Beli Gunting pelat hidrolik, ketebalan potong 5–7 mm bekas (173)

Kondisi: baru, Bernardo Hydraulic Guillotine Shear HSB 2000 x 6 Cutting length: 2000 mm Max. sheet thickness*: 6 mm Cutting angle: 1° 45’ Motorized backgauge: 0 – 600 mm Strokes per minute: 12 Number of hold-downs: 8 pcs. Table height: 800 mm Support arms: 3 pcs. Oil tank: 100 liters Motor power: 7.5 kW Length: 2800 mm Depth: 2800 mm Height: 1670 mm Approx. weight: 3925 kg Nlsdpfx Asqpfwysl Toh * Material tensile strength 400 N/mm² Scope of delivery: • Adjustable cutting gap • Cutting line illumination • Motorized NC backgauge • Front sheet supports • Side stop • Angle stop • Safety guard with photoelectric sensors • E21S control unit • Foot pedal with emergency stop • Blades made of tool steel

Tahun pembuatan: 1987, Kondisi: bekas, nomor mesin/kendaraan: 687 T, Working width: 3050 mm Nsdpfx Alsb N Erbo Tjlh Sheet thickness: 6 mm Throat depth: 200 mm Back gauge: 1000 mm Drive power: 15 kW Space requirements: 4100 x 2300 x 2100 mm Weight: 8500 kg

Tahun pembuatan: 1990, Kondisi: baik (bekas), nomor mesin/kendaraan: 603, Working width: 3050 mm Sheet thickness: 6 mm Nodpfx Aledzrpws Tolh Back gauge: 650 mm Drive power: 380 V, 16 kW Space requirements: 3680 x 2060 x 1870 mm Weight: 7580 kg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 13.707, lebar kerja: 6.200 mm, ketebalan lembaran (maks.): 6 mm, daya: 11 kW (14,96 hp), berat keseluruhan: 17.500 kg, kedalaman tenggorokan: 60 mm, RINCIAN TEKNIS Ketebalan lembaran maksimum: 6 mm Lebar kerja maksimum: 6.200 mm Jarak overhang: 60 mm Jenis penghenti: Elektrik Kedalaman penghenti: 1.000 mm Pengaturan sudut: Motorik Perangkat penyangga lembaran: Pneumatik RINCIAN MESIN Nlsdpozuwzrsfx Al Tjh Daya: 11 kW Jenis penggerak: Hidrolik Sistem kendali: Konvensional Sistem pengontrol: Elgo Dimensi & Berat Panjang keseluruhan: 6.400 mm Berat pengangkutan: 17.500 kg PERLENGKAPAN Sertifikat CE Dokumentasi

Kondisi: baru, Kondisi baru Njdpfx Aewiqw Sjl Telh Waktu pengiriman sekitar 12 minggu setelah pemesanan Negara asal: Turki Harga: 56.100 € Tarif sewa: 1.060,29 € Panjang potongan: 4100 mm Ketebalan pelat maks. – baja konstruksi: 6 mm Ketebalan pelat maks. – baja tahan karat: 4 mm Jarak overhang pada penyangga samping: 50 mm Jumlah langkah: 12 1/menit Sudut potongan: 1,5° Jumlah penekan: 20 Tekanan penekan: 17 ton Penghenti belakang: 1000 mm Kecepatan penghenti belakang: 200 mm/detik Daya motor: 15 kW Tangki oli: 200 l Lengan penyangga: 3 buah Tinggi meja: 865 mm Lebar meja: 580 mm Panjang meja: 4510 mm Panjang: 5230 mm Lebar: 2300 mm Lebar total dengan lengan penyangga dan pelindung belakang: 3600 mm Tinggi: 2150 mm Berat: 11460 kg Model pemotongan berosilasi Kontrol pra-pemilihan NC D-Touch 7 dengan layar sentuh untuk penghenti belakang, panjang potongan, jumlah, koneksi USB Penghenti belakang motor hingga 1.000 mm pada spindel bola, dapat dilipat Panel kontrol yang jelas dipasang pada lengan ayun Penekan hidrolik diposisikan dekat dengan tepi potongan Sakelar kaki Penyesuaian celah pemotongan manual terpusat Pencahayaan garis potongan Meja penyangga yang lebar dengan bola geser Penghitung potong Langkah tunggal dan berkelanjutan Pelindung jari yang dapat dilipat: 1.000 mm 1 penghenti samping: 1.500 mm dengan skala, alur-T, dan cam kemiringan 2 lengan penyangga pelat: 1.000 mm dengan alur-T Pisau yang mudah diganti dan diasah Panjang potongan yang dapat diatur untuk pemrosesan yang efisien Pisau bawah: dapat diputar 4 arah Pisau atas: dapat diputar 2 arah Pengisian oli Sensor cahaya di bagian belakang mesin Layanan pelanggan yang berkualitas Panduan pengoperasian dalam BAHASA JERMAN dan BAHASA INGGRIS Peralatan sesuai dengan peraturan CE (Foto ilustrasi) KAMI MEMILIKI LEBIH DARI 850 REFERENSI!

Kondisi: baru, en-ERMAK_HGS_hydraulic_swing_beam_shear_listing Nsdpfx Aexabzgjl Tjlh

Kondisi: baru, Sheet width: 2,100 mm Sheet thickness: 6.0 mm (ST 42) Sheet thickness (stainless steel): 4.0 mm (VA) Cutting angle: 1.2° Stroke rate: 28 strokes/min Oil capacity: 150 l Hold-downs: 11 units Control: CYBELEC CybTouch Motor power: 11.0 kW Backgauge – adjustable: 1,000 mm Njdoxaa Acepfx Al Tjlh Table height: 800 mm Weight: 4,500 kg Dimensions (L x W x H): 3,010 x 2,100 x 1,640 mm Manufacturer ERMAK offers you a robust and durable machine for economic sheet metal processing with the hydraulic swing beam shear, model series HGS. This compact all-round machine allows you to increase your productivity. The hydraulic swing beam shear, model HGS, enables precise, fast, and cost-effective cutting in your daily workflow. The use of hydraulic hold-downs to secure the sheet and the support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control allows selection of various sheet types already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically set by the CNC control via electro-hydraulics, but can be adjusted manually if required. The position and retract function of the motorized backgauge can easily be set via touchscreen. In addition, the control provides memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touch screen * including CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touch screen controller, model "CybTouch 8" - some functions of the CNC control: * Backgauge presetting – X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material presetting, including sheet thickness * Cutting line illumination (cutting to scribe line), and more - Motorized backgauge, travel path = 5.0 – 1,000 mm (X axis) * with ball screw spindles * automatic swing-up at maximum travel for longer cuts * selectable retract function ("swing-away function") * positioning accuracy 0.1 mm * travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in front support table - Folding finger guard with safety switch * finger guard with viewing windows for cutting to scribe - Cutting line illumination with shadow outline - BOSCH/HOERBIGER hydraulic unit - SIEMENS electrical system - Light curtain behind the machine (safety device) - Free-moving foot switch - CE mark / Declaration of conformity - Operating manual + electrical diagram + hydraulic diagram

Kondisi: baru, Sheet width: 3,100 mm Sheet thickness: 6.0 mm Frame gap: 3,100 mm Hold-down devices: 14 pcs Strokes: 16 - 24 strokes/min Oil capacity: 150 liters Shear angle: 0.5 - 1.5° Sheet thickness (stainless steel): 4.0 mm Gap between frame and blade: 350 mm Motor power: 11.0 kW Machine weight: approx. 7,060 kg Dimensions (L x W x H): 4,100 x 2,200 x 2,190 mm Manufacturer ERMAK offers you the HVR series of hydraulically guided guillotine shears—robust and durable machines for efficient sheet metal processing. This compact all-rounder increases your productivity. The HVR hydraulic guillotine shear supports you with precise, rapid, and cost-effective cuts in your daily operations. Hydraulic hold-downs ensure sheet fixation, and the support table with integrated ball transfers allows ergonomic, efficient cutting for operators. The CNC control enables selection of various materials already stored in the materials library. After selecting maximum thickness and material type, the optimal cutting gap and shear angle are set automatically via CNC-controlled electro-hydraulics, but can also be adjusted manually. The motorized backgauge position and retract function can be set easily via touchscreen. Furthermore, the controller provides memory for cutting programs and sequences. ----- Robust, electro-hydraulic CNC swing-beam guillotine shear * including CYBELEC CNC touchscreen control * including CNC electro-hydraulic knife gap adjustment Nodpoxaag Uofx Al Tjlh * including CNC electro-hydraulic shear angle adjustment ----- Equipment: - CNC electro-hydraulic swing-beam guillotine shear - incl. CYBELEC CNC touch screen controller, model "CybTouch 8" - Some CNC controller functions: * Backgauge preset - X axis * Knife gap adjustment * Piece count * Cutting length limitation * Material selection, incl. sheet thickness * Cutting line illumination (cutting on scribe line), and much more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis) * With ball screw spindles * Automatically swing-up at maximum stroke for longer cuts * Incl. retract function selectable ("Swing-Away function") * Positioning accuracy 0.1 mm * Travel speed approx. 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers on the front support table - Folding finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cutting line lighting with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Free-standing foot pedal - CE marking/conformity declaration - Operating manual + wiring diagram + hydraulic diagram

Kondisi: baru, Sheet width: 3100 mm Nedpfx Asxaa Rgjl Telh Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Hold-down devices: 14 units Strokes per minute: 20 spm Cutting angle: 1.2° Control: CYBELEC CybTouch Working height: 800 mm Oil capacity: 150 l Total power requirement: 11.0 kW Weight: 5500 kg Dimensions (L x W x H): 4,000 x 2,410 x 1,640 mm The manufacturer ERMAK offers you, with the HGS hydraulic swing beam shear series, a robust and durable machine for economical sheet metal processing. This compact all-rounder enables you to increase your productivity. The HGS hydraulic swing beam shear supports you with precise, fast, and cost-effective cutting in your daily operations. Thanks to hydraulic hold-down devices for securing the sheet and the support table with integrated ball rollers, ergonomic and efficient cutting is ensured for your operator. The CNC control allows for easy selection of various sheet types, which are already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically adjusted electro-hydraulically via the CNC controller, but can also be set manually. The position and retract function of the motorized backgauge can be easily set via the touchscreen. In addition, the controller features program memory for cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Includes CYBELEC CNC touch screen control * Includes CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Includes CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected functions of the CNC control system: * Backgauge pre-selection (X-axis) * Cutting gap adjustment * Piece count * Cutting length limitation * Material pre-selection, including sheet thickness * Cutting line illumination (cutting to scribed line), and many more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X-axis) * With precision ball screws * Automatically retractable at maximum travel for longer cuts * Includes selectable retract function ('Swing-Away Function') * Positioning accuracy: 0.1 mm * Traversing speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * Finger guard with inspection windows for cutting to scribe - Cutting line illumination with shadow effect - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Freely movable foot switch - CE mark / Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram

Kondisi: baru, Sheet width 4100 mm Sheet thickness 6.0 mm Sheet thickness (stainless steel) 4.0 mm Hold-downs 18 pcs Strokes 15 strokes/min Oil capacity 150 ltr. Cut angle 1.2° Control CYBELEC Cybtouch Backgauge – adjustable 1000 mm Working height 800 mm Motor power 11.0 kW Weight 8,100 kg Dimensions L-W-H 5000 x 2410 x 1650 mm The manufacturer ERMAK offers you, with its HGS hydraulic swing beam shear series, a robust and durable machine for the economical processing of sheet metal. This compact all-round machine allows you to increase your productivity. The HGS hydraulic swing beam shear supports you with precise, fast, and cost-efficient cutting in your daily operations. Thanks to hydraulic hold-downs for securing the sheet and a support table with integrated ball rollers, ergonomic and efficient cutting for your operator is ensured. The CNC control allows the use of different sheet types that are already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically set by the CNC control via electro-hydraulic adjustment, but can also be adjusted manually. The position and retract function of the motorized backgauge can be easily set via touchscreen. Additionally, the control system features a memory for cutting programs with cut sequences. ----- Robust electro-hydraulic CNC swing beam shear * Includes CYBELEC CNC touch screen control * Includes CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Incl. CYBELEC CNC Touch Screen Controller, Model "CybTouch 8" - Some CNC control functions: * Backgauge preset – X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cut line illumination (cutting to scribe line) … and many more - Motorized backgauge, travel = 5.0 – 1,000 mm (X axis) * On ball screw spindles * Automatically swing-up at max. travel for longer cuts * Includes selectable retract function ("Swing-Away Function") * Positioning accuracy 0.1 mm * Travel speed 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball rollers in front support table - Foldable finger guard with safety switch * Finger guard with viewing windows for cutting to scribe line - Cut line illumination with shadow outline - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Free-moving foot switch - CE mark/Declaration of Conformity Nedpfxexaa R Te Al Telh - Operating manual + circuit diagram + hydraulic diagram

Kondisi: baru, Sheet width: 3,100 mm Sheet thickness: 6.0 mm Sheet thickness (stainless steel): 4.0 mm Frame width: 3,100 mm Hold-downs: 14 units Oil capacity: 150 l Stroke rate: 18 strokes/min Cutting angle: 1.2° Control: CYBELEC CybTouch Total power requirement: 11.0 kW Weight: 6,300 kg Dimensions (L x W x H): 4,000 x 2,100 x 1,640 mm The manufacturer ERMAK offers you a robust and durable machine for cost-effective sheet metal processing with its HGS hydraulic swing beam shear series. This compact all-rounder helps you increase your productivity. The HGS hydraulic swing beam shear supports you in precise, fast, and cost-efficient cutting operations in your daily workflow. Hydraulic hold-downs for securing the sheet and the support table with integrated ball transfers ensure ergonomic and efficient cutting for your operator. The CNC control enables the use of various sheet types saved in the material library. After selecting the maximum thickness, the optimal blade gap is automatically set by the CNC control via electro-hydraulic adjustment, but can also be set manually. The position and retraction function of the motorized back gauge can be easily set via the touchscreen. The control system also offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC Touch Screen control * Including CNC electro-hydraulic blade gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC CNC touch screen controller, model "CybTouch 8" - Selected CNC control functions: * Back gauge preselection – X axis Njdpfx Alexaa D Ho Tslh * Blade gap adjustment * Piece counter * Cutting length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribe line) and many more - Motorized back gauge, travel range = 5.0 – 1,000 mm (X axis) * On ball screw spindles * Automatically swing-up at maximum travel range for longer cuts * Including selectable retraction function ("swing-away function") * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfers on the front support table - Flip-up finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cutting line lighting with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Mobile foot switch - CE marking/Declaration of Conformity - Operation manual + wiring diagram + hydraulic circuit diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Kondisi: baru, Sheet width: 3,100 mm Sheet thickness: 6.0 mm Frame gap: 3,100 mm Njdoxabcqjpfx Al Telh Hold-downs: 14 units Strokes: 16 - 24 strokes/min Oil capacity: 150 l Cutting angle: 0.5 - 1.5° Sheet thickness for stainless steel: 4.0 mm Throat depth: 350 mm Motor power: 11.0 kW Machine weight approx.: 7,060 kg Dimensions (L x W x H): 4.1 x 2.2 x 2.19 m Manufacturer ERMAK offers you, with the HVR series hydraulic swing beam guillotine shear, a robust and durable machine for efficient sheet metal processing. This compact all-round machine can help you increase your productivity. The HVR hydraulic guillotine shear supports you in performing precise, fast and cost-effective cuts in your daily operations. Thanks to the hydraulic hold-downs that securely clamp the sheet and the support table with integrated ball transfer units, ergonomic and efficient cutting is guaranteed for your operator. The CNC controller enables the use of different sheet materials, all of which are already stored in the material library. After selecting maximum thickness and material type, the optimum blade gap and cutting angle are automatically adjusted via the CNC-controlled electro-hydraulic system, but can also be set manually if required. The position and retraction function of the motorised back gauge can be easily set via touchscreen. In addition, the controller offers memory for cutting programs with cutting sequences. ----- Robust electro-hydraulic CNC swing beam guillotine shear * including CYBELEC CNC touch screen control * including CNC electro-hydraulic blade gap adjustment * including CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic swing beam guillotine shear - including CYBELEC CNC touch screen controller, model "CybTouch 8" - Some functions of the CNC control system: * Back gauge preset - X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (for scribed cutting) ... and many more - Motorised back gauge, travel range = 5.0 - 1,000 mm (X axis) * via ball screw drives * Automatically swings up at maximum travel range for longer cuts * With selectable retraction function ("Swing-Away function") * Positioning accuracy: 0.1 mm * Approx. travel speed: 80 mm/sec - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfer units in the front table - Foldable finger guard with safety switch * Finger guard with sight windows for scribed cutting - Cutting line illumination with shadow line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear of the machine (safety feature) - Free-moving foot pedal switch - CE mark/Declaration of Conformity - Operating manual + wiring diagram + hydraulic diagram Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Kondisi: baru, Kondisi: baru Waktu pengiriman: sekitar 12 - 14 minggu setelah pemesanan Negara asal: Turki Harga: 129.800 € Tarif sewa: 2.453,22 € Panjang pemotongan: 6.080 mm Ketebalan lembaran maksimum - baja konstruksi: 6 mm Ketebalan lembaran maksimum - baja tahan karat: 4 mm Jangkauan pada penyangga samping: 350 mm Jumlah langkah: 10 1/min Sudut pemotongan: 0,5 - 2° Jumlah penjepit: 29 Tekanan penjepit: 20 ton Penyangga belakang: 1000 mm Kecepatan penyangga belakang: 200 mm/detik Daya motor: 22 kW Tangki oli: 200 l Lengan penyangga: 5 buah Tinggi meja: 900 mm Lebar meja: 630 mm Panjang meja: 6.370 mm Panjang: 7.300 mm Lebar: 2.150 mm Lebar total dengan lengan penyangga dan pelindung belakang: 3.400 mm Tinggi: 2.750 mm Berat: 25.500 kg Desain mekanisme Kontrol layar sentuh CNC D-touch 7 untuk penyangga belakang, sudut pemotongan, celah pemotongan, panjang pemotongan, dan jumlah potong Koneksi USB Penyesuaian celah pemotongan yang dikontrol CNC melalui meja (dipatenkan) Pendingin oli Nodpfxewiqygo Al Tjlh Pelumasan terpusat manual Pencahayaan garis pemotongan Sekrup bola yang dapat diangkat untuk penyangga belakang Bola pada meja Pelindung jari yang dapat diangkat, 1.000 mm Penyangga samping dengan alur-T, penyangga miring, dan skala 5 lengan penyangga dengan alur-T Pengisian oli Sensor cahaya di bagian belakang mesin Panduan pengoperasian dalam bahasa JERMAN dan INGGRIS HARGA FCA TURKI (Foto ilustrasi)

Kondisi: baru, Sheet width: 2600 mm Sheet thickness: 8.0 mm Sheet thickness (stainless steel): 5.0 mm Hold-downs: 12 units Strokes per minute: 18 Oil capacity: 200 ltr. Cutting angle: 1.5° Motor power: 15.0 kW Machine weight approx.: 6,300 kg Dimensions (L x W x H): 3525 x 2350 x 1700 mm The manufacturer ERMAK offers you, with the hydraulic swing beam shear of the HGS model series, a robust and durable machine for the efficient processing of sheet metal. This compact all-round machine helps you increase your productivity. The hydraulic swing beam shear, model HGS, supports you in achieving precise, fast, and cost-efficient cuts in your daily workflow. The use of hydraulic hold-downs to clamp the sheet and the support table equipped with built-in ball rollers ensure ergonomic and efficient cutting for your operator. The CNC control enables the use of various types of sheets already stored in the material library. Upon selection of the maximum thickness, the optimal cutting gap is automatically set electro-hydraulically via the CNC control, but can also be adjusted manually. The position and retraction function of the motorized backgauge can be easily set via the touchscreen. Moreover, the control offers memory for cutting programs with cut sequences. ----- Nedpfx Aoxab D Ijl Tslh Robust electro-hydraulic CNC swing beam shear * including CYBELEC CNC touchscreen control * including CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - including CYBELEC CNC touchscreen controller, model "CybTouch 8" - Selected functions of the CNC control: * Backgauge preselection - X axis * Cutting gap adjustment * Piece counter * Cutting length limitation * Material preselection, including sheet thickness * Cut line illumination (cutting along scribe lines) .. and much more - Motorized backgauge, travel range = 5.0 - 1,000 mm (X axis) * on recirculating ball screws * automatic swing-up at maximum travel for longer cuts * including selectable retraction function ("Swing-Away Function") * positioning accuracy 0.1 mm * travel speed 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch * finger guard with viewing windows for scribe line cutting - Cut line illumination with shadow line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Safety light curtain behind the machine - Freely positionable foot switch - CE mark/declaration of conformity - Operating manual + circuit diagram + hydraulic diagram

Kondisi: baru, Sheet width: 4100 mm Sheet thickness: 10.0 mm Sheet thickness (stainless steel): 6.0 mm Nlsdpjxabwuofx Al Tjh Hold-downs: 28 units Strokes per minute: 18 Oil capacity: 260 liters Cutting angle: 0.5 - 2° Control system: CYBELEC Cybtouch Motor power: 22.0 kW Backgauge (adjustable): 1000 mm Dimensions (LxWxH): 6100 x 2580 x 2460 mm Weight: 15,100 kg The manufacturer ERMAK presents the HVR series hydraulic swing beam guillotine shear—a robust and durable solution for the efficient processing of sheet metals. This compact, all-round machine will help increase your productivity. The HVR hydraulic guillotine shear supports you in achieving precise, rapid, and cost-effective cuts as part of your daily workflow. Hydraulic hold-downs ensure secure sheet fixation, while the support table with integrated ball transfers guarantees ergonomic and efficient operation for the operator. The CNC control system provides access to a range of pre-configured sheet types in its material library. Upon selecting the maximum thickness and material type, the optimal blade gap and cutting angle are automatically set electro-hydraulically by the CNC system, but can also be adjusted manually. The position and retract function of the powered backgauge can be easily set via touchscreen. Additionally, the controller offers a storage for cutting programs including cutting sequences. ----- Robust electro-hydraulic CNC swing beam guillotine shear * includes CYBELEC CNC touchscreen control * includes CNC electro-hydraulic blade gap adjustment * includes CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic swing beam guillotine shear - Includes CYBELEC CNC touchscreen controller, model "CybTouch 8" - Key CNC functions: * Backgauge preselection – X axis * Blade gap adjustment * Piece counter * Cutting length limitation * Material preselection, including sheet thickness * Cutting line illumination (cutting to scribe line), and much more - Motorized backgauge, travel range: 5.0 – 1000 mm (X axis) * Ball screw drives * Automatically flips up at maximum position for longer cuts * Retract function selectable (“Swing-Away function”) * Positioning accuracy: 0.1 mm * Approximate travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball transfers on the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for scribe cutting - Cutting line illumination with shadow-line - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety feature) - Foot pedal, movable - CE mark / Declaration of conformity - Operating manual + wiring diagram + hydraulic schematic Including special equipment: - Pneumatic sheet support device for thin sheet cutting * Monobloc design

Kondisi: baik (bekas), motorized backgauge foot switch Technical data: Max. cutting capacity (sheet thickness): 6 mm Max. cutting length: 2035 mm Backgauge travel: 1000 mm Distance between columns: 2000 mm Drive capacity: 11 kW Nlodpfxohtq N Ne Al Toh Weight: 3500 kg Technical data, accessories, and machine description are not binding.

Kondisi: baru, 1 brand-new hydraulic swing beam shear (unused showroom machine) Manufacturer: LAMI NOVA Model: SC 2006 Maximum cutting length: 2,100 mm Nedpfx Asd Ad A Eol Tslh Maximum sheet thickness (mild steel): 6.5 mm Maximum sheet thickness (stainless steel): 4 mm Shear angle: 1.5° Throat depth: 350 mm Strokes per minute: 29 Drive power: 7.5 kW Dimensions (L x W x H): approx. 2,670 x 2,000 x 1,600 mm Weight: 4,500 kg Accessories / Special features: • ELGO P 40 NC control as electronic position indicator for the motorized backgauge, length approx. 800 mm, ball screw spindles • 1 piece heavy-duty angle stop with cam lock, 1,000 mm • 2 heavy-duty support arms • Large 350 mm throat depth for cutting longer sheet metal pieces • Central blade gap adjustment • Cutting line illumination • Shallow fixed shear angle of 1.5° • Ball transfers integrated into the table • Top blade with 2 and bottom blade with 4 cutting edges • Plastic pads for hold-downs • Electric foot switch • Rear sheet chute • Oil filling included • Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical components by SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Delivery time: immediately, subject to prior sale Plus, pre-carriage costs China – Germany Exclusive agency! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Kondisi: baru, Tahun pembuatan: 2025, ketebalan pelat baja (maks.): 6 mm, panjang pemotongan (maks.): 3.050 mm, Guillotine Shear: Immediately Available! General Performance Features: - Cutting Length: 3100 mm - Maximum Sheet Thickness: 6 mm (mild steel), 4 mm (stainless steel) - Side Frame Throat Depth: 50 mm - Strokes per Minute: 15 - Cutting Angle: 1° - Number of Hold-Downs: 16 - Hold-Down Pressure: 14 tons - Backgauge: up to 1000 mm - Backgauge Speed: 200 mm/s - Motor Power: 15 kW - Hydraulic Tank Capacity: 200 liters - Support Arms: 2 units - Table Dimensions: 865 mm (height) x 500 mm (width) x 3515 mm (length) Dimensions and Weight: - Length: 4110 mm - Width: 2200 mm - Total Width (with support arm and rear safety guard): 3700 mm - Height: 2100 mm Nsdporx Sydofx Al Tslh - Weight: 7650 kg This guillotine shear is the ideal addition to your workshop, taking efficiency and precision to the next level. Secure this high-quality machine for demanding metalworking projects. Contact us now for further information and a personalized quote!

Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Guillotine Shear SMO-3206-N QC12Y 6x3200 Njdpfxjgih Uts Al Tolh Technical Specifications - Maximum sheet thickness (S235): up to 6.0 mm - Maximum cutting length: 3200 mm - Cutting angle: 1.5° - Strokes per minute: 14 - Maximum backgauge range: 600 mm - Motor power: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Weight: 5,200 kg Features - Rear backgauge with electric motor (on ball screws) - Hydraulic sheet clamping over the full cutting length - Blade gap adjustment - Ball transfers on worktable - Work area lighting - Front support arms - Mobile foot controller E21S Control (Mounted on a movable arm on the left side of the machine) - Backgauge control - Ability to store 40 programs – up to 25 different steps per program - Retraction function - Parameter storage at the push of a button - Parameter memory in case of power failure Hydraulic steel connections Hydraulic connections are made with steel pipes instead of rubber hoses, reducing the risk of future leaks. OCS - Oil Cooling System The oil cooling system guarantees machine parameter stability even during continuous operation. PCS - Pressure Control System The pressure control system ensures reliable blade operation for many years. Professional Support We ensure continuous contact with our customers. That’s why every purchased machine comes with several hours of Otinus Specialist Support. Technical Consultation Our technicians help you select the right machine and appropriate accessories – based on technical drawings of the parts to be produced. Come and test our machine Take part in an exclusive demonstration by a qualified Otinus technician showcasing the machine’s full functionality. You can provide technical drawings and sample material. Included with the machine: 1-day operator training and commissioning - Day 1 (up to 8 hours) – commissioning and control system training Telephone consultation with a specialist - From 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months Free rental of transport rollers and two jacks to facilitate machine positioning at the customer’s site. Rollers and jacks are delivered upon prior request (at least 7 days before machine delivery). Terms of cooperation - 24-month warranty period - Delivery time: approx. 10 - 12 weeks, unless the machine is marked as available from stock. - The machine is brand new - Seller’s warranty and post-warranty service - The customer is responsible for the machine during unloading and on-site transport

Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Guillotine Shear SMO-2506-N QC12Y 6x2500 Technical Specifications - Maximum sheet thickness (S235): up to 6.0 mm - Maximum cutting length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes per minute: 18 - Maximum back gauge distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Weight: 3,800.0 kg Equipment - Motorized back gauge (with ball screw drive) - Hydraulic sheet clamping across the full cutting length - Adjustable blade clearance - Ball transfer tables on the work surface - Work area lighting - Front support arms - Mobile foot pedal E21S Control System (Mounted on a movable arm on the left side of the machine) - Back gauge control - Capacity to store 40 programs – up to 25 different steps per program - Retract function - One-touch parameter storage - Parameter retention in event of power failure Steel hydraulic connectors Hydraulic lines made of steel pipes instead of rubber hoses reduce risk of future leaks. OCS – Oil Cooling System The oil cooling system ensures consistent machine parameters even during extended continuous operation. PCS – Pressure Control System The pressure control system ensures reliable blade operation for many years. Professional Support We maintain continuous contact with our customers. Therefore, with every machine purchase, we offer extensive Otinus Specialist Support hours. Technical Consultation Our technicians assist you in selecting the right machine and accessories, based on your technical drawings of the parts to be manufactured. Come and test our machine Join an exclusive demonstration where a qualified Otinus technician will showcase the full functionality of the machine. You may provide your own technical drawings and sample materials. Scope of delivery includes: 1-day operator training and commissioning Njdpfx Aljgih Upe Tslh - Day 1 (up to 8 hours): Commissioning and training in machine control. Telephone support by a specialist - From 7:30 to 21:00 (Mon–Sat) – an 8-hour package to be used within 12 months. Free rental of roller skates and two lifters for easier placement of the machine at the customer’s site. Rollers and jacks are provided upon prior request (at least 7 days before machine delivery). Terms of cooperation - 24-month warranty period. - Delivery time: approx. 10–12 weeks. This does not apply if the machine is marked as available from stock. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The customer is responsible for the machine during unloading and transportation on their premises.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2001, nomor mesin/kendaraan: 66654, ketebalan lembaran (maks.): 6 mm, panjang kerja: 4.050 mm, RINCIAN TEKNIS Panjang kerja: 4.050 mm Ketebalan pelat maks.: 6 mm RINCIAN MESIN Tegangan: 380 V PERLENGKAPAN Nsdpfoylv Nwsx Al Telh Pembatas belakang yang dapat diatur secara elektrik Sudut pemotongan yang dapat diatur secara elektrik Jarak pisau yang dapat diatur secara elektrik Jarak pisau yang dapat diatur secara elektrik

Kondisi: baru, 1 brand new hydraulic swing-beam guillotine shear Manufacturer: LAMI NOVA / Exclusive distributor! Model: SC 4006 Max. cutting length: 4100 mm Max. sheet thickness (mild steel): 6 mm Max. sheet thickness (stainless steel): 4 mm Cutting angle: 1.5° Throat depth: 350 mm Cutting strokes: 14/min Motor power: 7.5 kW Dimensions (L x W x H): approx. 4630 x 2050 x 1700 mm Weight: 9600 kg Equipment / Special features: Njdsd Ad Dbepfx Al Tolh • NC controller ELGO P 40 for electronic positioning display and motorized backgauge, length approx. 800 mm, with ball screws • 1 heavy-duty squaring arm with tilting stops, 1000 mm • 2 heavy-duty support arms • Large 350 mm throat depth for trimming longer sheet metal plates • Central blade gap adjustment • Cutting line illumination • Shallow fixed cutting angle of 1.5° • Ball transfers integrated in table • Upper blade with 2 and lower blade with 4 cutting edges • Polyurethane pads for hold-downs • Electric foot switch • Rear sheet metal chute • Oil filling • Hydraulic system by BOSCH, DUPLOMATIK, REXROTH, or OILCONTROL • Electrical system by SIEMENS, TELEMECANIQUE • Operating manual • CE-compliant Image: with optional equipment! Lead time: approx. 3 months from receipt of order plus preliminary freight charges China – Germany Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D-44143 Dortmund – Wambel

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, jenis kontrol: Kontrol CNC, produsen pengendali: Durma, model controller: DT-5, laju langkah (min.): 14 rpm, ketebalan lembaran (maks.): 6 mm, penahan belakang: 1.020 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, katup sudut, kendali jauh kaki, penghadang cahaya keselamatan, perlindungan jari, ES3006 from stock - Cutting length: 3100 mm - Capacity: 6 mm steel - Control: DT-5 - CNC backgauge: 1000 mm - Cutting length limitation - Easy operation Nodpfowtl Awjx Al Tjlh - Retract function - Pneumatic sheet support

Tahun pembuatan: 1978, Kondisi: bekas, nomor mesin/kendaraan: 11566, Working width: 4100 mm Sheet thickness: 6 mm Throat depth: 100 mm Nledsy Aurjpfx Al Toh Back gauge: 0 - 1000 mm Drive power: 18.5 kW Required space: 4600 x 2200 x 1950 mm Weight: 11,000 kg

Kondisi: baru, Tahun pembuatan: 2022, VS 3006 Guide Shear with Sheet Lifting Device DURMA IV – Special Offer* – Demonstration Machine Operating hours: 0 h Sheet thickness: 6 mm Cutting length: 3,080 mm Cutting angle: 0.5 – 2° Backgauge: 1,000 mm, CNC-controlled Motor power: 11 kW Length: 4,100 mm Nledpfx Asf U Th Esl Tjh Width: 2,050 / 3,650 mm Height: 1,950 mm Oil filling: 125 l Weight: 7,500 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are ready for demonstration at our Staufenberg location. Further information is available on request. *Plus transportation and installation