Beli Hebrock Akv 3005 Dk bekas (49)

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lokasi penyimpanan: Nattheim Kfedpjxyiiljfx Aahoa

Kondisi: bekas, Tahun pembuatan: 2005, nomor mesin/kendaraan: Werksüberarbeitungsnummer: WÜA920DK-F12960, Mesin bekas GM020.0029 Tahun pembuatan: 2005 AKV 3005 DK-F Versi 8 mm Stasiun milling 1: Kombinasi Kedjw In R Eepfx Aahjfa Stasiun pembersih Pemotong sudut bundar Pemotong sambungan Pisau tarik permukaan dengan pengangkatan Pisau tarik profil Rangka bawah Pengaturan milling pneumatik Kontrol SPS Persiapan untuk tangki yang dapat diganti

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 730 h, Edgebanding machine Hebrock AKV3005DK-F with jointing, corner rounding, and double scraper units. Very well-maintained machine from a small business, in excellent condition. Kodpfetpn Etjx Aahjfa Touch-screen interface with PLC control for simple operation, allowing storage of up to 12 programs. Edge thickness (roll): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed speed: approx. 10 m/min Noise reduction hood Extendable workpiece support, special version extendable up to 950 mm Extraction connection: 80 + 140 mm Units/Aggregates: Quick-change glue pot with glue outlet, two glue pots included (one has been used for EVA adhesive, one for PU adhesive; the PU glue pot is nearly new and was only purchased for a specific job). Manual pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Manual edge thickness adjustment with SIKO counter Joint milling unit with Leitz Whispercut DIA cutters, still sharp Gluing unit with automatic edge feeding for coil material up to 3 mm Pressure zone with 4 rollers End trimming saw Integrated edge scrap container Combination milling unit R2 with pneumatic switching for thin and thick edges Corner rounding unit R2, pneumatically adjustable for thin and thick edges The contour milling unit can also be used in shelf program mode, i.e., only the straight edge is rounded, not the corners. Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood interlock CE marking Operating manual A video of the running machine can be sent upon request. All turn plates for the milling and scraper units have been renewed or rotated; saws have been sharpened. The machine is ready for immediate use. Only the joint DIA cutters (Whispercut) have not been renewed but are still sharp. Paint damage has been touched up. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot on), and the frequency inverters have only been powered for approx. 455 hours. The machine is in very good condition; see original photos. Machine dimensions (LxWxH): approx. 5000 x 1400 x 1550 mm Weight: approx. 1550 kg The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this seller.”

Kondisi: bekas, Tahun pembuatan: 1996, Arah gerak pelat: dari operator ke kiri Ketebalan maksimal edge tape: 8,0 mm Lebar benda kerja minimum: 70 mm Kecepatan umpan: 11 m/menit Waktu pemanasan: 4,5 menit Majalah rol otomatis: Ya Gunting potong sampai: 0,2 - 3,0 mm Pemasukan tepi secara individu: Ya Perekat otomatis: baskom lem dengan granulat di atas Gergaji potong: tetap 90° Unit frais rata: Ya Unit frais kombinasi: Ya Tampilan unit: tampilan unit Jenis kontrol: manual Pengoperasian: sakelar pilih/tombol tekan Perangkat penggerak: Ya Tudung pelindung: Ya Tinggi kerja atau tinggi meja input: 870 mm Berat sekitar: 670 kg Kfsdsxwdp Uspfx Aahsa Dimensi: 3600 x 1400 x 1200 mm Daya motor: 11 kW Diameter hisap: 120 mm Lokasi penyimpanan: pemasok

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Hebrock AKV 3003 DK-F ini diproduksi pada tahun 2002. Mesin edge bander yang kokoh dengan total daya 10,5 kW, beroperasi pada 230/400 V dan 50 Hz. Ideal untuk proses edge banding yang efisien. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Edge Banding Kfedpfjx E Eayox Aahja

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Maks. tinggi benda kerja sekitar 40 mm Min. panjang benda kerja sekitar 250 mm Min. lebar benda kerja sekitar 70 mm Kecepatan pemajuan sekitar 11 m/menit Ksdpfx Aswka Tloahsfa Siap operasi dalam waktu sekitar 4-5 menit Daya terpasang sekitar 11 kW Dengan penggaris masukan berpemanas Dengan wadah lem pemanas cepat Pemotongan rol pneumatis hingga 3 mm Dengan gergaji potong hingga ketebalan tepi 5 mm Dilengkapi stasiun milling opsional dengan pisau insert kombinasi untuk milling radius, lurus, dan chamfer Lengan penyangga dapat dilipat dan ditarik ke depan Dengan sasis Dengan sistem ekstraksi terintegrasi P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2010, panjang total: 5.250 mm, tinggi total: 1.780 mm, lebar total: 1.060 mm, de-01 Kfjdowp D Udepfx Aahoa

Kondisi: sangat baik (bekas), Edge bander Hebrock 3003 Well equipped, available for inspection before purchase PRE-MILLING cutters Zero joint AirTronic system – adhesive-free hot air technology Glue application by roller Pneumatic pre-cutting guillotine Pressure rollers Anti-adhesive fluids Finishing saw for trimming edges Top/bottom milling unit, R1 – R2 radius changeover pneumatic Pneumatic corner rounding unit Flat scraper Max. workpiece height: 50mm Kfsdpfx Aswmc I Djahea Max. edge material thickness (in roll): 3mm Feed speed: 10m/min Power requirement: 15.8kW Condition: Very good, fully operational and functional

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Mesin bekas GM020.0068 Kfedpow Nih Iofx Aahea AKV 3003 DK - F Tahun pembuatan: 2007 Spesifikasi: 3 mm Stasiun milling ke-1: Kombinasi Pisau tarik permukaan dengan pengeluaran Rangka Penyesuaian milling pneumatik Tuver saklar batas, kemiringan 7,5°

Kondisi: bekas, Tahun pembuatan: 2018, Edge banding machine AKV 3006 DK - F with jointing cutter unit, including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Ksdpfoxfh Tmsx Aahsfa Technical Description: - Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm - Max. workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable cutter (combination design) and fine cutter adjustment from the operator side - Spaces available for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view window from both rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg, depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment, 1 pc. Toggle between radius – flush/chamfer for combination milling stations. Switching between chamfer or flush is done manually via the stop flap in the machine. Buffing station (polishing mop): 1 pc Corner rounding cutter: 1 pc, including combination tool and pneumatic setting for chamfer/radius. Maximum workpiece thickness 40 mm. Minimum workpiece length 300 mm. Radius R 2.0 mm. Radius scraper: 1 pc, including pneumatic lift device, radius R 2.0 mm. Flat scraper: 1 pc, with pneumatic control. Glue pot quick-change system, including second glue pot and downward glue outlet, 1 pc for quick color change. Grooving saw unit, horizontal into the edge, 1 pc, including pneumatic lift device and grooving tool. Separate extraction for jointing unit, 1 pc, directly at the jointing unit, vertically upward, d=80 mm for optimal extraction; strongly recommended from model AKV 3005 DK-F onwards. Ball bearing for corner rounding cutter 24.1 mm, 1 pc Ball bearing for corner rounding cutter 24.2 mm, 1 pc Interchangeable motor 0.37 kW for corner rounding cutter, 1 pc, with quick-change device incl. radius cutter R 1. Interchangeable spindles, 1 set = 2 pcs, 1 set Quick change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim.

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A right-hand edge banding machine by Hebrock is available. Workpiece thickness range: 10mm–50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (coil material): 0.5mm–5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions (L/W/H): approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. An on-site inspection is possible. Kodpfow A R S Nsx Aahofa

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Edge banding machine with pre-milling unit (incl. DIA tooling), with PLC control (incl. touchscreen). With hotmelt glue application to the workpiece for edge material up to 3 mm: maintenance-free, coated glue pot with quick-change system, HF (high-frequency) end trimming station (approx. 16,000 rpm) for front and rear edge overhang, HF milling station (approx. 16,000 rpm) with replaceable insert cutter (combined design), fine adjustment of milling from operator side (Hebrock system), corner rounding unit (minimum workpiece length 300 mm, maximum workpiece thickness 40 mm), surface scraper incl. pneumatic lift, robust chain feed, double pressure rollers on top, viewing windows for aggregates from machine rear and operator side, extendable workpiece support, feed rate approx. 10 m/min, workpiece thickness up to 60 mm, including 1x spare glue pot, including chassis. Kfodpsl H E H Hofx Aahja

Kondisi: bekas, Tahun pembuatan: 2012, de-to-hu-01 Kfjdewnhb Sspfx Aahea

Kondisi: bekas, Edge bander Hebrock AKV 3005, peralatan lengkap, dapat diuji sebelum pembelian, Kfedpfxsw I Sp Ss Aahoa Cairan sebelum pisau penggilingan, Pisau penggilingan awal, Aplikasi lem dengan rol, dilengkapi pembuangan lem, Panci lem kedua termasuk, Gunting pneumatik awal, Roll penekan, Gergaji potong akhir, Unit penggilingan atas-bawah, R1 – R2 dapat disetel secara pneumatik, Pisau siklin profil, Unit pembentukan sudut, Cairan sebelum pisau siklin, Pisau siklin datar, Polisher, Maks. tebal edging roll 3mm, Maks. tebal edging lem 12mm, mesin dalam kondisi sangat baik.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3074, laju pemakanan gandar Y: 10 m/menit, panjang total: 4.984 mm, tinggi benda kerja (maks.): 60 mm, lebar total: 1.425 mm, ketebalan tepi (maks.): 3 mm, tinggi total: 1.618 mm, berat keseluruhan: 1.400 kg, jenis arus masuk: tiga fasa, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 400 V, diameter nosel ekstraksi: 140 mm, tinggi kerja: 888 mm, arus masuk: 32 A, frekuensi input: 50 Hz, diameter sambungan ekstraksi: 140 mm, tahun perombakan terakhir: 2025, Our reliable edge banding machine, originally purchased new in 2016, is now for sale due to the acquisition of a new machine. The unit has been operated in an 8-person carpentry workshop. A comprehensive refurbishment was completed in January 2025, which included new radius scrapers, new milling tools, and new polishing wheels. The pre-milling unit was sharpened, the adhesive roller’s clutch was replaced, and the glue tank underwent a complete overhaul and cleaning. The machine is suitable for both EVA granulate (e.g. Henkel Dorus KS351) and PUR gluing. The pre-milling depth, edge banding material thickness, and the position of the lower and upper milling tools can be conveniently adjusted via handwheels located outside the machine housing. Custom edge banding programs can be saved and accessed via the machine's control interface. Switching between 0.4 and 2.0 mm edge thickness is pneumatic and program-controlled. Kfjdpfoxlr S Hex Aahoa Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen control panel - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness (roll): 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding for up to 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm for end trimming saw / 220 mm for corner rounding - Processing units: - Diamond pre-milling unit (12,000 rpm) - Separating liquid tank/spray - Gluing unit - Edge end trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning liquid tank/spray - Flat scraper - Polishing wheel The listed price does not include VAT.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Marke: Hebrock Kedpsq Ihxpjfx Aahefa Modell: AKV 88 D Maschinennummer: 569-P3 Baujahr: 2005 Technische Daten: Maximale Kantenstärke: ca. 3 mm Maximale Arbeitshöhe: 50 mm Mindest-Innenradius: ca. 8 mm Vorschubgeschwindigkeit: 0-7 m/min Aufheizzeit: ca. 6,5 min Motor: 9,3 kW, 50 Hz, 400 V Maschinenabmessungen (LxBxH): 1360 x 690 x 1220 mm Gewicht: ca. 150 kg Lager-Nr.: 2001921BXA

Kondisi: bekas, Tahun pembuatan: 1994, for pre-coated edges including large quantity of edge material with double-sided cantilever end cap station 3-roller feed used, in good condition Manufacturer: Hebrock Model: AKV-83 Year of manufacture: 1994 Edgeband thickness: 1.0 mm Maximum workpiece height: 50 mm Minimum workpiece width: 50 mm Minimum workpiece length: 170 mm Required space: approx. 1700 mm x 690 mm x 500 mm Kodpfx Ajvwfzvsahjfa Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 800 kg, tinggi kerja: 870 mm, daya: 11 kW (14,96 hp), lebar benda kerja (maks.): 70 mm, technical data: Kfodpoug Uqaefx Aahoa Max. edge thickness: 5 mm / 8 mm Max. workpiece height: approx. 40 mm / 50 mm Min. workpiece length: approx. 250 mm / 300 mm Min. workpiece width: approx. 70 mm Feed speed: approx. 11 m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11 kW Electrical connection: 230/400V / 50/60 Hz Working table height: 870 mm Dimensions (LxWxH): 4100 x 1400 x 1300 mm Condition and further details see images.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Marke: Hebrock Modell: AKV 83 F Baujahr: 2004 Kfedpfxeu Racxj Aahea Maschinen-Nr.: 10759 Technische Daten: Werkstückdicke: 10 – 50 mm Vorschubgeschwindigkeit: 3 – 4 m/min Elektrischer Anschluss: 220/380 Volt, 50 Hz Leistung: 3 kW Abmessungen (gesamt): 1750 x 800 x 1250 mm Gewicht: ca. 95 kg Heizung: 3 kW, stufenlose elektronische Temperaturregelung, 0 – 650 °C Motor: 3,5 kW Lager-Nr.: 2002311BXA

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 585, Marke: Hebrock Modell: AKV 1000 V Maschinen-Nr.: 585 Baujahr: 1995 Kfodoib H Slepfx Aahsa Technische Daten: Kantenbandstärke max.: 3 mm Kantenbandhöhe max.: 50 mm Vorschubgeschwindigkeit max.: 7,5 m/min Mit Schneidmesser Arbeitstischlänge: 2.200 mm Motor: 7 kW, 50 Hz, 230/400 V, 3-phasig Transportmaße: Länge: 220 cm Breite: 115 cm Höhe: 150 cm Lager-Nr.: 2001164BXM

Kondisi: baik (bekas), Tahun pembuatan: 2002, I am selling a HEBROCK AKV 088D edge banding machine for shaped workpieces. Year of manufacture: 2002. Suitable for curved elements. Good condition, available for inspection! Optionally, the HFF08 radius milling unit can also be purchased. Kfjdpjvx D Auefx Aahja

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 468 h, Edgebanding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Edge thickness (coil) approx. 0.4 - 2mm Workpiece height approx. 10 - 40mm Feed speed approx. 7m/min Soundproof enclosure Extendable workpiece support Extraction port 1 x 140mm Units: Pressure beam with manual adjustment and SIKO counter Infeed fence with manual adjustment and SIKO counter Edge thickness adjustment with manual setting and SIKO counter Joint milling with diamond cutters, cutters have been resharpened Gluing unit with automatic edge feed for coil material up to 2mm Glue pot with quick glue change system for fast color change Pressure section with 3 rollers Cut-off saw Combined milling unit, R2 with manual adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Corner rounding unit R2, manually adjustable between thin and thick edge The contour milling can also be used for shelving program, i.e., only straight edges are rounded, not the corners Glue joint scraper, manually retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent on request. All indexable inserts of the milling units and scrapers have been renewed or rotated, saws have been sharpened. The machine is therefore ready for immediate use. The diamond joint cutters have also been resharpened. Paintwork repaired where necessary. Machine has approx. 468 operating hours. Machine is in very good condition, see original photos. Machine dimensions approx. 4050 x 1100 x 1400mm (LxWxH) Weight approx. 800kg. The machine can be demonstrated by appointment at our site. We only offer machines that are available for demonstration in our warehouse, see "more offers from this seller". Kfsdpfx Aasx Nbplshsa

Kondisi: baru, ebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. The 3.3 m long F 2 is not only affordable and space-saving. It also offers the features you need to process perfect edges from the start: diamond-tipped jointing cutters ensure excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm Jointing cutter (incl. Dia - tool) for cutting depths up to 2 mm Maintenance-free glue pot with quick-change reservoir system incl. glue discharge device HF end trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version) Robust chain feed Ball-bearing double pressure rollers Kjdpfx Aaol D Rp Eshjfa Viewing window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) F2/27 nesting for milling stations

Kondisi: bekas, hebrock-euro-3001-kantenanleimmaschine Kfjdpfx Aasxdc D Rohea

Kondisi: bekas, Tahun pembuatan: 2015, used_machine_2015_hessen Kfjdpfx Aajx Enqhshoa