Beli Pusat pemesinan universal mulai dari 1000 mm lintasan X bekas (157)

Kondisi: baik (bekas), Tahun pembuatan: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Centre Year of manufacture: 10/2012 Control unit: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel paths X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ± 121° C-axis travel: ± 211° Feed speed X/Y/Z = 60/60/40 m/min New milling spindle installed on 19 May 2025 Equipment: - 5-axis fork-type head - Milling spindle: 15 kW/12 Nm / 24,000 rpm For milling, drilling, and sawing - Disc tool changer: 12 tools, HSK-63 F - Pick-up station for saw blade - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for alternating machining - Vacuum clamping plate (WITTE brand) 2,100 mm x 1,200 x 42 mm - Chip conveyor - Extraction unit (LOSMA NEWTON N6 brand) Included in delivery: Approximately 35 tool holders / Operating manual & documentation For equipment, technical data, and transport drawings – see PDF. Illustrations, content and specifications are non-binding and provided without guarantee. All other accessories shown in photos and videos are not included in the scope of delivery, and thus are not part of this sale. The scope of delivery only includes accessories that are explicitly listed here, in the order confirmation, and the invoice. FCA (Free Carrier Truck-Loaded) D-97944 Boxberg Packing only Delivery time: Immediately Subject to prior sale / Payment due immediately upon completion of purchase. Cajdpfx Aajx Acpwjroa

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.200 mm, 5-axis gantry machining center. CYPORT CP 4030 (portal allrounder with a 4 x 3 m machining area). Retro-fit machine from 2005 (completely overhauled) “Hand in Hand” partnership with you for your retrofit solution HIGHLIGHTS • 5-axis simultaneous machining thanks to 2-axis fork-type milling head with direct drives • Powerful milling spindle with 12,000 rpm • High-rigidity double portal for superior machining results • Large working area with minimal footprint • All-round access to working area • Tool magazine with 48 positions Travel distances X/Y/Z: 4,000 / 3,000 / 1,200 mm Portal clearance Y/Z: 3,280 / 1,400 mm Rapid traverse X/Y/Z: 30/30/30 m/min Feed force per axis: 10,000 N 2-axis NC milling head M 21 (CYTEC): Swivel range A-axis: +/-110° Swivel range C-axis: +/-360° Powerful CYTEC milling spindle: Tool holder: HSK-A 100 Speed: 18,000 rpm Power: 42/53 kW (100%/40% duty cycle) Torque: 201/253 Nm (100%/40% duty cycle) Tool magazine: Number of stations: 48 HSK-A100 Max. tool diameter: 105/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Control: HEIDENHAIN iTNC 530 5-axis path control Wireless electronic handwheel HR 410 Coolant system: Tank volume: 800 L External coolant delivery: 20 bar Internal coolant delivery: 40 bar Paper band filter Coolant-air blast switch outside Workpiece measurement system: Probe M&H – wireless technology Documentation CE certification Scope of retrofit: NEW COMPONENTS Ball screws NEW All bearings NEW Guide carriages NEW Tool changer NEW Counterbalance cylinders NEW Lubrication distributors NEW All wiring and cabling NEW All hoses NEW Bellows NEW PVC slats NEW Safety bumpers NEW Electrics (switches, relays, contactors, etc.) NEW Safety windows NEW Paintwork NEW FACTORY-REFURBISHED COMPONENTS C-axis A-axis Motor spindle Drive motors Hydraulic power unit Hydraulic valves Complete pneumatics * All wear parts within assemblies are replaced with new components. The condition of the components then matches the qualitative standards of the exchange program. RECONDITIONED COMPONENTS Machine table Slide / Z-ram X and U carriages Y carriage Y-beam Energy chains and cable tracks Coolant system Central lubrication Sheet metal covers All structural components have been inspected, sandblasted, re-ground / hand-scraped, measured, and subsequently re-painted. The accuracy of the structural components is equivalent to new machines. The machine can be inspected at any time. With attention to detail and the highest quality standards, EDEL Werkzeugmaschinen GmbH has been manufacturing high-precision machine tools for more than 30 years, specialising in complete machining of highly complex workpieces. Our machines’ capabilities range from the machining of high-strength materials to aluminium or plastics. The product portfolio extends from 5-axis and 6-axis universal machining centers, through 7-axis portal milling machines, up to gantry machines for workpieces up to 7 metres in length. Codpfxjivn Eue Aarsaa MADE IN GERMANY

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SX44T-1620237CFECH, jarak pergerakan sumbu X: 1.525 mm, jarak lintasan sumbu Y: 660 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 20 m/menit, produsen pengendali: HURCO, model controller: WINMAX, tinggi total: 3.300 mm, panjang total: 4.500 mm, lebar total: 3.500 mm, lebar meja: 660 mm, panjang meja: 1.675 mm, beban meja: 1.360 kg, diameter meja putar: 600 mm, berat keseluruhan: 12.000 kg, kecepatan spindel (maks.): 12.000 rpm, jarak dari tengah meja ke hidung spindel: 622 mm, jumlah slot dalam magazin alat: 40, diameter pemasangan: 40 mm, panjang alat: 250 mm, diameter alat: 75 mm, berat alat: 7.000 g, tegangan masuk: 400 V, frekuensi input: 50 Hz, akurasi pemposisian: 0,01 mm, akurasi pengulangan: 0,005 mm, HURCO VMX 60 SRTI CNC Universal Machining Center - Rated current: 65 A - Connection load: 93 kW - C-axis travel: 360° - B-axis travel: ±90° - Number of T-slots: 6 - T-slot width: 18 mm - Slot spacing: 100 mm - Rotary table load (evenly distributed): 500 kg - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 100 rpm - Tool diameter (all positions occupied): 75 mm - Max. total weight: 280 kg - B-axis positioning accuracy: ±7 seconds - C-axis positioning accuracy: ±7 seconds - B-axis repeatability: ±7 seconds - C-axis repeatability: ±7 seconds - Including mounted zero-point clamping plate, plate dimensions: 400 x 400 mm Casdpfx Asxw T Hcsaroa The machine is equipped with a RENISHAW 3D probe and a chip conveyor. Attention: The spindle inverter has been completely overhauled. TRANSPORT NOTE The machine can be transported on a truck with a width of 3000 mm. Attention: The item must be collected on a binding date between 19th and 23rd January 2026, exact date to be agreed. FCA D-76571 Gaggenau – loaded onto truck.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.800 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 2.000 mm, produsen pengendali: Heidenhain, model controller: 426-430, Area 5-sumbu dengan pergerakan sumbu X: 1800 mm, pergerakan sumbu Y: 2000 mm, pergerakan sumbu Z: 2000 mm, dan sumbu C 360 x 0,001 derajat. Kecepatan putar spindle 8000 rpm dengan dudukan alat SK 50. Pengganti alat dengan 60 posisi, ukuran meja 1700 x 1400 mm, dan beban maksimum meja 5000 kg. Csdpfoxzil Asx Aaroaa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, de-001 Caodpstq R Saofx Aarea

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Segera tersedia dari lokasi CH: Pusat pemesinan 5-sumbu Reiden Tipe: Reiden BRF 1 Tahun pembuatan: 2005 Spindel diperbarui tahun 2022 (28.000 Euro) Kontrol CNC Heidenhain iTNC 530 Handwheel elektronik Diameter meja: 800 mm Kapasitas beban meja: 800 kg Csdoxy Rafepfx Aarjaa Sumbu X: 1200 mm Sumbu Y: 600 mm Sumbu Z: 700 mm Sumbu A: minus 180 hingga plus 180 derajat Sumbu B: minus 90 hingga plus 90 derajat SK 40 Magazin 72 tempat IKZ 20 bar Jumlah sumbu terkontrol: 5 Daya pada spindel: 25 kW Kecepatan spindel: 0 – 6.300 rpm Feed X: 20.000 mm/menit Feed Y: 20.000 mm/menit Feed Z: 20.000 mm/menit Perangkat pendingin Conveyor serbuk Berat: 9 ton Harga: 36.500 Euro belum termasuk PPN dari lokasi.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 710 mm, jarak gerak sumbu Z: 710 mm, model controller: MILLPLUS iT HEIDENHAIN, beban meja: 800 kg, Pusat Pemesinan Simultan 5-Sumbu! DETAIL TEKNIS Cedpsxwlgzefx Aareaa Perjalanan X: 1.250 mm Perjalanan Y: 710 mm Perjalanan Z: 710 mm Luas meja: 1.500 x 800 mm Kapasitas beban meja: 800 kg Kecepatan putar: 12.000 rpm Motor spindle: 15 / 10 kW Taper spindle: SK 40 Magasin alat: 60 posisi DETAIL MESIN Kontrol: MILLPLUS iT HEIDENHAIN Daya terpasang: 44 kVA Dimensi & Berat Ruang yang dibutuhkan: ±3,5 x 2,65 x 2,65 m Berat mesin: ±10,5 t PERLENGKAPAN Sumbu B (-120 / +30) Meja putar NC terintegrasi di meja tetap Sistem pengukuran langsung Probe 3D inframerah HEIDENHAIN TS 640 IKZ 40 bar, 600 l Pistol pembersih Konveyor chip Perangkat lunak 3D Quickset Catatan: Mesin dalam kondisi berfungsi penuh. Meja putar dan sumbu X mengeluarkan suara.

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm Tool holder: SK40 Magazine positions: 30 pcs Table clamping surface: 630 mm Codjw Dud Sspfx Aarsaa Machine type: 5-axis CNC milling machine Manufacturer: DMG Model: DMU 60 P

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 13.864 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S844W-16201A7DFECH, jarak pergerakan sumbu X: 2.134 mm, jarak lintasan sumbu Y: 865 mm, jarak gerak sumbu Z: 762 mm, gerak cepat sumbu X: 18 m/menit, pergeseran cepat sumbu Y: 18 m/menit, produsen pengendali: HURCO, tinggi total: 3.500 mm, panjang total: 6.000 mm, lebar total: 5.000 mm, lebar meja: 865 mm, panjang meja: 2.184 mm, beban meja: 2.268 kg, kecepatan spindel (maks.): 12.000 rpm, jam operasional spindle: 4.381 h, jumlah slot dalam magazin alat: 40, diameter pemasangan: 40 mm, panjang alat: 300 mm, berat alat: 7.000 g, tegangan masuk: 400 V, akurasi pemposisian: 0,001 mm, akurasi pengulangan: 0,005 mm, Perlengkapan: konveyor serpihan, HURCO VMX 84 Swi CNC Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 50 kVA - Rated current: 72 A - Travel range A-axis: +-90° - Distance spindle nose to table: 147 - 909 mm - Positioning accuracy B: +- 10 arcseconds - Repeatability B: 10 arcseconds - Feed rate X and Y axis: 15,200 mm/min - Feed rate Z axis: 13,500 mm/min - Rapid traverse X and Y axis: 18 m/min - Rapid traverse Z axis: 13.5 m/min - Rapid traverse B axis: 33.3 m/min - Max. tool diameter with free adjacent stations and removed tool cover: 75 / 120 mm - Tool change time: 2.5 sec - Chip-to-chip time: 21.6 sec The machine is equipped with a 3D touch probe, a coolant system, and a chip conveyor. Transport information: Attention: The machine can be transported on a low-loader with a transport width of 3,000 mm. Caedpoxw R Tmefx Aaroa Important: The item must be collected firmly and bindingly between January 19th and 23rd, 2026, on a date to be agreed in advance. FCA D-76571 Gaggenau – loaded onto truck.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, Takumi VC1052 dalam kondisi seperti baru, dengan banyak aksesoris tahun pembuatan 2016 kontrol Siemens 828D dengan ShopMill mati daya otomatis x, y, z: 1060 x 520 x 610 mm spindel 12.000 rpm SK 40 holder pendinginan melalui spindel penukar alat 24 posisi konveyor serbuk dengan bak penampungan Cajdsxy Nnzjpfx Aaroa skimmer minyak pendingin (chiller) laju gerak cepat 36 m/menit handwheel elektronik filter penghisap kabut dokumentasi lengkap 2x ragum Cuter SP150 x 250 38x holder alat SK 40 set rel penjepit probe 3D set lengkap siap untuk milling dan boring. Mesin aktif tersambung listrik untuk inspeksi.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, universal-5-axis-machine-base Cjdpfx Aoxvrk Rearoaa

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 33.831 h, jarak pergerakan sumbu X: 1.250 mm, jarak lintasan sumbu Y: 880 mm, jarak gerak sumbu Z: 800 mm, model controller: '3D contouring control Millplus, berat benda kerja (maks.): 1.000 kg, panjang total: 7.000 mm, lebar total: 3.500 mm, berat keseluruhan: 3.902 kg, kecepatan spindel (min.): 18.000 rpm, daya motor spindle: 15.000 W, Year of manufacture: 2000 CNC control: 3D contouring control Millplus Axes Travel X-axis mm: 1250 Travel Y-axis mm: 880 Travel Z-axis mm: 800 C-axis indexing degrees: 360º (0.001) Feed rate m/min: 40 Rapid traverse m/min: 40 NC milling/turning table: Number of pallets: 1 Pallet dimensions mm: Ø1000 Max. workpiece weight kg: 1000 Max. torque Nm: 7900 Spindle Max. spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/continuous) Cooling Tank capacity liters: 600 Tool system Tool holder: CAT 40 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Caedpoxvrbijfx Aaroa Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Rinsing gun Prepared for RENISHAW probe Precision package Prepared for internal cooling (40/80 bar) Paper band filter Machine operating hours: Hours under power: 33,831 Spindle running hours: 6,328 Total power requirement kVA: 55 Base machine: Dimensions/weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, FS 480 Gantry-Type Machine – Immediately Available • Total travel range X=4800 mm, ideal for flexible machining of large components • Travel paths: X=4,800 mm, Y=1,500 mm, Z=3,500 mm • iTNC 530 CNC control with wireless HR 550 FS handwheel, operator’s cabin mounted on the gantry • 2-axis NC universal drilling/milling head, full simultaneous and positioning operation for each gantry • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar Cjdpfx Aaexvlrbsroaa • Dust protection packages for safeguarding guides and drives • BA 4 per gantry • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor on the rear side of the system • Process monitoring with ToolScope basic system • Additional operator panel at the rear of the machine • Partial enclosure consisting of work area and sheet metal door, rear side equipped with a safety fence providing unobstructed view into the work area • Includes fixators • Cooling units • Includes internal tool cooling (closed cooling circuit) with chiller unit • Short delivery time, available immediately, ---subject to prior sale--- Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!!

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, dijual MACHINING CENTER CU 1000 PILOTE TECHNOLOGIES (1998) 1000x500y500z Csdpfx Asxv Ah Toarsaa CNC Fanuc OM 3 sumbu dengan pembagi sumbu ke-4 tahun 1998

Kondisi: bekas, Tahun pembuatan: 2010, 1 Cedpfx Aaoxvdq Aerjaa

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1986, Teile, die mit der Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Csdpjxvaz Rofx Aareaa

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, translation-01 Caodsxulavepfx Aaroa

Kondisi: hampir baru (bekas), Tahun pembuatan: 2005, jam operasional: 48.898 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, produsen pengendali: Heidenhain iTNC 530, berat benda kerja (maks.): 2.000 kg, tinggi total: 3.400 mm, panjang total: 6.000 mm, lebar total: 4.500 mm, kecepatan rotasi (min.): 30 rpm, berat keseluruhan: 15.800 kg, kecepatan spindel (min.): 18.000 rpm, jumlah slot dalam magazin alat: 40, Year of manufacture: 2005 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 1000 Travel Y-axis mm: 1000 Travel Z-axis mm: 1000 C-axis indexing degrees: 360º (0.001) A-axis indexing degrees: 130º B-axis indexing degrees: 0-190º Cjdpfoxur Sxex Aarsaa Feed rate m/min: 60 Rapid traverse m/min: 60 NC milling/turning table: Number of pallets: 1 Pallet dimensions mm: Ø1100x900 Max. workpiece weight kg: 2000 Table rotational speed rpm: 30 Spindle Max. spindle speed rpm: 18000 Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 980 High-pressure cooling bar: 40-80 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 40 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probe Rinsing gun Central air blast selectable via M-function Laser tool measurement for tool length and diameter 3D quickSET Prepared for internal cooling (40/80 bar) Paper band filter Machine operating time: Power-on hours: 144180 Spindle operating hours: 48898 Total power requirement kVA: 65 Base machine: Dimensions/Weight Length mm: 6000 Width mm: 4500 Height mm: 3400 Weight kg: 15800

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2010, • Travel range: X = 3,100 mm, Y = 1,950 mm, Z = 1,390 mm Cjdpfjxvlqqox Aarsaa • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining, 3,000 mm x 1,600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning operation • Spindle: 10,000 rpm, HSK 100 interface, 130 Nm spindle torque • Tool changer system: HSK 100 / 40 pockets for tools up to 750 mm in length • Chip augers in X-axis for optimal chip evacuation • Chip conveyor (scraper type) for cross transport, manufacturer: Knoll • Coolant supply, 900 L, manufacturer: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole machining • Full enclosure with safety glass panels, open at the top for optimized crane loading • Split sliding doors at the front • Split sliding doors at the operator side • Wireless probe RMP 60 • Including wash gun • Including platforms at loading and operator sides • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced including bearings in September 2021 • X-axis linear guide and carriages replaced in July 2023 • Milling spindle overhauled in May 2023 (new clamping set, new clamping cartridge, new rotary union, general inspection) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: leveling shoes • Optional: commissioning/installation • Optional: transport • Total spindle hours: 23,122 • Total machine hours: 53,991 • Year of manufacture: 2010 Subject to prior sale

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 40.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar meja: 750 mm, panjang meja: 2.900 mm, beban meja: 2.150 kg, 5-axis machining center DMG MORI - DMF 260-7 X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis: 360,000° B-axis: -110° to +110° Table length: 2,900 mm Casdpfxjxuqv Aj Aarja Table width: 750 mm Table load capacity: 2,150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: baik (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 500 mm, Perlengkapan: konveyor serpihan, Excellent overall condition. Previously operated by a plastic mold manufacturer, primarily for engraving applications. Minimal cutting forces and low machine load. Travel range: X=1200 mm, Y=800 mm, Z=500 mm. Spindle speed: 0–8,000 rpm. Main spindle drive power: 11 kW. Feed rate: 0–30 m/min. Table dimensions: 1,320 x 800 mm. Maximum table load: 2,000 kg. 20-position automatic tool changer. Maximum tool diameter: 63 mm. Tool length: 200 mm. Tool holder: SK 40. Equipped with Heidenhain 3D touch probe, type TS 220. Coolant supply system. Chip conveyor. Optional extraction unit. Full enclosure. CNC control: Heidenhain TNC 426 PB digital. Heidenhain electronic handwheel HR 410. Cajdpfx Aoxxklloarja

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2002, jam operasional: 54.981 h, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 1114 000273 3, jarak pergerakan sumbu X: 1.080 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, produsen pengendali: Haidenhain, model controller: HEIDENHAIN TNC 530, tinggi total: 2.500 mm, panjang total: 6.200 mm, lebar total: 3.802 mm, lebar meja: 795 mm, panjang meja: 1.500 mm, beban meja: 900 kg, berat keseluruhan: 9.500 kg, jam operasional spindle: 14.170 h, hidung spindel: SK40, jumlah slot dalam magazin alat: 32, berat alat: 8.000 g, Perlengkapan: dokumentasi / manual, konveyor serpihan, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Cedoxxamxjpfx Aarjaa Control: HEIDENHAIN TNC 530 Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: NC rotary table (Nikken) Large NC rotary table Tailstock Handwheel Inspection An inspection under power is possible at any time by prior appointment. Condition: Used condition according to age and previous use Known defects: Ball screw on X-axis worn / Overhaul required Possible cable or motor defect on Y-axis Completed repairs: 2017 – Handwheel retrofit kit 2022 – Replacement of chip conveyor auger 2024 – New cylinder/ linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out Important note / Disclaimer The machine is expressly sold as defective, without warranty, without guarantee and with exclusion of any liability for material defects. All technical data has been provided to the best of our knowledge, however, they are not binding. No liability is assumed for completeness, correctness or up-to-dateness of the specifications. The sale is made as inspected and with exclusion of any subsequent negotiation.

Kondisi: bekas, Tahun pembuatan: 2016, jam operasional: 24.000 h, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 880 mm, gerak cepat sumbu X: 100 m/menit, pergeseran cepat sumbu Y: 100 m/menit, pergerakan cepat sumbu Z: 100 m/menit, kecepatan pemakanan sumbu X: 100 m/menit, laju pemakanan gandar Y: 100 m/menit, laju pemakanan sumbu Z: 100 m/menit, beban meja: 400 kg, kecepatan spindel (min.): 10.000 rpm, jam operasional spindle: 500 h, daya motor spindle: 40.000 W, jumlah slot dalam magazin alat: 36, panjang alat: 520 mm, diameter alat: 205 mm, Area Kerja 5-Sumbu: -> Sumbu X 1500 mm -> Sumbu Y 1250 mm -> Sumbu Z 880 mm Kecepatan Maju/Cepat: -> Sumbu X 100 m/menit -> Sumbu Y, Z 100 m/menit Akselerasi Sumbu: -> Sumbu X, Y 7 m/s² -> Sumbu Z 10 m/s² -> Jerk 150 m/s³ Kapasitas Beban Meja: -> Berat maks. 400 kg Spindle: -> Dudukan alat HSK 100 -> Rentang putaran 10.000 rpm -> Daya (S6/40% siklus) 40 kW -> Torsi maks. 175 Nm Majalah Alat: -> Posisi 36 -> Panjang alat maks. 520 mm -> Diameter alat maks. (dengan slot samping kosong) 205 mm -> Berat alat maks. 20 kg -> Total beban 200 kg -> Waktu pergantian alat 3 s Mesin/aset tidak termasuk alat/fikstur atau gripper terkait produk apapun (robot). Cedpfsxtndzjx Aarsaa

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: X-axis travel: 1250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm CNC control: Heidenhain TNC 430 Tool changer: 60 positions Tool holder: SK 50 Caedjtq Nlcspfx Aarea Spindle speed: 8000 rpm Pallet size: 1000 x 800 mm Total power requirement: 56 kVA Machine weight approx.: 14.3 t Space requirements approx.: 5.5 x 3 x 3.1 m 5-axis machine with servo-controlled universal milling head as B-axis Double pallet changer incl. 2 pallets 1000 x 800 mm Production package, comprising: - Through-spindle coolant system (IKZ) with 40 bar operating pressure, 900 l coolant tank (2.25 x 1.3 x 2.2 m / 950 kg) - Chip conveyor (4.85 x 1.2 x 1.75 m / 600 kg) - Rotating viewing window - 3D probe RENISHAW MP 10 - Electronic handwheel - Mechanical tool breakage monitoring Accessories (SK 50 tool holders) Approx. 100,200 operating hours, approx. 52,500 spindle hours, last spindle replacement in 2020

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, Immediately available travelling column machine FS 2100 • Total travel path X=21,000 mm, ideal for flexible machining of large components • Travel distances X=21,000 mm, Y=1,500 mm; Z=3,500 mm • iTNC 530 control with wireless handheld unit HR 550 FS, operator cabin on the travelling column Cedpfx Aaoxt En Doroaa • 2-axis NC universal drilling/milling head, fully simultaneous and positioning operation per column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the protection of guideways and drives • BA 4 per travelling column • Wireless probe RMP 60, manufacturer: Renishaw • Work area monitoring with network camera and monitor at the rear of the system • Process monitoring ToolScope base system • Additional control panel at the rear of the machine • Partial enclosure consisting of working area and sheet metal door, rear with safety fence for a clear view into the working area • Includes fixators • Cooling units • Includes internal tool cooling (closed cooling circuit) with cooling unit • Short delivery time, available immediately ---Subject to prior sale--- Inspection by appointment possible Spindle hours: approx. 9,079 SPECIAL PRICE!