Gergaji Panel

BIESSE EB75

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Bedpfjgtm U Aex Aa Tswi Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Bwedjlht Hzspfx Aa Tei

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Bwjdpfx Ajg Tu Rkea Tei Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baru, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" configuration - Control console "eye-S" (control panel) Bodpfx Aajwkf Ihe Tjwi - Human-Machine Interface software (HMI) "Maestro active edge" - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and edging area - "Nesting" tracing rollers - Release agent spray unit "AAR" 1 - Edge finishing spray unit - Spray device for sensitive edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Bevel and radius trimming unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, automatic straight/R/R positioning, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is brand new and still in its original packaging. Promotional machine offered at a special price.

Kondisi: bekas, nomor mesin/kendaraan: 007913, typ-der-angebrachten-kante Bwjdpfjwkf Dvox Aa Tei

Kondisi: bekas, Tahun pembuatan: 2016, Vitap Eclipse Kantenanleimmaschine für runde und gebogene Werkstücke Halbautomatische Kantenanleimmaschine zur Bearbeitung großer runder oder gebogener Werkstücke mit einer Plattenstärke von 10 bis 60 mm und einer Banddicke zwischen 1 und 3 mm. Die maximale Plattenhöhe von 60 mm ist nur bei einer Kantenstärke von 1 mm möglich. Bei größerer Bandstärke ist dies abhängig von der Bandqualität und sollte im Zusammenspiel mit der Schneideinheit vorab getestet werden. Ausstattung: - Zwei Kopierrollen zum Abtasten der Werkstückkontur - Leimstation - Leimbecken mit einem Fassungsvermögen von 1 kg - Zwei 800-W-Heizelemente mit elektronischer Temperaturanzeige über die SPS-Steuerung - Leimauftragung über Leimwalze - Leimbecken aus Aluminium für eine optimale Wärmeverteilung - Leimzulauf regulierbar per Knopfdruck - Automatische Schneideeinheit für Kantenmaterial von der Rolle von 3 bis 45 mm - Aggregat wird entweder durch Sensor für geschlossene Kantenumleimer mit perfektem Anschluss oder durch Encoder bei einseitiger Anleimung aktiviert - Lasersystem zur Längenermittlung – kein Vormessen erforderlich - Durchlauffunktion ein- und ausschaltbar - Höhenverstellbarer Tisch für schmale Platten - Fräsaggregat ein- und ausschaltbar Bjdpfx Aaowgb Hxj Towi - Zwei Kopierrollen zum Abtasten der Werkstückkontur - Fräsaggregat ausgestattet mit 2 x 0,5 kW (15.000 U/min, Hochfrequenz) mit Ober-, Unter- und Front-Kopierrollen - Fräsaggregat mit Messern R=2, Phase 15°, D=69, Z=6 - Große Plattendreheinrichtung mit Vakuum zur Produktfixierung (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers 90° turning device for panels 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Bjdpoukhd Asfx Aa Towi Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions

Kondisi: baru, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table size: 1100 x 735 mm Sliding table: 3200 x 400 mm Ripping length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port Ø: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor intake power S6 40%: 7.5 kW (10.0 HP) Scoring unit motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Bodpfx Aed N S T Dja Towi Scope of delivery • Electrically adjustable saw blade height • Digital cutting height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal stop flaps • Support table with roller • Push stick • Independent scoring unit with dedicated motor • Operating tools Features • Powerful main drive motor (5.5 kW) with high torque, optimized for top cutting performance • Easy-running double roller carriage with central and end-position locking for precise cuts • Max. saw blade diameter 400 mm for cutting heights up to 125 mm • Support table with roller for easier handling of large workpieces • Fold-down rip fence with micrometric fine adjustment (advantage for large panels) • Standard independently driven scoring unit (motor power 0.75 kW) • Rigid saw assembly with double-sided guided tilt elements in cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously tiltable from 90° to 45°

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder Bwodjl Rix Eepfx Aa Tsi -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Bwedpfsg A D Anox Aa Toi Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm