Beli Berg Und Schmid bekas (129)

Kondisi: baik (bekas), Tahun pembuatan: 2011, From business closure: Berg und Schmid VKS 370 HA Year of manufacture: 2011 Semi-automatic Gsdpswa Ecqjfx Aabeua 4-meter roller conveyors on left and right Left-hand stop with digital length measuring system, adjustable via handwheel Cutting capacity with 370 mm saw blade: Round: 120 mm – Square: 100 mm – Rectangular: 180 x 100 mm at 90° At 60°: Round: 110 mm – Square: 90 mm – Rectangular: 90 x 100 mm Mitre cuts: left up to 60°, right up to 45° Saw blade bore: 40 mm Saw blade speed: 15–70 rpm 380 Volt Coolant pump Semi-automatic operation sequence: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material or begin cutting immediately in series operation 4. Band off 5. Raise frame just above material 6. Release vice

Kondisi: bekas, translation_hu_001 Guodpox Rh D Sjfx Aabsa

Kondisi: baik (bekas), Mesin Pemotong Ulir Berg + Schmid Delta 4 Deskripsi Produk Rentang pemotongan: R 1/3 - 4", M8-M52 Motor kondensator yang kuat, 230V, 1 kW, sangat tenang saat beroperasi 3 kecepatan: 15+27+58 rpm (juga di bawah beban penuh, transmisi bawaan) Dengan 2 kepala pemotong ulir otomatis: R 1/2 -2", R 2 1/2 - 4" Lengkap dengan rahang pemotong: R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", kerucut DIN 2999 Pendinginan otomatis langsung melalui kepala pemotong Chuck pelepas cepat, pemotong pipa, reamer dalam pipa Termasuk perangkat keselamatan kerja dengan sakelar kaki keamanan serta 4 kaki penyangga. Gjdpfsyy S Efjx Aaboua

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, 1 Guodpfxjyy A Hys Aabsa

Kondisi: baru, Round cutting diameter: 300 mm Square cutting diameter: 300 mm Flat cutting diameter: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 – 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Unused ex-display machine!!!! 2-column high-performance automatic band saws of the SBS series • Modern SNC 20 control unit (CNC version) • Frequency-controlled saw drive Godpfsxfwbtox Aabjua • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation • Double clamping vise (before and after the blade) • Creep mode for positioning • Bundle clamping prepped for electric and hydraulic operation • Chip conveyor The SNC 20 control unit allows convenient and straightforward input of up to 20 different sawing tasks (length and quantity). When the desired dimension is entered, the control automatically calculates the saw kerf and the number of feed strokes. In addition, the error code display system enables rapid troubleshooting and diagnosis. Including band run-off detection (EUR 1,800)

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table Guodpfx Aajd Iipxebsa - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length: 3375x27x0.9 mm Band speed: 18 - 100 m/min Table height: 940 mm Total power requirement: 1.5 kW Machine weight: approx. 0.65 t Space requirement: approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, semi-automatic hydraulic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table Gujdpfofgyiaox Aabja - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.42 t Double-mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system Guedpfefgyh Tsx Aaboa

Kondisi: baru, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Space required: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTION PRICE!!! (20347) Double mitre metal bandsaw with: - Blade speed 25 - 90 m/min Gsdpfx Aaefgyh Rsbsua - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for quick mitre adjustment - Movable quick-release vice - Quick release lever - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Guodjd Iip Nspfx Aabja Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Total connected load: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal band saw featuring: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table for quick mitre adjustment - Quick-release vice, movable - Quick-action clamping lever - Automatic coolant system

Kondisi: baru, Cutting diameter, round: 300 mm Cutting diameter, square: 300 mm Cutting diameter, flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series impresses with advanced technology, high quality, durability, and uniquely comprehensive standard equipment. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Operator buttons with pictograms • Work light • Powered chip removal brush • Hydraulic blade tension • Adjustable clamping pressure • Double vise (before and after the blade) Gujdefb Nbfspfx Aaboa • Creep speed for positioning • Electrical and hydraulic bundle clamping prepped • Chip conveyor The SNC 20 controller allows for convenient and easy programming of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the controller automatically calculates the kerf and the number of feed strokes. Additionally, the error code display system allows for rapid troubleshooting and fault analysis.

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double-mitre metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter Gusdpjfgyh Sefx Aaboa - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Mitre cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy mitre adjustment - Quick-release vice, movable - Quick-action lever - Automatic coolant system

Kondisi: baru, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw blade dimensions 3375 x 27 x 0.9 mm Blade speed 18 - 110 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Vice laterally adjustable Gjdponq Sanjfx Aabsua - Solid, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, en-GB Gsdjd Iipmspfx Aabjua

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: Gujdpfx Aasfgyicsboa * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting diameter, round: 330 mm Cutting diameter, square: 330 mm Cutting capacity, flat: 400 x 330 mm Saw blade length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 – 100 m/min Total required power: 3.7 kW Machine weight approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance band saw machines of the SBS series The SBS series impresses with advanced technology, high quality, durability, and an unmatched comprehensive standard equipment package. • Modern SNC 20 control system (for CNC versions) • Frequency-controlled saw drive • Control buttons with pictograms • Work lamp • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the blade) • Creep speed for positioning • Bundle clamping prepared for electric and hydraulic actuation Godpfx Asfb Nbgoabjua • Chip conveyor The SNC 20 control makes it easy and convenient to enter up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the trimming allowance and the number of feed strokes. Furthermore, the error code display system enables rapid troubleshooting.

Kondisi: baru, en Godpfx Aefg E Hvoabeua

Kondisi: baru, Cutting range at 90 degrees: round 510 mm Cutting range at 90 degrees: square 480 mm Cutting range at 90 degrees: rectangular 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight: approx. 2.3 t Space requirement: approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed and automatic length compensation Sensor on the saw blade for automatic adjustment of the sawing stroke Guedpfx Aofu Nbbsabsa Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vice opens on both sides Minimum rest piece length: 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities Automatic feed unit 500 mm via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm Fully hydraulic control of saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire work process with simple data entry

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre bandsaw K-tech DG 50/33 HA-I • 2-column mitre bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start recognition) • Smooth operation due to inclined cut, feed regulator and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (can be sanitized) • Energy-saving and low-vibration thanks to inclined cut • Ergonomic, safe, and free-standing control panel • Frequency-controlled sawing drive, 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimension drive wheels (520 mm) each • Clear mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Switch saw on Guedpfx Aajfg E Hlebsa 3. Rapid descent to start of material or commence cut immediately for serial cuts 4. Switch off saw band 5. Raise frame slightly above material 6. Open vice

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Gusdpfxofd Abao Aabja Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total connected load: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, frequency-controlled hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single unit, ensures extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Robust vice and machine frame, heavy-duty cast construction • Large machine base • Integrated tool compartment and chip drawer in machine substructure • Cutting monitoring via ammeter • Adjustable feed regulator for cutting pressure • Infeed roller • Ball bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or cut straight away for series cutting 4. Switch off saw band Godpfxofn Andj Aaboua 5. Raise frame to just above material 6. Open vice

Kondisi: baru, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 – 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.45 t Space requirement approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for fast cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid material. Material clamping is carried out vertically on the feed and discharge sides. From the K-tech 800 H, the machine is equipped as standard with an additional horizontal vise. Hydraulic saw frame lowering, material positioning, and the pusher system are CNC-controlled in coordination. The machines are equipped as standard with the environmentally friendly "B&S Clean Cut cutting system" with minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC controller enables programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. The B&S pusher system, feeding and positioning system, is equipped with "double-sided opening gripper jaws" Godpfx Ajfgyifeabeua which are hydraulically operated. This ensures secure gripping and handling of materials and bundles that deviate slightly from the ideal shape. The pusher system is built separately and runs on ball-bearing linear guides, ground rack, and is powered by a frequency-driven, robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Saw blade dimensions: 8140 x 54 x 1.6 mm Blade speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space requirements: approx. 5.7 x 4.0 x 2.75 m 2-column band saw for fast cutting, K-tech 1200H with pusher system P 30. P 60 (option) Gjdpfxsfgyigj Aabsua Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. Starting with the K-tech 800 H, the machine comes standard with an additional horizontal vice. The interplay of the hydraulic saw frame downfeed, material positioning, and the pusher system is CNC controlled. The machines are equipped as standard with the environmentally friendly "B&S-Clean Cut Cutting System" with minimum quantity lubrication. This reduces cleaning time and conserves resources. CNC control A CNC controller allows programming of up to 90 cutting programs with different section lengths, quantities, and mitre cuts. The B&S pusher system, feed and positioning system, features "double-sided opening grippers" which are hydraulically operated. This ensures secure gripping and transportation of materials and bundles that may deviate slightly from the ideal shape. The pusher system is built separately and is guided by ball-bearing linear guides, ground rack, and frequency-driven robust gear motor.

Kondisi: baru, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 – 110 m/min Control: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space requirements: approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 255 Super VA-I CNC • Left mitre 45°, automatic operation • Left mitre 60°, semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single piece, very quiet and low-vibration cutting • Removable chip tray (for cleaning) Guedsd Iipzjpfx Aabja • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance CNC positioning with incremental encoder • Easy top access to saw, material, and feed unit • Folding safety cover • Fine adjustment for feed rate • Semi-automatic cutting • CNC control for optimizing work processes: input options for various parameters such as quantities and material lengths, automatic calculation of kerf width • CNC control for 10 different sawing programs, each with up to 99 subprograms for different lengths and quantities—e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) with ball screw, incremental feed, and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm; minimum remnant piece length 170 mm.

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Gjdpfxjfg E Hms Aabsua Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double miter bandsaw for fast cutting with pusher system P15, option P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system". An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake with large radial center positioning. The work table is mounted on high-quality preloaded bearings which ensure very smooth rotation. CNC control A CNC control system allows programming of up to 90 cutting programs with different cut lengths, quantities, and miters. Double-sided clamping positioning system The B&S pusher system, feeding and positioning unit, features "double-sided opening grippers" which are hydraulically operated. This guarantees secure gripping and transporting of materials and bundles that may deviate from the ideal shape. The pusher system is built as a separate unit and runs on ball-bearing linear guides, a ground rack, and is powered by a frequency-controlled, robust geared motor.