Mesin pengikat tepi

HEBROCK F2 - sofort verfügbar -

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment Tsdpfxsi Am U Ds Aaieb (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Tedeg Tu Rkepfx Aaisb Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, daya: 5 kW (6,80 hp), ketinggian potong (maks.): 200 mm, lebar pemotongan (maks.): 1.300 mm, diameter mata gergaji: 550 mm, panjang pemotongan (maks.): 3.200 mm, lebar potong di pagar rip: 1.300 mm, panjang meja geser: 3.200 mm, Exhibition machine F 45 Elmo Drive - Tilting +/- 45° - Cutting height 200 mm - Scoring unit preparation No. M24038 - Double roller carriage with 3200 mm - Mitre angle stop 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual Tedpfsuh R R Esx Aaijb - Template holder - On/off switch on the double roller carriage - Front support roller

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Todpfxog A D Ane Aaiob Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue pot with run-off function optional), HF end trimming station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated distance control for contactless activation of processing functions. Suitable for ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying • 3 free spaces for finishing units • 10" color touchscreen. Machine length: 4,030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0 – 2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Todew I U Drepfx Aaieb Pneumatic connection: 6 bar Net weight: 1,050 kg Options: • Surcharge for radius scraper unit with air blast device + extraction • Surcharge for flat scraper unit + extraction • Surcharge for buffing unit • EVA/PUR glue pot with run-off function • Surcharge for diamond tools, height = 65 mm for pre-milling unit • Riepe spraying system (anti-adhesive) at pre-milling unit • Riepe spraying system (cleaning spray before buffing unit) • Piping system with 90° bend + manual slide valve, mounted on the machine with D=200 mm Availability: short notice Location: Hochheim

Kondisi: baru, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table size: 1100 x 735 mm Sliding table: 3200 x 400 mm Ripping length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port Ø: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor intake power S6 40%: 7.5 kW (10.0 HP) Scoring unit motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electrically adjustable saw blade height • Digital cutting height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal stop flaps • Support table with roller • Push stick • Independent scoring unit with dedicated motor • Operating tools Features Todped N S T Defx Aaieb • Powerful main drive motor (5.5 kW) with high torque, optimized for top cutting performance • Easy-running double roller carriage with central and end-position locking for precise cuts • Max. saw blade diameter 400 mm for cutting heights up to 125 mm • Support table with roller for easier handling of large workpieces • Fold-down rip fence with micrometric fine adjustment (advantage for large panels) • Standard independently driven scoring unit (motor power 0.75 kW) • Rigid saw assembly with double-sided guided tilt elements in cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously tiltable from 90° to 45°

Kondisi: bekas, Tahun pembuatan: 2022, en Todpfoy S U Dusx Aaiob

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module Tjdpfx Aol Rix Eeaisb • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Kondisi: baru, Tahun pembuatan: 2024, Martin Dicken Planer T 45 with Tersa Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers smoothly planed surfaces, is fast and simple to operate, and runs extremely quietly. The standard electronic control makes setting the planing height effortless thanks to 99 storable planing dimensions, ensuring the very first workpiece fits perfectly. Of course, the thickness table is electrically adjustable at the push of a button, and can be fine adjusted in steps of 0.1 mm upwards. The feed speed controls are easy to reach and operate ergonomically. The heavy, vibration-damping composite frame combined with the high-quality planing head bearings guarantee outstanding surface results. Thanks to its soundproofed design, even the standard model operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Rotation speed: 5,000 rpm • Operation: Single-axis control for planing dimension, up to 99 values storable, 49 of which usable for a freely programmable planing sequence; pushbuttons for manual rapid and fine thickness adjustment with digital display, pushbutton for cutterhead start/stop, integrated hour meter • Cutterhead: TERSA solid steel cutterhead Z4, Ø 125 mm; including lock for easy knife change • Thickness table: Electrically adjustable with fine adjustment, table movement speed 10 mm/s, securely mounted on 4 supporting spindles, superbly planed table surface • Feed system: 2 speeds, 6 / 12 m/min, selectable electrically even during planing; large 85 mm diameter rubber feed rollers for compensating varying wood thicknesses, gentle on materials and self-cleaning, easy roller exchange; segmented infeed pressure bar • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable left or right (optionally both sides in special cases); minimum extraction volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication bar for oil-lubricated points; bearing/cutterhead lubrication via nipples • Accessories: 1 grease gun pre-filled with long-term grease 1 oil can 1 open-end wrench 1 tool for knife changes 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emissions: Tjdpfxjqlckpj Aaiob Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] No-load (without extraction) P1 65 No-load (with extraction) P1 77 Operation (without extraction) P2 65 Operation (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] No-load (without extraction) 84 Operation (with extraction) 90 Dust emission: low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Tahun pembuatan: 2023, Kondisi: baru, nomor mesin/kendaraan: 23-04-35-001, F 25 version 3 manual height and tilt adjustment 0 - 46° of the saw blade with digital display. Tjdpfx Aajf A Ehtjiob Motor 5.5 kW, 2 speeds 3,600 / 4,200 rpm. Double roller carriage 3200 mm, Parallel fence incl. fine adjustment and DIGIT X (digital display of cutting width) Cutting width 1000 mm, Angle mitre fence, crosscutting up to 3450 mm, Scoring unit Basic with LED light Max. saw blade diameter 315 mm, max. saw blade protrusion 104 mm, Max. cutting height 100 mm, at 45° max. 70 mm, Large extraction hood (PSV), incl. option with front support roller, available immediately from stock in Seevetal, subject to prior sale without transport, assembly and commissioning