Beli Abc-Group Tempat Penyemprotan 7.2X5.2M bekas (6.218)

Kondisi: baru, Tahun pembuatan: 2026, • External dimensions: 7,200 x 5,200 x 3,800 mm • Internal dimensions: 7,100 x 5,100 x 3,100 mm • Entrance gate: 4,000 x 3,100 mm (four-winged) • Service door: 640 x 1,800 mm • Structure: Stainless steel • Heat exchanger: Stainless steel • Panels: filled with mineral wool • Total power: 21 kW • Seating: inside/outside (following prior roofing of the cabin by the customer at their own expense) • Floor: fully ribbed • Air supply system: Jet turbine 5.5 kW – 2 units • Exhaust system: Jet turbine 7.5 kW – 1 unit • Ceiling lights: LED fluorescent panels, 32 pcs • Side lighting: LED panel 120 x 30 cm – 12 pcs Klodpfxem Tv I Ao Ah Tou Output: 48 W, single-piece, 1000 lumen • Riello RG5S burner, 160–310 kW • The cabin is available in various colors

Kondisi: baru, Tahun pembuatan: 2026, The illustrative photos show completed installations of the 4x7 spray booth for customers. The offer applies only to the spray booth without preparation area (Option to purchase a preparation zone on request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (triple-winged) - Service door: 640x1800 mm - Structure: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool filled - Total power: 16 kW - Fully grated floor - Air supply system: nozzle turbine 4.0 kW - 2 units - Exhaust system: electric turbine 5.5 kW – 1 unit - Ceiling lights: cassettes with LED fluorescent lamps, 32 pcs. - Side lights: LED panel 120x30 cm – 8 units. Output: 48 W – each Kljdpfx Aher Ha Ehs Tou 1000 lumens - Burner Riello 40 G20 95–213 kW - The booth is available in various colors

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-leaf, 1700 × 2300 mm (W × H) - Wall panels: 100 mm thick, 950 mm wide, tongue-and-groove structure; 0.5 mm steel sheet with mineral wool insulation - Box: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, 1 set in total Klodpfxexna U Uo Ah Tou - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, time setting, fault indicator, emergency stop switch, operating hour counter, temperature limit controller, total operating time display - Total power: 6 kW - Overhead conveying system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We offer complete systems including transport carriers, spray booths, and powder coating guns – see visualizations in the photos.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.850 mm, panjang total: 12.125 mm, lebar total: 5.150 mm, berat keseluruhan: 8.000 kg, masa garansi: 12 bulan, tinggi dalam: 5.000 mm, panjang dalam: 12.000 mm, lebar dalam: 5.000 mm, Perlengkapan: kabin, pencahayaan, EN: PAINT BOOTH 12x5x5M Model from the EZ Series: - LED ceiling lighting - LED side lighting - RIELLO oil burners - Four fans, including: ‎ ㅤ- 2x supply air fans ‎ ㅤ- 2x exhaust fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm should be considered – can be positioned on the right or left side. - Structure: Galvanized steel frame construction - Heat exchanger: High-quality stainless steel - Panels: Filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibrations and the air thrust effect from the main supply air duct. Dual-layer roof: - Outer top layer Kjdpjxm U Exofx Ah Tjlu - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: radial fan 7.5 kW – 2 units - Exhaust system: radial fan 7.5 kW – 2 units Air filtration system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 angled fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burners: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heat-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the roof of the cabin - Insulated roof - Pass-through doors - Water wall - Color according to RAL color chart - EX version (explosion-proof) available

Kondisi: baru, Tahun pembuatan: 2026, - External dimensions: 8125 x 4650 x 4600 mm - Internal dimensions: 8000 x 4500 x 3800 mm - Entrance gate: 4000 x 3800 mm (four-leaf) - Service door: 640 x 1800 mm - Construction: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 22 kW - Seating: inside/outside (after the cabin roof has been installed by the customer on site) - Floor fully sanded - Air supply system: jet turbine 5.5 kW – 2 units - Exhaust system: jet turbine 7.5 kW – 1 unit - Ceiling lights: LED fluorescent lamp panels, 36 pcs. - Side lights: LED panel 120x30cm – 12 pcs. Output: 48 W – single element 1000 lumen - Burner Riello RG5S 160–310 kW Kledsnbdlbepfx Ah Tju - The cabin is available in various colours

Kondisi: baru, Tahun pembuatan: 2025, TM2015 Spray Booth Working dimensions (mm): 2000 (W) x 1500 (H) x 450 (D) Overall dimensions (mm): 2200 (W) x 2250 (H) Technical Data: • 1.5 kW fan power • Capacity: 7,600 m³/h • 950 Pa compression • Right or left discharge • 3-stage air filtration • Filtration efficiency: 98% • Explosion-proof EX fan • Control panel: IP 66 rated • Hermetic lighting, IP 65 rated Our booths are distinguished by very high manufacturing quality, operational safety, and the ability to tailor cabin parameters to your existing facility. We offer consultation for the selection of spray booths, dust extraction systems, exhaust systems, and industrial heat recovery solutions. CHOOSE BUMEXBUMEX SP. Z O.O. Very high quality of machines offered on the market Professional advice and service Warranty Klodjd S N S Hspfx Ah Tju Warranty and post-warranty service Complete technical documentation 100% customer satisfaction All BUMEX SP. Z O.O. products are WE-certified. We offer our own transportation – prices are determined individually for each offer. We issue value-added tax (VAT) invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions! Please do not hesitate to contact us.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Universal cylindrical grinding machine Make: Robbi Group Model: Omicron 600 RT5 Year: 2010 Technical Data Manufacturer: Robbi Group, IT Model: OMICRON 600 RT5 Year of manufacture: 2010 Table Centre distance: 600 mm Maximum grinding length: 600 mm Swivel range: +9° / -5° Centre height above table: 160 mm Workpiece weight between centres: 120 kg Workpiece weight for chuck grinding: 40 kg Tailstock Quill stroke: 25 mm Quill diameter: 43 mm Internal taper: MT 4 Workhead Rotational speed: 0 - 600 rpm Internal taper: MT 4 Spindle bore: 26 mm Grinding wheel Diameter: 450 mm Width: min. 20 / max. 50 mm Bore: 127 mm Equipment - Manual or automatic cycle - Automatic dressing compensation - Simplified presetting of grinding wheel and workpiece All details without guarantee. Klodpfowhm Rfjx Ah Tsu A demonstration under power is possible at any time in our showroom.

Kondisi: baru, Tahun pembuatan: 2026, Daya laser: 12.000 Watt Area kerja laser: 3.048 x 1.524 x 280 mm Kecepatan simultan: 150 m/menit Akurasi posisi maksimum sumbu X, Y: 0,05 mm Maks. baja konstruksi: 30 mm Maks. stainless steel: 25 mm Maks. aluminium: 25 mm Maks. kuningan: 20 mm Maks. tembaga: 10 mm Berat benda kerja maks.: 1.500 kg Panjang: 8.960 mm Lebar: 2.720 mm Tinggi: 2.400 mm Berat mesin: 5.900 kg Total daya terpasang: 62 kW Perlengkapan standar Komponen: Kjdpfx Ahoyz Iu Se Tjlu - Rel linear presisi tinggi: FZS - Rak gigi presisi tinggi: Strronse (Jerman) - Gearbox reduksi presisi tinggi: Techmech (Jerman) - Servo motor dan driver: Schneider / Inovance (Cina) - Katup proporsional kendali listrik: >=10kW Emerson (Cina) - Katup kontrol oksigen: AirTAC (Taiwan) - PLC: Siemens Perlengkapan tambahan - SheetCam – pengenalan lapisan pelat berbasis kamera - NestCam – penataan sisa pelat berbasis kamera

Kondisi: baru, Tahun pembuatan: 2025, Daya laser: 12.000 Watt Area kerja laser: 3048 x 1524 x 280 mm Serempak: 150 m / menit Akurasi posisi maksimum sumbu X,Y: 0,05 mm Maks. baja karbon: 30 mm Maks. baja tahan karat: 25 mm Maks. aluminium: 25 mm Maks. kuningan: 20 mm Maks. tembaga: 10 mm Maks. berat benda kerja: 1.500 kg Panjang: 9.500 mm Lebar: 4.200 mm Tinggi: 2.600 mm Berat mesin: 5.300 kg Daya terpasang total: 60 kW Perlengkapan standar Komponen: Rel pemandu linear presisi tinggi: WON (Korea) atau Rellong (Taiwan) Rak presisi tinggi: Strronse (Jerman) Gearbox reduksi presisi tinggi: Techmech (Jerman) Servomotor dan driver: Inovance (China) Katup proporsional listrik: Kedpjv U A I Iefx Ah Tjlu

Kondisi: baru, Tahun pembuatan: 2026, Daya laser: 12.000 Watt Area kerja operasi laser: 3048 x 1524 x 280 mm Kecepatan simultan: 150 m / mnt Akurasi posisi maksimal sumbu X,Y: 0,05 mm Baja konstruksi maks.: 30 mm Stainless steel maks.: 25 mm Aluminium maks.: 25 mm Kuningan maks.: 20 mm Ksdpfxozcum Nj Ah Tjlu Tembaga maks.: 10 mm Berat benda kerja maks.: 1000 kg Panjang: 8960 mm Lebar: 2720 mm Tinggi: 2400 mm Berat mesin: 5900 kg Daya terpasang total: 36 kW Perlengkapan Standar Komponen: Rel linear presisi tinggi: FZS Rak gigi presisi tinggi: Strronse (Jerman) Gearbox reduksi presisi tinggi: Techmech (Jerman) Servomotor dan driver: Schneider / Inovance (Tiongkok) Katup proporsional kontrol elektrik:

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, kapasitas angkut: 3.300 kg, berat kosong: 795 kg, accessories Load center: 600 Mast type: None Condition: Ready for use and fully functional Kljdpou Dzrhjfx Ah Tsu Technical condition: Very good Description: In addition to this Luck model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in stock in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing options are always available at attractive conditions. We are also happy to buy your used machines outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail on this LOAD STABILISER. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale at our facility.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 6.000 kg, berat kosong: 1.250 kg, panjang total: 2.800 mm, Tragedorn Load center: 2000 Condition: Ready for operation and fully functional Ksdpeu Dzrbsfx Ah Tolu Technical condition: very good Description: In addition to this DORN model, we also have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing & financing are always possible for us on favorable terms. We are also happy to purchase your used vehicle directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this TD-270. P.S.: Our master workshop specializes in the repair, servicing, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to display your vehicle with us for commission sale.

Kondisi: baik (bekas), Kode: 0404 Merek: HAMMER - FELDER GROUP Model: A3 - 31 - Standar CE Mesin kombinasi 2-fungsi (surface planer/thickness planer) untuk pertukangan kayu, pembuatan furnitur, perlengkapan joinery, furnitur custom, plastik, dan berbagai aplikasi lain – Standar CE Spesifikasi teknis: Lebar penyerutan: 310 mm Panjang meja: 1.400 mm Pemandu miring 90-45° Motor tiga fasa, 380 V, 4 Hp Poros penyerut dengan 3 pisau Maksimal pengambilan serutan: 4 mm Lebar meja penebal: 306 mm Panjang meja penebal: 540 mm Panjang minimal benda kerja: 145 mm Kecepatan makan penebal: 6 m/menit Diameter inlet hisap: 120 mm Ksdpfx Aozcqmfeh Telu Dimensi total (mm): 1.450 x 600 x 1.000 h Berat: 290 kg

Kondisi: baru, Umbra Group / Kuhn ball screw Panjang total: 1900 mm, panjang ulir: 1460 mm, Ø ulir: 80 mm, pitch: 10 mm, mur: 105 mm, Ø flensa: 145 mm, PCD: 125 mm, bagian 1: panjang: 195 mm, Ø 60/50 mm, ulir: M60 x 2 mm, bagian 2: panjang: 165 mm, Ø 60/56 mm, ulir: M50 x 1,5 mm, belum pernah digunakan, 100% berfungsi, scope pengiriman sesuai foto PERHATIAN: Biaya pengemasan dan pengiriman mohon ditanyakan secara terpisah! Kledpfexaidcox Ah Tou

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,2 kW (24,75 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, konsumsi bahan bakar per jam: 1,5 l/j, kapasitas tangki bahan bakar: 15 l, warna: biru, berat operasi: 1.725 kg, daya angkat: 600 kg/m, tinggi angkat: 3.380 mm, kondisi ban: 100 persen, kondisi penggerak: 100 persen, konfigurasi gandar: 4x4, jumlah tempat duduk: 1, kelas emisi: Euro 5, volume sekop: 0,23 m³, Tahun pembuatan: 2026, Perlengkapan: garpu palet, hidrolik, penggerak semua roda, sekop standar, Kami menawarkan wheel loader Rippa RL06 yang ringkas sebagai unit baru khusus untuk pelanggan bisnis. Mesin ini sangat cocok digunakan di area terbatas dalam pertamanan & lanskap (GaLaBau), pertanian, maupun di depot konstruksi. 🔥 Layanan Eksklusif: Pengiriman gratis hingga 100 km! Kami mengantarkan mesin ini secara gratis dalam radius 100 km dari 76332 Bad Herrenalb langsung ke lokasi Anda (pertanian/tapak proyek). Pembongkaran dilakukan dengan mudah menggunakan truk perusahaan kami sendiri. Status Terkini: Unit saat ini sedang dalam pengiriman menuju lokasi kami. Pemesanan awal sudah dapat dilakukan. Begitu tiba, unit bisa dilihat dan diuji coba di 76332 Bad Herrenalb. Performa & Penggerak: - Mesin: Kubota D1105 (diesel 3 silinder, pendinginan air) - Daya: 18,2 kW / 24,7 HP - Standar emisi: Stage V / EURO 5 - Kecepatan: 0–8 km/jam - Ban: Off-road (traksi optimal) Data Operasional & Hidrolik: - Berat operasi: 1.725 kg (bisa diangkut dengan trailer 3,5 ton) - Beban kerja aman (nominal): 300 kg - Beban maksimum: 600 kg - Ketinggian muatan maksimal: 3.380 mm - Ketinggian pembuangan maksimal: 2.060 mm - Silinder hidrolik: angkat rangkap dua untuk distribusi daya merata - Kontrol: Joystick multifungsi satu tangan (maju/mundur & rangka angkat) Kjdpeyzbdtofx Ah Tjlu Dimensi: - Lebar total: 1.150 mm - Tinggi total: 2.300 mm - Panjang (dengan bucket): 3.650 mm - Radius putar (eksternal): 2.400 mm Perlengkapan & Keamanan (termasuk): - Quick coupler untuk pergantian attachment tanpa alat - Standard bucket tanah (0,23 m³) - Garpu palet - Kanopi operator dengan ROPS (perlindungan rollover) & TOPS (perlindungan jatuh) - Kursi suspensi dengan sabuk pengaman & pelindung samping - Lampu kerja LED & rotator - Sertifikasi CE Harga & Varian Model: - Standar: €13.500,00 nett + 19% PPN (€16.065,00 bruto) - Versi dengan lengan teleskopik: €15.500,00 nett + 19% PPN (€18.455,00 bruto) Penjualan hanya untuk bisnis (B2B). Anda akan menerima faktur resmi dengan PPN tertera. Garansi: 2 tahun garansi pabrikan untuk suku cadang. Sewa Dengan Opsi Pembelian: Setelah unit tiba, kami menawarkan penyewaan mingguan untuk unit demo. Jika pembelian dilakukan setelah sewa, biaya sewa akan dipotong 100% dari harga beli. Logistik & Kontak: Lokasi: 76332 Bad Herrenalb Pemindahan ke trailer atau truk Anda dapat dilakukan gratis di lokasi menggunakan crane kami. Untuk pemesanan awal atau informasi teknis, silakan hubungi kami.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, VLB Group EB-53RH CNC Tube Bender Listrik Penuh 2023 Belum Pernah Digunakan dengan Perangkat Lunak 3D VLB Klsdpfezfqffox Ah Tou Ringkasan: Kapasitas Maksimum (45kg/mm²) Ø53 x 2mm. Sumbu yang Dikendalikan: Presisi 'X'=±0,05mm, 'Y'=±0,05°, 'Z'=±0,05°. Radius Tekuk Maksimum 275mm. Daya Terpasang 35,5kW. Tegangan 380-400V. No. Seri V00656 (2023). CATATAN: Unit ini akan dimuat ke kendaraan pembeli, biaya loading sebesar £250 + PPN akan ditambahkan ke faktur pembeli. Disertakan Blok Penyangga, Tooling & Sakelar Kaki. Dimensi ±6.200 x 1.800mm. Berat 5.100kg. CATATAN: Unit ini akan dimuat ke kendaraan pembeli; biaya loading sebesar £250 + PPN akan ditambahkan ke faktur pembeli.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 5.126 h, Fungsionalitas: belum diuji, daya: 3.500 kW (4.758,67 hp), berat keseluruhan: 43.200 kg, Unit kogenerasi lengkap berbahan bakar minyak/lemak. Motor listrik ABC 16VDZC-1000, alternator AVK DIG150L-6. Sistem lengkap termasuk sistem pengawasan manajemen dan semua perangkat periferal. Seluruh instalasi masih terpasang seperti kondisi aslinya dan dapat dikunjungi. Hubungi melalui email. Kljdoy Hiuqepfx Ah Tju

Kondisi: baru, A first in Turkey; our company manufactures the machines that enable the production of single-layer insulation panels under our own patent and license. Our sandwich panel machines are in operation in 30 different regions around the world. Single-layer insulation panels are also referred to as economical eco-sandwich panels. Please contact us for further information and technical documentation. Kodpfxef Nqlqj Ah Telu

Kondisi: baru, Trapezoidal drawing machine with new technology consists of the following components: hydraulic roll opening and roll loading carriage, 10-ton polyethylene protective film coating unit, metal sheet alignment unit, metal roll forming production unit, 18 and 36 stations depending on the profile type, flying shear unit with continuous length adjustment, automatic stacking and packaging unit, and Siemens automatic electrical control unit. All our machines are CE certified. Please contact us for further information and technical documentation. Kjdpfx Aef Nqghoh Tolu

Kondisi: baru, Fully automatic roof tile machines with metal presses producing roof tile designs in desired sizes. Please contact us for further information and technical documentation. Kjdpfxjf Nqi Ie Ah Telu

Tahun pembuatan: 2024, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1731124010219J, Allpax L-Sealing Machine/Packaging Machine Manufacturer: Hualian Machinery Group Model: PTHW-WS-5045 Serial No.: 1731124010219J Year of manufacture: 01/2024 Condition: used Color: light grey Internal item number: 2025120105 Kljdpfx Aox Ak Nreh Tou Collection address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to provide you with a customised quotation or advise you on project planning or installation queries. Simply let us know your requirements and site conditions. Leverage our many years of experience and our comprehensive network of specialists. We have successfully completed projects for companies in a variety of sectors, such as logistics, pharmaceuticals, crafts, and the electronics industry. Together, we will find solutions to optimise your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components such as picking shelves or containers.

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Irrigation and fertigation system Richel with 4 vertical centrifugal pumps WILO type: Helix. Mixing unit: 12 m³/h Klsdpfsupwhzex Ah Tou 1 wastewater treatment plant manufacturer: UVGERMI Type: 3XAD300, with Hectron AG 100 water filter 1 fresh water tank capacity: 1,900 L 2 x water basins capacity: 3,000 L each

Kondisi: baru, TEST DE TURBOCOMPRESOR TURBO-BOOST-TEST El banco de pruebas de sobrealimentación TURBO-BOOST-TEST permite la calibración profesional y evaluación del rendimiento de turbocompresores. Este banco de pruebas es adecuado para la afinación (tuning) y el ajuste de turbinas, en la fabricación de turbinas híbridas y para comprobar los cambios en el rendimiento de la turbina tras modificaciones. Nuestros bancos de pruebas son sistemas avanzados para la optimización y verificación de turbocompresores en modo dinámico. Permiten ensayar el turbocompresor bajo condiciones prácticamente reales de funcionamiento, garantizando un control total del proceso y la detección de posibles fallos, incluyendo fugas de aceite. CARACTERÍSTICAS DESTACADAS • Pruebas finales completas y ajuste de turbocompresores automotrices para motores de hasta 3 litros • Pruebas dinámicas de turbocompresores • Instalación sobre superficies estándar de fijación • Rodaje y comprobación de fugas de aceite • El ajuste de turbos accionados electrónicamente se realiza mediante conexión a un comprobador externo ATP-3000 • Admite la instalación de turbocompresores de cualquier diseño FUNCIONES PRINCIPALES • Base de datos con más de 2.000 referencias de turbos • Cálculo del rendimiento del turbocompresor • Generación de gráfica de sobrealimentación en función del caudal de entrada y salida • Elaboración automática de los resultados en gráficos • Prueba de actuadores: tipos por vacío, neumáticos y eléctricos Klodpottg S Uofx Ah Tju • Diagnóstico de servomotores de actuadores eléctricos (opcional) • Todas las mediciones en tiempo real • Calibración del banco de pruebas previa al inicio del trabajo • Función de prueba de la válvula N75 • Soplador incorporado para generar flujo de aire constante • Software Boost Test desarrollado internamente • Generación e impresión de informes del proceso de ajuste • Autodiagnóstico ESPECIFICACIONES TÉCNICAS Velocidad máxima de rotor: 99.000 rpm Caudal máximo del compresor: 110 m³/min Presión máxima del compresor: 900 mbar Vacío máximo generado por la bomba de vacío: -800 mbar Alimentación: 380V, 3Ph, 50Hz Consumo de potencia: 6 kW Dimensiones: 1330 × 770 × 1440 mm Peso: 265 kg

Kondisi: baru, WUCHTWELLEN-AUSWUCHTMASCHINE BVI-03-88 Auswuchtmaschine für die professionelle Instandsetzung von Kardanwellen bis 200 kg. Die Hartlager-Ausführung ist für schwere Kardanwellen von Lkw und Sondermaschinen ausgelegt. Die hochsensiblen Lagerböcke ermöglichen zudem eine hochpräzise Auswuchtung von Kardanwellen für Pkw. Die Maschine ist zum Auswuchten von Kardanwellen in Betrieben für Kardanwellenreparatur konzipiert. Sie kann schnell für das Auswuchten einer großen Vielzahl einzelner Kardanwellen unterschiedlicher Bauart sowie für die Fertigung kleiner Serien umgerüstet werden. ZWEIMAL schneller als Ihre Maschine. Diese Auswuchtmaschine ist darauf ausgelegt, die Welle nicht nur präzise, sondern auch schnell auszuwuchten. Wenn Sie 2- bis 2,5-mal schneller wuchten können, ist das Ihr echter Wettbewerbsvorteil. HOCHLEISTUNGSZUBEHÖR Die Maschine ist mit drei Haupttypen von Adaptern ausgestattet: 1. Schnellspann-Universaladapter. Zwei Hauptvorteile: Erstens ermöglicht das spezielle Design das Spannen des Kardanwellenflansches innerhalb von 5 Sekunden – das ist möglich, da der Flansch nicht mit Schrauben befestigt werden muss. DIE WELLE KANN 4-MAL SCHNELLER OHNE SCHRAUBEN GESPANNT WERDEN. Der zweite Vorteil ist die Zentrierringbefestigung. Die Kardanwelle wird über Zentrierringe in den Adaptern montiert; diese Ringe können auf einer normalen Drehmaschine passend zu den meisten gängigen Kardanwellen gefertigt werden. 2. KV-Flanschadapter. Geeignet für das Auswuchten von Wellen mit Vielzahnflanschen. Passend für vier Flanschgrößen: 120, 150, 180, 205 mm. Wird meist bei Lkw-Kardanwellen eingesetzt. 3. Adapter mit Langlöchern. Wird verwendet, um verschiedene Flansche mit Bohrungen zu montieren. Die Befestigung der Kardanwelle erfolgt wie beim Universaladapter über Zentrierringe. HAUPTMERKMALE • Auswuchtung von Kardanwellen mit 2, 3 und 4 Lagerpunkten • Wellenlänge bis 5.200 mm, Gewicht bis 200 kg • Einbau der Kardanwelle in 1 Minute • Standardsatz an Adaptern – Montage von 80 % aller Kardanwellen • Drei Möglichkeiten zur Befestigung des Mittellagers • Hartlager-Maschine – sicheres Auswuchten auch bei großen Unwuchten • Bedienung durch eine Person • Spindelstock mit Längsverstellung – schneller Umrüstvorgang, komfortable Bedienung • Sicherheitsbügel mit Klemmvorrichtung für schnelle Montage Kodpjn E Skwofx Ah Tjlu • Gleichzeitige Messung in allen Ebenen • Maschinenkalibrierung durch den Bediener • Anzeige der Unwucht in Echtzeit • Berichtserstellung und Druckfunktion TECHNISCHE DATEN Maximales Wellengewicht: 200 kg Maximaler Flanschdurchmesser: 300 mm Maximale Wellenlänge: 5.200 mm Anzahl der Lagerstellen: 4 Anzahl gleichzeitig gemessener Ebenen: 2, 3, 4 Min. erreichbare Restunwucht: 10 g mm/kg Drehzahlbereich: 1.000–2.500 U/min Versorgungsnetz: 380 V, 3 Phasen, 50 Hz Minimaler Leistungsbedarf: 3 kW Abmessungen (L x B x H): 6.000 x 1.100 x 1.450 mm Maschinengewicht: 1.100 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Sistem penyaringan serpihan kayu Produsen: Andritz Group Model: Konewood CS600 Kapasitas saringan: 400-675 m3/jam Penyaringan serbuk gergaji dan serutan dari serpihan kayu Konveyor. Struktur Baja: Kedpfx Ahoxn T R Aj Tolu – Struktur penopang baja untuk saringan dan konveyor – Tangga dan jalur jalan untuk operasi dan pemeliharaan