Udara bersih ekstraksi sistem Konverter frekuensi

AL-KO 350 + P FU

Kondisi: baru, With compressed air cleaning and frequency converter Start-up via frequency converter, Pressure transmitter for demand-oriented control Pre-separator integrated, Automatic extinguishing system integrated Efficient and economical: large-capacity compressed air tank with quick-switching diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Hfodpfswzyh Rex Ahnoh So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Extremely economical: energy-efficient IE3 class drives. Safe in case of emergency: service-friendly automatic extinguishing system. Silent operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options—from machine detection to slide valve control to frequency-regulated operation, just to name a few. Nothing escapes: collection bins with inspection window. Practical down to the last detail: container locking with ergonomically shaped tension lever. Retrofittable: can be converted for discharge via briquetting press or rotary valve. - High suction capacity - Minimal space requirement - 100% air recirculation without temperature loss (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control - Optimal filter cleaning - Minimal noise emission - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free container change - (optional: container safety interlock) - Freely configurable, modular and expandable ----- Technical Data ----- Extraction connection Ø: 355 mm Nominal airflow rate: 7,127 m³/h Max. airflow rate: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of collection bags: 3 Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg Standard: GS - HO - 07

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Hfjdpfoxdl Rasx Ahnsh Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: Max. length 600 mm Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drill spindle) - Glue nozzle with adjustable glue dosage - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel supply 1. BASE MACHINE - Robust steel frame construction - Axis movement in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side fences as well as rear fence rail - Pneumatically lowerable center stop, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable - Central lubrication Power control PC85T Modern control system based on Windows PC

Kondisi: baru, with compressed air cleaning and frequency converter Start-up via frequency converter, pressure transmitter for demand-driven regulation Pre-separator integrated, extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet highly effective: OPTI JET cleaning and bag filters with snap ring closures. Exceptionally economical: Energy-efficient IE3 drive systems. Safe in emergencies: Maintenance-friendly automatic extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Numerous options, from machine recognition and actuator control to frequency-controlled operation, to name just a few. No mess: collection bin with inspection window. Practical down to the last detail: container locking with an ergonomically shaped clamping lever. Upgradeable: Option to retrofit for discharge via briquette press or rotary valve. - High extraction performance - Minimal space requirement - 100% air recirculation without temperature loss (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust lock for dust-free container changes (optional: safety interlock for containers) - Freely configurable, modular design for upgrades and expansions ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow: 6,927 m³/h, Hfedpfxsxpximj Ahnoh Maximum air flow: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, Standard: GS - HO - 07

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Top milling unit: yes Hedpfjl Txw Hsx Ahnjfh Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs

Kondisi: sangat baik (bekas), Four-sided planer SCM Compact XL - Planing width: 23 cm - Planing height: 13 cm - Electric adjustment of top head and feed rollers - All spindles adjustable vertically and horizontally - Bottom spindle 4 kW, right and left each with 7.5 kW motor, top 5.5 kW, universal spindle 5.5 kW Hfodpfx Aholat Hdonsh Machine in very good condition

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivel heads. Drilling heads on each side at the front included. Very good condition. Hfsdpfxod N Rb Do Ahnsh Available immediately.

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Hfsded N H A Nepfx Ahnoh Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Tahun pembuatan: 2024, Kondisi: baru, Return system Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edge banding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the KAM. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Technology Extension" for easy rotation of parts during cross edging. Optional: "RTS Compact Ergonomics Package", featuring a lifting table and air-cushion table at the end of the return conveyor for ergonomic working conditions. - Compatible with edge banding machines from all manufacturers - Single-person operation possible - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 days - Rotation unit for small parts - Including conveyor belt (length 4500 mm, width 800 mm) Hfodpfx Asw Nadmehnsh Single-track roller conveyor RTS Compact control system, optional control box Availability: short notice Storage location: Flörsheim

Kondisi: siap digunakan (bekas), Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers Hfedpfxjvu Hgbe Ahnsh - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: baru, Tahun pembuatan: 2024,