270 S-250 -60

ARBURG

Kondisi: baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 243708, diameter sekrup: 15 mm, panjang total: 2.500 mm, lebar total: 1.500 mm, tinggi total: 2.500 mm, berat keseluruhan: 1.700 kg, daya: 39 kW (53,03 hp), frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 64 A, produsen pengendali: SELOGICA, tegangan kontrol: 230 V, ARBURG ALLROUNDER 220 S 180-70, Mesin Cetak Injeksi - Arus nominal pemanas motor: 57 A - Termasuk alat penarik, produsen MARCZINKOWSKI Perhatian: Barang harus diambil pada tanggal 3 September 2026, dengan jadwal yang akan dikonfirmasi. Itedpfxszldp Re Apajk FCA D-58507 Lüdenscheid – dimuat di atas truk.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 80/45 Tech Clamp force: 45 tons, tie-bar-less Iedpjh Rawbefx Apaetk Screw diameter: 22 mm Year of manufacture: 2004 Control unit: CC 200

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 178759, gaya penjepit: 2.000 kN, diameter sekrup: 35 mm, tinggi pemasangan: 350 mm, panjang total: 5.000 mm, lebar total: 2.200 mm, tinggi total: 3.800 mm, berat keseluruhan: 13.000 kg, daya: 53,5 kW (72,74 hp), frekuensi input: 50 Hz, tegangan masuk: 400 V, produsen pengendali: ARBURG, diameter meja: 1.500 mm, MESIN CETAK INJEKSI ARBURG ALLROUNDER 1500 T 2000-350 - Gaya penutupan: maks. 85 kN - Gaya pembukaan: maks. 120 kN Itodpfxezlfmke Apajk - Langkah pembukaan: maks. 300 mm - Jarak antara pelat penjepit: maks. 650 mm - Panjang sekrup: maks. 145 mm Perhatian: Barang harus diambil pada tanggal 8 September hingga 10 September 2026 pada tanggal yang akan ditentukan. FCA D-63128 Dietzenbach - dimuat di truk.

Kondisi: sangat baik (bekas), Triple pump Arburg A10VSO 100DRS/32R-VPB32UB2, A10VSO 18DFR1/31R-VRA12KB2-S3608, Itodpsu Dk Ryjfx Apask UNIVERSAL HYDRAULIK SSPA-6/136-A-N-R-V0-01 1000001429

Tahun pembuatan: 2002, Kondisi: baik (bekas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Itedpfxolz Rvlo Apajk Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: ISO 30 / BT / MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, no representations or contractual terms are implied. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 74.753 h, gaya penjepit: 600 kN, diameter sekrup: 35 mm, jarak antara tiang: 320 mm, volume langkah: 144 cm³, tekanan injeksi: 1.820 batang, berat injeksi: 132 g, tinggi cetakan (min.): 200 mm, Arburg 320C-600-250 injection moulding machine (241) Option for vertical operation Number: 241 Availability: in stock Year of manufacture: 2008 Manufacturer: Arburg Condition of the injection moulding machine: used Screw diameter [mm]: 35 Shot weight [g]: 132 Injection pressure [bar]: 1820 Clamping force [kN]: 600 Tie bar distance [mm]: 320×320 Platen size [mm]: 446 x 446 Isdsw R Tixepfx Apajtk Min. mould height [mm]: 200 Control type: Selogica Language: German Installed power [kW]: 23.9 Operating hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Hopper: NO Robot interface: Yes Core puller: 1x

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Tinggi minimum pemasangan alat: 200 mm Jarak maksimum antar pelat: 550 mm Jarak antar kolom: 270 x 270 mm Diameter sekrup: 15 mm Gaya penutup: 400 KN Termasuk perangkat pengatur suhu. Ijdezkfh Sspfx Apaetk Termasuk robot penanganan. Mesin dalam kondisi sangat baik dan berfungsi.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Gaya penutupan: 110 t Diameter sekrup: 22 mm Volume tembakan: 41 cm3 Rasio L/D sekrup: 20 Itodpfeu Eki Sjx Apaek Volume langkah terhitung: 41,8 cm3 Tekanan injeksi yang benar: 2.864 bar Kecepatan putaran maksimum sekrup: 500 min Torsi sekrup: 150 Nm Gaya kontak gerak nosel: 250/40 mm/kN Aliran injeksi luar: 76 cm3/s Daya pemanas silinder: 6,3 kW Jumlah zona pemanasan: 4 Tipe: Horisontal Penggerak: Listrik

Kondisi: bekas, Tahun pembuatan: 2001, jam operasional: 38.850 h, gaya penjepit: 25 kN, volume langkah: 20 cm³, tekanan injeksi: 1.810 batang, berat keseluruhan: 1.900 kg, diameter konveyor sekrup: 18 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan Iedpfxjyt R S Ae Apastk

Tahun pembuatan: 2006, Kondisi: bekas, Gaya penguncian: 500 kN, jarak antar kolom: 320x320 mm, diameter silinder: D30, sistem kontrol: Arburg SLOGICA, jumlah jam operasi otomatis: 63.147 jam, jumlah jam operasi pompa: 65.755 jam, jumlah jam operasi semi-otomatis: 14 jam, jumlah siklus: 13.943.435. Pemeriksaan di lokasi dapat dilakukan. Itsdpfxszun Uvj Apaok

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, schliesskraft-und-parameter-1 Isdpsvl Skgefx Apajtk

Tahun pembuatan: 2003, Kondisi: bekas, Gaya penutup: 300kN, jarak tiang: 270x270mm, diameter silinder: D15, sistem kontrol: Arburg Control+, jumlah jam operasi otomatis: 63.212 jam, jumlah jam operasi pompa: 63.212 jam, jumlah siklus: 15.328.195. Pemeriksaan di lokasi dimungkinkan. Itedpfxozun Upo Apaok

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), The following six Arburg injection moulding machines are available: 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470bar, injection volume: 106cm³, centring ring: 125mm/125mm, max. opening stroke: 550mm, daylight between platens: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, overall machine dimensions X/Y: approx. 4,000mm/2,300mm. Including Multilift handling unit. Isdpfx Apetyyn Hjaetk 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470bar, injection volume: 106cm³, centring ring: 125mm/125mm, max. opening stroke: 750mm, daylight between platens: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, overall machine dimensions X/Y: approx. 4,700mm/2,350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500bar, injection volume: 31cm³, centring ring: 125mm/110mm, max. opening stroke: 350mm, daylight between platens: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340bar, injection volume: 30cm³, centring ring: 110mm/110mm, max. opening stroke: 425mm, daylight between platens: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500bar, injection volume: 31cm³, centring ring: 110mm/110mm, max. opening stroke: 550mm, daylight between platens: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, overall machine dimensions X/Y: approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500bar/2,340bar, injection volume: 20cm³/30cm³, centring ring: 110mm/110mm, max. opening stroke: 425mm, daylight between platens: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, overall machine dimensions X/Y: approx. 3,300mm/1,100mm. Documentation available. An on-site inspection is possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection Unit: Itodpfx Apsk Rnq Neaek Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Clamping Unit: Clamping force: 60 t Tie bar spacing: 370x320 mm Max. platen size: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 interface Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/Motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Minimum/maximum installation height: 200 mm / 595 mm, Opening stroke: 200 mm, Clamping force: 600 kN, Screw diameter: 25 mm, Tie bar spacing: 370 mm, Maximum injection volume: 49 cm³, Operating hours: 55,682 h. Documentation available. An on-site inspection is possible. Itedpfx Aet E Tq Rjpaok