Mesin pengikat tepi satu sisi

BIESSE NEW STREAM A 6.5

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, manufacturer: Elumatec Model SA/ SAS 142 overhauled: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2800 rpm Saw blade cutting speed (500mm): 4400 m/min Saw height adjustment: stepless, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 150 mm Pneumatic feeding length: 5-560, 10-1120 mm Compressed air connection (site): 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900mm x 1400mm x 1500mm Footprint LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in as-new technical and optical condition following completion of the retrofit. The machine will be fully overhauled in our workshop according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - New electrical components - New pneumatic hoses - Maintenance or replacement of all pneumatic cylinders and valve terminals - Minimum lubrication system maintenance - Replacement of general wear parts - Refurbishment of safety enclosure/cabinet Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Options: - Expansion of cutting range (flat 90° max.: 300 x 120 mm) - Chip breaker expansion (for high-quality cut surfaces without return marks) - Servo-driven material feed - Servo-driven saw blade feed - Quick clamping device for rear feed stock - Delivery and installation at your location - Training of your staff Gbjdpfxouiy Nyj Alksl

Kondisi: bekas, nomor mesin/kendaraan: 007687, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multifunction unit: yes Max. feed speed: 18 m/min Godpfx Aljwuz Npokebl Maximum panel thickness: 60 mm Working units: 7 pcs

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) Gsdpoqt Dmyjfx Alkobl - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: A1711012, en-001 Gbjdpfju U Ryyox Alkjl

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) Gedsxy Tmnspfx Alkebl MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: P 04-09-002, neu U05 10 001, Automatic Spray Machine Venjakob HGS-K All images are sample images only. - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (expandable to 1000 mm) Gbedpjumvr Tjfx Alkel - Current condition: not refurbished - Offer price refers to refurbished condition - Operator side: right - Dual-drive system for gun carriage - Dry extraction: 4,000 m³/h - Extraction port diameter: 400 mm - Conveyor belt transport system - Feed speed continuously adjustable from 3 to 8 m/min - With paint recovery system - Gun control: LS 1 - Installed paint circuits: 1 pc - Airless spray system: 4 units Krautzberger KAA 1300 - Number of paint pumps: 1 pc - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current consumption: 17 A, fuse protection: 35 A - Location: in stock - Voltage fluctuation tolerance max. +/- 5% _____ Optionally, we can also provide you with a quote for the assembly and commissioning of the system, as well as training for your staff. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Kondisi: sangat baik (bekas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.4 / 3 Edge thickness in strips (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Pressure belt driven (C.N.) Spraying unit (for liquid anti-adhesive) AAR Adjustable stop ruler, C.N. controlled "EASY SIZE PLUS" Jointing unit 2 x Kw Radiator for edge warming Gluing unit (P.U.R. glue + pre-melter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (C.N.-controlled) Edge magazine for rolls - 1 Cut-off unit K/SEL Pre-milling unit RS/K Milling unit RI/800 (3 pos.) Multi-function unit (radius and profile milling unit) "4 EDGE" KIT Spraying units (for sliding fluid) Profile scraper unit RAS/1000 Flat scraper unit RCA/2C Universal milling unit for grooving/rebating and profiling K-100 (1 x Kw 1.8) 90° Hot air radiator - edge trimmer Gbsdpfsxlqntjx Alkel Return direction "SAG" Mod. SPINNER 47 / 63

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) Gsdpfx Aogwbbqelksbl No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de-Nanxing NPC330 ist eine Hochleistungs-Plattensäge für das schnelle und präzise Schneiden von MDF, Spanplatte, Sperrholz und anderen holzbasierten Plattenwerkstoffen. Sie ist die ideale Lösung für Möbelhersteller, die hohe Durchsatzraten und gleichbleibende Präzision fordern. Der Sägewagen wird über einen 2-kW-Servomotor mit Zahnstangenantrieb bewegt und erreicht Schnittgeschwindigkeiten bis zu 90 m/min sowie Rücklaufgeschwindigkeiten bis zu 120 m/min. Die leistungsfähige Software umfasst Schnittoptimierung, Prozessmanagement, Schnittsimulation, Fehleranzeige und automatische Etikettierung zur effizienten Produktionsverfolgung. Hauptmerkmale - Schnitthöhe: bis zu 120 mm - Schnittbreite: 3270 mm - Automatischer Druckbalken passt sich der Gesamtstapelhöhe der Platten für maximale Effizienz an - Luftgeschwenkter Auflagetisch für kratzerfreies und einfaches Plattenhandling - 10 pneumatische Spannzangen (optional 12) für sichere Fixierung und präzise Positionierung - Servoseitige Ausrichtung für absolut rechtwinklige Schnitte - Vollständiges Schutzsystem: Handschutz für Bediener, deckender Blattschutz, optionaler Sicherheitszaun & Lichtschranke - Schnellwechsel-Hauptsägeblatt und werkzeuglose Vorritzereinstellung Gedpfxexcwwpj Alksbl - Automatisches Schmiersystem für längere Lebensdauer und geringere Wartungskosten - Schaltschrank mit Markenkomponenten, 21,5"-Touchscreen, Industrie-PC (i5 CPU, 8 GB RAM) Technische Daten - Max. Schnittlänge: 3270 mm - Max. Schnitthöhe: 90 mm (optional 120 mm) - Hauptsägemotor: 15 kW (optional 18,5 kW), 3910 1/min - Vorritzermotor: 4300 1/min - Hauptsägeblatt: Ø380 mm (Bohrung Ø60 mm) - Vorritzer: Ø200 mm (Bohrung Ø45 mm) - Vorschubgeschwindigkeit: 90 m/min (Rücklauf 120 m/min) - Gesamtanschlusswert: 24,2 kW - Maschinenabmessungen: 6900 × 5400 × 1820 mm - Gewicht: 4.560 kg - Anschluss: 380V / 50Hz / 3-phasig - Druckluftbedarf: 0,6 MPa - Absaugung: Ø150 mm × 3, min. Strömungsgeschwindigkeit 28 m/s Vorteile für Hersteller - Hohe Produktivität: Paketschnitt mit hoher Vorwärts- und Rücklaufgeschwindigkeit - Hervorragende Präzision: ±0,03 mm durch massive Rahmenkonstruktion und pneumatische Spannzangen - Digitale Optimierung: AutoCut-Software zur Minimierung des Verschnitts und optimaler Zuschnittplanung inbegriffen - Maximale Sicherheit: vollflächige Schutzverkleidung, Lichtschranke und Not-Aus - Bedienerfreundlich: Lufttisch und servogesteuertes Vorschubsystem für müheloses Plattenhandling

Kondisi: baru, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" configuration - Control console "eye-S" (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and edging area - "Nesting" tracing rollers - Release agent spray unit "AAR" 1 - Edge finishing spray unit - Spray device for sensitive edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Bevel and radius trimming unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, automatic straight/R/R positioning, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is brand new and still in its original packaging. Gbodpfxowkf Ihe Alkel Promotional machine offered at a special price.