Beli pemanas & kipas bekas (276)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, suitable for e.g. workshops, warehouses (frost protection), greenhouses, barns, conservatories, camping awnings ready to use immediately – just plug in and switch on clean combustion – no chimney required highly economical – fuel consumption approx. 2 litres per day app-controlled – set temperature, receive notifications and monitor fuel level via smartphone Ncodpjqvlw Isfx Agljl thermostat for automatic operation, adjustable range 0–40°C dry heat – no condensation like with gas mobile use thanks to four swivel castors operates with biodiesel or diesel/red diesel low noise – only 48 dB no dust – no fan no exhaust fumes – emits no burning odour compliant with latest EU emissions regulations automatic restart after power failure

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Patented electric heating solution for efficient and comfortable heating. Nsdpfxeqvmcpo Aglocl Heating output: 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) Suitable for approximately 10–35 sqm area at around 2.5 m ceiling height Connected load: 11.8 A Dimensions: 54 x 29 x 80 cm Weight: 15 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Suitable for applications such as workshops, warehouses (frost protection), greenhouses, barns, conservatories, and camping awnings. Ready for immediate use – simply plug in and switch on. Clean combustion – no chimney required. Highly economical – fuel consumption approx. 2.5 litres per day. App-controlled – set temperature, receive notifications, and monitor fuel level directly on your smartphone. Thermostat for automatic operation, adjustable range 0–40°C. Dry heat – no condensation as with gas heaters. Mobile operation thanks to four swivel castors. Runs on biodiesel, diesel, or red diesel. Quiet operation – only 48 dB. Ncedpoqvlu Eefx Aglsl No dust – no fan required. No exhaust fumes – emits no burning odour. Compliant with the latest EU emissions directive. Automatic restart after power outage.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, suitable for applications such as workshops, warehouses (frost protection), greenhouses, barns, conservatories, and camping awnings Ready to use immediately – just plug in and switch on Clean combustion – no chimney required Highly economical – fuel consumption approx. 4 L per day App-controlled – set temperature and check messages and fuel level directly on your smartphone Ncodjqvlvmepfx Agljl Thermostat for automatic operation, adjustable range 0–40°C Dry heat – no condensate as with gas heaters Mobile use thanks to 4 swivel castors Operates on biodiesel or diesel/red diesel Low noise – only 48 dB No dust – no fan required No exhaust fumes – emits no burning odour Complies with the new EU emissions directive Automatic restart after power outage

Kondisi: baik (bekas), Tahun pembuatan: 2011, Temperature control unit, heater, hot water boiler, hydronic system, hydraulic station for high-pressure cleaners, high-pressure pump -Temperature control units for: Water -Electric heater for: High-pressure cleaners, high-pressure pump -Manufacturer: Frigotrol -Type: S-TT 50/108-D -Power rating: 110 kW -Connection: -Permissible operating overpressure: 6 bar -Dimensions: 1548/890/H1630 mm Ncsdpeqw D Dpjfx Aglsl -Weight: 380 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0324R004636, daya: 349 kW (474,51 hp), tekanan: 6 batang, suhu: 110 °C, kapasitas tangki: 495 l, bahan bakar: gas rumah tangga H, tekanan kerja: 6 batang, Boiler RIELLO RTS349 3S. Tahun pembuatan: 2022. Jam operasional rendah: 500 jam. Tersedia opsi pembelian lini cuci botol lengkap: mesin cuci PAC (4500 botol/jam), blower udara, boiler RIELLO, dan konveyor. Ncjdpfxsx R Uins Aglel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Dijual burner bahan bakar ganda (minyak/gas) merek Weishaupt RGL50 - 4000 kW, dalam kondisi berfungsi dan sangat terawat, termasuk peralatan gas, tahun pembuatan 2004. Weishaupt RGL50/1-B (4000 kW) - Daya: 550-4000 kW 55-336 kg/jam - Tipe: ZM-NR - Tekanan koneksi: 15-500 mbar (selanjutnya: tekanan koneksi: 30-140 mbar) - Pengiriman tersedia atas permintaan - Semua data teknis dapat dilihat pada gambar - Gambar tambahan dan berukuran lebih besar tersedia atas permintaan Penjualan diutamakan kepada dealer, pelaku usaha, atau untuk ekspor. Semua informasi tanpa jaminan, kesalahan dan penjualan sementara dapat terjadi. Penjual tidak bertanggung jawab atas kesalahan pengetikan dan transmisi data. Nsdsia N Ipopfx Aglocl

Kondisi: baru, Offer of 1,230 LOKITEC Oil-Filled Electric Radiators This lot of high-quality electric oil-filled radiators from LOKITEC offers an efficient and comfortable heating solution for various residential and commercial environments. Featuring impressive wattage and a wide range of smart features, these radiators deliver pleasant warmth and maximum comfort. Certifications: All oil-filled radiators are CE, ROHS, and CB certified, guaranteeing safety and quality according to international standards. These radiators provide an outstanding combination of performance, efficiency, and comfort, making them ideal for use in diverse settings. With robust construction and extensive features, they represent a reliable solution for cold winter days. Quantity: 1,230 units Brand new *RRP Total: €190,510 Unit price: €65.04 net Transport can be organized upon request. Technical Data and Specifications: 1. LOKITEC Oil-Filled Radiator LK-K509M – 2000W Article number: KNSC20K509B - Max. power output: 2000W - Voltage: 220V – 240V / 50-60Hz - Dimensions (cm): 46.8 x 15.8 x 66.5 - Weight (kg): 10.7 - Cable: VDE - Heat settings: 3 - Heating elements: 9 - Oil channels: 5 - Overheat protection: ✔️ - Adjustable thermostat: ✔️ - Frost protection: ✔️ - ECO function: ✔️ - Timer: ❌ - Electronic control: ❌ - Remote control: ❌ - Auto thermal shutdown: ✔️ - Tip-over switch: ✔️ - Indicator light: ✔️ - SmartSnap wheels: ✔️ Quantity: 220 units RRP: €129 each Njdpfx Agou Nzztsljcl 2. LOKITEC Oil-Filled Radiator LK-K511M – 2500W Article number: KNSC25K511B - Max. power output: 2500W - Voltage: 220V – 240V / 50-60Hz - Dimensions (cm): 54.5 x 15.8 x 66.5 - Weight (kg): 12.6 - Cable: VDE - Heat settings: 3 - Heating elements: 11 - Oil channels: 5 - Overheat protection: ✔️ - Adjustable thermostat: ✔️ - Frost protection: ✔️ - ECO function: ✔️ - Timer: ❌ - Electronic control: ❌ - Remote control: ❌ - Auto thermal shutdown: ✔️ - Tip-over switch: ✔️ - Indicator light: ✔️ - SmartSnap wheels: ✔️ Quantity: 203 units RRP: €149 each 3. LOKITEC Oil-Filled Radiator LK-Y409W – 2000W Article number: YOHX20K409B - Max. power output: 2000W - Voltage: 220V – 240V / 50-60Hz - Dimensions (cm): 45.2 x 15.8 x 66.5 - Weight (kg): 10 - Cable: VDE - Heat settings: 3 - Heating elements: 9 - Oil channels: 4 - Overheat protection: ✔️ - Adjustable thermostat: ✔️ - Frost protection: ✔️ - ECO function: ✔️ - Timer: 24h – Programmable - Electronic control: ✔️ - Remote control: ✔️ – WIFI + APP - Auto thermal shutdown: ✔️ - Tip-over switch: ✔️ - Indicator light: ✔️ - SmartSnap wheels: ✔️ Quantity: 110 units RRP: €169 each 4. LOKITEC Oil-Filled Radiator LK-Y411W – 2500W Article number: YOHX25K411B - Max. power output: 2500W - Voltage: 220V – 240V / 50-60Hz - Dimensions (cm): 45.2 x 15.8 x 66.5 - Weight (kg): 12 - Cable: VDE - Heat settings: 3 - Heating elements: 11 - Oil channels: 4 - Overheat protection: ✔️ - Adjustable thermostat: ✔️ - Frost protection: ✔️ - ECO function: ✔️ - Timer: 24h – Programmable - Electronic control: ✔️ - Remote control: ✔️ – WIFI + APP - Auto thermal shutdown: ✔️ - Tip-over switch: ✔️ - Indicator light: ✔️ - SmartSnap wheels: ✔️ Quantity: 100 units RRP: €189 each

Kondisi: bekas, Heating fan, heater, heat exchanger, air heater, air warmer, duct air heater, duct-type air heater, heating coil - Delivery: as-is condition as inspected - Fan motor: missing - Manufacturer: Kampmann, air heater heat exchanger - Type: Tip 5000 - Output: kW - Fan: missing - Operating pressure: max 10 bar Ncjdevrdr Nopfx Aglsl - Dimensions: 800/710/H740 mm - Weight: 27 kg

Kondisi: baik (bekas), Heating blower, electric heater, heater, electric air heater, electric heating blower, heat exchanger, air heater, air warmer, duct air heater, duct air warmer -JEVi .: 21023007 -Type: EFFK -Power: 30 kW -Voltage: 3 x 476 V -Dimensions: 460/350/H565 mm Nodpefixa Esfx Aglocl -Weight: 29 kg

Kondisi: baik (bekas), Ventilation system, comfort compact ventilation - Air flow rate: 6,000 m³/h - Motor power: 1.85 kW - Dimensions: 1950 x 1100 x H1200 mm Ncodob A Hxmepfx Aglel - Weight: 260 kg

Kondisi: bekas, Unit Tempering, Unit Tempering Cair, Unit Tempering Industri, Thermolator, Tool-Temp TT134, Mesin Bekas Produsen: Tool-Temp Tipe: TT 134 Dimensi keseluruhan: 390 x 1030 x 1070 mm Tahun: 2012 Fitur: - Sistem kontrol mandiri (mikroprosesor) - Sistem pembuangan otomatis - Pemantauan dan indikasi suhu Ncsdpfex Emd Tsx Aglsl - Pengisian air otomatis - Kontrol suhu jarak jauh dan internal - Ventilasi udara otomatis - Pengoperasian dengan media air dan oli Suhu Maks.: 140 °C | 18–24 kW Pendinginan: 50.000 kcal/jam Tekanan pompa maks.: 4 bar | 100 l/menit

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Dijual burner gas merek Weishaupt yang berfungsi dengan baik dan dalam kondisi sangat terawat: 1. Weishaupt G30/2-A, 1800 kW dengan gas train Dungs DN 65 2. Weishaupt WM G20/2-A, 1600 kW dengan gas train 1. Weishaupt WM G20/2-A - Daya: 300 - 1800 kW - Tekanan masuk: 15 - 500 mbar - Tipe: ZM-LN - Tahun produksi: 2006 2. Weishaupt WM G20/2-A - Daya: 250 - 1600 kW Ncjdpfewgkpisx Aglel - Tekanan masuk: 15 - 500 mbar - Tipe: ZM-LN - Tahun produksi: 2008

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation Nodpfx Asvz Hq Tjgljcl - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm Ncsdpfx Ajvz Hq Hsgljl - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Nedsvz Hqyjpfx Agljcl Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h Ncjdpfjvz Hqtsx Aglol - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² Nedpfxjvz Hqms Aglocl - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 Njdpjvz Hqgefx Aglecl The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% Nedpfxjvz Hhxe Aglecl - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: sangat baik (bekas), Gas and oil burners, oil burner filter, heating oil filter, filter and deaerator unit, heating oil deaerator Nedpfomiqmrex Aglocl -Manufacturer: Oilon, filter and deaerator unit unused in original packaging -Type: Oilon Plus -Technical data: see photo of nameplate -Carton dimensions: 370/180/H150 mm -Weight: 1.8 kg

Kondisi: baik (bekas), Tahun pembuatan: 1994, Electric heat exchanger, swimming pool heater, heat exchanger - 400 VAC, 26.0 A Nedpfx Ageb A H S Eelocl - Pressure: max. 3 bar - Dimensions: 980/180/H180 mm - Weight: 3.1 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, WTT-001 Nodpfx Asghh Txogljcl

Kondisi: baik (bekas), Tahun pembuatan: 1981, Heater, burner, gas burner Ncodeb A Iy Dopfx Aglel -Gas type: natural gas, liquid -Gas connection: 20 mbar to 1000 mbar -Nominal thermal output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, daya: 400 kW (543,85 hp), Perlengkapan: Pelat tipe tersedia, We are selling our 400 kW heating boiler, which was previously used to supply heat to our drying chambers. Since the drying chambers are no longer in use, the boiler is now surplus to our requirements. The scope of supply includes: - Walking floor - Registration/documentation Ncjdpjq U R Sgsfx Aglel - Boiler unit - Ash conveyor with container - Various piping - Heating control system Price is excluding 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. The boiler can be inspected by appointment only. Please note: since the heat extraction is no longer possible, test firing or live demonstrations cannot be offered. Due to the building structure, removal of the boiler will likely only be possible via the roof. The boiler was professionally inspected by a certified company on June 5, 2024, and is fully operational and ready for use.