Kondisi: bekas, Thread cutting head, tap chuck, thread chuck, tapping chuck, milling tool, thread cutting device Todpfx Abeu S Tcfjvjc -Manufacturer: Alfred H. Schütte, self-opening thread cutting head with quick-change tool holder -Type: SH 3/4" -Shank: Ø 40 mm -Dimensions: 265/130/H160 mm -Weight: 7.1 kg

Kondisi: bekas, Thread rolling machine, thread rolling head, segment thread rolling machine, cold forming machine, thread rolling head, rolling head Tedpfou Tyvhsx Abvec - Manufacturer: BWF, thread rolling head - Model: RK 12-20 - Thread rolls: M24 x 1.5 - Dimensions: Ø 120 x 180 mm - Weight: 5.6 kg

Kondisi: siap digunakan (bekas), HSS drill bits, milling cutters, taps, and saw blades. Tsdpfx Aevb Udnjbvsc Condition: Used and unused mixed lot, no scrap. Total quantity: approx. 648 pieces Weight: 184 kg.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Tsdpfx Abjh A S Htovoc Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Kondisi: baik (bekas), Quick-action clamp, quick-release fastener, quick-change vise, drilling fixture, machine vice, drill press vice, collet, chuck - Thread cutting head: self-opening thread cutting head - Type: CH7-44 - Mount: M48 - Collet: Ø 25 mm - Dimensions: 330/210/H135 mm - Weight: 17.4 kg Tsdpfsv Uw Amjx Abvjc

Kondisi: bekas, Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment Tsdpfju S Tbusx Abvsc - Manufacturer: Alfred H. Schütte, self-opening thread cutting head - Model: SH 1 1/4" - Shank: Ø 40 x 100 mm - Dimensions: 170/155/H225 mm - Weight: 8.6 kg

Kondisi: baik (bekas), Kepala pemotong ulir dengan rahang Strehler, penjepit pemotong ulir, mesin pemotong ulir, pemotong ulir pipa Tjdpfez Arhvex Abvjc -Produsen: Alrowa, kepala pemotong ulir dengan rahang Strehler -Tipe: No6 -Ukuran ulir (inci): 1 1/2 - 3" -Aksesori: termasuk 3 set rahang Strehler, lihat foto -Dimensi: 950/200/T150 mm -Berat: 15,7 kg

Kondisi: baik (bekas), Kepala pemotong ulir dengan rahang Strehler, penjepit pemotong ulir, mesin pemotong ulir, pemotong ulir pipa -Produsen: Alrowa, kepala pemotong ulir dengan rahang Strehler -Tipe: No23 Todpfx Ajz Aq Hkobvsc -Ukuran ulir inci: 1/4 - 1 1/2" -Dimensi: 730/150/T125 mm -Berat: 8,0 kg

Kondisi: baru, Thread diameter 12 mm Infinitely variable speed 375 rpm Working range 180 - 2000 mm Motor power 0.7 kW Weight 28 kg Electric tapping machines for M3 - M12 threads, angle adjustable. With a working range of 180 - 2000 mm. 7 pcs. quick-change chucks with slip clutch. Adjustable via display: Tedpfx Asd Iinnjbvjc Variable speed, adjustable depth, material selection, choice of main rotation direction, thread selection.

Kondisi: baru, Thread diameter: 12 mm Infinitely variable speed: 375 rpm Working range: 180 - 1000 mm Motor power: 0.7 kW Electric tapping machines for M3 - M12 threads, with adjustable angle. Includes 7 quick-change chucks with slip clutch. Adjustable via display: - Variable speed - Adjustable depth - Material selection - Choice of main rotation direction - Thread selection Tjdpfefg U Spjx Abvsc Optional: Clamping table with T-slots: 990x700x800 mm. Magnetic base. Also available for M14 to M24 and M27 to M33 threads.

Kondisi: baru, Thread diameter M3 - M16 mm Continuously variable speed up to 187 rpm Working range 180 - 2000 mm Motor power 0.7 kW Electric tapping machines for threads M3 - M16, Adjustable angle. 9 quick-change chucks with slip clutch. Settings via display: Tjdpfxsfg U Sqj Abvoc Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: Clamping table with T-slots: 990x700x800 mm. Magnetic base. Also available for: M14 to M24 and M27 to M33.

Kondisi: baru, Thread diameter M3 - M8 mm Electric tapping machines for M3 - M8 threads, Adjustable angle. 5 quick-change chucks with slip clutch included. Via display adjustable: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: Tedpfx Ajfg U Snsbvec - Clamping table with T-slots: 990x700x800mm. - Magnetic base.

Kondisi: belum diuji (bekas), nomor mesin/kendaraan: 23095, jenis arus masuk: tiga fasa, berat keseluruhan: 4.500 kg, frekuensi input: 50 Hz, tegangan masuk: 380 V, arus masuk: 17 A, Tidak ada harga minimum – penjualan dijamin dengan harga penawaran tertinggi! RINCIAN TEKNIS Todpfszt Sfpsx Abvoc Jenis arus: 3~ Frekuensi: 50 Hz Tegangan operasi: 380 V Tegangan kontrol: 220 V Arus nominal: 17 A Perlindungan Arus nominal sekering utama cepat: 35 A Arus nominal sekering utama lambat: 25 A Dimensi & Berat Dimensi (P x L x T): 3.800 x 2.100 x 2.000 mm Berat mesin: sekitar 4.500 kg

Kondisi: sangat baik (bekas), Thread cutting unit Efem No. 1 for internal threads Mount MK 2 Thread cutting head adjustable slip clutch Thread size M3 - M10 Tedpfxetqlq Ee Abvsc Mechanical condition: very good Visually, there are storage marks

Tahun pembuatan: 2011, Kondisi: bekas, Tool holder, 32 mm direct mount Gear ratio: 1:1.25 Angle adjustable from -20° to +20° Weight: 17.0 kg Dimensions (L x W x H): 180 x 120 x 260 mm Transverse thread whirling unit with 2 stations for driven tools. Very good condition Suitable for Maier Swiss-type lathes. - Original price: €16,100 - Prepared for 2 driven tool holders 2-020-W10-1001 (not included) Todpowa Uf Uofx Abvoc - Angle-adjustable whirling head

Kondisi: siap digunakan (bekas), Alat press REMS, press cordless ACC Li-Ion Plus, mesin bekas Produsen: Rems Tipe: ACC Li-Ion Plus Dimensi keseluruhan: Lebar: 520 mm Kedalaman: 290 mm Tinggi: 120 mm Fitur utama: Penggerak elektro-hidraulik Gaya penekanan: 32 kN Tedpfoxl E Nfjx Abvsc Cocok untuk fitting press pipa Ø 10–108 mm (hingga 110 mm dalam beberapa kasus) Motor universal: 1850 W Baterai: Li-Ion 14,4 V / 3,0 Ah (teknologi Li-Ion Plus) Elektronik multifungsi: soft start, perlindungan dari overload, penarikan otomatis (ACC) Penjepit rahang dapat diputar 360° Lampu kerja LED terintegrasi Desain ergonomis dan ringan: sekitar 4,3 kg Kondisi: Bekas, dalam kondisi kerja baik. Aksesori: baterai, charger

Kondisi: bekas, Kepala penyadap ulir BILZ Tipe DSPL 127 MK2 Ukuran ulir: M3 - M12 Poros sambungan: MK 2 Todpfx Aoy E T Dajbvec Kompensasi panjang: 30 mm Rentang penjepitan: Ø 2,5 - Ø 10 mm (diameter poros tap ulir) - Penjepitan kepala untuk poros tap ulir dan transmisi torsi pada 4-kant - Kopling pengaman yang dapat diatur untuk pembatasan torsi - Kompensasi panjang +10mm / -20 mm untuk pemotongan ulir dengan pitch presisi Diameter kepala terbesar: Ø 58 mm Panjang kepala: 120 mm Panjang total dengan poros: 215 mm Berat sendiri: 1,7 kg Kondisi sangat baik

Kondisi: baru, Thread diameter M6 - M30 mm Infinitely variable speed 58 - 205 rpm Working range 320 - 1500 mm Motor power 0.85 kW Weight 36 kg Electric tapping machines for threads M6 - M30, Adjustable angle. 11 quick-change chucks with safety clutch included. Adjustable via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: Tedpfjd Iinlox Abvsc Clamping table with T-slots: 990x700x800 mm. Magnetic base. Images show an M16 machine.

Kondisi: baru, Thread diameter: M3 – M16 mm Infinitely variable speed, max. 187 rpm Working range: 180 – 1000 mm Motor power: 0.7 kW Weight: 22 kg Electric tapping machines for threads M3 – M16, adjustable angle. Includes 9 quick-change chucks with slip clutch. Settings via display: - Variable speed - Adjustable depth - Material selection - Selection of main rotation direction - Thread selection Tjdpfx Abed Iinmjvec Options: - Clamping table with T-slots: 990 x 700 x 800 mm - Magnetic base. Also available for: M14 to M24 and M27 to M33.

Kondisi: baik (bekas), Maximum thread tapping capacity, metric thread: brass M33, cast iron M16, steel M14, incl. accessories. Todeibmn Eopfx Abvjc

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 3.200 kg, diameter spindel: 6.995 mm, jenis arus masuk: tiga fasa, diameter rol: 210 mm, kecepatan spindel (maks.): 20 rpm, kecepatan spindel (min.): 60 rpm, tinggi total: 1.900 mm, panjang total: 2.700 mm, lebar total: 1.600 mm, lebar rol: 175 mm, tahun perombakan terakhir: 2026, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, Thread rolling machine - thread rolling machine ORT RP18 2-roller Overhauled - new Siemens PLC See video The machine is located in our warehouse in Gussago BS, under power Test run possible Mimu machine tools Thread rolling is a mechanical process without material removal, which can be carried out cold or hot, serving the purpose of improving surface finish (and thus fatigue behavior). Todpevxa Dbsfx Abvoc

Kondisi: baru, Tahun pembuatan: 2025, – Kapasitas M5–M36 Todpfx Abjxtq Shsvjc – Hidrolik – Area kerja 2050 mm – Kepala dapat diputar – Sistem quick-change – Kecepatan ulir dapat diatur tanpa tingkat – Kecepatan balik dapat diatur tanpa tingkat – Indikator kecepatan putar digital – Termasuk 14 insert tap ulir – Meja kerja berat dengan alur-T – Sistem pelumasan manual atau otomatis – Tombol darurat (emergency stop) – Dokumentasi – 400V

Kondisi: baru, Thread diameter M5 - M16 mm Infinitely variable speed 250 rpm Torque 48 Nm Air pressure 6 – 8 bar Working range 150 – 1900 mm Tjdpfx Abjfg U Sisvsc The pneumatically powered D-JSC tapping arm features, among other things, a compressed air motor with quick-change chuck and a robust, flexible working arm. The tapping arm can be mounted directly onto the workbench using the mounting flange and is ready for immediate use. This ensures quick changeover times. The tap can easily be aligned to the desired hole without having to position the workpiece underneath the tapping head. Design with adjustable angle—the quick-change chuck can be tilted, enabling horizontal tapping operations. Pneumatic tapping machines for M5 – M16 threads, adjustable angle. Supplied with 6 quick-change chucks with slip clutch. Optional accessories: - Clamping table with T-slots: 750x600x650 mm or 990x700x800 mm - Magnetic base.

Kondisi: baru, Thread diameter M6 - M22 mm Infinitely variable speed 60/200 rpm Torque 105 Nm Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine features, among other things, a compressed air motor with quick-change chuck and a robust yet flexible working arm. The tapping arm can be mounted directly onto the worktable via the mounting flange and is immediately ready for use, ensuring quick changeover times. Thread taps can be easily brought to the required hole location without needing to position the workpiece underneath the tapping machine. The unit features an adjustable angle design, allowing the quick-change chuck to be tilted so that horizontal tapping is also possible. Todpjfg U Skjfx Abvoc Pneumatic tapping machines for M3 - M12 threads, angle adjustable. Includes 6 quick-change chucks with slip clutch. Optional accessories: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. - Magnetic base.

Kondisi: baru, Thread diameter M10 - M33 mm Infinitely variable speed 35/115 rpm Torque 320 Nm Air pressure 6 - 8 bar Working range 400 - 2000 mm The pneumatically driven D-JSC tapping machine is equipped, among other features, with a pneumatic motor featuring a quick-change chuck and a robust, flexible working arm. The tapping arm can be mounted directly onto the worktable using the mounting flange and is immediately ready for operation, allowing for rapid changeover times. It is possible to bring the tap directly to the desired tapping hole without needing to position the component under the tap. Tsdofg U Sljpfx Abvoc The unit design includes an adjustable angle, allowing the quick-change chuck to be tilted so that horizontal tapping is also possible. Pneumatic tapping machines for M3 - M12 threads, with adjustable angle. 6 quick-change chucks with safety clutch included. Options: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm - Magnetic base.