Pusat permesinan 5-sumbu

BIESSE + KUKA ROVER A + KR210 R3100

Kondisi: bekas, nomor mesin/kendaraan: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Working surface: With vacuum console supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool stations: 16 Kdjdpfjwuz N Nex Afiek

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 Kdsdexy Tmnopfx Afijk All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2005, Ukuran pemrosesan: 3000 x 1600 x 180 mm Pompa tekanan tinggi 60 HP / 45 kW Model E-60 Tekanan kerja 4.130 BAR Konsumsi air 4,69 liter/menit Perangkat lunak: Watercad-CAM Optimalisasi pemotongan otomatis Lokasi penyimpanan: pelanggan Kodpjxgfbqefx Afijdk

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): Ksdpfjgwbbqox Afiedk No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems Ksdpfxex D H Hcs Afiedk • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.670 mm, jarak gerak sumbu Z: 500 mm, jumlah sumbu: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and a C-axis rotation of 0–360°. The machine is equipped with a 12-position linear tool changer and a comprehensive drilling head with 16 spindles. Additionally, it offers a robust safety system with a light barrier. Take advantage of this opportunity and purchase this Felder Format 4 Profit H 200 CNC machining center. Contact us for further details on this machine. • Automatic central lubrication • Working area: X 3,300 mm / Y 1,280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operator terminal on the left side of the machine • Hand-held terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction cups Ksdpfx Aex D D Hmsfiodk • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including holder for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); advance stroke 70 mm; drilling depth 70 mm; shank Ø 10 mm • Grooving saws: 2 (one X, one Y); max. blade Ø 120 mm; max. thickness 5 mm; infinitely variable speed up to 7,500 rpm • Safety: Front-side light curtain system

Kondisi: bekas, Pusat pemesinan CNC BIESSE Rover C 6.50 CONF.2, tahun 2007 Area kerja: sekitar 140 × 460 cm Dimensi mesin: 300 × 650 cm Berat: sekitar 6.100 kg Dua kepala kerja Majalah alat: 22 posisi Kedpfx Aow Rpd Sofiedk Spindel bor vertikal: 28 pcs Spindel bor horizontal: 12 pcs Harga dapat dinegosiasikan, tersedia segera. Harga belum termasuk PPN.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a rigid gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. The machine is equipped with an HSK-F63 tool holder system, a 12-position rotary tool changer, and a BIESSE BH 10 boring unit offering extensive vertical and horizontal drilling options. Additional features include a grid vacuum table, two 500 m³/h vacuum pumps, and compatibility with DXF files. Contact us for more information about this machine. • Weight (kg): 3000 • Main spindle: 1 spindle, 13.2 kW • Axes: 4 • Working area (X × Y): 3765 × 1560 mm • Torque support: 4th axis (C-axis rotation) • Tool holder system: HSK-F63 • Tool changer positions: 12 (rotary changer) • Tool length measurement: Yes Kdodpfx Aox D Iqvefijk • Boring unit: Vertical drills: 10, Horizontal drills: 4 (X-direction), 2 (Y-direction) • Grooving saw: In X-direction • Vacuum table: Grid table • Vacuum pumps: 2 × 500 m³/h • Extraction system: Cleaning-arm discharge unit • Lubrication: Automatic • Air blow device: Yes • Control system: Interface with DXF file compatibility • CE marked: Yes • Tools, tool holders, aggregates, and mechanical clamps shown in the photos or videos are not included in the scope of delivery.

Kondisi: sangat baik (bekas), HOMAG BOF 211 – CNC machining center with 4-axis technology Reliable CNC machining center with comprehensive features and in exceptionally good condition ⸻ Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Travel paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools Kdsdpexk Tumefx Afijk • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix-nest or console table • Optional: edge banding and labeling ⸻ Features • Dimensionally accurate and repeatable processing • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior construction ⸻ The machine is available immediately. Disassembly and transportation can be handled by our service team upon request. ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT, subject to change and errors.

Tahun pembuatan: 2009, Kondisi: sangat baik (bekas), KUKA KR30-3 C KRC2 ED05 Kdjdpfxsifgvys Afijk including control panel, cables, and control cabinet. 26,000 operating hours We are also happy to offer you the robot as a fully refurbished unit!