N.C. PENGEBORAN & Dowels Memasukkan GARIS

BREMA (BIESSE Group) 2 x Vektor (GLR-X 30-13 + XK 40-13) + ID

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Prsdpfxsgwbbqs Adcoc Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 9.300 h, kapasitas angkut: 3.500 kg, tinggi angkat: 4.700 mm, pengangkatan bebas: 1.500 mm, pusat beban: 500 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.200 mm, tipe perpindahan gigi: otomatis, tegangan baterai: 80 V, berat baterai: 1.580 kg, panjang garpu: 1.150 mm, kondisi ban: 95 persen, Tipe ban depan: ban superelastis (hitam), tipe ban belakang: ban superelastis (hitam), berat kosong: 6.400 kg, tinggi total: 2.200 mm, Perlengkapan: garpu palet, geser samping, kabin, kopling trailer, pencahayaan, riwayat servis lengkap, Dijual forklift listrik Toyota bekas tipe 8FBMT 35 tahun pembuatan 2018 dengan tiang Triplex free lift! Tinggi konstruksi: 2,2m Tinggi angkat: 4,7m Kapasitas angkat: 3500kg Ban full karet 95% Side shifter hidraulik Pedpfoxzr E Ejx Adcsrc Panjang fork 115cm Termasuk charger Pada forklift sudah dilakukan overhaul pada dua motor penggerak dan as roda belakang, serta baterai juga sudah diganti baru! Forklift tersedia segera! Forklift siap langsung digunakan! Forklift dapat dilihat dan diuji coba di tempat kami! Transportasi dapat diatur sesuai permintaan!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Mesin press pneumatik untuk pengeleman kayu pada ketebalan. TECHFA tipe PTD 6000 Ukuran maksimum elemen yang direkatkan: Pedpfx Aeyivr Hsdcerc - panjang 6300 mm - lebar 160 mm - tinggi 850 mm Press dibagi menjadi 4 bagian.

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Separate electrical and control panel OMRON electronic control Prjdpfx Aded Rg Dpecoc Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, HYDRAULIC PRESS FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements The HSKG device is designed for high-pressure gluing of wooden components cut in thickness, using hydraulic cylinders. The compression force range per cylinder is 5-11 kN (horizontal) and 25-55 kN (vertical). Gluing takes place in a stack within the loading field dimensions. The stack is formed by hydraulic pressing between movable vertical beams and vertical slats of the cross cylinders. Both stack-forming elements are equipped with wooden or metal inserts matching the profile of the slat stack. Edge-gluing of wooden elements improves frame quality, reduces machining costs, and decreases wood waste. Technical and operational data (standard HSKG – 6m version): Number of loading fields: 4 pcs Dimensions of a single loading field: - loading height: 1,140 mm - slat length per field: 1,530 mm Maximum slat width: 150 mm Pedpfxstrl R As Adcorc Maximum length of glued elements: 3,120 mm Installed power: 3 kW Power supply: 3/N/PE, 400V 50Hz Control voltage: 24 V DC Number of cylinders per field: - Ø 50x100 – 3 pcs - Ø 80x100 – 3 pcs External dimensions (L x W x H): 8,120 x 1,000 x 2,300 mm Machine weight: 4,800 kg Upon customer request, we also manufacture alternative clamping cylinder control configurations depending on the envisaged length of the glued elements, as well as different lengths and numbers of individual working fields per press set, and a maximum working width of up to 220 mm with increased pressing force.

Kondisi: bekas, Komplette Sägelinie IDC000103 1. SÄGEGRUPPE Söderhamn Eriksson 240-12 ARI Vislanda KS12.2 Prjdju E Hu Depfx Adcec 2. SÄGEGRUPPE Söderhamn Eriksson 240-12 ARI Vislanda DS74+1 3. ARI Vislanda KT5A-230 Geschwindigkeit bis zu 60 m/min.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, The line is fully operational and was modernized in 2019. Upgrades included, among others, the hydraulic system and control unit. Minimum material thickness – 20 mm Predpfxeim Ez Dj Adcec Maximum material thickness – 130 mm Minimum material width – 30 mm Maximum material width – 130 mm Minimum input material length – 250 mm Maximum input material length – 1600 mm Minimum output material length – 250 mm Maximum output material length – 300 mm

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open Feed rate m/min (adjustable): 7-35 Top pressure: V-belt driven, spray unit (for liquid non-stick agent) Adjustable fence: CNC controlled. Panel feeding system A2 / 30 Jointing unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Prodpfsifnzdjx Adcec Edge magazine for rolls (compartments no.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Kondisi: bekas, Tahun pembuatan: 2019, Highly flexible vertical machining center for milling, drilling, and cutting. The BREMA patent for processing: Due to its vertical orientation, this machine series is by far the most flexible and productive machine at a very high quality level. In addition, the automatic return/rotation system for the panel enables fully automatic operation. The machine can process all 6 sides of a panel up to a height of 1300 mm. Working dimensions: * Length: 300 - 2500 mm * Height: 60 - 1300 mm * Thickness: 10 - 80 mm * Maximum weight: 50 kg Machine programming and control system using a PC with TPA Albatros software. The programming editor with high-level software interface enables simple and intuitive programming of the machine and also supports: * Linear, circular, and spiral interpolation * Double zero point * Mirror program management * Tool diameter optimizer for turret tools * Optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * Import of work lists in ASCII format * Extra key for programming from the office * Barcode reader for tools * 17-inch LCD monitor * Professional operating system: Windows 7 Panel feeding and handling is managed via motorized vertical transfer with rollers and rubber-coated pressers to clamp the panel during processing; the motorized conveyor is 2000 mm long with electronically adjustable speed via inverter control. Photocells and the NC program ensure the introduction of one or more panels in sequence with selector selection. Prjdsl Ikzgopfx Adcoc Height reading system for the panels consisting of an independent axis that can read the panel height before entering the machine. Reading tolerance of the dimension +/- 0.15 mm; if tolerance is exceeded, an alert is issued and the machine stops the current operation. System for reading panel thickness with a mechanical probe. Horizontal vice – M.O. axis: allows thickness of the workpiece to be measured by the program. Vertical vice – M.V. axis: allows the program to measure the height dimensions of the workpiece to be machined. Chain – X axis – patented double section with laser photocells that can read the reference zero point before performing operations. The double section allows processing on the underside of the panel, allowing machining on all 6 sides. Brushless motors with programmable speed control via NC. Drilling unit with independent spindles 7 + 17 x 32 mm: 24 independent spindles with a 32 mm pitch, arranged as follows: * 7 spindles aligned on the X axis * 17 spindles aligned on the Y axis Unit driven by a high-frequency motor enabling spindle rotation speed changes up to 7000 rpm. The brushless motor allows control of drilling depth and feed rate. Upper turret milling group with 10 positions and NC-controlled tool change. 11 kW motor with direct drive transmission to the tool up to 18,000 rpm. The rotation of the turret is performed by a controlled axis with a brushless motor, enabling...

Tahun pembuatan: 2006, Kondisi: baru, I am selling 12 sets of new saw blades suitable for HOLZMA panel saw machines. Main saw blade FABA 600 x 5.8 / 4.0 x 60 Z 72 Scoring saw blade AKE 26 200 45H 200 x 4.8 - 5.8 x 45 Z=36 Total price: 1,000 euros. Available immediately. Podpfx Ajg Dvutjdcorc