Lini Produksi Lapisan Atas Buerkle Liar

BÜRKLE Wild

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.750 mm, lebar total: 2.800 mm, tinggi total: 1.830 mm, persyaratan ruang panjang: 2.800 mm, lebar yang dibutuhkan: 2.850 mm, kebutuhan tinggi: 1.900 mm, produsen motor: Bitzer, laju aliran volumetrik: 940 m³/jam, EN: Two used Bitzer screw compressor skids for low-temperature Freon applications. Both skids are supplied with a shared control panel. Originally, each skid was intended for a separate cold store, but the capacities listed in the specifications are combined. Skid 1 is fitted with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW DE: Zwei gebrauchte Bitzer-Schraubenverdichterskids für Niedertemperaturanwendungen mit Freon. Beide Skids werden mit einem gemeinsamen Schaltschrank geliefert. Ursprünglich war jeder Skid für einen eigenen Tiefkühlraum vorgesehen, die in den technischen Daten angegebenen Leistungen sind jedoch zusammengerechnet. Dcsdox Ap Hpspfx Ag Dsg Skid 1 ist ausgestattet mit zwei Bitzer HSN 7461-70-40P halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern. Dieser Skid hat ein Fördervolumen von 440 m³/h bei 50 Hz und 532 m³/h bei 60 Hz. Skid 2 wird mit zwei Bitzer HSN 7471-75 halbhermetischen Schraubenverdichtern, einem Bitzer FS 3102 Flüssigkeitsabscheider, einem Bitzer OA4088 Ölabscheider, einem gelöteten Wärmetauscher als Economizer, einem WTT GmbH WP 7M-44 gelöteten Wärmetauscher zur Wärmerückgewinnung sowie Druck- und Sicherheitsschaltern geliefert. Dieser Skid hat ein Fördervolumen von 500 m³/h bei 50 Hz und 600 m³/h bei 60 Hz. Bitzer HSN 7461-70-40P (x2) Leistungen: -20ºC/+40ºC: 229,6 kW -30ºC/+40ºC: 157,4 kW -40ºC/+40ºC: 102,0 kW -45ºC/+40ºC: 79,8 kW Bitzer HSN 7471-75 (x2) Leistungen: -20ºC/+40ºC: 240,6 kW -30ºC/+40ºC: 165,8 kW -40ºC/+40ºC: 109,0 kW -45ºC/+40ºC: 86,0 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, output: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection possible. Sale of individual machines possible. Dcodpfx Asvcpz Rsg Deg

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Dcsdpfx Aorq Ebfsg Dog Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Kondisi: baik (bekas), Tahun pembuatan: 1994, Filler block, manufacturer: BKM / Nagema, type: Varifill 40/10K/10PP, capacity: 12,000 bottles/hour, equipped with 40 filling valves, 10-head crowner and 10-head screw capper (for MCA 28 closures), with double pre-evacuation, previously used on 0.33 l longneck and 0.5 l NRW bottles, machine direction: left to right, with Siemens S5 control system, year of construction: 1994. Dcjdpon D Hm Sefx Ag Dsg Dimensions: Length: 4,000 mm, Width: 2,700 mm, Height: 2,800 mm.

Kondisi: baik (bekas), Tahun pembuatan: 2005, de-4789672b Dcodpextxg Hofx Ag Deg

Kondisi: hampir baru (bekas), Minimum input length: 500 mm, maximum: 6 m. Cross-section: max. 140 x 250 mm Dcjdpfsr A Et Tjx Ag Dsg Motor: 5.5 kW Saw stroke via servo swing arm Feed via rollers, 6 pieces on top, 6 pieces on bottom CNC control Maxi 8.0 1x sorting unit, each 11.5 m The machine will be configured according to your requirements.

Tahun pembuatan: 1990, Kondisi: baru, Brand SKF Type 6202-Z/QE6 Year of manufacture: Unused Weight (kg) approx. 9,400 gross / 8,780 net Quantity in stock 193,200 (approx.) Manufactured in France Comments Contact us for minimum order quantity Dsdoqa Am Topfx Ag Dscg Terms of sale Contact us for minimum order quantity

Tahun pembuatan: 1993, Kondisi: bekas, • Working width (mm): 2200 • Motor power (kW): 22 Dcodpen I Twysfx Ag Dog • Upper rollers: with PU rings • Lower rollers: corded • Saw shaft: included

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Four-side planer - Maximum planing width: 23 cm - Maximum planing height: 16 cm - 2 feed rollers integrated into the table - Chrome-plated table Dcsdpfx Aohlp D Neg Dog - Infinitely variable feed speed adjustment - 2 overhead return rollers positioned in front of the lower head, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, with little use. Equipped with spiral cutterheads on the bottom, right, and left spindles, and a Tersa knife head on the top spindle.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 10021711, berat keseluruhan: 1.400 kg, kapasitas angkut: 210 kg, produsen pengendali: KUKA, model controller: KRC 4, 1. Robotic Arm • Manufacturer: KUKA Deutschland GmbH • Model: KR 210 R3100 Ultra (KR210R3100 ULTRA C4 FLR) • Article number: 10021711 • Serial number: 1239324 • Year of manufacture: 04/2019 • Net weight: 1,154 kg • Payload: 210 kg • Reach: 3,096 mm • Country of origin: Germany Dodpfx Aov Tyw Djg Djcg 2. Robot Controller • Model: VKR C4 • Article number: 1106074 • Serial number: 3007941 • Year of manufacture: 10/2019 • Weight: 168 kg • Supply voltage: 3x400 V • Mains frequency: 50/60 Hz • Full load current: 22 A • Line fuse: 25 A • Country of origin: Hungary 3. Extraction Unit • Manufacturer: ESTA Apparatebau GmbH & Co. KG • Model: Kleinentstauber OM-8 • Serial number: 19002523 • Year of manufacture: 2019 • Voltage: 400 V • Power: 0.55 kW • Current consumption: 1.4 A • Noise level: 10A [dBA] • Max. Air flow rate: 600 m³/h • Weight: 60 kg • Protection class: IP44 • Max. vacuum: 1,600 Pa • Country of origin: Germany 4. Equipment & Special Features • Teach pendant with connection cable (visible in the control cabinet) • External electric/control cabinet installation with Ethernet and safety connections (KUKA standard) • Additional attachment mounted on robot flange for special applications (e.g. grinding or deburring) • Pedestal for stationary floor installation • Control and power cables pre-assembled and integrated • System is palletised and ready for transport