Beli Mesin pembengkok pelat bermotor untuk ketebalan lebih dari 14 mm bekas (120)

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the frame * Protected against overload * The upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * The positions of the rolls can be easily read via three digital displays * Easy part removal with a hydraulically opening head and automatically rising shaft * Very easy operation with movable control panel * Welded steel construction body * Forged or rolled SAE 1050 (CK 50) steel shafts, induction-hardened * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system Ledpfx Ajxw Ecvoglehb OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 16/20 mm Bending : 20/25 mm Upper & Lower Roll : 380 mm Side Roll : 300 mm Motor Power : 31.5 kW Rolling Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, lebar kerja: 2.550 mm, ketebalan lembaran (maks.): 40 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * Lower, upper, and side rolls are operated by hydraulic cylinders attached to the frame, enabling precise up and down linear movement * Protected against overload * Upper and side rolls are driven by hydromotor and planetary reducer (all three rolls are motor-driven) * The position of the rolls can be easily read with three digital displays Lhsdjxw Ebxjpfx Aglsb * Hydraulic opening head and automatic lifting shaft allow easy removal of the bent workpiece * Very user-friendly operation with movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic synchronization system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 320 mm, diameter rol atas: 320 mm, diameter roll samping: 240 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * The lower, top, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload Lhjdoxw Ebljpfx Aglob * Top roll and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Easy to read roll positions thanks to three digital displays * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16 / 20 mm Bending: 20 / 25 mm Top & Bottom Roll Diameter: 320 mm Side Roll Diameter: 240 mm Motor Power: 20 kW Bending Speed: 1.5 - 5 m/min Length: 4350 mm Width: 1800 mm Height: 1950 mm Weight: 10,500 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jenis kontrol: Kontrol NC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, model controller: 4 axis with digital readout, jumlah rol: 4, diameter rol atas: 360 mm, diameter roll samping: 320 mm, diameter rol: 400 mm, panjang rol: 3.050 mm, lebar kerja: 3.000 mm, ketebalan lembaran (maks.): 20 mm, ketebalan pelat baja (maks.): 20 mm, ketebalan maksimum lembaran baja tahan karat: 26 mm, berat keseluruhan: 17.400 kg, panjang total: 5.500 mm, lebar total: 2.010 mm, tinggi total: 1.900 mm, daya: 18,5 kW (25,15 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, rol yang dikeraskan, pl_bending_machine_specs Lhsdpfx Aoxqyxljglsb

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 804, panjang rol: 2.550 mm, lebar kerja: 2.500 mm, ketebalan lembaran (maks.): 16 mm, ketebalan pelat baja (maks.): 16 mm, berat keseluruhan: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 Lhedpfx Ajvxbm Rogljb The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair platform can be purchased to go with the machine.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, nomor mesin/kendaraan: MG 3220 model 3roll prebending, diameter roller (bawah): 1.000 mm, diameter rol atas: 1.130 mm, diameter rol: 1.000 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 220 mm, ketebalan pelat baja (maks.): 220 mm, tebal plat aluminium (maks.): 220 mm, daya: 330,97 kW (449,99 hp), mount kerucut: 1.000 mm, kecepatan rotasi (jarak/waktu): 5.000 mm/menit, jenis arus masuk: tiga fasa, panjang kerja: 3.100 mm, Perlengkapan: dokumentasi / manual, henti darurat, Hydraulische Blechbiegemaschine 3-Walzen 3000x220 mm Planeten-Pinch-Pyramide Modell MG3220, 3-Walzen, Baujahr 2012 Kapazität: Plattenbreite: 3.000 mm Walzstärke: 220 mm Vorbiegung: 180 mm - 3 Walzen hydraulisch motorisiert, jede Walze einzeln mit Axialgetriebe angetrieben - Synchronisierte hydraulische Rotation der 3 Walzen mit variabler Geschwindigkeit - Planetenanordnung mit vollständig hydraulischer Vor-Pinch-Einrichtung - Digitale Positionsanzeigen der Biegewalzen - Walzen in doppelreihigen Schwerlast-Kegelrollenlagern gelagert - Überlastschutz: hydraulische Sicherheitsvorrichtung für alle 3 Walzen - Hochdruck-Hydraulikaggregat mit mehreren Ölpumpen - Installierte Gesamtleistung: 450 PS / Spannung: 380V, 50Hz - Hydrauliktank: 2.500 Liter Öl - Hydraulikölkühler/Refrigerator, autarkes automatisches Kühlsystem - Zentrales Bedienpult elektrisch fahrbar auf Rollen mit Joysticks und Digitalanzeigen - Not-Aus mit aktivem und passivem Sicherheitskonzept, hydraulisch und elektrisch Kapazitätsdiagramm (Stahlblech, Streckgrenze 280 MPa / 360 MPa): Breite – Innendurchmesser – Dicke mm mm mm 3000 5800 220 3000 4500 205 3000 3400 200 3000 2800 190 3000 2200 180 3000 1600 140 Walzenauftragslänge: 3.100 mm Obere Walzengröße: 1.130 mm Seitenwalzengröße: 1.000 mm Ausstattung & Zubehör (im Lieferumfang der Maschine): - Gehärtete Oberflächen aller 3 Walzen, extrem verschleißfest - Konische Biegung möglich, Walzen für Kegelneigung verstellbar & gehärtete Druckplatte - Zentrale Bedienkonsole mit elektrischen Joysticks Lodeuwdwajpfx Agljhb - Digitale Positionsanzeige der Biegewalzen - Not-Aus- und Sicherheitsvorrichtungen - Bedienungsanleitungen und Serviceunterlagen

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1971, Dijual mesin rol empat silinder tipe VRM HY 3000/18 ini Lhjdpfoxwqdrsx Agljb Sudah terpasang, dapat dicoba Berat 24.000 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, ketebalan pelat baja (maks.): 21 mm, Cesoia Sacma Hydromatic 1250 X 21 Lhedewq Sv Sjpfx Aglob Produsen: Sacma Model: Hydromatic C 11-12 Kapasitas Pemotongan: 21 mm Panjang Pemotongan: 1.250 mm Jarak Antar Tiang: 1.410 mm Cekungan: 250 mm Daya Motor Utama: 30 Hp Jumlah Pukulan per Menit: 25 Berat Total: 15,5 ton Stop Belakang Bermotor, stroke 1.000 mm Kode Internal: Svr 325

Tahun pembuatan: 1973, Kondisi: hampir baru (bekas), Gebrauchte BRONX Schwerlast-Anbiege-Rundbiegemaschine (Initial Pinch Pyramid Bending Rolls), Baujahr: 1973. Die Maschine war zuvor bei ROLLS ROYCE PLC in Derby, Großbritannien, installiert. Sie ist sofort verfügbar und befindet sich aktuell in Belgien, wo sie besichtigt werden kann. TECHNISCHE DATEN KAPAZITÄT Es gibt zwei Satz Angaben, jeweils für „Vorbiegen & Rundbiegen“ sowie „Nur Rundbiegen“: Material: Baustahl Zugfestigkeit: 28/32 t/in² Maximale Blechbreite: 3.350 mm (11’) Maximale Blechdicke bei dieser Breite: - Vorbiegen & Rundbiegen: 50 mm (2”) - Nur Rundbiegen: 63,5 mm (2½”) Minimaler Innendurchmesser der gebogenen Zylinder bei maximaler Kapazität: - Vorbiegen & Rundbiegen: 762 mm (30”) - Nur Rundbiegen: 953 mm (37½”) Maximale Blechdicke beim Warmbiegen (Endbiegetemperatur 850°C): Ljdpfx Agoh U Rzgslehb - Vorbiegen & Rundbiegen: 102 mm (4”) - Nur Rundbiegen: 127 mm (5”) Minimaler Innendurchmesser der gebogenen Zylinder bei maximaler Kapazität, Warmbiegen: - Vorbiegen & Rundbiegen: 1.016 mm (40”) - Nur Rundbiegen: 1.270 mm (50”) HAUPTABMESSUNGEN Rollendurchmesser: 686 mm (27”) Walzenkörperlänge: 3.403 mm (11’2”) Walzgeschwindigkeit: 3.600 mm/min (12 ft/min) Hauptantriebsmotor: 150 PS, Schleifringmotor Zwei Unterwalzen-Verstellmotoren: jeweils 50 PS, Schleifringmotor Kombinierter Betrieb von Schwenklager und Oberwalzen-Gegengewicht: hydraulisch Hydraulikaggregat-Motor: 10 PS Elektrischer Anschluss: 400/440 Volt, 3 Phasen, 50 Hz KEGELBIEGE-EINRICHTUNG: Zur Erleichterung des Biegens von konischen Formen ist an der Innenseite des Nichtantriebsgehäuses eine Gleitplatte angebracht. ELEKTRISCHE AUSSTATTUNG Motoren: - Hauptantrieb: 150 PS, halbstündige Nennleistung, Schleifring, fußmontiert - Unterwalzenverstellung: 50 PS, halbstündige Nennleistung, Schleifring, fußmontiert - Hydraulikaggregat: 10 PS, Dauerbetrieb, Käfigläufermotor, fußmontiert Steuerung: - Hauptantrieb: Wendeschütz-Steuerung mit Drahtwiderständen (5-min-Rating), 100% Volllastschaltung auf der ersten Rastung in jeder Richtung. Ausgestattet mit Abschaltverriegelung und Endschaltern (wo erforderlich). - Unterwalzenverstellung: Ebenso mit Wendeschütz-Steuerung und Endschaltern. - Hydraulikaggregat: Direktstarter mit Taster-Bedienung. Magnetventile für Zylinderbetrieb werden per Taster gesteuert. Hinweis: Für alle Steuergeräte ist vollständiger Schutz durch Leitungsschutzschalter mit Überlast- und Unterspannungsauslösung vorgesehen. AUSSTATTUNG & MERKMALE - Ersatzwalze im Lieferumfang ABMESSUNGEN Länge: auf Anfrage Breite: auf Anfrage Höhe: auf Anfrage Gewicht: 95 Tonnen HINWEIS: Alle Angaben erfolgen nach bestem Wissen, sind jedoch unverbindlich und ohne Gewähr auf Richtigkeit.

Tahun pembuatan: 1981, Kondisi: baik (bekas), Blechbiegemaschine SCHÄFER Lhsdpfx Agshufgpolsb Walzenlänge: 2.000 mm Walzendurchmesser: 220 mm Biegeleistung (Blechdicke): bis zu 20 mm Maschinengewicht: ca. 18.000–19.000 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, tegangan masuk: 400 V, frekuensi input: 50 Hz, Perlengkapan: dokumentasi / manual, henti darurat, rol yang dikeraskan, Mesin press pelet untuk disewakan – cocok untuk kayu, plastik (PE, PET), dan produk samping pertanian. Tersedia: 4 kW (50–100 kg/jam) atau 22 kW (200–350 kg/jam). Dilengkapi dengan berbagai matras untuk berbagai material. Ideal untuk uji coba, proyek percontohan, dan produksi sementara. Periode sewa fleksibel, pengiriman dan dukungan tersedia. 👉 Henkes Industries GmbH Ljdpfjxtwyrox Aglshb

Kondisi: baru, 1 Lhjdpfx Aoxrdn Hsglob

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 38,5 kW (52,35 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Lower, upper, and side rolls are moved up and down by pistons hydraulically connected to the machine frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (3-roll drive system) * Positions of the rolls can be easily read with three digital displays * Easily removable bent workpiece thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with the movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC controller for automation * Top crane (elevator) for supporting large diameter bending * Hydraulic side supports for supporting large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) Lhsdpfoxd S T Uox Agleb TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Kondisi: baik (bekas), Tahun pembuatan: 2019, diameter rol atas: 390 mm, lebar kerja: 2.500 mm, ketebalan pelat baja (maks.): 28 mm, panjang kerja: 2.500 mm, Manufacturer: FACCIN Model: 4HEL 2538 Control: Siemens TOUCH Year of manufacture: 2019 Top support Side support with infeed fingers Fully hydraulic machine Central lubrication system Hardened rolls Specifications Metric | US Standard -----|----- Roll width: 2500 mm Plate thickness at 3x top roll diameter: 24 mm Plate thickness at 5x top roll diameter: 28 mm Plate thickness during prebending: 24 mm Top roll diameter: 390 mm Bottom roll diameter: 370 mm Side roll diameter: 300 mm Number of rolls: 4 Bending speed: 0 - 5 Bottom roll adjustment: 0 - 200 mm/min Side roll adjustment: 0 - 200 mm/min Control: SIEMENS PGS Classic TOUCH Top support: Yes Side support: Yes Number of driven rolls: Yes Approximate Dimensions Length: 6200 mm Width: 2400 mm Height: 3800 mm Weight: 24000 kg Lodpev Tbcbjfx Agljhb Please note: The information provided on this page has been obtained to the best of our knowledge and, where possible, directly from the manufacturer. The information is provided in good faith; however, accuracy cannot be guaranteed. Therefore, the information does not constitute representation or contractual terms. We recommend verifying all important details.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1978, nomor mesin/kendaraan: 4303, Working width: 3000 mm Sheet thickness: 15 mm Sheet thickness for bending: 10 mm Upper roller diameter: 320 mm Lower roller diameter: 310 mm Lhjdpfx Aed D Nxxoglsb Working speed: approx. 5.5 m/min Electrical connection: 380 V kW Weight: approx. 17,000 kg Required space: 5450 x 2100 x 2450 mm

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Plattenbiegemaschine, 3000 mm Kapazität, H. Vuillot 3000 mm, Gebrauchtmaschine Hersteller: H. Vuillot Blechkapazität: 3000 x 27 mm Oberwalzendurchmesser: Ø445 mm Unterwalzendurchmesser: Ø330 mm Baujahr: 1972 Lhedpowcqpnsfx Agljb

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 1.550 mm, lebar kerja: 1.550 mm, ketebalan lembaran (maks.): 15 mm, ketebalan pelat baja (maks.): 15 mm, daya: 7,5 kW (10,20 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Side rolls move up and down orbitally with hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * Folded pieces can be easily removed thanks to hydraulically opening head Lhsdpoxbzr Uofx Agleb * Easy operation with movable control panel * Lower roll positions can be easily read with two digital indicators * Welded steel construction body * Induction hardened, hot-rolled steel shafts (SAE 1050 / CK45) * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Ground and polished rolls for special applications * Rolls for profile bending * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 550 mm, diameter rol atas: 550 mm, diameter roll samping: 450 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 70 kW (95,17 hp), masa garansi: 12 bulan, Perlengkapan: henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, en_STANDART EQUIPMENT * The lower, upper, and side rolls perform linear up-and-down movement by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically upward-moving shaft enable easy removal of the bent workpiece * Very easy operation with a mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large-diameter bending support * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Lodpfjxbzptox Agljhb Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 15 mm, STANDARD FEATURES * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotors and planetary gearboxes * Foldable hydraulic head for easy removal of bent parts * Easy operation with a mobile control panel * Lower rolls' positions are easily read with two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with roller bearings * Hydraulic balancing system for parallel movement of the rolls * Extended shaft ends for mounting profile and tube bending rolls Lhedpfsw Sld Rox Agleb OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for assisting large diameter bending * Ground and polished rolls for special applications * Roll sets for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the rolls TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 10/13 mm Bending : 13/15 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 5150 mm Width : 1500 mm Height : 1550 mm Weight : 9050 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 350 mm, diameter rol atas: 350 mm, diameter roll samping: 260 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 20 mm, EN STANDARD EQUIPMENT * The upper, lower, and side rolls move vertically via pistons hydraulically connected to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3 roll motor drive) * The positions of the rolls can be easily read via three digital indicators * Easy removal of the bent part thanks to a hydraulically opening head and automatically lifting shaft Lhedjw Smdfepfx Aglsb * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Special ground and polished rolls for special applications * Stepless speed control system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 12/16 mm Bending Capacity: 16/20 mm Upper & Lower Rolls: 350 mm Side Rolls: 260 mm Motor Power: 23.5 kW Rolling Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally by means of a hydraulic piston * Protected against overloading * All rolls driven by hydromotor and planetary reducer * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls easily readable via two digital indicators * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts Lhodpjw Slg Sjfx Agljb * Extended shaft ends for fitting section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (lift) for support in large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Section bending rolls for profiles * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16/20 mm Bending: 20/22 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4100 mm Width: 1500 mm Height: 1550 mm Weight: 7400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 30 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload Lhedpfx Asw Sl T Ssgleb * The upper and side rolls are driven by a hydromotor and planetary gearbox (all 3 rolls are motor-driven) * The positions of the rolls can be easily read with three digital indicators * Easy removal of bent parts thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 20/25 mm Rolling: 25/30 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, panjang rol: 4.100 mm, ketebalan lembaran (maks.): 25 mm, daya: 38,5 kW (52,35 hp), STANDARD EQUIPMENT * The lower and side rolls are actuated up and down by pistons hydraulically attached to the frame, providing linear movement. * Protected against overload. * Upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven). * The position of the rolls can be easily read via three digital displays. * Hydraulic opening head and automatically lifting shaft enable easy removal of the bent part. Lsdpfx Agew Sl I Nolehb * Very easy operation with mobile control panel. * Welded steel construction frame. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460). * Electronic balancing system (Ø500-550-580-620-680). * Dual-speed operation system. OPTIONAL EQUIPMENT * Automation with NC and CNC control. * Top crane (elevator) support for large diameter bending operations. * Hydraulic side supports for large diameter bending operations. * Hydraulic plate ejector system. * Ground and polished rolls for special jobs. * Infinitely adjustable speed control system. * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll: 460 mm Side Roll: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29500 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 350 mm, diameter rol atas: 350 mm, diameter roll samping: 260 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 25 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Positions of the rolls can be easily read by three digital position indicators * Hydraulic drop-end and automatically upward-moving shaft ensure easy removal of the bent part * Easy operation via a movable control panel * Welded steel frame construction * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Lsdow Smb Rspfx Aglehb Pre-Bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll Diameter: 350 mm Side Roll Diameter: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 280 mm, diameter rol atas: 280 mm, diameter roll samping: 220 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT * The bottom and side rolls perform linear up-and-down movements via pistons hydraulically connected to the frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gear reducers (all 3 rolls driven by motors) * The positions of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow for easy removal of the bent workpiece * Easy operation via mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for the parallel movement of the shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll: 280 mm Lsdpfx Agsw Smfcslohb Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg