Tekan pneumatik

BERG & SCHMID PND 45/S

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, suhu: 60 °C, kapasitas angkut: 250 kg, SUMMA DC3/OSK rotary basket – rotary drum cleaning system, carousel degreasing unit with dryer The chamber rotation machine from the Czech manufacturer operates on a pressure spray principle. The degreasing system offers three surface cleaning combinations and is suitable for surface degreasing of a wide variety of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770 x 500 mm Psdpfxewty H Ds Al Ijpr Max. workpiece weight: 250 kg Electrical power: 23 kW Bath temperature: max. 60 °C Air temperature: max. 120 °C Bath heating (rinsing): 12/6 kW Hot air drying: 13.5 kW Aerosol pressure: 0.28 MPa Pump capacity: 70 litres/minute Machine weight: 520 kg Machine dimensions: 1800 x 1800 mm Height: 1500 mm Do you need further information? We are happy to assist you! Please contact us via the contact form or give us a call. This listing was automatically translated. Translation errors may be possible.

Kondisi: bekas, de-to-it-lt-lv-t1 Ppodpfx Alju E U Ufe Isr

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 350 mm, Layar digital 3-sumbu Spindel frais horisontal dan vertikal Pinol Data teknis: Ppsdswyit Hjpfx Al Ier Pergerakan memanjang X: 450 mm Pergerakan melintang Y: 300 mm Pergerakan vertikal Z: 350 mm Ukuran meja: 800x400 mm Taper spindel: SK40 Kisaran putaran: 50-2500 rpm Kisaran feeding: 8-400 mm/menit Daya motor: 3,2 kW Berat mesin: 1500 kg Data teknis, aksesori, dan deskripsi mesin tidak mengikat.

Kondisi: bekas, Tahun pembuatan: 1997, druck-40-t Ppjdpfevuuckox Al Ijr

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: from 95 to 240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force over the entire stroke length. They are primarily used when processing long-stroke parts with consistent force is required. Convincing technology: • Long and precise spindle guidance ensures maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life Pedpfx Alofv Awae Ijpr • Double-acting cylinders with end position cushioning on both sides • Double guide rings on the piston for smooth and consistent running • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against twisting • For the PND 85/S, spindle return is effected via only one cylinder chamber—providing additional air savings • Working height fine adjustment is simple, quick and precise in 2 stages: – Basic adjustment by loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and air savings.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray rotation cleaning system type TR450 is an automatic cleaning and degreasing machine equipped with an easy-to-open upward lid. The unit is designed for cleaning individual parts and/or bulk material in baskets sized LxWxH 520x320x200h mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on ensuring a gentle agitation of parts within the basket when dealing with bulk material; the fill level in the basket must therefore be observed. Additionally, the system is equipped with a flood tray beneath the product basket, allowing for immersion scooping of the parts for even better cleaning results. Ppjdpfx Asfbt Sijl Ijr Including the following features: • Complete internal and external construction in stainless steel 1.4301 • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (capacity: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable closure lid Connected load: approx. 20 kW (32 amp plug)

Kondisi: bekas, 1 Ppodpfxjw Rdkts Al Ier

Kondisi: bekas, Tahun pembuatan: 2007, Press force 100 t Stroke 500 mm Table dimensions 900 x 600 mm Rapid traverse 22 mm/s Stroke speed 2 mm/s Ppjdpjvprv Rofx Al Isr Ram surface 700 x 350 mm Total power requirement 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press The machine is an Italian brand, SICMI, distributed by Knuth.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE Compliant! Technical Specifications: >> Year of manufacture: 2015 Machine No.: 610398 >> Milling table clamping surface: 800 x 425 mm Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Max. table load: 300 kg >> Spindle speed range: 1-4500 rpm >> Infinitely variable feed: 0-2000 mm/min >> Rapid traverse X and Y axes: 5000 mm/min Z axis: 4000 mm/min >> Travel X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx.: 2025 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: AC three-phase motor Rated output at 100% duty cycle Pedpfjwz Eu Nsx Al Ijpr Equipment and Accessories: >> Heidenhain TNC 128 control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication system >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the Machine: For sale is a Kunzmann WF 600M tool milling machine equipped with a Heidenhain TNC 128 control unit. The TNC 128 offers a wide range of dialog-guided cycles with graphical simulation for fast and simple data input, e.g.: various drilling cycles, tapping, bolt circles, linear hole rows, rectangular pockets, rectangular tenons, and face milling patterns. This universal milling machine is in like-new condition. The control unit is extremely user-friendly. In addition, the machine features hydraulic clamping systems for both vertical and horizontal operation. Conversion from vertical to horizontal is very straightforward by simply tilting away the vertical head. The guides are automatically lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann under power at our facility.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table dimensions: 650 x 650 mm Ram diameter: 140 mm (round) Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Ppjdofcw Apepfx Al Isr Width: 1,100 mm Depth: 1,500 mm