Mesin pengepakan bal

ANIS ATS 110-75S-9CT-30kW

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h Hfsdpfx Asvf E Avsabsf - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 24.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 004283-0030, gaya penekanan: 122 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, masa garansi: 24 bulan, tahun perombakan terakhir: 2026, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered by Bollegraaf Recycling Solutions. This listing concerns an HBC120s baler (90kW) equipped with, among other features, cross-tying (5 wires vertical & 5 wires horizontal). This baler is currently undergoing a complete refurbishment in our overhaul workshop. The refurbishment is carried out in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler will be sold with two years warranty included. Technical Specifications, type HBC120S Volume capacity (m3/h) - max.: 815 / 660 / 500 Bulk density (kg/m3) - max.: 20 / 50 / 100 Throughput capacity (T/h) - max.: 16.3 / 33 / 50 The above-mentioned capacities apply only if the machine is used correctly and is continuously and adequately fed with suitable material for at least one hour. Bale weight: approx. 1470 kg (depending on, among others, the type of material and length of bale) Bale length: variable / adjustable Bale height: 1100 mm Bale width: 1100 mm Hjdpfx Ajxcir Esabsff Hopper dimensions: 1100 mm x 1600 mm (these dimensions also determine the size of material that can be processed by the machine). Ram pressure force: max. 119.7 tons Pre-press flap pressure force: max. 65 tons Cycle time, excl. wire tying: 19 seconds Main drive motor: 90 kW (120 HP) Twistomat (knotter) motor: 1.5 kW, SEW Counter pressure pump motor: 1.1 kW (2 HP) Needle installation motor: 7.5 kW, SEW Oil cooler fan motor: 3 kW (4 HP) Pump for oil cooling motor: 4 kW (5.5 HP) Operating pressure: 315 bar Machine weight: approx. 40,040 kg Number of wires: - 5 vertical - 5 horizontal Oil volume: 1,655 liters Oil brand and type: BP-SHF-46 Color: - baler: RAL 6024 (green) - safety doors: RAL 1021 (cadmium yellow) Baler dimensions: - length: 11,765 mm - width: 2,500 mm - height: 7,104 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.900 h, nomor mesin/kendaraan: LP50VH2, Used Presona LP50 VH2 baler in good working condition with conveyor belt Technical data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7–9 t/h - 50 kg/m³ = 8–9 t/h - 100 kg/m³ = 11–14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Loading chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm Hfedpfx Aeyrhi Noabef - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank volume: 600 l - Electric motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Baler, control cabinet, operating panel, and conveyor belt for sale. Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection possible by appointment. We accept no liability for technical information or possible errors. Video footage can be provided upon request.

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 11.850 h, gaya penekanan: 88 t, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), Te koop: gebruikte balenpers + gebruikte transportband Merk: HSM VK 88 + Stadler KF1800 De balenpers betreft een VK 88 R – FU, uitgevoerd met frequentieregelaars, 2 x 45 kW motoren. * Optie voor ontblokkeer-cilinder * Kogelgewrichtbevestiging hoofdcilinder * Stadler transportband, 1600 mm intern Bouwjaar: 2012 Totaal draaiuren: 11.850 De stang van de hoofdcilinder en het afdichtingsset zijn recent vernieuwd. Te vervangen: 2 voorste vloerplaten van de perskamer: midden en voorkant van het kanaal Smeren/vervangen: Enkele zijdelingse diabolorollen zijn gebruikt en in bedrijf; sommige zijn roestig, sommige in goede staat. De pers draait naar behoren en het knopen van de balen gaat goed. Aandrijfwielen ram: OK Zijwielen ram: OK Hfsdpfeyuyg Sex Aabof Hoofdcilinderstang: vrijwel nieuw Hoofdcilinder afdichtingsset: vrijwel nieuw Ram zijnylon strips: 80-90% in goede staat. Fijnafstemming geometrie mogelijk door toevoegen van vulringen (klant heeft onderdelen op voorraad). Mes/tegenmes: goed, ca. 70% Naaldrollen: in orde, maar vervangen is aan te raden + de afsluitplaten Hoofdfrequentieregelaar 1 van 2: Totaal 2 x 45 kW: één van de twee is defect. Het is niet bekend of deze vervangen wordt. De pers draait momenteel op één pomp. Zijwanden perskamer: Zijwanden zijn versleten ter hoogte van de nylongeleidingsplaten: enkele millimeters tot gemiddeld 2 mm. Transportband: Kettingrollen zijn gebruikt en vertonen lichte speling. Smering ontbreekt, maar zijn nog in goede staat. Geleidingsstrips zijn in orde. Opvoerlatten zijn vrijwel geheel versleten. Start/stop via frequentieregelaar. Zijwanden zijn goed op het schuine gedeelte en in de put. Draadrollenplatform: niet inbegrepen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 450 kg, tahun perombakan terakhir: 2026, Perlengkapan: dokumentasi / manual, HSM VK 4812 P Year of manufacture: 2017 Fully automatic baler. The machine has undergone servicing and maintenance by an authorized HSM Service Center based in Germany. The baler is supplied complete with a ramp for ejecting finished bales and stands for binding wire. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Overall dimensions (L x W x H): 6661 x 3994 x 2583 mm Machine weight: 10.2 t Material processed: Foil, mixed paper, cardboard, punching waste Bale tying: 4-fold wire tying We also have other balers in stock. Hsdpeyyi Svofx Aabjff Transport costs depend on weight, volume, and particularly distance. For inquiries, the following information is necessary: delivery address (postal code and city). For further details, please contact us by phone as a telephone conversation is required; please inquire regarding transport costs and shipping options by calling us. Our contact details can be found in the seller’s legal notice. We sell and export worldwide and, thanks to our large storage capacity, can deliver even larger quantities flexibly and promptly. We issue intra-community invoices – without VAT. Opening hours: Mon-Fri: 8:00 am – 4:00 pm Sat: closed