Beli Mesin bubut poros penggerak/pengarah dengan diameter pembubutan di atas ranjang 300–399 mm bekas (193)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp Rsdpevrckqsfx Abusbt For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: Rsdpfx Aewvuf Tsbusbt >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch Redsvambcopfx Abuobt >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Rbsdpfjvrdlcox Abuot Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal Rbjdpfx Abowrm Dteuot >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system Rbjdpewthbiofx Abuet About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Rsdpswag Stefx Abujbt Accessories and Equipment: >> 3-axis digital position display >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: baru, Tahun pembuatan: 2025, CONDOR VC plus The new benchmark in conventional precision lathes. A high-quality, high-performance, and energy-efficient precision lathe designed for high-productivity applications in production and toolmaking, as well as for training and education purposes. Superior quality, energy efficiency, precision, and universal suitability for use in production, training, and further education. Key features include: - Future-oriented technology - Exceptional accuracy - Long service life - Operator-friendly ergonomics - Minimal space requirements - Comprehensive range of accessories The consistent and innovative advancement of the proven Condor series represents an economical and intelligent solution for your daily machining needs. Technical Specifications: WORKING AREA Centre height 180 mm Swing over bed 360 mm Swing over cross slide 190 mm Distance between centres 800 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 6 Spindle bore 57 mm Spindle diameter at front bearing 90 mm MAIN DRIVE Drive capacity at 60%/100% duty cycle – / 10.5 kW Speed range 25 – 4,000 rpm Number of speeds Infinitely variable FEED RANGE Number Infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill stroke 110 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 Equipped with WEILER WTS 15 VC plus touchscreen display - Large, clearly arranged 15" touchscreen, rotatable and pivotable, 1366 x 768 resolution - Switching between operating screens via swipe gesture - Operating functions accessible through App Manager - Operating panels can be freely configured, placed, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-assisted maintenance support - Contextual help menu (instead of WEILER VC plus display) Rbedpfx Abeqwipnjust The machine is available immediately and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For further information regarding equipment options, please contact us.

Kondisi: baik (bekas), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Centre distance: 650 mm Rbedpfx Abjuqkf Nsuet Spindle bore: 42 mm Infinitely variable speed from 15 to 3250 rpm 1 x SCHUNK wedge bar power chuck Ø160 mm 1 x MULTIFIX tool holder size B with 4 inserts Machine light, chuck guard with electrical interlock, machine feet 1 x revolving centre, 1 x revolving centre with pressure gauge 1 x drill chuck with taper shank The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing is possible by appointment.

Kondisi: baru, Praktikant VC plus The new dimension in the field of conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. Its strengths include: forward-thinking technology maximum precision long service life operator-friendly ergonomics minimal space requirements and comprehensive accessories The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORKING AREA Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Morse taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large and clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Operation screens switched via swipe gestures - Operation functions accessible via app manager - Control fields can be freely configured, positioned, and scaled - Drawings/sketches in PDF format can be imported via USB and individually zoomed - Video-assisted machine maintenance - Context help menu (instead of the WEILER VC plus screen display) - Coolant system, 18 liters including coolant pump Rbedpfehw N Ntsx Abuot The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For equipment details, please contact us.

Kondisi: baru, Tahun pembuatan: 2025, Intern GSD One of the best-selling and most popular conventional precision lathes Distinguished by: sophisticated engineering highest precision long service life proven ergonomic design minimal footprint and extensive accessories. Proven over decades in single-part and small series production, in both craft and industrial settings, for training and professional development, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed rod protection Main spindle brake Rsdpfx Ajwhzcpsbuobt Toolroom accuracy according to DIN 8605 Two-speed brake motor Headstock gear transmission 16 fixed spindle speed levels Digital position display (optional) LED machine lamp TECHNICAL DATA: WORKING AREA Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Centre distance: 650 mm LATHE SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% DC: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speed steps: 16 FEED RANGE Number: 24 Longitudinal: 0.02 – 0.63 mm/rev Cross: 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads: 0.25 – 8* mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Taper according to DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 * Inch and metric pitches 0.45; 0.75; 4.5 and 5.5 mm only possible with additional change gears. The machine is located in our showroom in 71334 Waiblingen-Beinstein and is immediately available. For equipment details, please contact us.

Kondisi: bekas, Tahun pembuatan: 2000, gebrauchte-condor-ac-teilueberholt Rbjdpfjx E Um Nox Abujt

Kondisi: bekas, Tahun pembuatan: 2003, nomor mesin/kendaraan: 1527, mesin bubut poros utama dan poros penuntun bekas COLCHESTER Triumph VS 2500 Rbjdpfex Hrumox Abujt Tinggi senter: 195mm Panjang benda kerja antara senter: 650mm Lubang spindle: 54mm Kecepatan variabel tanpa tingkat dari 14-2500 rpm Pinol kepala lepas MK5, perangkat pendingin, perangkat pemotong ulir cepat Display digital FAGOR NUP 300 TS-RS 1 x chuck tiga rahang RÖHM, pembatas drum 5 posisi, pembatas spindle berlubang Lampu mesin, 1 x kepala revolver PARAT 4 posisi, 4 x dudukan alat ganti PARAT center yang ikut berputar dan chuck bor quick-change Mesin tersedia di lokasi kami di 71334 Waiblingen-Beinstein dan siap langsung digunakan. Peninjauan mesin dapat dilakukan dengan perjanjian.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 36 mm, tinggi pusat: 155 mm, panjang pembubutan: 800 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 25 rpm, Used centre lathe Weiler Condor, No. 7939 Centre height: 155 mm Centre distance: 800 mm Spindle speeds: 12–2800 rpm Spindle bore: 36 mm Accessories: - 1x 3-jaw chuck RÖHM Ø 160 mm - Multifix base body size B with 2 tool holders - Keyless drill chuck Rbodpfx Abjv R Tdxoust - Live centre and coolant system The machine is located in our warehouse in 71334 Waiblingen-Beinstein and is immediately available.

Kondisi: bekas, L + Z lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine no. 8169 Year of manufacture: 2002 Centre distance 1000 mm Swing over bed 320 mm Centre height over bed 160 mm Swing over cross slide 190 mm Centre height over cross slide 95 mm Spindle bore 32 mm Spindle speed (right-hand rotation): 85 - 2000 rpm, 12 steps Spindle speed (left-hand rotation): 130 - 1300 rpm, 6 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55027 size 5 Tailstock taper: MT 3 Drive power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed control with 12 gearbox steps in machining direction - Spindle speed control with 6 gearbox steps against machining direction - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-position universal tool post - Coolant tank with pump integrated in the machine base - Spindle brake actuated via direction lever Rsdpfx Abovt U Tmouebt - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-action drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Required space (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LZ280/3, diameter putar di atas sled silang: 190 mm, lubang spindel: 43 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 330 mm, tinggi pusat: 165 mm, panjang pembubutan: 670 mm, gores kuas bulu: 90 mm, diameter quill: 45 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful geared-head lathe with a continuously variable spindle speed range from 30 to 4,000 rpm. The standard paint finish includes RAL 7035 (light grey) for the enclosure and RAL 7016 (anthracite grey) for the base, splash guard, and chuck guard. Features & Accessories: ✅ 3-axis position display with 6'' color screen ✅ Multifix A quick-change tool post including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine lamp & K32 collet board ✅ Electromechanical end-stop system for threading/feeds ✅ Tool cabinet with telescopic pull-outs including operating tools Additional equipment package (optional): ➕ 3-jaw chuck Ø 160 mm (up to 4,600 rpm) Rbedpev Dan Defx Abust ➕ Keyless drill chuck (3–16 mm, B16/MK3) ➕ Live center MK3 & boring bar holder ➕ 4 additional turning tool holders & 1 boring bar holder 📦 Delivery: ✔️ Disposable packaging & secure transport incl. insurance Perfect for precise and demanding turning applications in industry and workshops! 🚀

Kondisi: siap digunakan (bekas), Colchester Triumph 2500 Lathe Turning diameter (over bed): 400 mm Rjdpfoxfrgdjx Abujbt Turning diameter (over cross slide): 246 mm Distance between centers: 1270 mm Center height: 195 mm Swing diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2500 rpm Spindle speed ranges (infinitely variable): Low: 14 rpm - 300 rpm Medium: 36 rpm - 830 rpm High: 109 rpm - 2500 rpm Overall dimensions: 2600 mm x 1300 mm x 1800 mm (L x W x H) Accessories: - 5 Multifix tool holders - Steady rest - Center, live centers - Drill chuck - Jaws - Cabinet - Coolant pump You are welcome to schedule an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (subject to a valid VAT identification number). Sale subject to prior sale. Visit our shop and see our other offers as well. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description may occur and are subject to change.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LVM50GIRJA/02115, SPESIFIKASI MESIN Tinggi pusat: 170 mm Putaran di atas tempat tidur: 350 mm Putaran di atas eretan silang: 196 mm Putaran pada celah: 535 mm Lebar depan pelat muka: 165 mm Panjang tempat tidur antara pusat: 1250 mm Kecepatan spindle (variabel tak terhingga): 15-3250 rpm Mounting hidung spindle (Camlock): D1-4 Lubang spindle: 42 mm Motor spindle: 7,5 kW Lebar over bedways: 318 mm Perjalanan eretan silang: 250 mm Perjalanan eretan atas: 100 mm Perjalanan laras tailstock: 145 mm Taper dalam laras tailstock: No. 4MT Mesin dengan eksekusi Imperial MESIN DILENGKAPI DENGAN Sistem DRO 2 sumbu Newall DP700 Chuck 3 jaw Rjdsycg Thspfx Abuebt Quick change toolpost dan 3 toolholder Bedstop Penerangan Pelindung chuck Sistem pendingin Splashguard belakang

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1966, Segera tersedia dari lokasi: Rbjdpfx Absyayfxsuot Mesin Bubut L & Z Weiler Tahun pembuatan sekitar 1966 Tinggi pusat 140 mm Diameter putar 280 mm Di atas dudukan 180 mm Panjang pembubutan 800 mm Lubang spindle 24 mm Kecepatan spindle hingga 1600 rpm Daya penggerak 2 kW Diameter cekam 140 mm Holder Multifix dengan sisipan Berat 1 ton Harga EUR 1.500.— belum termasuk PPN dari lokasi

Kondisi: baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 1101188, GDW LZ 250 Mesin Bubut Lead dan Draw Spindle Tahun pembuatan: 2000 Tinggi pusat: 125 mm Jarak pusat: 500 mm Rbsdpfx Abex Slhdouet Lubang spindle: 38 mm Pemasangan spindle: DIN 55027/4 Pemasangan tailstock: MK 3 Rentang putaran: 60 - 3.000 rpm, tanpa langkah Berat: sekitar 600 kg Dimensi: sekitar 1.300 x 700 x 1.400 mm Dengan perangkat collet chuck Dengan display digital Iskra

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Colchester Student 2500 Digital 3-sumbu Perangkat penjepit collet Rodpfow R S Awjx Abuebt Berbagai aksesori

Kondisi: baru, Centre length ----- 1000 mm Centre height ----- 160 mm Swing diameter ----- 320 mm Spindle bore ----- 38 mm Bed width ----- 180 mm Spindle speed ----- 65-1810 rpm Motor ----- 1.5 kW Weight ----- 560 kg INCLUDES * 3-axis digital readout, brand SINO * Multifix TOOE5 quick-change tool post with 4 tool holders * 3-jaw chuck 160 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rests * Foot brake (CE) Rbodpfx Ajrpn Uijbust * Electric brake (CE)

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Manufacturer: 600 Lathes Model: Harrisson V350 Center height: 170 mm Turning diameter over bed: 350 mm Turning diameter over cross slide: 196 mm Turning diameter in gap: 535 mm Width in front of faceplate: 165 mm Distance between centers: 650 mm Spindle speeds (infinitely variable via potentiometer in 3 speed ranges with digital display): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Spindle nose (Camlock): D1-4 Spindle bore: 54 mm Spindle motor: 7.5 kW Saddle guide width: 318 mm Cross slide travel: 250 mm Top slide travel: 140 mm Tailstock quill travel: 140 mm Quill taper: MT4 Quill diameter: 63 mm Machine supplied in metric version Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral pitch: 8 - 56 (20) Drive power: 7.5 kW Equipment: 3-axis digital readout Röhm 3-jaw chuck, dia. 200 mm 4-jaw chuck, dia. 160 mm Collet chuck Steady rest 4-position quick-change tool post Live center Chuck guard Additional chip guard on carriage Coolant system Rear splash guard Machine documentation including circuit diagram Dimensions: Floor to spindle center: 1050 mm Overall length: 1900 mm Overall width: 1100 mm Overall height: 1300 mm Weight: 1350 kg Rbsdpfx Asxcuulsbujt The machine can be demonstrated under power on site. All information without guarantee. Subject to errors and prior sale.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross-slide: Ø 180 mm Centre height over cross-slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment & accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick clamping unit and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 Rbedpfovadqzex Abust - Multifix quick-change toolpost, size B - LED work lamp - Bed stop - Automatic longitudinal and facing feeds - Electro-mechanical spindle brake, switchable - 2x Emergency stop - Electronic chuck key interlock (via sleeve with switch) - Coolant tank with pump integrated in machine base - Hinged chuck guard - Splash guard panel - Circuit diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very user-friendly and robust. The machine can be demonstrated under power on site. All information is without guarantee. Subject to prior sale.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Translation: Centre distance: 750 mm Turning diameter: 310 mm Turning diameter over cross slide: 175 mm Spindle bore: 32.0 mm Tailstock quill taper: MT 3 Spindle speed: 85 - 2200 rpm Bed width: 200 mm Spindle mount: DIN 55027 Size 5 Total power requirement: 2.2 kW Machine weight: approx. 710 kg Dimensions (LxWxH): 1884 x 717 x 1262 mm Original price: approx. €20,000 From a university of applied sciences (!!) - In tested condition - machine videos available - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Equipment: - Robust conventional geared-head lathe - 3-jaw chuck, Ø 160 mm, with spare jaws - "NEWALL" digital readout, front left - MULTIFIX tool post with 4 holders - Fixed steady rest - Travelling steady rest - Sliding tailstock - Foot/spindle brake - Machine anti-vibration mounts - Operating manual (PDF/Dutch) * All technical data: - Swing over bed: 310 mm - Centre distance: 750 mm - Swing over cross slide: 175 mm - Spindle bore: 32 mm - Bed width: 200 mm - Spindle mount: DIN 55027 Size 5 - Spindle taper: 4.5 M - Spindle speed: 85 - 2000 rpm - Metric thread range: 0.1 - 28 mm - Module thread range: 0.1 - 1.75 - DP thread range: 4 - 70 - Cross slide travel: 150 mm - Top slide travel: 95 mm - Tailstock quill diameter: 40 mm - Tailstock taper: MT 3 Rjdpfoxab Tpex Abuobt - Tailstock quill travel: 100 mm - Motor power: 2.2 kW - Weight: 770 kg