Beli Mesin bubut poros penggerak/pengarah dengan diameter pembubutan di atas ranjang 300–399 mm bekas (229)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Display K&C, Fully Refurbished with Inspection Report for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: 0.026 to 0.888 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Switchable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Equipment and Accessories: >> K&C 3-Axis Digital Readout, new, with 12-month manufacturer’s warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> 200 mm wedge bar 3-jaw chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: Lredpfsvrcqdjx Ab Nju Offered is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. Guides have been newly ground or hand-scraped. Acceptance with inspection protocol. 2K white gloss paintwork. Accessories (Multifix and chuck) are new. Safety features: The machine has a brake motor, electronic spindle protection, and two emergency stop switches—an absolutely as-new condition lathe. Even at high speeds, the Weiler runs extremely smoothly. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4/0009/07423DD, Maschinenspezifikation Spitzenweite: 1000 mm Spitzenhöhe: 165 mm Umlaufdurchmesser Umlauf über Bett: 335 mm Umlauf über Planschlitten: 209 mm Spindel Durchgangsbohrung: 40 mm Ø Spindelkopf: D1-4 Camlock Morsekegel in Spindelnase: Nr. 3 Bettbreite: 231 mm Verfahrwege Lsdsv Imi Aepfx Ab Njru Gesamter Verfahrweg Planschlitten: 209 mm Gesamter Verfahrweg Oberschlitten: 95 mm Gesamter Verfahrweg Reitstockpinole: 146 mm Drehzahlen Spindeldrehzahlen (16 Stufen): 22–1800 U/min Spindelmotor: 2,25 kW Gewinde Whitworth-Gewinde (45): 2–72 Gg/Zoll Diametralgewinde (21): 8–44 Metrische Steigungen (39): 0,2–14,0 mm Modulgewinde (18): 0,3–3,5 Vorschübe Längsvorschub: 0,001–0,0740 Zoll/Spindeldrehung Planvorschub: 0,0005–0,020 Zoll/Spindeldrehung Reitstock Gesamtgewicht ca.: 800 kg Maschine in metrischer Ausführung Ausstattung der Maschine - Goodwin 2-Achsen-Digitalanzeige (DRO) - 3- und 4-Backenfutter - Planscheibe - Schnellwechsel-Stahlhalter mit 3 Haltern - Kombinierte metrische/imperiale Nonius-Skalen am Oberschlitten & Planschlitten - Kreuzsupportskala (Apron dial) - Bettanschlag - Maschinenbeleuchtung - Kühlmitteleinrichtung - Futterabdeckung - Rückseitiger Späneschutz

Kondisi: bekas, Tahun pembuatan: 1990, diameter putar di atas sled silang: 210 mm, lubang spindel: 31 mm, diameter pembubutan: 320 mm, tinggi pusat: 165 mm, Machine can be tested under power and is fully operational. Includes accessories. Lsdpswpkd Sjfx Ab Njru Collet equipment is included.

Kondisi: baru, Centre length ----- 1000 mm Centre height ----- 160 mm Swing diameter ----- 320 mm Spindle bore ----- 38 mm Bed width ----- 180 mm Spindle speed ----- 65-1810 rpm Motor ----- 1.5 kW Weight ----- 560 kg INCLUDES * 3-axis digital readout, brand SINO * Multifix TOOE5 quick-change tool post with 4 tool holders Lrjdporpn Uijfx Ab Nju * 3-jaw chuck 160 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rests * Foot brake (CE) * Electric brake (CE)

Kondisi: diremajakan ulang (bekas), Maschine mit Flachbett Spitzenweite: 1.270 mm (50") Umlaufdurchmesser über Bett: 380 mm (15") Umlaufdurchmesser über Planschlitten: 230 mm (9") Spindeldrehzahlen: 25 bis 2.000 U/min (16 Stufen) Spindelbohrung: 51 mm (2" Durchgang) Vollständiger Gewindeschneidsatz (Längs- und Quervorschub) Planscheibenaufnahme: D16 Reitstockkonus: MK 4 3- und 4-Backenfutter sowie Planscheibe Kühlmitteleinrichtung 2-Achsen-Digitalanzeige (DRO) Hauptmotor: 5,5 kW (7,5 PS) Maschine in gutem Zustand Gewicht ca.: 1,5 t Abmessungen ca.: 2.100 x 1.200 x 1.500 mm Lrjdpfxev I Ddqj Ab Nju Schnellwechselstahlhalter mit 3 Einsätzen

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 360 mm, kecepatan spindel (maks.): 2.300 rpm, daya: 4 kW (5,44 hp), DR 180 S x 750 mm Lathe Conventional precision lathe with stepless/smooth speed control Centre height: 180 mm Centre distance: 750 mm Bed width: 250 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 245 mm Turning diameter over bed gap: 500 mm Lrjdpfjtzkfkjx Ab Nsu Main spindle bore: 40 mm Main spindle mount: CAMLOCK D1-5 Spindle speed range: 0-2300 rpm Number of geared stages: 3 Main motor power: 4 kW Included equipment: - 24 V LED machine lamp - 3-axis digital readout FAGOR 40i TS with constant cutting speed function - "Multifix" quick-change toolpost with 5 holders - 3-jaw chuck - AIRLOC Schrepfer machine feet Machine available immediately ex stock!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Technical Data: >> Year of manufacture: 1987 Machine no.: 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock quill: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis digital readout, 12 months' manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200 tool programs, taper calculation, radius/diameter, quick-zero, counting direction toggle >> 1 piece 160 mm 3-jaw chuck, NEW, 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and collets, NEW, from 3 to 26 mm in 1 mm increments >> Multifix B size toolpost with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splashguard >> Coolant system Lrjdpswrmuxofx Ab Nou >> Machine levelling feet About the Machine: For sale is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely disassembled and newly painted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has undergone complete electrical and mechanical inspection. A full oil change has been carried out. This newer generation of Weiler lathes is highly user-friendly. Take advantage of the opportunity to inspect and test the machine under power on site.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, EUROPA eturn VS390. Das Arbeitstier jeder Werkstatt oder Dreherei, mit einem Planschub von 390 mm über dem Bett und wahlweise 760, 1000 oder 1250 mm Spitzenweite. Newall-Digitalanzeige (DRO) und Bison-Futter gehören bei allen Europa-Drehmaschinen zur Standardausstattung. Maschinenspezifikation EUROPA eturn VS390 Planschub über Bett: 390 mm Spitzenhöhe: 190 mm Planschub über Planschlitten: 240 mm Planschub im Bettspalt: 610 mm Spindelaufnahme: D1-6 (Camlock) Spindeldurchlass: 54 mm Die EUROPA eturn VS390-Serie ist eine Leit- und Zugspindel-Drehmaschine mit Bettspalt, 390 mm Planschub über dem Bett, 610 mm im Spalt sowie drei Spitzenweiten: 750 mm (30”), 1000 mm (40”) und 1250 mm (50”). Vergleichbar mit einer Colchester Triumph. EEMT: Europa Energy Management Technology: Die Maschine schaltet nach einer voreingestellten Inaktivitätsdauer in den Energiesparmodus. Ein Tastendruck auf den Sicherheitsschalter genügt und die Maschine ist wieder betriebsbereit. Reduziert die Energiekosten. Lrodpfx Aenzhtwjb Neu BISON: 250 mm Dreibackenfutter (Scroll) und Vierbackenfutter mit unabhängiger Backenverstellung samt gehärteten Backen serienmäßig. Gefertigt nach DIN 55029 und ISO 702/11 für höchste Präzision. Europäische Produktion. NEWALL: Das NEWALL NMS300 Digital-Messsystem (DRO) ist professionell auf dem Support montiert – optimal für einfache Bedienung und maximale Übersicht direkt am Arbeitsbereich. Das DRO bewegt sich synchron mit dem Support. Elektronische Drehzahlregelung: Jeder Maschinentyp ist mit einem Schneider-Frequenzumrichter für exakte und stufenlose Spindeldrehzahlregelung ausgestattet – ideal zur Anpassung an die jeweiligen Zerspanungsanforderungen. Keine versteckten Kosten! Sofort drehbereit geliefert: Ein Schnellwechselstahlhalter mit Haltersatz – die EUROPA eturn VS ist sofort einsatzbereit. DIN8605: Die gesamte EUROPA eturn VS-Serie wird nach den strengen Werkzeugmaschinen-Standards der DIN 8605 gefertigt.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, For sale: Voest DA180/0.8 lathe, ideal for small to medium-sized workpieces. This lathe is renowned for its stability and precision, making it an excellent choice for small workshops and manufacturing applications. The machine is equipped with a quick-change chuck, and a tool holder is included. Technical Data: • Model: Voest DA180/0.8 • Swing over bed: 360 mm • Swing over cross slide: 200 mm • Distance between centers: 750 mm • Spindle bore: 36 mm • Speed range: 45 – 1800 rpm (variable adjustment) • Motor power: 0.8 kW • Weight: approx. 1000 kg Advantages: • High precision: Ideal for fine machining and small to medium-sized parts • Reliable and robust: Perfect for daily operation • Easy to use: User-friendly controls with precise adjustment features • Compact design: Saves space in the workshop while remaining powerful Condition and Accessories: The lathe is in good condition and has been regularly maintained. The scope of delivery includes standard tools and clamping equipment. Approximately 30 collets for the quick-change chuck and a separate 3-jaw chuck are included. Lrjdpfx Abevad Nko Nsu Asking price: EUR 6,500,-- plus VAT, ex works The machine can currently be inspected under power. This offer is subject to change and non-binding. Specifications and equipment are subject to alteration and prior sale. Used machines are sold as seen and inspected, without warranty. Price is ex works, excluding packaging and insurance unless otherwise agreed. The price is subject to legally applicable VAT. Payment is due prior to loading, as is customary for used machinery.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Swing diameter over bed: 320 mm Swing diameter over cross slide: 185 mm Turning length: 1000 mm Spindle bore diameter / Mount: 32 mm Spindle speeds (12): 85 - 2000 rpm Longitudinal feeds: 0.006 - 1.77 mm/rev Cross feeds: 0.003 - 0.888 mm/rev Metric threads – pitch: 0.1 - 28 mm Module threads: 0.1 - 1.75 mm Inch threads: 2.5 - 75 TPI Operating voltage: 400 V / 50 Hz Drive power: 2.2 kW Machine weight approx.: 0.8 t Space requirements approx.: 1.8 x 0.8 x 1.4 m Quick-change toolpost with 5 holders, Steady rest, 3-jaw chuck Ø 200 mm, Lrsdpstv Iibefx Ab Nou Coolant system,

Kondisi: diremajakan ulang (bekas), Gapbett-Drehmaschine Spitzenweite: 1.520 mm Umlaufdurchmesser über Bett: 560 mm Spindeldrehzahlen: 18 - 1400 U/min Spindelbohrung: 90 mm (3,5") Spannfutteraufnahme: D1-11 Reitstockkegel: Morsekonus Nr. 5 Schnellwechselstahlhalter mit 4 Haltern & Schlüsseln Neues 3-Backenfutter Kühlmitteleinrichtung Neues 2-Achsen-Digitalanzeigesystem (DRO) Ljdpfx Aboq N Ay Ae Nsru Spannfutter-Schutzvorrichtung: wird noch bestätigt 6 Monate Gewährleistung

Kondisi: sangat baik (bekas), BREDA BRF 150 x 800 mm parallel lathe Machine from a school closure. Excellent condition, ready for use. Lredpjif Rrzefx Ab Nsu Centre height: 150 mm Distance between centers: 800 mm Swing over carriage: 185 mm 3-jaw self-centering chuck: Ø 160 mm Spindle speed: 47 - 1440 RPM Spindle bore: 42 mm Toolpost included Bed width: 260 mm Tailstock taper: MT3 Steady rests included 4-jaw faceplate included Tailstock included

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Excellent Condition! Technical Specifications: >> Year of Manufacture: 1991 >> Machine No.: 91-160-2804 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: from 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet locking >> Tailstock: Morse Taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Imperial, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle Brake: switchable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Equipment: >> New 3-axis digital readout by K&C, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switching >> Quick-action collet chuck, collets from 1 to 29 mm increasing by 1 mm >> NEW 160 mm 3-jaw chuck with jaws >> Multifix size A with 2 tool holders Lodjwv S Ufepfx Ab Noru >> Electrical chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe, built to toolmaker accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely disassembled and repainted in light grey. All slides run very smoothly and evenly. The Weiler operates quietly even at high spindle speeds. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be machined to a ground finish. You are welcome to inspect the machine under power on site and see the condition for yourself.

Kondisi: baru, Center distance ----- 1000 mm Centre height ----- 180 mm Swing diameter ----- 360 mm Spindle bore ----- 52 mm Lredpfx Ajga Tz Heb Nsu Bed width ----- 187 mm Spindle speed ----- 90-2000 rpm Motor ----- 1.5 kW INCLUDED * 3-axis digital readout, brand SINO * Quick-change toolpost, Multifix type TOOE5 with 4 holders * Electrical brake * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED lighting and coolant system * Fixed and travelling steady rests * Box with assorted tools

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Lathe EMCO Maximat V13 380 Volts Serial No.: D1E8706022 Machine No.: 99826 Condition: used Location: 86928 Hofstetten Lsdpfjv H Uklsx Ab Njru Price: €8,900 / net

Kondisi: baru, Tahun pembuatan: 2025, Swing diameter over bed 390 mm Swing diameter over cross slide 240 mm Turning length 1250 mm Centre height 190 mm Spindle bore 54 mm Drive power 5.5 kW - New machine - - Handwheel on the left side of the carriage - with 3-axis digital readout FAGOR INNOVA 30iT * For more information on the exact standard configuration Lsdpfswp Trlsx Ab Njru and available options, please visit our website or contact us directly by phone *

Kondisi: baik (bekas), Tovaglieri parallel lathe Used, previously owned by an educational institution. Excellent condition. Center height: 180 mm Lodpfx Askt U E Ijb Neru Distance between centers: 700 mm Spindle bore: 45 mm Supplied accessories included. 4 units available, subject to prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Centre height: 200 mm >> Swing over bed: 400 mm >> Swing over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, continuously variable from 35–3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required space / dimensions (approx.): Length 1.900 x Depth 0.9 x Height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis digital position display Lodpfewag Stjx Ab Neru >> 1 three-jaw chuck with 1 set of jaws >> Toolholder with 3 tool pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, in a scarcely used condition. The machine is, of course, fully functional. All carriage movements are very smooth and even. The bed ways are in excellent condition. Take advantage of the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: baru, Tahun pembuatan: 2024, Swing diameter over bed: 350 mm Swing diameter over cross slide: 196 mm Turning length: 650 mm Center height: 170 mm Spindle bore: 42 mm Drive power: 7.5 kW - New machine - with 3-axis ACU-RITE digital readout including constant cutting speed and traversable over the entire bed length, MULTIFIX quick-change toolpost, size MB Lrodpfx Aswp Tpksb Neu * For more information regarding the exact standard equipment and available options, please visit our website or contact us directly *

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, en-Weiler Praktikant 160 B Leadscrew and Feed Shaft Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of manufacture: 1986 Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds (8 steps): from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock Lrsdpfx Abowthbie Nou >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake selectable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories and Features: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck, collets as new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: A Weiler Praktikant 160 B leadscrew and feed shaft lathe is being offered here, built to toolmaker’s precision and in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled and newly painted in light grey. All cross slides move very smoothly and evenly. The Weiler also runs smoothly at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and capable of producing ground-like surface finishes. Take the opportunity to view the machine under power on site and see the condition for yourself.

Kondisi: baru, Tahun pembuatan: 2025, Swing diameter over bed 330 mm Swing diameter over cross slide 210 mm Turning length 635 mm Lrsdpfx Ajwp Tfxjb Nsu Centre height 167 mm Spindle bore 40 mm Drive power 2.2 kW - New machine - with 3-axis digital readout ACU-RITE and MULTIFIX quick-change tool post, size MA * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads Lsdpjwrm Dtjfx Ab Njru About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis K&C Digital Readout, NEW. Overhauled, including acceptance protocol certifying new-machine tolerances. Lredpfx Abjvrdlce Nju Technical Specifications: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Distance between centres: 650 mm >> Spindle speeds: 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5, with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Electrically selectable spindle brake >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Equipment & Accessories: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty, incl. operation manual Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, selectable count direction >> New collet chuck, NEW collets 3–25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix tool post size A, with 3 steel holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating manual and spare parts plan (PDF) About the Machine: Offered is a Weiler Praktikant 160 B engine lathe with leadscrew and feedscrew, reconditioned to toolroom accuracy and fully geometrically overhauled, including an acceptance protocol confirming new-machine tolerances. Safety features: electronic spindle guard, covers for leadscrew and feedscrew, 2 emergency stop buttons, and a braking motor. This latest generation of Weiler lathes is highly user-friendly and enables ground-like surface finishes. Take the opportunity to inspect and test the machine under power onsite to verify its condition.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C - NEW Geometrically overhauled with acceptance protocol for new machine tolerances! Ljdovambcopfx Ab Neru Technical Data: >> Machine No. 90-1495 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter selection, quick zeroing, counting direction selection >> Collet chuck system, new collets from 3 to 26 mm in 1 mm steps >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix quick-change toolpost, new, size A, with 2 new tool holders >> Bed stop >> Electric chuck guard, new >> Machine lamp, LED, new >> Rear splash guard >> Operating manual >> Coolant device >> Machine levelling feet About the Machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, absolutely as-new condition. The guideways have been newly ground and hand-scraped. Acceptance as per inspection protocol. A very fine machine with electronic spindle guard. The accessories—collets, chuck, Multifix—are new. Spindles, nuts, bearings, belts, and wipers have been renewed. Take the opportunity to view this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Ledpfx Abewvuf Tj Nsru Technical Data: >> Year of manufacture: approx. 2000 Machine No. D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges from 35-3000 rpm, infinitely variable >> Tailstock quill travel: 120 mm >> Tailstock: Morse taper 3 (MT3) >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required space / footprint: approx. Length 1.6 x Depth 0.9 x Height 1.3 m >> Weight: approx. 730 kg Accessories and Equipment: >> New 3-axis digital readout by K&C, 12-month manufacturer's warranty, with operating manual Functions: Metric/inch switch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switch >> 1 pc. new 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix B toolholder with 2 holders >> Chip guard/rear splash guard >> Coolant system About the machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year of manufacture 2000, in excellent condition. The machine is, of course, fully functional. The bed ways are in very good condition. The Emco is equipped with a new 3-axis K&C digital readout and a new 3-jaw chuck. Take advantage of the opportunity to view this machine under power on site and convince yourself of its condition.