" Limiter Mount adapter for comb extension Limiter Size "L" Overband magnet for rear conveyor Frame for overband magnet Moisturization unit

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 2.380 h, Fungsionalitas: berfungsi sepenuhnya, AK 315 Basic Package: Central axle trailer chassis with 2 axles, 80 km/h road approval Brake system incl. EBS and lighting according to EC Directive Tyres: 385/65 R22.5 50 mm EC towing eye incl. slip-on coupling shoe Hydraulically adjustable support leg Splash guards (mudguards inside and side panels) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, compliant with EUROMOT V emission standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste screen basket with tailgate Impact plate with teeth Fuel tank 300 litres Feed roller: length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for actuation of cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive for feed roller and scraper floor Advanced radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic centre section Reinforcement plates (Hardox) on both sides of the loading hopper for the side walls (loading edge) Drive preparation Fire extinguisher Doppstadt Telematics System Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic drive Redpfx Ajxx Sdpjbuobt Upgraded radio remote control with foot switch Flail tips “Bear’s Paw” Fine-shredding basket Water spray system Lighting package: engine compartment and rear conveyor Delivery date upon agreement

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 2.798 h, Fungsionalitas: berfungsi sepenuhnya, Base Package AK 640 SA: 3-axle semi-trailer chassis, road approval for 80 km/h Braking system incl. ABS and lighting according to EU directive Tyres: 385/65 R22.5 Permissible total weight: 32,000 kg Hydraulically adjustable support legs Splash guards (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip “Streusel plus” Impact plate with teeth Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raise/lower support legs and open/close rear basket, fold/unfold rear belt, release drive) when engine is off 24 V electrical controls Separate control box at rear of machine Hydraulically folding fine shredding basket “Multimesh” (mesh size 30 – 280 mm, gradations on request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic centre section Lower belt: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Water spray system for external water connection Scraper floor with 71 bars Wear protection in drum area Reinforcement plates on feed hopper (wear-resistant steel), both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Rsdpfx Aboxx Rrrsusbt Optional Equipment: Hydrostatic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package for scraper floor and feed Flail tips “Bear Paw” Delivery date to be arranged Available from 04/2026

Kondisi: baik (bekas), Tahun pembuatan: 2022, jam operasional: 600 h, Fungsionalitas: belum diuji, Equipment: Basic Methor Kette package without shredding system - Track undercarriage including 2 travel speeds - 400mm triple-bar tracked chain - Auxiliary hydraulic connection 70 l/min - 24V electric control system - Full-size radio remote control - Maintenance-friendly engine compartment with LED lighting - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special Equipment: Rbjdevrz Rvjpfx Abujt Shredding system Size L (8 teeth) Cat C7.1 engine, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Watering system

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 119 h, Fungsionalitas: berfungsi sepenuhnya, Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: Belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24 V electric control – additional electric pump for operation of the following functions when the engine is switched off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Rsdpfjxx Sbnsx Abujbt Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt Telematic System Paint finish: RAL2011 deep orange Additional Equipment: Powertrain 260 kW – electric drive 3-axle drawbar chassis unit Shredding system Size L – 20 teeth Auxiliary hydraulic connection 35 – 80 l/min Hydraulic drive Hopper extension 350 mm, irrigation on both sides Rear conveyor 7 m Overband magnet – neodymium Frame for overband magnet 7 m Delivery date to be agreed

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 4.826 h, en-GB-1 Rjdpsvnmldofx Abuobt

Kondisi: baik (bekas), Tahun pembuatan: 2022, jam operasional: 2.100 h, Fungsionalitas: berfungsi sepenuhnya, de-en Rodpfjwnfwqex Abujbt

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 3.300 h, Fungsionalitas: berfungsi sepenuhnya, Base Package AK 640 SA Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side fenders) Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control including automatic scraper floor reversal Separate drive for intake roller and scraper floor (twin drive) Fuel tank 2 x 450 liters Intake roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged lubrication bars Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is off 24-V electrical control system Separate control box at rear of machine Hydraulically folding fine shredding basket Multimesh (mesh size between 30 - 280 mm, gradation on request) including one-piece rear flap Rear conveyor: Belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, includes antimagnetic centre section Underside conveyor: Belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Rbsdpexx Tigefx Abujt Wear protection in drum area Reinforcement plates at feed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt Telematic System Paint finish: RAL 2011 deep orange Additional Equipment: Hydrostatic travel drive Scraper floor chain lubrication NEODYMIUM overband magnet Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: engine compartment and rear conveyor Spraying system Delivery date to be agreed Available from 06/2026

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 881 h, Fungsionalitas: belum diuji, Perlengkapan: Paket dasar Methor dengan trek rantai Sasis berkaki rantai termasuk 2 kecepatan berjalan Rbjdpevnmmzjfx Abust Rantai bawah 400 mm dengan 3 sirip Sambungan hidrolik tambahan 70 l/menit Kontrol elektrik 24-V Remote control nirkabel besar lengkap Ruang mesin ramah perawatan dengan lampu LED Hopper lipat dengan sensor posisi dan kontrol otomatis Kipas dapat di-reverse secara hidrolik Peringatan mulai berbunyi Tangki bahan bakar 300 liter Pengecatan: RAL 2011 oranye tua Perlengkapan tambahan: Mesin Cat C7.1, 205 kW Konveyor belakang 6,9 m Rangka untuk magnet overband Magnet overband Sistem pengganti cepat untuk rol Sistem pengganti cepat untuk rol Sistem penyiraman Penerangan kerja LED Pompa listrik tambahan untuk pengoperasian saat mesin mati Pemadam api GN 9 A-3 DIN EN 3

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, en: Basic Package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24-V electric control – additional electric pump for the activation of the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large lateral GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Optional equipment: Drivetrain 310 kW - EV 3-axle drawbar chassis unit Comminution system Size L-C3 600/4-30Z Size L limiter Additional hydraulic connections 35–80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet neodymium Frame for overband magnet 7 m Central lubrication system Special paint in RAL Delivery date upon agreement fr: Pack de base Inventhor 6 : Système load-sensing Réservoir de carburant 500 litres Convoyeur longitudinal : longueur de bande 2 900 mm, largeur de bande 800 mm Lattes d’usure centrales Commande électrique 24 V – pompe électrique supplémentaire pour l’activation des fonctions suivantes moteur à l’arrêt : Relevage/abaissement/coudage du convoyeur arrière, ouverture/fermeture du clapet peigne, ouverture/fermeture du peigne, relevage/abaissement de la trémie rabattable Télécommande complète Grandes portes de maintenance latérales en PRV Compartiment moteur facile d’accès Kit d’éclairage LED : compartiment moteur et arrière Ventilateur hydraulique réversible Protection de chargement sur trois côtés Trémie rabattable Extincteur Échelle de maintenance Boîte à outils Avertisseur sonore de démarrage Système télématique Doppstadt Peinture : RAL2011 orange profond Équipements optionnels : Chaîne cinématique 310 kW - EV Ensemble de train roulant à timon à 3 essieux Système de broyage taille L-C3 600/4-30Z Limiteur taille L Prises hydrauliques supplémentaires 35–80 l/min Entraînement hydraulique Rehausse de trémie 350 mm, arrosage à gauche Convoyeur arrière 7 m Séparateur magnétique à aimant néodyme Châssis pour séparateur magnétique 7 m Système de lubrification centralisé Peinture spéciale RAL Délai de livraison à convenir es: Paquete básico Inventhor 6: Sistema Load-Sensing Depósito de combustible de 500 litros Cinta longitudinal: longitud 2.900 mm, ancho 800 mm Lamas de desgaste centralizadas Control eléctrico de 24 V – bomba eléctrica adicional para el accionamiento de las siguientes funciones con el motor parado: Elevar/bajar/plegar cinta trasera, abrir/cerrar compuerta de peine, abrir/cerrar peine, subir/bajar tolva abatible Control remoto completo Grandes puertas de mantenimiento laterales de PRFV Compartimento del motor de fácil acceso para mantenimiento Paquete de iluminación LED: motor y zona trasera Ventilador hidráulico reversible Protección de carga por tres lados Tolva abatible Extintor Escalera para mantenimiento Caja de herramientas Rbsdsxx N T Ispfx Abuet Avisador acústico de arranque Sistema telemático Doppstadt Pintura: RAL2011 naranja intenso Equipamiento adicional: Transmisión 310 kW - EV Unidad de chasis con lanza de tiro de 3 ejes Sistema de trituración tamaño L-C3 600/4-30Z Limitador tamaño L Conexiones hidráulicas adicionales 35–8

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 200 h, Fungsionalitas: belum diuji, Equipment: Basic Package Methor Track Tracked undercarriage incl. 2 travel speeds Undercarriage track 400mm, triple grouser Auxiliary hydraulic connection 70 l/min 24 V electric control Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan Acoustic start-up warning Fuel tank 300 liters Paint finish: RAL 2011 deep orange Additional Equipment: Rubber quick-change pads Rbsdpfxovnq Tre Abuet Engine Cat C7.1, 205 kW Rear discharge conveyor 6.9 m Shredding system Size L (8 teeth) Frame for overband magnet Overband magnet Quick-change roller system on the roller Quick-change roller system on the machine Water spray system LED work lighting Additional electric pump for operation in case of engine shutdown

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 1.150 h, Fungsionalitas: berfungsi sepenuhnya, Basic Package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor belt: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electric control system – additional electric pump for operating the following functions when the engine is off: raise/lower/fold rear conveyor, open/close comb gate, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear section Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Rjdpfxjxx N Dgo Abuebt Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: 260 kW - EV powertrain 2-axle semi-trailer chassis unit Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic ports 35 - 80 l/min Hydrostatic drive Hopper extension 350 mm, watering system on both sides Size L hopper wedge with NM brush Rear conveyor 7 m Neodymium over-belt magnet Frame for 7 m over-belt magnet Delivery date by arrangement

Tahun pembuatan: 2016, Kondisi: perlu perbaikan (bekas), Fungsionalitas: belum diuji, HS 800 Basic Package Spiral Shaft Screen Deck AA209-150 Special Paint Finish: Green Rbodpovm Uqrsfx Abust

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), Fungsionalitas: belum diuji, Basic package Selector 800 Rbedovm Upnjpfx Abuet Lower conveyor BB 1350 mm AA 6.4 m -profiled belt- SPIRAL SHAFT SCREEN DECK AA254-150 – 16 shafts

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 6.031 h, Fungsionalitas: berfungsi sepenuhnya, Basic package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC towing eye, incl. slip-on shoe Hydraulically adjustable support legs, both sides at the front and rear right Splash guards (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, complies with emissions standard EUROMOT TIER IV Final Hydraulically reversible fan for water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper with 5.0 m³ capacity Prepared for stone grid Hydraulically foldable side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically foldable rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyors Emergency stop switch at side and rear conveyors Load-dependent material feed from apron conveyor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, fold in/out rear conveyor, fold in/out side conveyor, kink side conveyor and load control +/-, switch automatic mode on/off From the machine control panel: fold in/out side conveyor Redpfsxx R Rhex Abusbt Hydraulically foldable cleaning brush with individual brush elements and spring tines Centrally arranged wear strips 24 V electric control Rear underrun protection Front side impact protection (reinforced version) and rear side impact protection on both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paint finish: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider for rear conveyor Delivery date by arrangement

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, de Rodsw S Uahepfx Abuebt