Beli Mesin bubut kayu & mesin bubut bekas (110)

Kondisi: sangat baik (bekas), 6901 Bsdpfeyy Ngmex Ad Rjwk

Kondisi: bekas, NOMOR KATALOG 7650 Data teknis: - panjang kerja maks: 1500 mm - diameter kerja maks: 250 mm Bedeyyyt Rspfx Ad Rswk - penggilingan (frais cakram): 7,5 kW - spindel – 2800 rpm 3 kW - kecepatan putar spindel: 700/1200/1500/2000 rpm - unit penggerinda: 0,75 kW - motor hidrolik: 3 kW - daya total: 17,75 kW - kebutuhan udara: 6-8 bar - feeder untuk balok hingga 150x150 mm - diameter pipa hisap: 100 mm, 160 mm - dimensi pengiriman panjang/lebar/tinggi: 4350x2300x1980 mm - berat sekitar 3000 kg KEUNGGULAN – produksi Jerman – copy lathe hidraulik otomatis – dokumentasi teknis asli DTR – belum dicat ulang – mesin bubut bekas, kondisi sangat baik Harga net: 69.900 PLN Harga net: 16.640 EUR Harga net dihitung dengan kurs 4,2 PLN/EUR (jika terjadi fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Otomat bubut Locatelli MK-CC 1200 Panjang pembubutan: 1200 mm Pemuat otomatis balok dari feeder 3 pisau Duplomatic mengambang mengikuti pola 3 pisau atas mendekat Kemampuan pengeboran ujung pada material Bwjdpfx Adeyxwpye Rok Kontrol mesin dimodernisasi pada tahun 2023

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin bubut otomatis Genini TBK 70 Penampang keluar 45×140 mm (sekitar 10 pcs/menit – 600 pcs/jam, dengan 2 alat pembubutan kasar – 1 alat finishing) Maks blok yang dapat dikerjakan: 70×70 mm Bwjdpoyxqc Hofx Ad Rok Min blok yang dapat dikerjakan: 20×20 mm Maks panjang yang dapat dikerjakan: 300 mm Min panjang kerja: 25 mm Tanda CE

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, The undersigned, DDG INSOLVENCY I.P.U.R.L., headquartered in Cluj-Napoca, 115 Septimiu Albini Street, Cluj County, VAT no. RO27987796, registration no.: 2A0522, through the insolvency practitioner Godorogea Daniel-Lucian, in his capacity as judicial liquidator of ELEMENTO MOBILI S.R.L. – in bankruptcy, with registered office in Dej, 6 Dumbrava Roșie Street, ground floor, apt. 1, Cluj County, registered in the Trade Register attached to the Cluj Tribunal under no. J12/2389/2016, unique registration code 36225390, appointed by Civil Court Decision no. 1278 dated 03.07.2025 issued by the Cluj Specialized Tribunal in case no. 442/1285/2025, is organizing a public auction, by outcry, with upward price bidding, for the sale of the asset identified in this announcement. The first auction will take place on 08.04.2026 at 15:00, at the DDG Insolvency I.P.U.R.L. office in Cluj-Napoca, 115 Septimiu Albini Street, Cluj County. If not awarded, the auction will be repeated on 15.04.2026, 22.04.2026, 29.04.2026, 06.05.2026, and 13.05.2026, under the same conditions and at the same time. To inspect the assets, the judicial liquidator will arrange a viewing day on 06.04.2026 between 09:00 and 12:00. Those interested in viewing are invited to contact the judicial liquidator at 0763 478 619 and express their intent to participate before the scheduled date. During the course of auction sessions, the judicial liquidator may organize additional viewing days, which will be announced to interested parties. In case of a successful bid, the judicial liquidator will issue a tax invoice for the value of the awarded assets. The conversion of the price into RON will be made on the invoice issuance date, using the exchange rate set by the National Bank of Romania for that date. Bjdpsyfhccsfx Ad Rjwk The bidding increment is 5% of the starting price. The auction terms and conditions (tender dossier) for participation will be prepared by the judicial liquidator in accordance with standard practice and will include the auction participation regulations. The dossier will be sold by the insolvency practitioner at the price of 500 lei + VAT for assets up to 5,000 euros and 1,000 lei + VAT for assets over 5,000 euros. It can be obtained from the liquidator's office or by phone, in which case it will be sent to the participant via email. The participation guarantee for the auction is 10% of the starting price. This, together with the registration documents, must be submitted at least 24 hours before the auction date at the liquidator’s office. The participation guarantee will be deducted from the price of the assets for which the participant is declared the winner and will be refunded to those who are not declared winners. In the event of equal bids, the winner will be the person who undertakes to pay the full price in the shortest time. The payment term for the price is 5 working days from the award. If the remaining amount is not paid, the winning bidder will forfeit the deposit paid as a guarantee and will not be able to participate in the following auctions.

Kondisi: bekas, Tahun pembuatan: 2022, en2hu-it-pl-nl-lt-lv-nb Bwodpfx Ajyvtqusd Rek

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.190 kg, tegangan masuk: 380 V, jenis arus masuk: tiga fasa, kecepatan spindel (min.): 2.500 rpm, kecepatan spindel (maks.): 3.600 rpm, kecepatan rotasi (maks.): 3.600 rpm, kecepatan rotasi (min.): 2.500 rpm, frekuensi input: 50 Hz, locatelli-ariete-3-translation Bwjdpfeyxw D Dex Ad Rek

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, For sale is a high-quality MIDI PRO benchtop wood lathe in demonstration condition with minimal signs of use. The machine has been used only occasionally and is both technically and visually in very good condition. This compact yet extremely robust benchtop lathe is perfect for turning bowls, boxes, small vases, and performing precise woodturning tasks. Thanks to its swiveling and sliding headstock, it offers highly versatile usage options and ergonomic operation. Ideal for ambitious hobby turners as well as professional users seeking a powerful and space-saving lathe. Technical Specifications: - Center height: approx. 178 mm (swing diameter approx. 355 mm over bed) - Distance between centers: approx. 450 mm (extendable) - Speed ranges: 60–1000 / 150–1900 / 350–3700 RPM - Motor: 1 HP / 0.7 kW – 230 V - Spindle thread: M33 x 3.5 (MT2) - Tailstock: MT2 with 100 mm quill travel - Forward and reverse operation - Sturdy construction, machine weight approx. 67 kg Condition: - Demonstration machine - Hardly any signs of use - Technically flawless Advantages: - Very compact, sturdy benchtop lathe - Ideal for precise turning work - Versatile due to swiveling headstock - Perfect for hobby and professional workshops The machine is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Bodpfx Aeyuubqsd Rewk Related terms: wood lathe, turning machine, lathe, woodturning lathe, woodturning, turning tools, wood spinning, turning, machinery.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, B18OO Bwedpfxjyucw Tj Ad Rsk

Kondisi: baik (bekas), Tahun pembuatan: 2020, B18OO1572-en Bodpfxjyucuxj Ad Rowk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, de-to-en-truckscout-machineseeker Bedpfx Aeyucqted Rowk

Kondisi: bekas, OMA 600 Mesin bubut kayu otomatis, dengan pengumpan Dimensi keseluruhan: 170 x 110 x 190 cm Berat perkiraan: 1500 kg Bsdpfxerfh D Io Ad Rswk

Kondisi: bekas, OMA \ 60 \ A Mesin bubut kayu otomatis dengan pemuat, panjang maksimum benda kerja 600 mm. Dimensi mesin: 240 x 140 x 175 cm. Berat perkiraan: 2200 kg. Bwsdoyhghvopfx Ad Rjk

Kondisi: bekas, Tahun pembuatan: 1998, nomor mesin/kendaraan: MR006948, The Intorex CX-1900 is a fully automatic copy-turning lathe manufactured by the reputable Spanish company Intorex. This machine is perfectly suited for the serial production of stair railings, furniture legs, balusters, and other turned wooden components. The Intorex CX-1900 features three controlled copy units. The machining unit travels on hardened and ground linear ball bearing guides, ensuring precise and stable operation. Various settings can be stored, modified, and recalled via the PLC control system. The automatic magazine feed processes square stock up to 140×140 mm; in semi-automatic mode, round workpieces with a diameter of up to 240 mm can be turned. With a maximum workpiece length of 1,900 mm, this machine is ideal for the series production of stair railings, furniture legs, balusters, and other turned wood products. Bsdpsyvrc Asfx Ad Rowk Technical specifications: - Distance between centres: 1,900 mm - Maximum workpiece height: 240 mm - Milling spindle speed: 900 - 5,200 rpm - Motor power: 12 HP - Serial number: 105104

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10071775, tinggi pusat: 150 mm, berat keseluruhan: 100 kg, kecepatan rotasi (maks.): 3.300 rpm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Setiap penawaran mengikat untuk pengambilan tepat waktu, baik antara 11.05.2026 dan 13.05.2026 atau antara 18.05.2026 dan 21.05.2026! DETAIL TEKNIS Kecepatan putar: dari 400 hingga 3.300 rpm Jarak antara senter: sekitar 400 mm Tinggi senter: sekitar 150 mm DETAIL MESIN Tegangan kerja: 230 V Frekuensi: 50 Hz Arus nominal: 2,5 A Daya terhubung: 0,56 kW Dimensi & Berat Dimensi (P x L x T): 850 x 300 x 440 mm Berat: 100 kg Referensi eksternal: Bengkel pelatihan – Lot 3 Bsdsyn Hz Nspfx Ad Rswk

Kondisi: sangat baik (bekas), Genini Miniautomat Through-Feed Lathe Square Timber Turning Automatic Machine Main spindle equipped with a two-speed motor, output: 4.9/5.9 kW Hydraulic pump motor: 1.5 kW Maximum workpiece length (square timber): 950 mm Maximum turning length: 120 mm Maximum turning diameter: 80 mm Two supports with profiling knives 1 face spindle for drilling or face profiling 1 rough turning knife Bwodpfx Adsv Hgcte Rsk Machine weight: approx. 1800 kg

Kondisi: baru, Tahun pembuatan: 2025, lathe-vd1100n Bodpfx Adev A Hwie Rjwk

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 370 mm, Device for copying original parts or according to a template Infinitely variable spindle speed adjustment ensures optimal adaptation to the workpiece High spindle rotation precision Robust cast iron construction ensures vibration-free operation High-quality belt drive ensures optimal power transmission to the spindle Quick-lock lever allows easy locking of the tailstock on the bed Digital speed display included in the scope of delivery Technical specifications Centre distance: 1100 mm Turning diameter over bed: 370 mm Turning diameter during copying*: 160 mm Spindle speed min.: 500 rpm Spindle speed max.: 2000 rpm Speed settings: infinitely variable Spindle thread: M33 x 3.5 Tailstock taper: MK 2 Tailstock quill stroke: 50 mm Copy length: 850 mm Bwsdpfeytc R Rox Ad Rjk Motor power: 1.1 kW Motor power S1 100%: 0.75 kW Voltage: 400 V Dimensions (W): 1650 mm Dimensions (D): 750 mm Dimensions (H): 1150 mm Weight approx.: 92 kg Scope of delivery Tool rest 300 mm Face plate 150 mm Rotating centre Drive dog Copying device Basic tools Stand

Kondisi: bekas, translation_de_target Bedpfx Adsymf E De Rswk

Kondisi: baru, Tahun pembuatan: 2026, Travel range - z 1200 mm Travel range - x 360 mm Weight 3250 kg NESTO HDM-4 PRO 4-Axis PRO CNC Wood Turning Lathe TECHNICAL DATA: - Workpiece dimensions: max. diameter 360 mm - max. length 1200 mm - Control system: TPA (Italian) - Z-Axis travel: 1200 mm - X-Axis travel: 360 mm - Longitudinal axis speed (Z): 70 m/min - Cross axis speed (X): 30 m/min - Vertical axis speed (Y): 20 m/min - Lathe spindle speed: 4,500 rpm (direct drive) - Connected load: 20 kW - Lubrication unit: ILC automatic lubrication Bodpfoyk Ia Ssx Ad Rswk - Workpiece clamping: Pneumatic cylinder (7 bar) - Workpiece length adjustment: Easy adjustment via remote control (keyless, screwless) - Cutting knives: Hardened triangular knife made from special steel - Cutting knives: Hardened round knife made from special steel - Cutting knives: Debarking blade - Spindle motor ATC (automatic tool changer) 24,000 rpm spindle (5-position tool changer) - Drawing program: Italian CAD-CAM program, specifically customized for our machine (Pegasus 4-axis CAD-CAM program) - Machine dimensions: Length: 3,870 mm * Width: 2,450 mm * Height: 2,150 mm - Weight: 3,250 kg GENERAL SPECIFICATIONS Our machine is equipped with high-resolution Japanese Panasonic servo motors. The axis that rotates the workpiece features a direct drive system and can be powered by a 5 kW servo motor at 4,500 rpm. Precision ball screws and nuts are used on all axes. Workpiece length can be adjusted with a single rotary knob. This ensures time savings and long-term linearity for the tailstocks. The control system features remote control functionality. Additionally, the TPA controller offers a high level of user convenience with functions such as job sequencing, detailed reporting, and a 3D visualization of the workpiece status. Chassis Construction The reinforced, vibration-free, and stable chassis ensures lasting precision during extended production cycles and remains reliable for your machining needs. The striking frame design ensures operational precision and reliability. Axis Movements All axes are driven by servo motors, providing precise acceleration at high speed. High-quality, high-precision rails, carriages, and racks ensure that axis movement is not impaired even by the smallest vibrations. Central Automatic Lubrication Unit Automatic Tool Measuring Unit This unit automatically measures the length of the milling cutter at the end of the spindle motor and mills at the correct dimensions in the Z-axis. This information can be stored in the control system, eliminating the need to manually enter cutter dimensions when changing tools. TPA Control Unit The TPA control unit features an industry-standard Windows-based PC. These industrial PCs guarantee trouble-free operation under the toughest conditions. Main features of the TPA control: - EtherCAT communication system - Detailed reporting functions - User-friendly, custom-developed interface - Integrated Wi-Fi for remote access via the internet, allowing you to receive immediate support from our service team. CAD/CAM SOFTWARE / PEGASUS CAD & CAM CAD/CAM Software / Pegasus CAD & ...

Kondisi: seperti baru (mesin pameran), EX-DEMONSTRATION MACHINE Bsdjyk Dtzepfx Ad Rswk For sale is an as-new Teknatool Nova Neptune 190 DVR wood lathe with a centre distance of 457 mm. The exhibition machine is in original condition, so you benefit from the full warranty. Technical Data - Centre height approx. 190 mm - Centre distance max. 457 mm (optionally extendable!) - Spindle thread M33 x 3.5 with ASR (Euro) run-out safety groove* - Spindle and tailstock taper MK2 - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-position indexing system via display - Motor 1.5 HP (230 V), forward and reverse operation - Tailstock quill travel 100 mm (with scale and handwheel featuring a bearing-mounted crank) - 4-prong drive centre, revolving centre and double-cone MK2 - Tool rest (hand rest upper section) approx. 230 mm (with 25.4 mm post) - Faceplate 80 mm with ASR (Euro) run-out safety groove* - Machine weight assembled approx. 60 kg The machine can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: € 70.00 incl. VAT Germany: € 80.00 incl. VAT South Tyrol: € 100.00 incl. VAT Related terms: wood lathe, metal lathe, turning bench, lathe bench, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, For sale is a used Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The used machine is in good condition. Technical specifications: - Center height: 280 mm - Swing over bed: 550 mm (up to 1,000 mm with optional extension bed/outboard turning device!) - Distance between centers: approx. 780 mm (extendable!) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock with MK2 taper - Variable frequency drive (3 belt stages): - Stage 1: 60 – 1,200 rpm - Stage 2: 100 – 2,200 rpm - Stage 3: 150 – 3,700 rpm - Tailstock quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick change system (for ER25 boring quill) Bwjdpfeyi E Rlox Ad Rjk - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Related terms: woodturning lathe, lathe, turning machine, woodturning, woodturning tools, woodturning equipment, machinery Reference: B18OO

Kondisi: bekas, Tahun pembuatan: 1998, 1 Bwedpfx Adeyqvw Ee Rok

Kondisi: bekas, Tahun pembuatan: 1990, de-hu-001 Bsdpfx Adjyqva Hj Rjwk

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2001, Mesin bubut kayu CNC yang mampu mengerjakan 3 elemen sekaligus Tanpa panel kendali Panel kontrol tanpa komputer, perlu mempertimbangkan daya tarik penawaran tanpa kontrol. Kemungkinan pembuatan sistem kontrol untuk pelanggan dengan biaya tambahan. Spesifikasi teknis: Panjang kerja maksimum: 1200 mm Maksimum dimensi kotak: 100×100 mm 3 elemen dikerjakan secara bersamaan Template terprogram Bwedof Ezgqjpfx Ad Rsk Kontrol Fagor Dirancang untuk produktivitas tinggi.