Beli peralatan pengelasan bekas (404)

Kondisi: bekas, Technical details: Stepless welding current: 400 A Protection class: IP21 Total power requirement: 23.2 kVA Machine weight approx.: 128 kg Machine dimensions: 1.3 x 0.5 x 0.9 m - TIG - Manual arc welding and TIG - DC welding current - Cooling type: AF - Control switchable 2-/4-stroke spot welding, stepless Hfedou Nwbispfx Ag Ror The following components have been replaced with NEW ones: - Hose package 4.0 meters - Ground clamp and ground cable 4.0 meters - Pressure regulator

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Ampere: 300 Pendingin air: Ya. Kontrol: TA 24. Tahun: 2019. Hfjdpfxjxvq Dcs Ag Rer Negara asal: Swedia. Ukuran (P x L x T): 1150 x 620 x 1100 mm. Berat: 90 kg. Dilengkapi unit pendingin air Esab, panel kontrol TA24, dan selang TIG Esab Exeor SR 21 baru sepanjang 4 m. Mesin telah diuji dan diservis. Kami memiliki 2 unit mesin tipe ini di stok.

Kondisi: siap digunakan (bekas), - 400 hingga 2600A - dapat mengelas hingga ukuran baut 25mm Hedexuz D Dspfx Ag Refr - kondisi sangat baik

Kondisi: baik (bekas), 1 Mesin Las MIG/MAG Produsen: Merkle Tipe: MobiMIG 320 K Data Teknis: Tegangan Masuk: 3 x 400 V Rentang Pengaturan: 25 - 320 Ampere Siklus Kerja: 40% ED pada 300 Ampere 60% ED pada 270 Ampere 100% ED pada 240 Ampere Pengaturan Arus: tanpa langkah Pendinginan: Inverter dengan kipas internal Torch: pendingin gas Desain: unit pemasangan portabel Penggerak kawat: penggerak 4-rol tipe DV 26 Sekring: 16 Ampere Dimensi: 600 x 300 x 565 mm Hfsdpfxexpf N Ts Ag Rjr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, jam operasional: 4 h, nomor mesin/kendaraan: 84149090, Complete container station with screw compressor, prepared for operation in industrial conditions, equipped with a full air treatment system. Ready for immediate startup. Only 4 hours of operation for testing purposes. 10" CONTAINER Specifications Compressor Ervor Rafale 50 SP (2016) – screw type, oil-lubricated, fixed speed Motor power 37 kW (50 HP) Capacity (FAD) ~260 Nm³/h at 7–9 bar Drive Belt drive with automatic tensioner Power supply 400 V / 3-phase / 50 Hz Dryer Adsorption (2-column, regenerated, time or DP controlled) Aftercooler Air-cooled compressed air aftercooler with ventilation Filtration Pre-filter, fine filter and final filter, class 1 μm / 0.01 μm Container 10 or 20 feet, steel, ventilated, insulated, with service doors Control Control panel + pressure switch, hour meter, phase protection Technical condition Very good Cold-regenerated dryer ERVOR adsorption dryer – 2-column air drying system Integrated in the container station. Designed for continuous operation, with automatic bed regeneration. The set also includes an aftercooler and a complete set of filters (pre-, fine, and final). System ready for operation in industrial or military mode. Final humidity: ≤ -40°C PDP (pressure dew point) Hfsdpfjw D Ut Hjx Ag Rer Air treatment and cooling system The station is equipped with a multi-stage compressed air treatment system, including: 3-stage filtration (solid particles, oil, moisture), Aftercooler with fan, Insulated and serviced piping, Control manometers, ball valves, service bypasses, System designed for operation in harsh conditions – industrial and mobile Additional photos or a short video available on request. Please feel free to purchase.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: P01740 F 01278 / 21, jenis arus masuk: AC (pendingin udara), tinggi total: 310 mm, lebar total: 430 mm, panjang total: 570 mm, tegangan masuk: 230 V, berat keseluruhan: 48 kg, Perlengkapan: Pelat tipe tersedia, Universal vibrator UVR-300 memungkinkan pemasukan otomatis yang cepat untuk beragam diameter baut hingga M8 tanpa perlu penggantian suku cadang atau penyesuaian. Kondisi: Terdapat sedikit tanda pemakaian, karena universal vibrator hanya pernah digunakan sekali sebagai unit demonstrasi. Rentang kerja: Baut dan pin berulir SOYER dengan flens M3, M4, M5, M6, Ø 7,1 dan M8, panjang 6 – 40 mm Kapasitas pengumpanan: sekitar 20 – 50 baut/menit, tergantung ukuran Kapasitas isi: maks. 6 kg Diameter mangkuk vibrator: 300 mm Tekanan udara: 5 – 7 bar Koneksi listrik: 115/230 V, 50/60 Hz (115 V memungkinkan lewat adaptor tambahan) Dimensi: 430 x 310 x 570 mm (P x T x L) Berat: 48 kg Ruang lingkup pengiriman: • Universal vibrator UVR 300 Hfedpot Aktksfx Ag Rsr • Paket konversi untuk M3 - M8 Kami mengirim bebas ongkir, sudah termasuk bea cukai dan pajak (DAP, sudah bea cukai).

Kondisi: bekas, 1. Technical Details: Power input: 20 - 300 A Hfodou Nwgrjpfx Ag Rjr Welding voltage: U1 = 380 V Connected load: 14 kVA Approximate machine weight: 171 kg Machine dimensions: 0.9 x 0.5 x 0.92 m Transformer - Welding unit - Welding transformer - Welding rectifier, portable Welding process: Manual arc welding (SMAW) Control: 14-step adjustment for thin sheet metal, 14-step adjustment for thick sheet metal Air-cooled Protection class: IP 21 Direct current (DC) Includes electrode holder with approx. 6.0 meter cable Earth clamp and earth cable approx. 4.0 meters *

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Amper: 650 Hsdpfsxvqz Ujx Ag Rofr Pendingin Air: Ya. Pengumpan kawat: Esab Feed 4804 MA24 Kontrol: MA 24. Negara asal: Swedia. Dengan fitur sinergis di kotak kawat dan selang las Esab PSF 510 sepanjang 4,5 m. Mesin telah diuji dan diservis.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 04986, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Hfodpsxnl S Sefx Ag Ror Batas waktu pembayaran mesin adalah 20.11.2025! Penawaran mengikat Anda untuk pengambilan tepat waktu antara 01.12.2025 dan 05.12.2025! RINCIAN MESIN Data Listrik Tegangan operasi: 230 V Frekuensi: 50–60 Hz Dimensi & Berat Dimensi (P x L x T): 700 x 450 x 1.000 mm Berat: 150 kg PERLENGKAPAN Alat penembak baut Lemari bengkel beserta aksesori yang sesuai

Kondisi: baik (bekas), Tahun pembuatan: 2015, 1 mesin las gas pelindung bekas Daihen /OTC M 380-S Tahun pembuatan 2015 Arus listrik 30-380A Daya las pada siklus kerja 100% 270A Kawat las 0,8-1,6mm Kecepatan umpan 0,1-22m/menit Dengan penghantar kawat 4-rol dengan kontrol encoder Hfedpfexnqnxsx Ag Rjr

Kondisi: bekas, Technical details: Length: 1120 mm Height: 1480 mm Power consumption: 500 A Power at 100% duty cycle: 390 A Power output: 23 kVA Welding current: 390 V Approx. machine weight: 234 kg Machine dimensions: 1.12 x 0.58 x 1.48 m Power output: 23 kVA Includes: Hfodpfx Agewqpl De Ror • Hose package with welding torch • Ground cable

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Arus: 420 A Pendingin Air: Ya. Tahun: 2013 Negara asal: Swedia. Ukuran (P x L x T): 650 x 1100 x 1000 mm. Berat: 240 kg. Hfodexvqzbopfx Ag Rjr Dilengkapi dengan selang las Esab PSF 315 sepanjang 4 m. Mesin telah diuji dan diservis.

Kondisi: bekas, Technical details: Welding current: 330A / 50% duty cycle, up to 210A / 100% duty cycle Protection rating: IP23 Total power requirement: 13.8 kVA Machine weight approx.: 71 kg Machine dimensions: 0.95 x 0.60 x 0.90 m - MIG / MAG - Cooling system: water-cooled AF - Insulation class: B - Power range: 3A / 20V up to 330A / 34V - Wire diameter up to 1.6mm Equipment: - Cooling unit Hfedpfxsu Nwb Ne Ag Rer - Control via robot interface

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Arus: 400 Hfjdpfx Agsxvqy De Rer Pendingin air: Ya. Wire feeder: Esab Feed 304 M12. Negara asal: Swedia. Kotak kawat M12 tertutup dengan penggerak 4WD dan selang las Esab MXL 411w 4m baru. Mesin telah diuji dan diservis.

Kondisi: bekas, Technical Details: Power consumption: 350 A Total connected load: 17.5 kVA Approx. machine weight: 58 kg Machine dimensions: 0.6 x 0.35 x 0.5 m Welding rectifier/inverter with transport trolley MIG/MAG: 40A / 14V up to 350A / 31.5V TIG: 10A / 10V up to 350A Manual arc welding (MMA): 15A / 20.5V up to 350A / 34V Mains voltage U1: 380 - 415V Hjdpfju Nwdkjx Ag Rofr Cooling type: F (water-cooled) Protection class: IP 23 without hose package *

Kondisi: bekas, Tahun pembuatan: 2006, Technical Details: Power consumption: 30 / 15.5 350 / 31.5 A Welding current: Direct current (DC) V Open-circuit voltage: 15.5 - 41.0 V Total power requirement: 16 kVA kW Approx. machine weight: 125 kg Machine dimensions: L: 1.05 x W: 0.5 x H: 0.70 m Compact welding unit – welding rectifier with integrated wire feeder Hfjdpeu Nwgfsfx Ag Rjr -MIG MAG -Connected load 9.7 kVA -2-stroke; 4-stroke; Spot; Interval -Cooling type AF -Protection class IP 23 -Insulation class H -Welding torch and ground cable

Kondisi: bekas, Technical Details: Number of controlled axes: 6 Workpiece weight: 20 t Operating hours: 4290 h Control system: YASKAWA Total power requirement: 35 kVA Total weight (approx.): 2000 kg Dimensions (L x W x H) - Robotic welding cell: 2.7 x 1.1 x 2.0 m Control cabinet dimensions: L: 700 x W: 800 x H: 2000 mm Welding robot system consists of: Robot specifications: - 6 axes of movement - Max. payload: 20 kg - Working envelope: rotational radius = 1717 mm, vertical reach = 1417 mm, horizontal reach = 2072 mm - Rotation axes arm: S-axis rotation = +/-180°; L-axis lower arm = +1550° / -110°; U-axis upper arm = +255° / -165° - Wrist axes: R-axis roll = +/-200°, B-axis pitch/yaw = +230° / -50°, T-axis rotation = +/-360° - Axis speeds: S-axis and L-axis = 170°/s; U-axis = 175°/s; R-axis and B-axis = 355°/s; T-axis = 525°/s - Permissible torque: R-axis and B-axis = 39.2 Nm; T-axis = 19.6 Nm Welding unit specifications: - Fronius, TIG welding (DC & AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, protection class IP23 Positioner specifications: Hfodpfxsu Nwfbe Ag Rer - Table diameter Ø 600 mm, 360° rotation, 90° tilt to the right/left Wire feed specifications: - Fronius, type KD 7000, feed rate 0.2 - 22 m/min, protection class IP23, voltage U1 230V Hand pendant control Control cabinet in stock.

Kondisi: bekas, Technical details: Welding current: TIG: 420 A Welding current: MMA: 320 A Open circuit voltage: TIG: 59 V Open circuit voltage: MMA: 42 V Machine weight approx.: 11.5 kg Dimensions (L x W x H): approx. 0.85 x 0.4 x 1.0 m Welding rectifier / inverter, mounted on 4 wheels Hfjdpfjv H Ayhox Ag Rsr TIG / MMA welding Direct current TIG = up to 420 A MMA = 240 A Protection class IP 23 Air-cooled *

Kondisi: bekas, Technical details: Welding current: 500 A Length: 1000 mm Height: 1350 mm Stepless welding current adjustment: 50-500 A Machine weight approx.: 282 kg Dimensions (L x W x H): 1.0 x 0.6 x 1.35 m MIG-MAG welding machine 2/4-stroke switching, stepless, welding current display Water-cooled with antifreeze protection Shielding gas solenoid valve Small hose package Torch head Wire feed unit with 4-roll drive for wire Ø 0.8/1.0/1.2 mm GROUNDING CABLE AVAILABLE ON REQUEST! Hfodpfsv Rbdtjx Ag Rjr

Kondisi: bekas, Technical details: Outreach min.: 2600 mm Outreach max.: 4200 mm Boom position: 360° swiveling Hfjdpfsu Nlqfsx Ag Rer Machine weight approx.: 1.5 t WELDING STAND for positioning a welding torch/welding unit on large, expansive workpieces. - Base frame diameter: 1480 mm - All adjustments are manual. Sale without welding unit. As is. *

Kondisi: bekas, Technical details: Welding current: 520 A Length: 1200 mm Hodpfjwc R Udox Ag Rsfr Height: 1100 mm Approx. machine weight: 147 kg Dimensions (L x W x H): 1.2 x 0.75 x 1.1 m Welding process: TIG/E/MIG-MAG Scope of delivery: Welding transformer, wire feeder, cooling unit Protection class: IP23C Insulation class: B/H

Kondisi: bekas, Technical details: Welding current, stepless: 320 / 100 A Protection class: IP21 Total power requirement: 17 kVA Machine weight approx.: 132 kg Machine dimensions: 1.3 x 0.5 x 0.9 m - TIG welding with direct current - TIG welding with pulsed current - Manual arc welding (MMA) Control: Switchable 2/4 stroke, spot welding, stepless adjustment New components include: - Hose package 4.0 meters, water-cooled - Ground clamp and ground cable 4.0 meters Hsdpfxeu Nwa Sj Ag Rsfr - Pressure regulator - TIG welding torch ERGO 301

Kondisi: bekas, Technical details: Output at 100% duty cycle: 400 A Output at 60% duty cycle: 500 A Welding current: Direct current (DC) Approx. machine weight: 230 kg Machine dimensions: 1.05 x 0.70 x 1.2 m Power rating: 21 kVA Welding rectifier MIG / MAG Cooling type: F Protection class: IP 23 Insulation class: F Including wire feed unit, feed rate 0.5 – 20 m/min Hjdpfx Aou Nwcteg Rofr No hose package included

Kondisi: bekas, Technical details: Power consumption: 240 A Voltage: 3x400 V Open circuit voltage: 91 V Apparent power: 9.3 kVA Approx. machine weight: 28 kg Machine dimensions: 1.0 x 0.6 x 1.0 m Welding Rectifier (Inverter) TIG (for steel/stainless steel and manual stick welding) Direct current TIG: up to 240 A / 19.6 V Manual arc welding (MMA): up to 240 A / 19.6 V 2-/4-stroke mode, infinitely variable switch to pulse Protection class IP 23 Water-cooled with antifreeze protection Torch head gas-cooled with remote control for welding current Shielding gas / solenoid valve Equipment: Hfedpfsu U Ihzjx Ag Rsr Hose package 7.0 meters Ground clamp and ground cable 3.3 meters

Kondisi: bekas, Technical Details: Welding current: 440 V Approximate machine weight: 242 kg Dimensions (L x W x H): 1.5 x 0.8 x 1.3 m MIG/MAG Control: with 2/4-stroke selector and 3x12 welding settings Cooling system: water-cooled with antifreeze protection Shielding gas with solenoid valve and pressure regulator Welding torch assembly, 3.6 m hose package Torch head Ground clamp with 4.8 m ground cable Wire feed unit with 4-roll drive for wire diameters: Ø 1.0 mm / Ø 1.2 mm Hodpfx Aovz Advsg Refr