Beli Mesin bor tembus bekas (73)

Kondisi: sangat baik (bekas), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Lhjdpfxjivawpo Aikel Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 20

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) Ledpfxjgwbbqo Aikehl No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 through-feed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles per drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip removal conveyor belt Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control regulates the movement (X-axis) of the horizontal drilling supports. The CNC control regulates the movement (Y-axis) of the stops. Lsdpoidqf Rjfx Aikohl The CNC controls the movement (X-axis) of the transport belts.

Kondisi: sangat baik (bekas), de2hu-001 Lhjdsyvrrqspfx Aikol

Kondisi: sangat baik (bekas), CNC-controlled flexible automatic throughfeed boring line for milling, drilling, and dowel insertion Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Powered roller conveyor "RBO" with 90° workpiece turning device B) Portal-type CNC-controlled throughfeed boring machine "BIESSE" FTT 800 (for milling and drilling) Zone A: No. 2 electrospindles ISO 30 (each 4.5 kW) with tool magazine, 3 positions each Zone B: 2 provisions for the installation of 2 additional electrospindles 4 upper drilling units (total 128 vertical spindles + 16 horizontal spindles in Y-axis) 2 tool magazines (turret type), each with 60 positions for spindles (2 x 60 = 120 total) C) Interlinking transfer with turnover device (180° face down) "RBO" Ribaltatore Lsdpfx Aioyhqa Ajkjhl D) Portal-type CNC-controlled throughfeed boring machine "BIESSE" FTT 800 R8 (for milling and drilling) 2 horizontal drilling units (1 right + 1 left) with 4 heads, each with 18 spindles (36R+36L), total 72 Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool holder magazine, 3 positions each Zone B: 2 provisions for installation of 2 additional electrospindles 4 upper drilling units (total 128 vertical spindles + 16 horizontal spindles in Y-axis) 2 tool magazines (turret type), each with 60 positions for spindles (2 x 60 = 120 total) E) "BIESSE" RD dowel driving unit 2 horizontal boring units (1 right + 1 left), each with 5 insertion nozzles (5LH + 5RH), total 10 nozzles F) Dust extraction and cleaning unit "WANDRES"

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Lhsdeh Ryhnopfx Aikol Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: sangat baik (bekas), Electronic control RT 483 No. 2 pass-through motorized conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit per horizontal drilling support (1 x 1.5 HP) No. 20 spindles per horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles per drilling unit of upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 augers (continuous) for chip extraction Digital display of position data (axis) Lhedpfefz Nansx Aikjl Total connected load (kW): 35.1 CNC control of the movement (X-axis) of horizontal drilling supports CNC control of the movement (Y-axis) of the stops

Kondisi: sangat baik (bekas), PC control type NC 400 (software) Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per unit of upper drilling support (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous (endless) screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 Lsdpogk T Ttefx Aikohl The CNC control monitors the movement (X-axis) of the horizontal drilling supports The CNC control monitors the movement (Y-axis) of the stops

Kondisi: belum diuji (bekas), Tahun pembuatan: 2009, Fungsionalitas: belum diuji, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 700 mm, jumlah spindel: 40, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Number of injectors: 2 Number of storage units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included Lsdpfx Aisyq Irhekjhl The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6106

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 700 mm, kecepatan rotasi (maks.): 2.800 rpm, RINCIAN TEKNIS Panjang panel minimal: 170 mm Lhsdpfxsxw U Aro Aikjl Panjang panel maksimal: 2.500 mm Lebar panel minimal: 50 mm Lebar panel maksimal: 700 mm Posisi kepala bor: NC Spindel untuk pengeboran vertikal: 40 Spindel untuk pengeboran horizontal arah "Y": 6 Daya motor: 3 kW Putaran max.: 2.800 rpm Spindel untuk pengeboran vertikal: 4+4 Daya motor: 2,2 kW Putaran max.: 2.780 rpm DETAIL MESIN Jumlah injektor: 2 Jumlah tangki penampung: 2 PERLENGKAPAN Sistem kontrol: WINDOWS Dowel kayu Ø8 Catatan: Perkakas tidak termasuk dalam penawaran.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, kecepatan pemakanan sumbu X: 95 m/menit, tinggi pelat: 60 mm, panjang pelat: 900 mm, lebar pelat: 3.000 mm, kapasitas produksi: 1.500 unit/jam, RINCIAN TEKNIS Lebar papan minimum: 250 mm Lebar papan maksimum: 3.000 mm Lhjdjyzn Sdopfx Aikjl Panjang papan minimum: 100 mm Panjang papan maksimum: 900 mm Ketebalan papan minimum: 12 mm Ketebalan papan maksimum: 60 mm Berat maksimum per papan: 50 kg Tinggi kerja: 1.060 mm Kecepatan konveyor papan dengan inverter: 20 - 95 m/menit Kecepatan untuk papan di atas 50 kg: 50 m/menit RINCIAN MESIN Model kontrol: TPA - Albatros - CNC 2000 PERLENGKAPAN Perangkat lunak EASYTOOL 5 kepala bor vertikal bawah terpisah, otomatis fleksibel dengan kontrol NC, masing-masing dengan 26 spindle independen 2 kepala bor horizontal dengan kepala terpisah, 28 + 28 spindle (masing-masing per sisi), diposisikan secara independen pada dua level Referensi eksternal: MMA004.003

Kondisi: sangat baik (bekas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each equipped with 2 drilling heads, each with 1.8 kW motor and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction Numerical control system (software module Tooling System) for both machines. Lhodpfx Aievnq Txskol W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – for gluing and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 2.800 mm, panjang umpan sumbu Y: 1.000 mm, panjang umpan sumbu Z: 50 mm, kecepatan pemakanan sumbu X: 140 m/menit, laju pemakanan gandar Y: 90 m/menit, laju pemakanan sumbu Z: 50 m/menit, panjang benda kerja (maks.): 2.800 mm, lebar benda kerja (maks.): 1.000 mm, jenis kontrol: Kontrol CNC, Pusat bor CNC berperforma tinggi KDT KD-610NHZ untuk pemrosesan enam sisi benda kerja. Tersedia segera dari stok. Unit bor atas dan bawah. Pemrosesan presisi dan kecepatan tinggi. Ideal untuk produksi furnitur rangka. Mesin dapat dilihat setelah perjanjian. Lodpfxjymz Als Aikshl

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 50 kg, kecepatan pemakanan sumbu X: 95 m/menit, tinggi pelat: 60 mm, panjang pelat: 900 mm, lebar pelat: 3.000 mm, 1 Lhedoyzn D Tspfx Aikjl

Kondisi: sangat baik (bekas), en-001 Lhodpfx Aiedg Itnokol

Kondisi: diremajakan ulang (bekas), PC control: Power Control Professional type Software: woodWOP / TopDrill BST Lhjdpjdz Uk Tjfx Aikel No. 2 through-feed motorized conveyor belts (4 x kW?) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units per lower vertical drilling support (2 x 1.5 kW) Various spindles for each lower drilling support unit No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units per upper vertical drilling support (2 x 1.5 kW) Various spindles for each upper drilling support unit No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Kondisi: sangat baik (bekas), PC control, type NC 400 (with software for managing work cycles) No. 2 motorized throughfeed conveyor belts Max. working width (mm): 3200 - Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit: 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit for upper drilling supports No. 2 upper vertical workpiece clamps No. 2 screws (endless) for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops OPTION: Front loader (for narrow parts: Min 60 mm - Max 260 mm) Lodpfxji D D Tfj Aikehl

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° Lhjdpfx Asdfgg Isiksl C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Kondisi: baru, Tahun pembuatan: 2018, maggi-boring-evolution-2018-sale Lhodsy U Er Uepfx Aiksl

Kondisi: sangat baik (bekas), CNC-controlled Throughfeed Boring and Dowel Inserting Line (3 machines) J06031) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps + No. 2 endless screws for chip removal J06032) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps - No. 2 endless screws for chip removal J06033) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC Lhedpfx Ajg Urn Esikol - No. 4 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 4 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control (Software: Tooling System + Woodmaster) CNC controls movement (X-axis and Hv) of the 2 horizontal boring units CNC controls movement (X-axis) of vertical boring units CNC controls movement (Y1 and Y2 axes) of drilling units + (Y-axis) of stops CNC controls movement (X-axis) of workpiece clamps CNC controls movement (X-axis) of conveyor belts

Kondisi: baru, Mesin Pengeboran Enam Sisi Merek: Quick Tipe: KQ-62Lite Mesin Baru Spesifikasi Teknis: - Panjang benda kerja: 70 - 2.400 mm - Ketebalan benda kerja: 9 - 60 mm - Lebar benda kerja: 30 - 1.220 mm - Ukuran pemrosesan minimum: 50 x 70 mm Lhodpfozvgndjx Aiksl - Kecepatan perpindahan dalam sumbu X: 138 m/menit - Kecepatan perpindahan dalam sumbu Y: 90 m/menit - Kecepatan perpindahan dalam sumbu Z: 28 m/menit - Pengendali mesin: Higerman - Tinggi kerja: 890 mm - Spindel frais: 2 x 3,5 kW, 18.000 RPM, penggantian alat manual - Unit pengeboran: Atas 9 vertikal dan 4 horizontal / Bawah 7 vertikal - Akurasi pemosisian: 0,03/1000 - Akurasi pengulangan: 0,02/1000 - Konsumsi daya: 25,8 kW Opsional - Mesin termasuk sistem pengembalian benda kerja Konfigurasi lain tersedia berdasarkan permintaan.

Kondisi: baru, Mesin Bor 6 Sisi Merek: Quick Tipe: KQ-63E Mesin Baru Data Teknis: - Panjang benda kerja: 70 - 2800 mm - Lebar benda kerja: 50 - 1220 mm - Ketebalan benda kerja: 9 - 60 mm - Benda kerja minimum yang dapat dikerjakan: 70 x 50 mm - Kecepatan perpindahan dalam sumbu X: 135 m/menit - Kecepatan perpindahan dalam sumbu Y: 90 m/menit Lhodpezvgn Defx Aikol - Kecepatan perpindahan dalam sumbu Z: 25 m/menit - Spindel yang dapat dikontrol secara terpisah: Atas 2 x 12 vertikal, 4 horizontal / Bawah 1 x 7 vertikal - Pengontrol mesin: Higerman (Bahasa Jerman) - Spindel frais atas: 9 kW 24000 RPM - Pengubah alat atas: 5 posisi - Spindel frais bawah: 3,5 kW 18000 RPM - Motor: Motor servo tanpa sikat - Akurasi pemosisian: 0,03/1000 - Akurasi pengulangan: 0,02/1000 Opsional: - Mesin dengan sistem pengembalian benda kerja Cari dengan cepat Tawarkan mesin Daftar ke buletin Berhenti berlangganan buletin Hubungi kami Ikhtisar

Kondisi: baru, Tahun pembuatan: 2024, Boring and inserting machines Rilesa Vlg 2200, new - March 2024 Make: Rilesa Model: Vlg 2200 Description: Lhodpfxsgbpmhe Aikel Condition: new Year: 2023 Start type: to be agreed Shipping costs: Customer Protection Delivery terms: COLLECTION BY CUSTOMER Category: Machine tool accessories in Poland Subcategory: Drill bits Subcategory 2: Drilling machines Description: DRILLING MACHINE WITH MAGAZINE FOR 8 DRILL UNITS, TWO FRONT (RIGHT AND LEFT), 3 UPPER, AND 3 REAR Year: 2024 The machine can be equipped with additional drilling heads. We are also a manufacturer of heads in various spindle centre distances and with various numbers of drilling spindles, according to individual customer requirements.