Bandsaw - horizontal

BERG & SCHMID GBS 240 AutoCut

Kondisi: baru, en1 Iasdpfx Aaed Iip Ss Nsl

Kondisi: baru, OPTIMUM OPTIsaw S275N Metal Band Saw - Exhibition machine - Continuously adjustable feed rate, swiveling design ----- Technical Data ----- Swivel range: 0 - 60°, Iaodpfxeu R S Hpo Aa Nol Cutting height: 150 mm, Cutting depth: 230 mm, Blade speed: 45 / 90 m/min, Blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - New exhibition machine -

Kondisi: baru, Cutting diameter: 240 mm Saw band length: 2730 mm Cutting width: 270 mm Cutting speed: 37 + 74 m/min Saw blade dimensions: 2730 x 27 x 0.90 mm Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangular: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Cutting capacity at 45° rectangular: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight approx.: 0.3 t Space requirement approx.: 1.6 x 1 x 1.7 m High-quality metal band saw with 2 band speeds, mitre cut up to 60°, automatic coolant system, and AutoCut feed system – for cutting solid material and profiles. Design features * High-quality manufactured and equipped metal band saw for top-quality cuts * Suitable for cutting solid material and profiles of steel, stainless steel, and aluminium * Mitre cuts up to 60 degrees to the left * Saw band speed adjustable in 2 steps * Frame and gearbox constructed in one casting, very quiet and low-vibration cutting * Easy and clear mitre adjustment with scale * Quick-release vice with quick-clamping lever for easy handling * Length stop * Saw band guide made from carbide Iaodpfx Aajhhzl He Njl * Electrical monitoring of band tension, band breakage, and saw band cover. The saw will only run if no fault is detected. * Ergonomic industrial handle * Electric automatic coolant system * AutoCut system with hydraulic cylinder, feed regulation, spring package and end switch * Large machine bed * Base frame in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via hydraulic cylinder with continuously adjustable feed and automatic end-stop at end of cut. * Rapid lowering of the saw frame from rest position to the workpiece, then switching to normal feed (e.g. for marking). * Manual mode: The hydraulic cylinder acts as a brake cylinder (e.g. for notching). The brake cylinder allows the saw to be positioned at any point during return stroke.

Kondisi: baik (bekas), Tahun pembuatan: 1984, 24126 Motorized Solid Bar Twisting Machine + Ring and Arch Bending Machine Technical Specifications: - Bending process motorized, with automatic or manual operation - Bending capacity for square steel (ST 37) up to approx. 30 mm - Bending capacity for flat steel (ST 37) up to approx. 30 x 8 mm - Adjustable bending length between twisting units up to approx. 1200 mm Iaodpfsr Ik N Dex Aa Nol - Minimum twisting length: 10 x material thickness (long side) - Preselection for bending time and twisting length - Right and left-hand rotation - Tailstock - Arch and ring bending attachment GRB 66 with various roller sets - Bending performance: - Flat steel 60 x 10 mm (vertical): min. radius 700 mm - Flat steel 70 x 12 mm (flat): min. radius 500 mm - Round pipe 1 ½” x 2: min. radius 800 mm - Square tube 40 x 40 x 3: min. radius 1500 mm - Angle 45 x 6: min. radius 600 mm - Round pipe roller sets: steel 1 ¼”, plastic 1 ½” - Standard roller set - Space requirement: approx. W 1850 x H 1300 x D 700 mm - Drive: 400 V / 2.2 kW - Weight: approx. 250 kg

Kondisi: baru, Cutting range: Round 0°: 170 mm Square 0°: 150 x 150 mm Flat 0°: 150 x 190 mm Round 45°: 125 mm Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H), approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow pivotable up to 45° - Two band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profile material and solid materials made of stainless steel, iron, etc. Iedpfx Aajilk H Te Noal - Generously sized saw arm for low-vibration operation - Saw arm lowering by hydraulic cylinder - Low noise due to robust construction - Automatic shut-off after cutting cycle via micro switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Coolant system with pump - Includes base frame - CE/IEC certified, German documentation and German service Scope of delivery: - Bi-metal saw band 2080 x 20 x 0.9 mm, 6/10 TPI - Band tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off after cutting cycle - Base frame

Kondisi: bekas, Hans Schreiner MBS270 metal band saw, good condition, 1.5 kW, 2450 mm band length, 227 kg Isdpfx Ajwzzgnja Njal Prices subject to change. Errors, misprints and typographical mistakes excepted.

Kondisi: baru, Tahun pembuatan: 2024, Manual band saw for cuts from 0° to 60° to the right. Isdpfx Aaogculvo Neal Hydraulic blade tensioning, bow handle with control button. Combination blade guide with side bearings. Carbide cutting inserts and an upper bearing. Manual cutting or, alternatively, cutting without operator using the bow’s own weight, regulated by hydraulic brakes; afterwards, the bow is returned manually to the desired position. Manual vise for quick and precise clamping of the workpiece. Swiveling of the bow from 0° to 60° to the right with locking positions, precise angle measurement, manual vice with quick-release lever. Millimetric graduated scale bar. Coolant tank integrated at the top of the machine base with a drain nozzle and electric coolant pump for lubrication on both sides of the saw blade guides. Control voltage: 24 VAC, main switch, and control system. Maximum current and short-circuit protection. Supply voltage: 400V/50Hz/3Ph standard. Machine color: yellow RAL 1018 and gray RAL 7036. You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us regarding this. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2025, New machine. Please inquire for the current daily price and delivery time. Isdporah S Hefx Aa Nsal Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Connection voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Capacities: Cutting capacity 0° round (solid material): 355 mm Cutting capacity 0° square (solid material): 300 mm Cutting capacity 0° rectangle vertical (solid material): 300 x 490 mm Cutting capacity -45° round (solid material): 290 mm Cutting capacity -45° square (solid material): 250 mm Cutting capacity -45° rectangle vertical (solid material): 250 x 250 mm Cutting capacity +45° round (solid material): 350 mm Cutting capacity +45° square (solid material): 290 mm Cutting capacity +45° rectangle vertical (solid material): 290 x 340 mm Cutting capacity +60° round (solid material): 230 mm Cutting capacity +60° square (solid material): 180 mm Cutting capacity +60° rectangle vertical (solid material): 180 x 220 mm

Kondisi: baik (bekas), Tahun pembuatan: 2001, Trennjaeger TEBA 240 DG Round cutting capacity: 240 mm Rectangular cutting capacity: 230 x 230 mm Motor power: 1.5 kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre cuts: 90° / -45° / +45° / +60° Iaedpju Ekw Njfx Aa Nol Cutting speed: 40/80 m/min.

Kondisi: bekas, Tahun pembuatan: 2002, Cutting diameter: 210 mm Cutting capacity at 90 degrees (flat): 270 x 200 mm Cutting capacity at 90 degrees (square): 200 mm Cutting capacity at 45 degrees (round): 180 mm Cutting capacity at 45 degrees (flat): 180 x 190 mm Cutting capacity at 45 degrees (square): 180 mm Vise width: 200 mm Speed range: 36/72 m/min Saw blade dimensions: 2750 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 0.35 t Space requirement approx.: 0.95 x 1.7 x 1.9 m Iaodswkvqtspfx Aa Njl Bandsaw machine equipped with: - Cut-Control system - Double mitre facility 45° right and left - Mitre adjustment via rotary table - Coolant system