Beli Sistem sudut bekas (29)

Kondisi: bekas, Spindel mortise 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig PC-Nexus Weinig Unicontrol 11 window manufacturing line with extensive tooling ----- Optionally available (for extra charge): - Weinig Univar 6 rebate machine (price on request!) - Götzinger PowerDrill drilling and milling center for windows and doors (price on request) Technical manufacturer description: ----- Item 1: Weinig Unicontrol 11 window line ----- Including existing tooling - IV 67 Wood and Wood-Alu - IV 77 Wood and Wood-Alu - IV 90 Wood Crosscut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Max. tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically in 8 positions for top-edge rounding Horizontal bottom rounding unit ----- Motor with brake: 1.5 kW, spindle diameter: 20 mm, clamping length: 25 mm, speed: 9000 rpm Max. tool diameter: 130 mm Axial adjustment mechanically coupled with the crosscut saw Radial adjustment pneumatically controlled Tenon and mortise spindle ----- With hydraulically clamped counter bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool diameter: 400 mm Tool clamping length: 640 mm Axial travel NC axis Default position below table: 5-10 mm Radial travel: fixed 1st profile spindle (conventional and climb milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial travel: 350 mm NC axis Radial travel: NC axis Default position below table: 5-10 mm 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions Horizontal top profiling unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool diameter: 130 mm Pneumatic adjustment to 8 positions, axial and radial 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter min. 140 mm, max. 232 mm Tool clamping length: 400 mm with counter bearing Axial travel: 350 mm NC axis Radial travel: NC axis Default position below table: 5-10 mm Synchronized guiding rail with transom support bar 2 feed rollers opposite the spindle, axially pneumatically controlled, 8 positions Vertical profiling unit, right, end of the machine Codsy T R Tuepfx Abvshc ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool diameter min. 112 mm, max. 210 mm Pneumatic adjustment to 8 positions, axial and radial Horizontal bottom profiling unit ----- Motor power with brake: 3 kW Spindle diameter: 40 mm Clamping length: 125 mm Spi...

Kondisi: diremaj di bengkel (bekas), Spindel alur 1 buah. Jumlah kepala frais 4 buah. Diameter spindel 50 mm Pengontrol Weinig, PC-Nexus Weinig Unicontrol 6 dengan spindel NC ----- Mesin dibersihkan dan diperiksa secara menyeluruh sebelum pengiriman. Ringkasan Data Teknis (aksesoris tambahan, jika ada, dapat ditanyakan) Pos. 1: Gergaji pemotong ----- > Gergaji pemotong elektronik, dapat disesuaikan secara horizontal dengan langkah tak terbatas > Jumlah alat: 1 buah > Kecepatan spindel: 2.800 RPM > Diameter spindel: 40 mm > Diameter alat maks.: 400 mm > Daya motor: 3,0 kW > Lampu penunjuk laser untuk mendeteksi bagian gergaji > Penghenti panjang NC, dipasang pada meja alur, termasuk penentuan posisi gergaji pemotong yang terintegrasi dalam pengontrol. > Panjang 3500 mm Chsdpfsvu Hfqsx Abvec Pos. 2: Spindel untuk membuat lubang pasak dan alur ----- > Jumlah alat: variabel, penyesuaian dengan langkah tak terbatas pada sumbu NC > Panjang penjepitan alat: 320 mm > Langkah spindel vertikal: variabel, penyesuaian dengan langkah tak terbatas 254 mm pada sumbu NC > Kecepatan spindel: 3500 RPM > Diameter spindel: 50 mm > Diameter alat maks.: 320 mm > Daya motor: 11 kW Pos. 3: 1. Spindel pembuat profil (spindel searah dan berlawanan arah) > Posisi: vertikal kanan > Jumlah alat: 1 buah > Panjang penjepitan alat: 120 mm > Kecepatan spindel: 6000 RPM > Diameter spindel: 50 mm > Jari-jari putar alat maks.: 232 mm > Daya motor: 7,5 kW Pos. 4: 2. Spindel pembuat profil ----- > Posisi: vertikal kanan > Jumlah alat: variabel, penyesuaian dengan langkah tak terbatas pada sumbu NC > Panjang penjepitan alat: 320 mm > Langkah spindel vertikal: variabel, penyesuaian dengan langkah tak terbatas 254 mm pada sumbu NC > Kecepatan spindel: 6000 RPM > Diameter spindel: 50 mm > Jari-jari putar alat maks.: 232 mm > Daya motor: 11 kW 2 rol pengumpan, relatif terhadap spindel, dikendalikan secara aksial secara pneumatis, 2 posisi. Panduan tangga terdiri dari: Rel panduan pada penghenti (area spindel searah), Rel penyangga tangga dari atas di area kepala frais profil vertikal kanan dan spindel pembuat profil. Pos. 5: Kepala frais profil horizontal di atas ----- > Panjang penjepitan: 40 mm > Diameter spindel: 40 mm > Daya motor: 3,0 kW > Kecepatan 5.850 RPM > Jari-jari putar alat maks. 130 mm > Langkah penyesuaian aksial 30 mm, 8 posisi dengan revolver pneumatik > Langkah penyesuaian radial 125 mm, 8 posisi dengan revolver pneumatik Pos. 6: 3. Spindel pembuat profil (spindel untuk pemasangan) ----- > Posisi: vertikal kanan > Panjang penjepitan alat: 160 mm > Langkah penyesuaian aksial 115 mm, 8 posisi dengan revolver pneumatik > Langkah penyesuaian radial 100 mm, 8 posisi dengan revolver pneumatik > Kecepatan spindel: 5.850 RPM > Diameter spindel: 40 mm > Jari-jari putar alat maks.: 210 mm > Daya motor: 3,0 kW Fitur Tambahan ----- > Dapat terhubung ke jaringan > Peralatan untuk mengubah tepi tanpa merusak > Paket suku cadang ganda > Sistem pengumpanan balik untuk pengoperasian oleh satu orang: sabuk putar > Pengontrol layar > Peralatan untuk membuat jendela miring > Indikator sudut elektronik untuk jendela miring > PC industri, pengontrol PC/NEXUS > Program produksi tipe Weinig > Tidak termasuk alat pemrosesan Belum ada gambar asli. Gambar menunjukkan mesin sejenis dari arsip kami ----- Harga mesin di atas dapat ditanyakan! ----- Opsi dengan biaya tambahan: EUR 6.500,00 Catatan: barang bekas...

Kondisi: bekas, 2 slot spindles Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window processing line, optionally with extensive tooling ----- Options available (with extra cost) IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 front doors Technical manufacturer description: ----- Item 1: Weinig Unicontrol 10 NC window processing line ----- Cut-off saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatically in 8 positions for edge rounding from above Horizontal corner rounding unit (bottom) ----- Axial movement mechanically connected to the cut-off saw 1st tenoning & slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Axial movement: NC axis Base position below table: 5-10 mm Radial movement: fixed 2nd tenoning & slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool diameter: 400 mm Tool clamping length: 320 mm Axial movement: NC axis Radial movement: NC axis Base position below table: 5-10 mm 1st profile spindle (climb & counter-rotation) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm 2nd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Horizontal profiling unit (top) Chjdezawizepfx Abvsc ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Max. tool diameter: 130 mm Adjustment pneumatically in 8 axial and radial positions 3rd profile spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool diameter: 140 mm Max. tool diameter: 232 mm Clamping length: 400 mm with counter support Axial movement: 350 mm, NC axis Radial movement: NC axis Base position below table: 5-10 mm Vertical profiling unit, right at machine end ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Max. tool diameter: 210 mm Adjustment pneumatically in 8 axial and radial positions Further accessories -----...

Kondisi: belum diuji (bekas), Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm Codpex H Al Nofx Abvohc > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...