5271 - BALER KERTAS BERGMANN

Bergmann PS 8100-L

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 20.536 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat kosong: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: – 30 kg/m³: approx. 6.0 t/h – 50 kg/m³: approx. 10.5 t/h – 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special equipment: – Wear-resistant floor made of HARDOX steel – Special press ram for compacting "difficult" materials and loose bulk goods with small grain size – Control cabinet climate control – Machine foot raising by 200 mm Pedpfou Thypox Ab Iegw Note: The machine is currently in our workshop and undergoing partial refurbishment. We expect the refurbishment to be completed by the end of October, after which the machine will be tested and released for sale.

Kondisi: baru, GENERAL Pgedpjghgdvsfx Ab Ijw The ZIS series single-shaft shredders are characterized by their spacious cutting chambers, which owe their strength to robust, welded steel construction. The rotor diameter is a generous 457 mm, with rotor widths available at 1200, 1500, and 2000 mm. The ZIS series retains all advantages of the ZSS series: oversized gearbox drive, reversible cutters, bolted knife holders, rugged external bearing assemblies, hydraulic screen basket, easy handling, and state-of-the-art control systems. APPLICATIONS The ZIS series was primarily developed for bulky hollow products such as IBCs, waste bins, pallets, rain barrels, and similar items. Additionally, the machine can be universally used across a wide range of applications in the plastics and wood industries. As with all Zerma shredders, the ZIS series machines can be equipped with various wear-resistant options. ADVANTAGES - 35% larger cutting chamber volume compared to the ZSS series - Internal hydraulic ram - Increased ram return speed - Compact dimensions - Knife holders bolted into rotor pockets

Kondisi: bekas, Casing-In / Buch-Einhängemaschine - Buchformpresse / Book Forming Press Kolbus EMP - FE Year of manufacture: 1966 Block size: min. 125 x 100 x 6 mm / max. 370 x 270 x 80 mm Case size: min. 125 x 210 mm / max. 370 x 62 mm Performance: up to 36 cycles per minute Online video inspection via WhatsApp, MS Teams, Zoom, or Telegram In stock in Emskirchen/Nuremberg - Immediately available - Can be tested Pgedpfx Aevuaqyeb Iow

Kondisi: belum diuji (bekas), Hydraulic press for compacting paper and similar materials. The machine was fully operational prior to disassembly. Psdpfx Abeh Nyfys Iogw Press dimensions: Length: 4850 mm, width: 1370 mm, height: 3000 mm (can be reduced to 2300 mm). Weight approx. 3500 – 4000 kg. For further information, please contact: +48 539 660 495.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Pgjdpfx Asvwlqqjb Iow Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Tahun pembuatan: 1982, Kondisi: baik (bekas), nomor mesin/kendaraan: 14320, BALER / PAPER BALER Psdpfx Abjiuky Ie Isgw

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, daya: 1,5 kW (2,04 hp), Tria plastic mill, shredder, granulator in excellent condition for sale Pgjdsra N A Nspfx Ab Isw Make: TRIA 20-15/BL-T Power: 1.5 kW, 50 Hz, 380 V Year of manufacture: 1997 Feed opening: 200 x 230 mm Rotating knives: 3 pcs Fixed knife: 1 pc Discharge opening: 60 mm Final product size: 3–5 mm Throughput: approx. 30 kg/h.

Kondisi: baik (bekas), Tahun pembuatan: 1987, Manufacturer Model: PS 8100 Height: 2,200 mm Width: 1,200 mm Length: 1,625 mm Loading height: 1,900 mm Weight: 800 kilograms Pgodpfsk E Hh Ssx Ab Iew Rated current at 400 V: 4.8 A Transformer rated current at 230 V: 0.38 A Motor power: 2.2 kW Fuse: 10 A, slow-blow Rotation: 13 rpm Protection class: IP 54 Fire class: D, E Hydraulic oil: HLP 32 Bale weight (depending on material): 150-400 kg Bale volume: 1 m³

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Connected load: 15.5 kW, weight: 6.8 t. Psdpfsip D Rzex Ab Ijgw

Tahun pembuatan: 1973, Kondisi: bekas, Waste compactor container, garbage compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary press for: roll-off containers - Feed chute: covered - Pressing operation: hydraulic Psdpfjb A Ii Ssx Ab Iegw - Pressing operation: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for skip containers - Function tested