Pita tepi

Brandt Optimat KDN 330

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Psdsxya Rtopfx Abuopl Equipped with pre-melter unit for hot-melt adhesive granulate Adhesive reservoir located below the glue roller Application of glue to the workpiece via adhesive roller, both in co-rotating and counter-rotating mode Automatic edge magazine for roll material and fixed lengths Pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compressing upper and lower glue joints Centrally adjustable upper pressure Central manual lubrication of chain track Control panel at machine infeed End trimming unit for front and rear edge overhang; highly precise linear guides 2 motors of 0.18 kW each Tilting range for straight and bevel trimming: 0–15 degrees Flush trimming unit top and bottom with vertical and horizontal tracing Tilting range 0–15 degrees with 2 milling motors with combination of straight/radius reversible knives Digital counters allow for quick and precise—i.e., repeatable—settings Two-point pneumatic adjustment of top and bottom milling motors Scraper unit for finishing, with horizontal and vertical tracing Extendable workpiece support up to 350 mm Integrated control system for contactless management of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short-term Stock location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2016, Power Touch control (touchscreen system) with 21-inch full HD display Panel thickness: 60 mm PVC/ABS: up to 3 mm Solid wood: up to 12 mm Feed speed: up to 20 m/min Working height electronically adjustable (NC) Panel support guide with idle function Side roller track with idle rollers for panel support Anti-adhesive unit Twin-motor straightening unit Roller holder plate EVA glue application unit with pre-melting unit and glue pot Edge pressure unit for straight profiles with automatically adjustable pressure rollers (NC) End trimming unit with automatic angle adjustment Twin-motor chamfering unit with adjustment Twin-motor multifunction round unit (chamfering + rounding) Edge scraper unit with electronic NC adjustment Glue scraper unit Pjdpfowwtpyex Abuspl Brush unit Anti-adhesive unit

Kondisi: sangat baik (bekas), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (60 Sh roller, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Ppjdexqggcjpfx Abusl Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extensions with 2 rollers, front and rear Sanding shoe inserts lined with new graphite cloth Including as-new sanding belts Incl. all documentation Note on used machinery: • Subject to errors in technical specifications and prior sale. • Quoted prices are ex-location – loaded free of charge! • The machines have been cleaned and functionality tested. • All machines are sold as inspected, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines on-site. • Special agreements are only valid if made in writing. (We only respond to inquiries stating your address and telephone number!)

Kondisi: baru, Tahun pembuatan: 2025, New machine Year of manufacture: 2025 Description: Pjdpow Tfybsfx Abujpl Technical Specifications Working width: 630 mm Worktable dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. cutting depth per pass: 8 mm Min. workpiece length: 260 mm Cutter block diameter: 120 mm 4 knives: 35 x 3 x 640 mm Cutter block speed: 4500 rpm Feed speed, electronically adjustable: 4–20 m/min Feed motor (S6 - 40%): 1.3 kW Extraction port diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table lift with 2 speeds and micrometer positioning - Thickness table with vertical movement via 4 high-precision steel spindles - Electronic 2-axis control system for: * programmed thickness table dimension * feed speed - Infinitely variable feed speed from 4 to 20 m/min regulated electronically via inverter - Automatic feed speed adjustment relative to the main motor's maximum power consumption - Upper ribbed steel infeed roller - Two upper rubber-coated outfeed rollers - Interchangeable feed rollers - Independent pneumatic pressure adjustment for upper feed rollers - Motor output 9 kW 50Hz (11 kW 60Hz) with automatic star-delta start: * S1: 7.5 kW / 10 HP at 50 Hz (8.8 kW / 12 HP at 60 Hz) * S6 - 40%: 9 kW / 12 HP at 50 Hz (11 kW / 15 HP at 60 Hz) Safety/Protection - Noise-absorbing protection at infeed and outfeed - Micro safety switch on the protective hood - Emergency stop at the front and rear of the machine - Lockable main switch - Motor protection switch - Low voltage circuit (110 Volt) - Automatic motor brake - EC Declaration of Conformity Production code: S 7 109999 Standard safety regulations 530314 TERSA cutter block (monoblock design) with reversible knives 083201 Base frame 930731 400V EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2015, Meja pemotong kaca otomatis bentuk bekas (jumbo), Intermac Tipe Genius 61 CT, tahun 2015 Pjdjxpia Nopfx Abujpl

Kondisi: bekas, 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residual materials such as wood, paper, plastic, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compression, the briquettes are transported directly to the heating system. Technical data according to manufacturer's brochure: - Output: 50 kg/h (depending on material) - Throughput: 0.45 m³/h - Briquette shape: octagonal, 125 x 70 mm - Motor power: 5.5 kW - Compaction ratio: 1:10 - Moisture content: min. 8%, max. 20% Sale on behalf of a customer, ex location near 69124 Heidelberg, without dismantling, transport, or installation. Dismantling, loading, and transport by us available as an option. Subject to errors in description and price. Psdswqhwlepfx Abuepl To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is. Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or previous owner, without guarantee. Interim sale reserved. For used machines, any warranty is excluded; the following applies: “purchased as inspected.” Pictures and videos are for reference only and do not represent the actual scope of delivery. Payment terms: Prices plus statutory VAT; payment prior to collection or dispatch. Delivery terms: ex location.

Kondisi: bekas, Holz Her Sprint 1312 FÜ + PU Desain berat - ketebalan tepi 0,4 - 12 mm Ppsdpfox Eilqsx Abujl Kontrol layar SPS Unit pra-pemotongan untuk persiapan sebelum pengeleman Majalah tepi otomatis penuh untuk material gulungan dan potongan Stasiun aplikasi lem: sistem cartridge + lem PU nozzle deteksi otomatis Tinggi benda kerja 6-55 mm Unit pemotong untuk gulungan dan potongan hingga ketebalan tepi 12 mm dengan penyesuaian kemiringan gergaji 0-10° Unit milling, milling rata hingga 12 mm, milling radius - chamfer milling - 15° MOT - 4 sumbu Unit pisau tarik untuk chamfer dan radius dengan 2 holder pisau tarik pneumatik penyambungan pneumatik masuk dan keluar Unit pisau tarik permukaan - finishing Sistem penyemprotan - PU Mesin dalam KONDISI SANGAT BAIK tersedia dari stok di Lieboch

Kondisi: bekas, nomor mesin/kendaraan: 008160, Jenis tepi yang terpasang: tepi tipis, tepi tebal Sistem perekat: EVA Ppodexqm Iyspfx Abuol Penyambungan frais: ya Unit multifungsi: ya Kecepatan maju maks.: 14 m/menit Ketebalan panel maks.: 60 mm Unit kerja: 7 unit

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, also known as a panel saw with scorer. It is an ideal solution for cutting and processing various materials, primarily wood, chipboard, MDF, and other wood-based panels. Construction and Design: Psdpfxotz Smie Abujpl The Cormak MJ45-KB4 is a robustly constructed woodworking machine featuring a durable steel frame for stability during operation. The large work table rides on hardened steel rods, with a carriage length of 3200 mm, equipped with cutting units to ensure efficiency and accuracy. Main Cutting Unit: Scoring Unit: A key feature of this saw is the scoring unit, which pre-cuts the underside of the board to relieve internal stress within the wood. This prevents splintering and reduces the likelihood of material deformation after cutting. The scoring motor’s power of 0.75 kW ensures reliable scoring performance. Main Saw Blade: The Cormak MJ45-KB4 panel saw comes with a primary circular saw blade powered by an electric motor, enabling precise cuts through various materials. With a blade diameter of 350 mm, the maximum cutting height reaches up to 105 mm. Manual Scoring Adjustment: The straightforward and effective manual adjustment of the scoring unit allows for quick and accurate setup. Index stops make it easy to return to previous settings, while the intuitively located adjustment controls allow operators to make changes without interrupting workflow. Panel Saw Features: Large Working Surface: Equipped with a spacious working area, this panel saw enables comfortable handling of large material sheets. Smooth Carriage Travel: The feeding system uses precision-hardened steel guides with steel ball bearings for effortless longitudinal cutting, even with large panels or plywood sheets. Angle and Depth Adjustment: The cutting angle and cutting depth can be easily adjusted, allowing customization for specific project requirements. Safety Systems: The panel saw is fitted with safety features such as blade guards and emergency stop systems for safe operation. Applications: Panel saws with scoring units are mainly used in woodworking and window manufacturing workshops for cutting wood and wood-based materials. They are particularly suitable for cutting boards, chipboards, MDF panels, and similar materials. The Cormak MJ45-KB4 stands out for its high precision. Technical Specifications: Table dimensions: 990 x 575 mm Sliding table length: 3200 mm Cutting width at rip fence: 1250 mm Cross-cutting capacity at crosscut fence: 3100 mm Saw blade tilt: 0° - 45° Saw blade diameter: Ø350 mm Saw blade bore: Ø30 mm Saw blade cutting height: 0-105 mm Saw blade cutting height at 45°: 0-73 mm Main saw spindle speed: 4000 / 6000 rpm Scoring blade diameter: Ø125 mm Scoring blade bore: Ø20 mm Scoring spindle speed: 8000 rpm Main motor power (S1/S6): 5.5 kW / 9 HP Scoring motor power (S1/S6): 0.75 kW / 1.2 HP Main dust extraction port diameter under table: 100 mm Blade guard extraction port diameter: 80 mm Machine weight: 680 kg The saw is sold without cutting blades. Price does not apply to machines sold in Poland.

Kondisi: baik (bekas), Tahun pembuatan: 1990, lebar pemotongan (maks.): 1.000 mm, ketinggian potong (maks.): 140 mm, panjang meja: 1.400 mm, daya: 5,5 kW (7,48 hp), Types: F 45, Machine no.: 90-8-86 Podotxh Niepfx Abuepl