Sander sabuk lebar

Bütfering OPTIMAT SBC 313 QCE

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 For cutting fixed lengths Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Fpsdpfx Agsu Atmuo Rer Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and Fedpfx Agot Hagne Rjpr screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Fedpfxed H Sc Eo Ag Ropr Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Motorleistung, dritte Einheit: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Tahun pembuatan: 1998, Kondisi: baik (bekas), I am selling a dowel boring machine with dowel inserter KOCH Sprint-PTP Year of manufacture: 1998 Fjdpfx Ajd Exwgsg Rspr Number of dowel spindles: 1 Number of insertion heads: 1 Programming CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available immediately

Kondisi: bekas, nomor mesin/kendaraan: 007601, Working area X-axis: 4320 mm Working area Y-axis: 2245 mm Fpjdpfsu N Skfjx Ag Rer Working table: Nesting table Main spindle power: 9 kW Number of controlled axes: 3 axes Number of drilling spindles: 16 Number of tool positions: 8

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Fsdpfx Agjrmucxo Rspr Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: baru, Tahun pembuatan: 2023, Orbital sanders are designed for sanding straight, curved, and shaped pieces with round or oval cross-sections, etc., and with variable thickness for chairs, tables, beds, and related items. The main features of the machine are: frame made of electro-welded steel; rotating disc with 2 counter-rotating sanding belts driven by an electric motor, with a rotating movement around the workpiece; electrical control panel; 2 adjustable worktables (infeed – outfeed); option for mounting 2 automatic workpiece feed units with variable speed via frequency inverter. Sanding belts: 80 x 1260 mm Fpodpfx Aoqnufvog Ror Min./max. workpiece diameter: 10-100 mm (Ø) Min. curvature radius: 200 mm Dimensions: 760 x 1000 x 1800 mm 3 units Camam, Comec, OMEF, Brusa di Garboli

Kondisi: bekas, Tahun pembuatan: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: - For classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry design bridge - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height DYNESTIC table: Fpedpfx Agswkbbds Rer Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid division - Continuous grooves in X and Y axes - Groove spacing: 50 mm - With 25 meters of sealing cord for clamping the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y axis - 32 mm grid - Max. drill bit diameter: 35 mm - Total drill length: 70 mm from mounting end (depending on panel thickness) - Spindle stroke: 70 mm - Rotation: right/left reversing - n(max): 1000 - 4400 rpm, infinitely adjustable - Interface: M10 thread – fitting diameter 11 mm - Without tool, without interface - 6 horizontal spindles: - 2 twin-drill spindles in X axis - 1 twin-drill spindle in Y axis - Interface: M10 thread, fitting diameter 11 mm - Total drill length max. 63 mm from mounting end - Without tool, without interface - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm, variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-handed thread nut (for right-sided tools) - With collet chuck with HSK shank - Ceramic bearings (hybrid design) - Max. tool weight: 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standards - Side and rear safety fencing - Vacuum pump: 500 m³/h, dry-running - Personnel safety via light barriers in front machine area - Handheld control device for remote machine operation with the following functions: - Start/stop processing program - Speed control for processing cycles - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software, 1 machine license consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust by overpressure in each guide carriage - Simultaneous lubrication for all linear guides

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Fpedpfjvvkfwsx Ag Ror

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 9 kW (12,24 hp), Ott veneer press Connection rating: 380V, 9kW Plate size: 2250 x 1350 mm Elkom heating plates, gold-anodised Plates and hydraulics in good condition Fpjdotwp Iwopfx Ag Ror