Beli mesin frais portal bekas (128)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 42.832 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 760 mm, model controller: FANUC SERIES 18i MB, jarak antara tiang: 2.300 mm, 1 Hedpfx Aoymxi Ajg Rjfd

Kondisi: baik (bekas), Tahun pembuatan: 1997, Produsen: Line Tipe: Seramill 240 Kontrol: NUM 750 Perjalanan sumbu X: 6000 mm Perjalanan sumbu Y: 2500 mm Hsdpfxsyf A H No Ag Rsfd Perjalanan sumbu Z: 950 mm Jarak kolom: 2400 mm Meja: 6000 x 2100 mm Kepala frais otomatis: 2,5° Kecepatan spindle: 3200 rpm Kecepatan pengumpanan: 10 m/menit Berat mesin: sekitar 35 ton

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: fungsi terbatas, CNC gantry milling center (Milling/Turning Center) | Manufacturer: DÖRRIES SCHARMANN | Model: 4FZT | Year of manufacture: 1996 A high-performance gantry milling machine designed for the machining of large workpieces. The primary areas of application are milling and turning of large, complex components. The machine can be inspected under power by appointment. Condition: According to its year of manufacture; partial overhaul is required in some areas. A very high-quality machine, therefore absolutely worthy / strongly recommended for modernization or complete overhaul. TECHNICAL DATA: Main dimensions: - Machine width: 13,230 mm - Machine height above floor: 8,450 mm - Machine length: 31,100 mm Hfedpfx Ageyuptzj Red - Machining length: 11,000 mm - Clearance width: 4,400 mm - Clearance height from table surface to spindle nose of standard milling head: 3,000 mm Table: - Table width: 3,450 mm - Total table length: 13,400 mm - Single table length: 6,200 mm - Total clamping area: 3,450 x 11,000 mm - Clamping area per single table: 3,450 x 5,000 mm - Maximum permissible workpiece weight on total table: 112 t - Maximum permissible workpiece weight on single table: 80 t Crossbeam: - Travel: 2,000 mm Milling and drilling slide: - Drive power for milling and drilling (spindle): 80 kW - Max. spindle speed: 2,500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - CNC control: SINUMERIK 880 - 2 chip conveyors - Documentation - CE mark No guarantee regarding the completeness or accuracy of technical data and equipment details. – Subject to prior sale – A detailed technical data sheet and further equipment information are available on request.

Kondisi: baik (bekas), jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 7.300 mm, jarak gerak sumbu Z: 3.000 mm, panjang total: 30.000 mm, panjang meja: 12.000 mm, lebar meja: 4.730 mm, lebar total: 12.000 mm, tinggi total: 10.475 mm, beban meja: 250.000 kg, berat keseluruhan: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Make: Waldrich-Siegen Model: PF-F-150(1)-530/400 Travel (X-axis): 12,000 mm Travel (Y-axis): 7,300 mm Travel (Z-axis): 3,000 mm Travel (W-axis): 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min T-axis feed rate: 6,000 mm/min Transversely adjustable milling head Vertically adjustable crossbeam Horizontal hydrostatic ram Milling spindle Ø: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-axis travel: 3,000 mm Z-axis feed rate: 2,000 mm/min Küma angular head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2,400 rpm Küma fixed head GB1D – 90 kW – 2,400 rpm Küma angular head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – Coolant through the spindle 20 / 40 bar Machine overhauled in 2004 by Schiess Bed – Table group: - Renewal of slideways - Regrinding of guideways - Renewal of table drive - Direct linear measuring system Hfedpoytrxkofx Ag Red - Hydrostatic guideways Gantry and crossbeam: - Modification of adjustment spindle - Trapezoidal spindle replaced by ball screw - Direct linear measuring system - New drive motors to increase feed speed of milling axes - New milling ram with hydrostatic guides Electrical system: - Complete new control cabinet - Complete new wiring - Siemens Sinumerik 840D control – 6 axes Equipment: - Completely new Raumag-Janich protective covers - Completely new double chip conveyor - Large tooling package - Extensive clamping devices Machine under power in Europe Available immediately Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine housings. Please note: The information on this page has been prepared by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you verify all important details.

Kondisi: baru, Portal machine – the space miracle! CNC gantry milling machine for large travel distances with minimal footprint! ADVANTAGES: • Optimal use of space, completely unobstructed clamping area on the table • Superior chip protection thanks to top-mounted axes • Especially suitable for tall and bulky components FEATURES: - Gantry function on Y-axis (synchronized via ProNC software) - CAN bus system with EC servo motors on all axes - Backlash-free set steel ballscrew drives with steel linear guides - T-slot table for easy clamping of workpieces and accessories - Clamping area from 1100x1000 to 1750x2000 mm - Variable clearance from 340 mm to 590 mm - Spindle motors iSA 500 / 750 / 1500 / 1500L as well as iSA 900 / 1500W / 1500WL / 2200 - Speed: up to 250 mm/sec possible - PILZ safety technology - Effortless operation via height-adjustable CNC panel - Network-capable control PC with WINDOWS - Parallel sliding door - Workpiece clamping via T-slot plate - Variable gantry clearances depending on customer application DESIGN: Gantry: moving, Table: fixed APPLICATIONS: • Machining • Measuring and inspecting Hjdpfjhqhlvox Ag Rofd • Dispensing applications SUITABLE FOR PROCESSING: • Aluminium / Light metals • machinable plastics • Ceramics • Non-ferrous metals (brass, bronze, etc.) • Plastics • Wood Optimal use of space with the smallest possible footprint. Limited space but require maximum travel? We have the answer. Our Overhead machine series offers maximum travels on a compact footprint. All drives are mounted on the upper part of the machine, keeping the machine table completely free for your individual applications. With a wide range of variable features and additional options, the CNC machine can be optimally configured for many industries and applications. In addition to machining, the OverHead Gantry M is also ideal for measuring, inspection, and dispensing tasks. With spindle power up to 2.2 kW, 20,000 rpm, and travel speeds up to 250 mm/sec, it is suitable for woodworking and plastics as well as for light alloys and non-ferrous metals. The unobstructed working area and excellent price/performance ratio offer decisive advantages over comparable products. The OverHead Gantry M is available in five sizes for various travel ranges from M20 to M50. Need the control cabinet on the right side or prefer the control unit on the left? No problem—we are happy to accommodate your requests and naturally take care of maintenance and support for your OverHead Gantry M. Our service technicians are available by phone and can be quickly on-site if required. We also offer our in-house software isy-CAM 2.8 and can provide advice tailored to your specific application. Many options available on request!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 25.000 rpm, model controller: 2000, jumlah sumbu: 3, This 3-axis portal milling machine, MIKROMAT 8V, was manufactured in 2000. It is equipped with an Andronic 2000 control system, automatic tool changer (ATC-16P) with 16 positions, and a high-speed spindle reaching up to 30,000 rpm in short bursts. The machine features a BLUM laser system for precise tool monitoring and measurement, as well as a Knoll scraper-belt conveyor for efficient chip removal. Take advantage of this opportunity to acquire the MIKROMAT 8V portal milling machine. Contact us for further information about this unit. Additional Equipment • Scraper-belt conveyor with discharge height of 1200 mm • Temperature-stabilized control cabinet with high-performance cooling unit Machine Advantages Technical Machine Advantages • Automatic tool changer type: ATC-16P • HSK 100 spindle taper • Blum laser system for tool monitoring and measurement • Andronic 2000 control system • High-speed spindle with a maximum rotational speed of 25,000 rpm Additional Information Logging of measurement results via the touch screen display Andronic 2000 control system with automatic tool changer type: ATC-16P and working area safeguarding Includes 1 high-speed spindle Complete with torque support Spindle speed for automatic tool changer: nmax for dry run Continuous operation: 25,000 rpm At 10% duty cycle: 30,000 rpm Reference time: 1 hour Reduction ratio: 1:7.5 Machine spindle holder: DIN 69 893 HSK 100, 1 piece Hedpox D Dymofx Ag Refd Scraper-belt conveyor for short-chipping materials Discharge height: 1,200 mm Brand: Knoll Measurement result logging via touch screen display, 1 piece BLUM laser system Tool monitoring and measurement, 1 piece Temperature stabilization Control cabinet with high-performance cooling unit Note: The rotary table (work spindle) visible in the photos has been decommissioned and is not available as a rotary table.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 700 mm, kecepatan spindel (maks.): 10.000 rpm, beban meja: 4.000 kg, berat keseluruhan: 13.000 kg, produsen pengendali: SIEMENS, model controller: 840D, jumlah sumbu: 3, Nicolas Correa Euro 2000 3-sumbu ini diproduksi pada tahun 1997. Mesin ini dilengkapi dengan kontrol Siemens 840 D dan elektrospindle Ganfior dengan kecepatan 10.000 rpm. Area kerja adalah 2000 × 1250 × 700 mm dengan dudukan spindle taper SK40. Kapasitas beban meja maksimum adalah 4.000 kg dan berat mesin 13.000 kg. Jika Anda mencari mesin frais berkualitas tinggi, pertimbangkan Nicolas Correa Euro 2000 yang kami tawarkan untuk dijual. Spesifikasi Teknis Hsdpfxsyctpij Ag Rsfd Ukuran Taper: SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jarak pergerakan sumbu X: 900 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 200 mm, kecepatan spindel (maks.): 24.000 rpm, berat keseluruhan: 545 kg, daya motor spindle: 4.000 W, jumlah sumbu: 3, This 3-axis T-Rex Servo-0609 was manufactured in 2023. It is a CNC gantry milling machine featuring KinetiC-NC control and PC software. The traversing distances are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It is equipped with a Hiteco 4.0 kW ATC spindle, air-cooled, with a speed of 24,000 rpm and an automatic 4-position tool changer. Take advantage of the opportunity to purchase this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Additional Equipment • Accessories: Electronic handwheel, gigabit network switch (5 ports) Machine Advantages Technical Machine Advantages • Drive: Servo motors with automatic lubrication • Clamping system: Vacuum table with T-slot rails • Tool changer: 4-position changer (ISO30), automatic (ATC) • Tool holders: 6× SK30/ER32 with nuts and pull studs • Single collet ER32 (3.175 mm, 0.0006" runout accuracy) • Vacuum generation: Side channel blower 2.2 kW (520 mbar, 155 m³/h) • Transport: Carton dimensions: 175 × 180 × 200 cm Hfodpfox H A Nnjx Ag Red Additional Information Machine still under power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, tinggi total: 4.900 mm, berat keseluruhan: 51.000 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 840D, This 4-axis gantry milling machine MIKROMAT 20V was manufactured in 1998. Ideal for precision milling, it features a robust construction and reliable performance. Take the opportunity to acquire this MIKROMAT 20V gantry milling machine. Contact us for further information. Additional Equipment • Automatic Tool Changer: Included / Number of magazine positions: 90 / Max. tool diameter: 125 mm (300 mm with free adjacent positions) / Max. tool length: 450 mm / Max. tool weight: 30 kg / Tool change time: approx. 5 sec. • Compressed air connection / Air supply: 6 bar - 5 m³/h / Rated voltage: 3 AC 400 V / Control voltage: DC 24 V / Connected load - basic machine: 65 kW • Coolant supply and filtration system: Included / Tank capacity: 1500 l / External cooling pump: Q = 20/40/60 l/min, switchable / Internal cooling pump: Q = 35 l/min at 50 bar Working area protection with lighting: Included / Chip conveyor system: included, with scraper belt, discharge height 1000 mm Hsdpfx Agsx D Hcwe Rsfd Machine Advantages Technical Machine Advantages • Travel (X-table): 5200 mm / (Y-slide): 3400 mm / (Z-spindle): 1250 mm • Maximum feed force (X, Y, Z): 15 kN • Clamping surface: 2000 x 5000 mm / Maximum table load: 100 kN / Width / spacing of T-slots: 22 / 160 mm / Clearance width: 2400 mm / Distance between spindle nose and table surface: 500 to 1750 mm • Spindle speeds: 10 to 5000 rpm / Max. spindle motor power: 37/46 kW / Max. spindle torque: 1000/1250 Nm / Spindle head for tool shank: SK 50 • Control type: Microprocessor control Siemens Sinumerik 840D / Display: Color screen 10.4 inch TFT display / Number of axes: 3 (X, Y, Z) • Control: Integrated with a variety of functionalities such as spindle orientation, interpolation, and electronic handwheel • Programming and data transfer: Comprehensive programming and data transfer capabilities via the universal interface V24/RS-232 • Accessories: Extensive accessories and additional equipment features focusing on improved efficiency and safety Dimensions Machine Depth: 10,500 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 29.081 h, Fungsionalitas: berfungsi sepenuhnya, FPT Industrie S.p.A. – Travelling Column/Portal Milling Machine Model: DINOSPIN Year of Manufacture: 2019 Serial Number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine Weight: 44,280 kg Control System: Heidenhain TNC640 (15") RAM: 4 GB Hard Disk: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block Processing Time: 0.5 ms Handwheel: Heidenhain HR510 (Remote handwheel) Universal Milling Head (5-axis machining, simultaneous movement of 2 axes) Max. Spindle Speed: 18,000 rpm Swivel Range C: ±270° Swivel Range A: ±185° Max. Rotation Speed A/C: 30 rpm Working Torque A/C: 450 Nm Axis Clamping Torque: 1,400 Nm Positioning Uncertainty: 8 arcsec / Scatter: 4 arcsec (VDI/DGQ 3441) Spindle Power (S1/S6): 22/33 kW Hsdpfxsyrndmo Ag Refd Spindle Torque (S1/S6): 84/128 Nm Continuous Operation Constant Power: 2,500–18,000 rpm Continuous Operation Constant Torque: 10–2,500 rpm Tool Holder: HSK-A63 DIN 69893 Rigid Tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool Changer (overlapped-wheel, with changer arm) Magazine Capacity: 80 Max. Tool Ø: 75 mm Max. Tool Ø with free adjacent pocket: 125 mm Max. Tool Weight: 10 kg Max. Tool Length: 600 mm (for 40 tools) Max. Tool Length: 250 mm (for 40 tools) Tool Type: HSK-A63 DIN 69893 Measuring Systems Laser Tool Setter: Tool length/radius + tool breakage detection (software included) Probe for workpiece measurement/alignment: Wireless transmission, cycles included in CNC Monitoring Sensor for vibration/collision detection: Response time approx. 1 ms Coolant System external/internal (LEU/LEIUHP) Tank Volume: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External Cooling: max. 30 l/min, max. 10 bar ICS (Internal Coolant Supply): max. 30 l/min, max. 70 bar Additional Options/Features External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 2.000 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 18.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 30 m/menit, torsi: 38 Nm, berat keseluruhan: 65.000 kg, First commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ±100° C-axis: ±360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with T-slots 18H12 / 250 mm 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power requirement: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided opening doors - 10-position tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Hfsdsyrdc Ejpfx Ag Red Condition of the machine Fully functional, in very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 68.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.200 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 15.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 30 m/menit, torsi: 167 Nm, berat keseluruhan: 35.000 kg, en-01 Hodpfx Ageyrc Akj Refd

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 12.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5645, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 4.000 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan pemakanan sumbu X: 25.000 m/menit, laju pemakanan gandar Y: 25.000 m/menit, laju pemakanan sumbu Z: 25.000 m/menit, panjang total: 6.550 mm, panjang meja: 2.500 mm, lebar meja: 2.500 mm, lebar total: 15.900 mm, kecepatan spindel (maks.): 4.000 rpm, tinggi total: 11.500 mm, berat keseluruhan: 57.000 kg, jangkauan kerja: 2.500 mm, daya motor spindle penggiling: 46.000 W, Dear Sir or Madam, Hsdpfx Agottri Ts Rjfd We hereby offer our portal bed milling machine for sale. The machine was installed in winter 2019/2020 and has logged 12,000 operating hours. Price information is available upon request. The machine is currently still in operation. The stated price pertains exclusively to the machine itself. Disassembly, transport, and installation are the responsibility of the buyer. We look forward to receiving serious inquiries. Thank you in advance.

Kondisi: baik (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.150 mm, Kontrol: Siemens 840 D Powerline Pemegang alat: HSK-A63 Kecepatan maksimum: 16.000 rpm Perjalanan X: 3000 mm Perjalanan Y: 2500 mm Perjalanan Z: 1150 mm Sumbu A: +/- 100 mm Sumbu C: +/- 181,5 mm Hfodoytfguspfx Ag Rod Ukuran meja: 3000 mm x 2500 mm Opsi: Udara tiup luar Kinematika: Kepala garpu

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Kami menjual Datron M8 tahun 2011 kami, mesin dalam kondisi hidup dan siap langsung digunakan! Termasuk alat, pelat penjepit vakum, penjepit pneumatik, dan perangkat lunak pemrograman! Magasin alat 10 posisi (termasuk banyak alat dan dudukan) Spindel milling HSK25, 50.000 rpm Termasuk perangkat lunak pemrograman Primcam 2x penjepit pneumatik Pelat vakum dengan pompa vakum Perlengkapan penjepit horizontal Pendinginan dengan alkohol atau udara Hsdpeyti I Ajfx Ag Rjfd

Kondisi: bekas, Travel in X-axis: 6500/13,150 mm Travel in Y-axis: 4000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 2250 mm Control system: Sinumerik 840 D Clamping surface of table: 5500/12,150 x 3000 mm Passage between columns: 3500 mm Hodpfewa Dx Rjx Ag Rjfd Max. distance between work table and spindle nose: 3000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Spindle speeds – stepless: 6.3 - 4000 rpm Milling spindle motor: 63 kW Torque at the spindle: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Feed rate X/Y/Z = 24,000 mm/min Total power requirement: 120 kVA Machine weight approx. 245 t Required space approx. 29 x 7.7 x 8.1 m The machine is in almost as-new condition and was completely overhauled and modernized in 2020 for €1.6 million! Equipment/Accessories: - Automatic tool magazine for 153 tool positions - Automatic milling head magazine for 6 milling heads - Machining modules/milling heads:  Machining module – straight – straight long –  Machining module – angle standard – 4000 rpm, 144 x 2.5b0, ISO 50  Machining module – narrow extended angle – 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5b0, ISO 50  Machining module – universal index – 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5b0, B-axis +/- 44 x 2.5b0, ISO 50 - Coolant system - Chip conveyor - Technical documentation

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, MILLING MACHINE BRIDGE FPT INDUSTRIE SPESIFIKASI TEKNIS Merk: Fpt Industrie Hjdeytpfnspfx Ag Rjfd Model: Dinox 350 (IAT) Tahun: 2023 PickUp 2 posisi Kepala otomatis presisi tinggi (2 badan) Penukar alat CNC: Heidenhain HARGA DAN INFORMASI LEBIH LANJUT HUBUNGI KAMI (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, FRAIS, BUBUT, GERINDA, BOR, PRESS, LASER, GUNTING, BENDING)

Kondisi: baik (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Millstep CNC milling machine PA8070V3, year 2021 and PAX8050V2 – year 2015 – 6 units available in total CNC Gantry Milling Machine MillStep PA8070V3 – fully equipped For sale are three CNC gantry-type milling machines MillStep PA8070V3 (special size) in excellent condition. These machines are ideal for precision machining of aluminium, plastics, wood, and non-ferrous metals, as well as for prototyping and small batch production. Technical Specifications • Travel Range: X 800 mm / Y 680 mm / Z approx. 200–240 mm • Working Area: 800 × 625 mm • Repeatability: ±0.01 mm • Feed rate: up to 9 m/min • Linear guides: HIWIN profile rails • Ball screws on all axes Equipment • HF spindle 2.2 kW (up to 24,000 rpm) with ER25 collets • Hitachi frequency inverter WJ200 • 3-axis controller with cncGRAF Pro • Vacuum tables 800 × 500 mm and 600 × 500 mm • Vacuum pump 1.5 kW • Minimum quantity lubrication (MQL) • Tool length sensor Hfodpjyrx Shsfx Ag Rjd • Robust steel base frame with chip drawers • Safety enclosure with protective doors The machines are fully functional, well-maintained, and can be inspected and tested by appointment. Location: 09474 Crottendorf Price: EUR 5,900 net per unit (PA8070V3, year 2021) and EUR 3,900 net per unit (PAX8050V2 – year 2015) – 3 of each available – on-site inspection possible (machines still in operation) Shipping: Available by arrangement

Kondisi: bekas, Tahun pembuatan: 2010, - Model: MECAPRO 3015 - Tahun: 2010 Hjdpfxeypi Hqj Ag Rjfd - Ukuran meja: 3050 x 1530 mm - Stasiun alat: 6 unit - Spindel: 4 kW - Vakum: 4 pompa Siemens 2,2 kW - Kontroler: Mecanumeric CN7000ISO

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 12 m/menit, panjang total: 11.000 mm, panjang meja: 4.500 mm, lebar meja: 1.250 mm, lebar total: 4.645 mm, kecepatan spindel (maks.): 3.000 rpm, tinggi total: 4.170 mm, berat benda kerja (maks.): 10.000 kg, kecepatan rotasi (maks.): 5.000 rpm, berat keseluruhan: 30.500 kg, The Nicolás Correa FP40-40S gantry milling machine, refurbished model, is a high-precision machine suitable for demanding industrial applications. With a large table surface of 4,500 x 1,250 mm and a total of 8 T-slots, it enables efficient machining of oversized workpieces. The X, Y, and Z axis travels are 4,000 mm, 2,500 mm, and 1,000 mm respectively. Equipped with an automatic UAG milling head and ISO 50 taper (DIN69871), this milling machine provides flexibility and ease of use for complex tasks. The machine features a speed range up to 5,000 rpm and rapid traverse of 15,000 mm/min, significantly enhancing productivity. The head power is 30 kW, ensuring robust and consistent performance during long operations. The Nicolás Correa FP40-40S can support a maximum table load of 10,000 kg, making it ideal for large-scale projects. This well-maintained and refurbished equipment is available for those seeking Correa’s reliability and precision at an affordable price. Hedpfsul S Syox Ag Rjfd ACCESSORIES: - Portable Handwheel: Heidenhain HR-410 - Chip Conveyor: 2 - ATC Tool Changer: 30 - Renishaw Tool Measuring Probe: Yes - External Coolant: Yes - Through-Spindle Coolant: Yes - CE Safety Enclosure: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 650 mm, panjang total: 6.500 mm, panjang meja: 2.000 mm, lebar meja: 1.000 mm, lebar total: 3.600 mm, kecepatan spindel (maks.): 12.000 rpm, tinggi total: 4.000 mm, berat keseluruhan: 14.000 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The NICOLAS CORREA EURO 2000 milling machine is a pre-owned unit delivering reliable performance for various industrial applications. Equipped with a HEIDENHAIN TNC 530 CNC control, this model ensures precise and efficient operation. The worktable measures 2000 x 1000 mm, offering a spacious and versatile working area. The machine features travels of 2000 mm on the X-axis, 1250 mm on the Y-axis, and 650 mm on the Z-axis, providing ample capacity for complex projects. The distance between columns is 1250 mm, contributing to a robust and stable structure. The HSK 63 spindle head with electrospindle achieves speeds up to 12,000 rpm, allowing for high-precision machining across a range of materials. Hfedpfx Ageul Txzo Red Additionally, the milling machine is fitted with a full enclosure, ensuring operator safety while minimizing noise and dust during operation. This used but well-maintained machine is an excellent choice for companies seeking to enhance their production capabilities without compromising on quality. The milling machine was retrofitted in 2024. CNC: TNC 530 HEIDENHAIN Distance between columns: 1250 mm Spindle head: HSK 63 ELECTROSPINDLE 12,000 rpm Enclosure: FULL

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 C-axis ±360° Milling head – swiveling ° Milling head rotatable ±360° Table size – longitudinal 2500 mm Table size – cross 3500 mm Table load 6 t/m² Coolant system IKZ 70 bar Feed rate 60 m/min Spindle speeds 24,000 rpm Tool holder HSK-A63 Milling spindle motor S6 (40%/2 min) 41 kW Spindle torque S6 (40%/2 min) 49 Nm Milling spindle motor S1 (100%/2 min) 34 kW Spindle torque S1 (100%/2 min) 39 kW Tool changer 60 positions Machine weight approx. 74 t Required space approx. 4 x 7.5 x 5.4 m This thermosymmetric, ergonomic, universal ZIMMERMANN FZU32 gantry milling machine is in like-new condition and immediately available. Hjdjvwgtyepfx Ag Refd DESCRIPTION: The FZU32 is a remarkably compact 5-axis gantry milling machine for machining aluminium, composite materials, plastics, Ureol, and steel. The newly developed, centrally guided, exceptionally rigid gantry allows us to meet the increasing demands in model making, tool, and mould construction. This thermosymmetric design makes the FZU32 less susceptible to adverse environmental conditions.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, X-axis travel 14,000 mm y-axis travel 5,000 mm z-axis travel 1,500 mm w-axis 3,000 mm Distance between columns 4,000 mm Portal column: Distance table to spindle nose 4,500 mm Workpiece weight 100 t Table dimensions - longitudinal 9,000 mm Table dimensions - transverse 3,000 mm Spindle taper ISO SK 50 Spindle speeds 2-2,500 rpm Hsdpfx Ajvwgm Hsg Rofd Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1-10,000 mm/min Feed range y-axis 1-10,000 mm/min Feed range z-axis 1-10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>>retrofit 2011

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Hjdpfx Asvwgmmeg Rsfd Workpiece weight capacity: 10,000 kg Spindle speeds: 5-6,000 rpm Gear stages: 2 Drive power - milling spindle: 45 kW Distance spindle to clamping spindle: 3500 mm Spindle torque: 1,250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Max. tool weight: 50 kg Max. tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angle milling head yes Automatic tool clamping yes Ball screw drives yes Guideway covers yes Coolant system yes High pressure cooling system (internal coolant supply) yes Fully enclosed work area yes Portal machining center with tool changing system and second table plate.

Kondisi: baik (bekas), Mesin dalam kondisi kerja yang baik. Suku cadang yang ditunjukkan dengan tangan tidak termasuk. Hfedpeylxg Eofx Ag Rjd